reading blocks PP after hardware upgrade

Similar Questions

• Reinstall an OS after hardware upgrades laptop

  I just bought a laptop HP 2000 series. Found that there not nearly at the speed I would like to and want to make improvements. Looking at bumping RAM 2 to 4 or 8 GB. In the research to upgrade CPU who perhaps understand a new motherboard as well. Don't think I'll be upgrading the HD right now, but always curious to know that if I do, how can I keep my current Windows 8? It came with the pc, so I have no backup discs and did I not a code. Will also change into effect of RAM and CPU something important that I should prepare in advance? Thank you.

  The RAM can be made easily. As you have on several versions of the HP 2000 processor is soldered to the motherboard. You'll find that the cost of a new mother/CPU card is more than you want to spend and less profitable to sell your laptop and buy something you like better.

  The key Code is integrated into the BIOS for Windows 8 systems. If you keep the same hard drive, it will work even with a new motherboard. The key Code incorporated in the new Board of Directors will be just activate as soon as you connect to the Internet.

  Upgrade memory will "work". You will not have to change anything.

  If you need a copy of the service manual or any other information post back.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• How to re - install the software OS and Thinkpad after hardware upgrade?

  I'm about to buy a SSD for my X 220.

  My recovery partition is on my current hard drive, so instead of the backup and restore of the entire hard drive, (I make a smaller hard drive) I want to restore the system from the recovery partition (new installation).

  How can I do? It works if I turn the internal hard drive externally using the attachment? But I think that it will not boot from that disk hard if I do that, then I don't know how to recover my OS X 220.

  Thank you.

  1. what, to buy a license? Do you have the ms COA sticker in the battery compartment?

  2. prepare the recovery media factory applet suitable the disk with Lenovo system preloaded. It could be the flash drive, 16 GB in size.

  3. it is possible to deploy two image .wim of partitions, one by one, Lenovo_Recovery on the drive target and its System_DRV and system parttions. But it also will some actions to set the parameters of the partitions.
  In a Word, there are several scenarios. Take a look this post, for example:
  https://forums.Lenovo.com/T5/X-series-ThinkPad-Laptops/restoring-OS-and-drivers-after-x230-HDD-repla...

• Failed to read the videos after the upgrade to Windows XP Service Pack 2 with Service Pack 3.

  Original title: I recently updated my windows xp service pack 2 with service pack 3. sound suddenly day now, I can not play videos on my pc. Please help me on this issue.

  Windows xp 2002
  service pack 3
  Intel celeron cpu 2.13 ghz
  504 MB of ram

  Hi Karthik,

  You receive messages or error codes?

  Given that you have upgraded to Windows XP service pack 2 (SP2) to SP3, you can try to upgrade the video card on your system and check.

  We can refer to the computer or the device manufacturer's Web site and try to update the drivers.

  How to manage devices in Windows XP

• Cannot activate Win XP Pro after hardware upgrades.

  Win XP Pro 32 bit. SP3 76487 ID-OEM-0027903-55213 I got this program for over 4 years with no problems.

  P4 2. 5 g

  in total, 4 g of RAM, 2 GB just installed.

  drive C: 160 g with the OS on it.

  120 g for data D: drive, etc. New install.

  2-drive r/w DVD we're new install.

  After you install a second hard drive, 2 GB of RAM and an another DVD player, I get a message that Windows must be enabled.

  The message does not specify that the OS is not genuine. Only, she states that because of new additions of material that I have to reactivate.

  When I click on the ball to activate, nothing happens, no glass icon:. I waited half an hour the last time. Connection Internet is fine.

  There is NO icon "activate Windows" or selection in Accessories > System Tools folder.

  If you could provide me with the phone number I will call to activate by phone.

  I DON'T want to reinstall Windows and losing all my links program.

  Thank you

  Mark

  Hi Mark,

  Follow the steps in the article.

  How to activate Windows XP

  http://support.Microsoft.com/kb/307890

• Can not activate after hardware upgrade

  I had to replace my motherboard and processor and windows now say that I need to activate my windows again. do I have to buy a new one yet?

  If your copy of Windows is a copy retail, no.  If it's an OEM copy, then Yes.  The life of OEM license and dies, with the motherboard - replaced the motherboard and the license is missing.

  writing in the new message: * e-mail address is removed from the privacy... *

  I had to replace my motherboard and processor and windows now say that I need to activate my windows again. do I have to buy a new one yet?

• Follow-up controls drive & optimizations of volume after FW upgrade to 6.0.6. ?

  This weekend I upgraded our 5.2.4H1 to 6.0.6 units. I can't find the exact wording right now, but I read somewhere that after the upgrade of the line to 6.x, disks are checked/cleaned rigorously with some new advanced algorithm to eliminate potential errors.

