Can not activate after hardware upgrade

Similar Questions

• Can not activate after upgrading my motherboard

  I installed a new motherboard in my computer and I can't activate new vista

  Do you use an OEM license that was sold with the OEM hardware? in this case, the license was delivered to your old motherboard. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Pavilion dv6: Intel Centrino Wireless - n 2230 will not activate after the upgrade to Windows 10

  Model A3E82AV number

  I've been avoiding Windows 10 because I knew something like this was going to happen, but I took the pludge.  Anyway, everything seemed to work but my wireless adapter.  After the upgrade, the rocker on the keyboard turns on and outside airplane mode, and I can't switch to map wireless in Windows settings.
  
  I can get wireless adapter to turn on, go into that in a minute, but if I shutdown or reboot, the problem returns.
  
  I had success in the driver update, or by manually installing the driver, I even read a tip to make the battery, hold the power button down while the battery is out and run it upwards.  I tried to reset the BIOs to default settings.  When the computer feels like it, the wireless adapter will start working after a reboot.  If I have the toggle switch, the light goes from orange to white, I can then activate wireless and connect to my SSID.  If I stop or restart, my wireless NETWORK card no longer works and we return to the toggle keyboard turning power on and off airplane mode.  Device Manager says it is working normally and the drivers are up to date.

  I read a post from microsoft that says VPN adapters could cause corruption while making the upgrade.  I'm a professional, so I got a handful of cards, but also virtual cards VMWare Workstation installed, so I tried to come back to Win 7, remove the adapters, are re-upgrade.  It does not solve the issue.  While I was back in Windows 7, everything worked most of the time, but there were some problems with the programs, etc. which would not work right.  When I upgraded to Windows 10, some of these problems persist, so I checked my backups to make sure they were up to date and did a new install of windows 10.  I am now running a new image with just firefox, associate of HP and the different drivers Intel, I tried to install, and I still can't get the card wireless to tour consistantly on / off power after a reboot.  I thought for sure the nuclear option could solve the problem now I can't even go back to Windows 7.  I did mention to try some recommended drivers Intel, I found in other posts... I also tried to uninstall the driver, and install in compatibility mode, but that has not worked, either.
  
  This one had me scratching my head.  I tried literally everything I can find on the internet in an attempt to solve the problem, and nothing will keep the work of consistantly wireless NETWORK card.  Any other ideas out there?
  
  Looking at the forums, appears not to have a lot of people in all areas of this issue with different brands of computers and network interface cards.  If anyone knows anything else to try, I would really appreciate it.

  FIXED!

  I think so.  I downloaded and installed the bios for Windows 8.  After that, I managed shutdown and booted my laptop 3 times and restarted once.  Every time you start after the installation of the firmware BIOs, the card automatically turned on and connected to my SSID NETWORK.  Since the upgrade to Windows 10 I saw not the laptop automatically start and connect the wireless NETWORK card and he did successfully 4 times now.
  
  The file that I downloaded from the HP Web site was update the BIOs for Windows 8 version F.2D rev A.  The file name is sp68425.  I will continue to monitor and make sure that it was indeed the fix, but all great so far.

  For people who can run on the same topic, here's a recap of what I did to solve my problem:

  Centrino 2230 installed 15.18.0.1 driver
  Update driver Bluetooth 10.0.10586.0

  Updated the BIOS to the version of Windows 8 F.2D Rev A
  
  If you decide to play with the BIOs firmware, just be aware that if things go well, you could cause more damage to your system.  I would only try this method if you are uncomfortable for the recovery of a faulty BIOS installation.

• Can not activate hearing CS6 upgrade - help!

  Any employee to support Adobe Audition:

  I downloaded Adobe Audition CS6 and installed without problem.

  I try to activate it, but all the codes I use are rejected.

  I initially bought full version of Adobe Audition 1.5 and purchased upgrades for 2.0, 3.0, CS5.5 and CS6

  The activation process will not accept my CS6 upgrade code, or my original code 1.5 - or anyone else in between!

  How to activate it?

  Note: I have correctly installed and activated on an another existing MacBook Pro - CS6 also mine - and I intend using only one copy at a time - this last installation is done on a MacBook Air for remote working, portable (mainly in the form of work to freelance in the rooms). Is it possible to have it installed and activated on two Macs? I rang Adobe when the version 2 for PC and they indicated that installation on several computers was OK if personal and using a single copy at the same time - maybe it has changed?