  Also, there should be some new algorithms to rearrange the volumes of the optimized volume load balancing.

  Can I follow this where newspapers?

  Car tracking events are not visible in the GUI or CLI events lists, until something happens.  Since this is a background process, and / if when a problem is encountered, the table will be the image of the player to one of the spare parts (13.2.3: commissioning of copy-for-parts of car-number of the disk to drive in car-number).  Mirroring is done to improve the performance of a reconstruction process.

  Regarding the volume of load balancers, this is discussed here: www.dellstorage.com/.../DownloadAsset.aspx

  -joe

• DRM is missing after a hardware upgrade.

  I recently updated my motherboard computers and processer and now it seems that the DRM files are missing which means of course that I can't play any of my procected DRM music files, even if my computer has a backup of the license. To be able to play my new music I need to re - install Windows XP or y at - it another way of retreving my missing data of DRM?

  I am currently using Windows XP Home Edition, Service Pack 3.

  Before you change the hardware, you must back up your licenses.
  I hope that this article will help you:

  "You may be unable to read content protected after your computer hardware changes.
    <>http://support.Microsoft.com/kb/891664 >

  HTH,
  JW

• How to restore licenses Playready DRM for TV recorded after a hardware upgrade?

  See the thread that I started:
  http://www.thegreenbutton.TV/forums/viewtopic.php?f=5&t=1109

  At the end of this thread for my question about what breaks the Playready DRM, I stated here:
  http://support.Microsoft.com/kb/891664

  If there is an updated version of this KB article applicable to Windows 7 with Windows Media Player 12, then a pointer to such an article would probably prevent the need to respond to everything that follows.  For now, I guess there is no update instructions for restoring licenses.

  In time, I was reassured by Microsoft KB article that I could upgrade my HTPC hardware without losing the ability to play shows I had already recorded.

  I don't think much more on this subject until recently, when I decided that the time had come to make an upgrade.  So I went back to the article to see exactly what I had to do in preparation for the upgrade.  The first thing he says for me to do is to back up my licenses.  However, I am running Windows Media Player version 12 (which is what came with my Windows7 Home Premium), and it doesn't seem to provide a mechanism to back up the licenses.  This means that no such possibility of license-recovery-after-upgrade is available for me?   Or are there other mechanisms to back up my licenses?

  Even if there is another way to back up the licenses, I see that restore them after the upgrade still requires a feature that my version of Windows Media Player does not.  Then I also need access to an alternative mechanism of restoration.  Is this one?

  Looking around Windows Media Center, I can't find anything about the license management here either.

  Considering the article like a Kipper full in Windows 7, my ultimate real question is that in the header for this post.

  TV record types we are talking about here have copy - once protection and are recording using Windows Media Center has a CableCARD tuner.  I have a lot of them that I am not prepared to remove spied.

  Hi DavidVanserschel,

  You may be able to manually reset DRM licenses. Take a look at the steps in this thread.

• After the upgrade to the latest Windows Live Mail, an e-mail from blocked senders is no longer sent to junk. How can I fix it?

  After the upgrade to the latest version of Windows Live Mail, an e-mail from blocked senders is not moved automatically moved to the junk e-mail folder. The list of blocked senders of origin has been deleted during the upgrade, but I recreated it - but nothing moves in the junk e-mail folder, unless I have manually mark a message as junk. How can I fix it? [Windows 7]

  Using POP3 e-mail accounts - all good until you upgrade.

  For some users, the junk mail filters do not work on a new installation. A fix usually know them. All closed Windows Live programs, type wlarp in the start search box and press enter. In the window that opens, select repair...  When it is finished, restart the computer, then launch WLMail and test.

• SD card is available in read-only mode after upgradation of KITKAT in HP slate voicetab 7?

  Hello

  I'm unable to access my external in write mode card after the upgrade to KitKat.

  I also formatted my card, the problem persists.

  I use HP files and also the commendar exploreres file manager to access files/folders.

  Please fix as soon as POSSIBLE.

  Hello and welcome to the HP support community!

  Google has changed the way Android works, not HP.

  Maybe this article can help to explain the evolution of Google Android KitKat 4.4:

  KitKat and SD - what is fixed, what's broken and what is misunderstood.

  WyreNut

• Pavilion DV6-2140ED: Pavilion DV6: 10 Windows does not start after the upgrade memory (4 GB-&gt; 8 GB)

  After I upgraded the RAM in my HP DV6 from 4 GB to 8 GB (2 x 4 GB Kingston KTA-MB1333 / 4G), Windows no longer starts. I get a blue screen and it keeps restarting.