  Any guidance appreciated.

  Thank you

  Kevin.

  you will need your serial number of the cs6, quickly find your serial number

  and it can be attached to your account, Adobe ID Code

  because it is a series of upgrade, after entering your serial number cs6 you will be presented with a drop-down list or products qualifying.  Select one (for example, cs 5.5) and you will be asked to enter the serial number of his (cs5.5.).

  Enter the correct number at the right time and to proceed with the installation

• Can not activate after the failure of the motherboard

  I bought a Windows version that can be installed on 3 computers. After TWO failures of motherboard, I can't activate Windows now. When I tried to activate via phone the automated message says that I already used the maximum number of computers for the key. It's very frustrating because I had a motherboard last less than a year and a second last only a month or two. Now, my system works great but I can't activate it. It's frustrating.

  Try the phone activation when you talk to a real person

  How to activate Windows 7 manually (activate by phone)

  1) click Start and in the search for box type: slui.exe 4

  (2) press the ENTER"" key.

  (3) select your "country" in the list.

  (4) choose the option "activate phone".

  5) stay on the phone (do not meet all the automatic guests) and wait for a person to help you with the activation.

  (6) explain your question clearly to the support person.

• Can not activate after the factory restore

  Sir, some of the files in my windows vista is currupted and the service engineer recommended to reload vista. but, in doing so, my pre loaded original vista not be enabled. kindly help...

  How can I activate my original vista sp2

  Pankaj,

  Try the System File Checker tool

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista http://support.microsoft.com/kb/936212

  How to activate Windows Vista http://support.microsoft.com/kb/940315

• Can not start after the upgrade OTA (open from the Spain ZTE) v1.1

  Hello

  I got my ZTE Open (Spain) pretty well work very well with the official 1.0.1 upgrade of ZTE (for the Spain model). So today I got a new system update available (30 MB +) and proceed to download the upgrade.

  After a while, the phone has restarted and kept in the loading screen restart again and again. I did a soft reset tested, factory reset and did not work.

  Then, as I found that the update has been stored in the SD (updates/fota/update.zip), I tried to apply it again but got "error in /tmp/sideload/package.zip". This is my journal of recovery: http://dpaste.com/1420406/

  I tried also downgraded to v1.0.1 but I can't because he complains is not System v1.0.0.

  I hope someone can tell me a solution, I live in America South and bought this phone from Spain, so you have to return it will be not easy or quick.

  
  

• iPad can not activate after update 9.3 iOS. "Incorrect Apple ID" used message, when it obviously isn't

  After the update to iOS 9.3 my 2 Mini iPad fails to activate.

  I get the message 'wrong apple ID' all the time, even if its my correct apple ID, that works on iTunes and iCloud, etc..

  I tried the activation via iTunes recovery mode and DFU mode, but nothing helps. I do not think it's a problem of server activation, this looks more like a problem with activation ID.

  I also tried to remove the device from iCloud, remove the device to locate your iPhone and even changed my password Apple ID.

  Is this a possible iOS Malware hack "Keyraider"?

  It is more likely that it is a bug on the Apple name, given the large number of threads with people having the same problem. Especially people with older devices.

  You may only be stuck waiting for them to sort out if restore via iTunes did not work for you.

• Y430A can not boot after memory upgrade

  OS: VISTA HOME PREMIUM 32-BIT
  CPU: P7350
  MEMORY: HYNIX DDR2 667 2GB

  I added a 2 GB Kingston ram on the connector 2

  First of all, it can be the start and connect to windows,

  but after a while, the system of suspension or the SCREEN BLUE DEAD shows,
  He cannot even get into the bios screen when I reboot it

  but it can be boot up if I remove and reconnect the memory

  Sometimes the machine can be restarted and works correctly, except if once I turn it off

  I tried to exchange the slot 1 and 2 with 2 x 2 GB,

  and also replace with 2 x 256 MB Hynix memory.

  but it does not work.

  The new memory is not faulty or is not compatible because it works very well if it autonomous.

  In short, if I install 2 x 2 GB memory, the system may start only once.

  Is it the BIOS problem or it's my mistake?

  Please help and sorry for my bad English.

  Thanks in advance.

  This is perhaps due to the incompatibility of the modules of RAM, working together. If Yes, than to change only the modules will help.

  Also looks like Y510 behavior when it was a fresh model - Y510 all were not able to manage two RAM modules. Update the BIOS helped. For now no new BIOS for Y530/Y430, so will have to wait.

• Can not activate after reinstalling code 0xC004C008

  Hello

  I recently changed the motherboard in my computer because of the failure.  I reinstalled Win 7 and tried to start.  He failed online and phone support system could not unlock.  I use a key to upgrade of family 3 Pack that has never been installed on 3 computers.  I was under the impression that the rules of this East fell under the 'detail' and not OEM so that I can install it even if I changed the motherboard.

  Please let me know.

  Thank you

  John

  How to solve the error codes on Windows 7 0xC004C008 Activation of Volume
  http://Windows.Microsoft.com/en-us/Windows7/Windows-7-activation-error-0xC004C008

• Can not activate after motherboard change

  Change of motherboard even care. like an old, now windows wants to activate my product key. Typed in back lable of round numbers, but does not recognize the product key. This software has been installed at the factory of gateways.

  The problem is twofold.  First of all, the product key is already registered as being used (on the PC).  Second, the product key is associated with the mother and changing card that makes it seem like this is a new computer that you are trying to use the product key.  The solution is to activate manually.

  To activate manually, go to start, search, and type in slui 4 enter.  Enter your country and press Next.  You will be on a screen with a phone number and a bunch of codes below.  Dial the number and browse automatic guests until you get to a human being.  Have your handy product code because it will be asked.  Explain the situation, but it's the same PC and only installed on this PC.  They should give you a code to enter on this screen to activate Vista.

  I hope this helps (it should).

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Can not activate after reinstalling

  My HD failed in part freezing way often, I realized that the HD was the problem, then I saved most of the files in a portable H.D.and replaced the condemned H.D.on my laptop with a new and re - install windows, why can't use the same key?...

  He thinks that the key is already in use (on the old HD).  You have to manually enable.

  To activate manually, go to start, search, and type in slui 4 enter.  Enter your country and press Next.  You will be on a screen with a phone number and a bunch of codes below.  Dial the number and browse automatic guests until you get to a human being.  Have your handy product code because it will be asked.  Explain the situation, but it's the same PC and only installed on this PC.  They should give you a code to enter on this screen to activate Vista.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows 7 Pro is more authentic / can not activate after virus repair

  I have a user who has a laptop with Windows 7 Pro on this subject. He had been in service for a few years with no problems until he got a nasty crypto virus. We were able to restore to a recovery point, but after that, it began to have "this copy of Windows is not genuine". The Windows OEM sticker on the bottom of the laptop is more readable, but its product key shows in the properties system (just not turn on). I even tried to change is a different product key Windows 7 Pro we have is not in use (but it does not work).

  cmd > sfc/scannow not returned no errors/violations

  Here are the results of diagnostic tests:

  Diagnostic report (1.9.0027.0):

  -----------------------------------------

  Validation of Windows data-->

  Validation code: 50

  Code of Validation caching online: 0xc004c4a8

  Windows product key: *-* - KHG3X - JMB6G-7CVCF

  The Windows Product Key hash: xGMY + Ew0zO + PzihlBgDAkHcWxVc =

  Windows product ID: 00371-OEM-9044495-99180

  Windows Product ID Type: 3

  Windows license Type: OEM System Builder

  The Windows OS version: 6.1.7601.2.00010100.1.0.048

  ID: {8B1BED97-3B05-40D3-95B3-2B39C1EF93C9} (1)

  Admin: Yes

  TestCab: 0x0

  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002

  Signed by: n/a, hr = 0 x 80070002

  Product name: Windows 7 Professional

  Architecture: 0 x 00000009

  Build lab: 7601.win7sp1_gdr.160121 - 1718

  TTS error:

  Validation of diagnosis:

  Resolution state: n/a

  Given Vista WgaER-->

  ThreatID (s): n/a, hr = 0 x 80070002

  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->

  Cached result: n/a, hr = 0 x 80070002

  File: No.