  I think that the memory specifications are similar to the Samsung M471B5673EH1-CH9 original memory: Ghz 1333, non - ecc, 1.5 volts, case latency 9 etc.etc.

  It's a laptop DV6-2140ED HP with a processor Intel i5 - 430 m and Intel mobile chipset HM55.

  The bios detects 8 GB and it also passes the check/test of memory. As far as I know that I have also installed the latest bios firmware: F.1D. Reinstall my Windows 10 64 bit does not work either: with 8 GB I also get blue screens, after I try to boot my Windows 10 bootable USB drive.

  I read other people having the same problem, but I have not read a solution yet. What can we do about it?

  Hello:

  Please see this discussion.  You buy a very specific memory for any HP laptop with Mobile Intel 5 series chipset.

  http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/memory-upgrade-6550b/m-p/5340551/highlight/true#M207994

• Hardware upgrade of 4 servers windows 2003 7

  I just upgraded my Commvault software to version 9, with de-DUP.

  I noticed that my CF band is only changing to 100bm Brook.

  I read on the hardware upgrade to version 7.

  I have 14 VM to upgrade all the 2003 win. All have the latest tool installed 4.1

  Is there a there has been has I should look for before I start to put it off?

  before upgrade you the virtual hardware, you must upgrade the comment of VMware tools.  In an engine, the customer is off State, you can upgrade the virtual hardware.  From there on, turn on the prompt, login, let windows find all new device drivers and then restart again.  Here you connect and remove all devices shaded in Device Manager... Usually, restart us once more after that.

  With regard to the witch hunt.  If you are concerned, you can always snapshot the prior comments to the upgrade and if there are problems, return back.

  See the KB article how to properly uninstall the old drivers

  http://support.Microsoft.com/?kbid=269155

• ESXi host and VM hardware upgrades

  Hi all

  I pretty well know the answer to these questions (I like to read manuals), but I just wanted a few reassuring those who have ventured in front me.

  1 / when the upgrade to ESXi hosts of 3.5 to 4.0, it is my understanding that there is no real emergency in the upgrade of the host of the virtual computer (tools and hardware to version 7) as vSphere 4.0 will run happily with the older virtual machine (but without the new features).  However, I am wondering if anyone has experienced problems do not upgrade the machine virtual shortly after the upgrade of the host.  My intention is to do it very shortly after, but sometimes the best-laid plans go out the window in my role, so I'd feel comfortable if I new I could run the old VM indefinitely without any problem.

  2 / how 'security' is upgraded version of the VM from 4 to 7 material?  VMware I don't expect any problems, but I would like to know if anyone has experienced problems that can cause interruptions of service extended to the VM guest.

  Thanks in advance,

  Steve.

  1. I would separate between VMware tools and hardware upgrade. New tools not only to upgrade virtual hardware drivers, they also inflating to update and other features VMware uses to communicate with the guest operating system. In my opinion, you should pass the VMware tools as soon as possible. I can't say for sure if you have any questions without upgrading. My personal opinion/experience, is that during the "normal" old tools will.

  The hardware upgrade should not too important. In environments with hundreds of guests, you will actually have to update all hosts (in a cluster) material in order not to lose the capacity of invited guests 3.5 vMotion.

  2. the only issues I've had so far with the upgrade of the hardware have been networked. I had a few VMs to reconfigure the network manually after the upgrade.

  André

• After the upgrade to v26.0 - text in textarea boxes is spread out on the page

  After the upgrade to version 26.0 - I'm on windows XP, all text in textarea boxes spill out of the box and on the page. Text wrapping is disabled.

  It always happens like that: I load a page with a textarea box that contains a lot of text in there. TextWrapping is off. At first, everything seems fine. Then about 3-5 seconds later, the text spills on the scroll bars, then another 2-3 seconds more late as he spills on the page. Sometimes in both directions, usually rollovers to the right.

  Resizing the browser window makes no difference.
  Also using the scroll bars in the text box makes no difference.

  I uploaded a screenshot of the problem here:
  http://studiox.com/LoremIpsum.jpg

  Thanks for the recommendations and help you can provide

  Is it preformatted text? In this case, of course, the overflow should be hidden and do not pour through the window of Firefox.

  When the screen goes haywire, I first think of a graphics card driver incompatibility. Sometimes it is triggered by a change in Firefox, while in other cases, it may be the result of a driver or an OS update. Try to disable the use of hardware acceleration of graphics Firefox to work around the problem.

  the button Firefox orange (or the Tools menu) > Options > advanced

  In the mini ' General' tab, uncheck the box for "use hardware acceleration when available.

  It will take effect after restarting Firefox. Any difference?