  Version: N/a, hr = 0 x 80070002

  WgaTray.exe signed by: n/a, hr = 0 x 80070002

  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->

  Cached result: n/a, hr = 0 x 80070002

  Version: N/a, hr = 0 x 80070002

  OGAExec.exe signed by: n/a, hr = 0 x 80070002

  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->

  Office status: 109 n/a

  OGA Version: N/a, 0 x 80070002

  Signed by: n/a, hr = 0 x 80070002

  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->

  Proxy settings: N/A

  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)

  Default browser: n/a, hr = 0 x 80070002

  Download signed ActiveX controls: fast

  Download unsigned ActiveX controls: disabled

  Run ActiveX controls and plug-ins: allowed

  Initialize and script ActiveX controls not marked as safe: disabled

  Allow the Internet Explorer Webbrowser control scripts: disabled

  Active scripting: allowed

  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->

  Office details: {8B1BED97-3B05-40D3-95B3-2B39C1EF93C9}1.9.0027.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-7CVCF00371-OEM-9044495-991803S-1-5-21-3880183284-1484164813-833090442AcerAspire V5-571Phoenix Technologies Ltd. V1.10. 20120608000000.000000 + 0005DC73A07018400FE04090409Eastern Standard Time(GMT-05:00)13ACRSYSACRPRDCT109

  Content Spsys.log: 0 x 80070002

  License data-->

  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Professional edition

  Description: operating system Windows - Windows (r) 7, channel OEM_COA_NSLP

  Activation ID: e120e868-3df2-464a-95a0-b52fa5ada4bf

  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f

  Extended PID: 00371-00180-444-999180-02-1033-7601.0000-0622016

  Installation ID: 011970000321964923468051433710778873613154368265867316

  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338

  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339

  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341

  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340

  Partial product key: 7CVCF

  License status: Notification

  Reason for the notification: 0xC004F200 (non-genuine).

  Remaining Windows rearm count: 5

  Trust time: 02/03/2016 08:18:17

  Windows Activation Technologies-->

  HrOffline: 0x00000000

  HrOnline: 0xC004C4A8

  Beyond: 0 x 0000000000000000

  Event timestamp: 12:7:2015 08:17

  ActiveX: Registered, Version: 7.1.7600.16395

  The admin service: recorded, Version: 7.1.7600.16395

  Output beyond bitmask:

  --> HWID data

  Current Hash HWID: NAAAAAEAAQABAAEAAAACAAAABQABAAEAonZC1HhUxgToZ6R5HLzSTvD1AjV0DMANhlqWYw ==

  Activation 1.0 data OEM-->

  N/A

  Activation 2.0 data OEM-->

  BIOS valid for OA 2.0: Yes

  Windows marker version: 0 x 20001

  OEMID and OEMTableID consistent: Yes

  BIOS information:

  ACPI Table name OEMID value OEMTableID value

  APIC ACRSYS ACRPRDCT

  FACP ACRSYS ACRPRDCT

  HPET ACRSYS ACRPRDCT

  MCFG ACRSYS ACRPRDCT

  SLIC ACRSYS ACRPRDCT

  SSDT ACRSYS PtidDevc

  ASF!                                     ACRSYS ACRPRDCT

  FPDT ACRSYS ACRPRDCT

  SSDT ACRSYS PtidDevc

  SSDT ACRSYS PtidDevc

  UEFI ACRSYS ACRPRDCT

  UEFI ACRSYS ACRPRDCT

  POAT ACRSYS ACRPRDCT

  DMAR                                 INTEL                     SNB

  UEFI ACRSYS ACRPRDCT

  According to your report, you have licensed OEM System Builder installed, not an OEM SLP license that normally comes preinstalled on laptops as your Acer.

  Try entering the following key:

  YKHFT-KW986-GK4PY-FDWYH-7TP9F

• Can not activate after installing a new motherboard under Windows 7 Ultimate

  Hello everyone I formatted my pc because I installed a new motherboard, now when I want to reactivate my window tells me that the product key cannot be used on this pc, my windows is 7 ultimate and not OEM

  You should follow the advice of André and use the phone activation method. There should be someone who speaks English to help you with the activation.

  Next time do not change the report, there is nothing in there that someone might use or rob you.

  Try activating the phone and after another report.

• can not activate after the failure of hard drive

  My copy of 13 elements was on my old machine who has suffered irreparable damage. I have reinstalled on the new machine with the activation key and everything was Ok for a couple of tracks. Then, I got a message to the effect either to confirm the old disabled machine or insert the new key. I chose the first, and again, everything was OK. I now have this message again and no access to the program. How can I convince someone, somewhere the old installation has been extremely disabled / support pages are little understood.

  Go here:

  Enable and disable Adobe products

  and get off all the way up still need help? Contact us and continue to work your way through the different screens, even when it looks like you will loop back to where you just were, until you finally reach the page where you can start a chat session. Only manage activation can solve the problem.