Reading data from a queue - store quick loop, slow loop display

Similar Questions

• Read data from table of $ E and insert in the staging table

  Hi all
  
  I'm new on ODI. I need your help to understand how to read data from a table ' E$ "and insert in an intermediate table.
  
  Scenario:
  
  The name of two columns, in a flat file, the employee and the employee id must be loaded into a data EMPstore +. A check constraint is added so that the data with the employee names in capital letters only to load in the data store. Check the command is set to the static movement . Right-click on the data store, select control , then check. The lines that have violated the check constraint are kept in E$ _EMP+ table.
  
  Problem:
  
  Problem is I want to read the data in the table E$ _EMP+ and transform in capital letters in the name of the employee and move the corrected data of E$ _EMP+ EMP+. Please advise me on how to automatically manage the 'soft' exceptions in ODI.
  
  Thank you

  If I understand, you want to change the columns in the tables of $ E and then load into the target.

  Now, if you notice how ODI recycles the error, there is an incremental update to the target using the E table $ after he filled the I$ table.

  I think you can do the same thing by creating an interface using the table of $ E as source and implement the business logic in this interface to fill the target.

• Can read data from xls using teststand 3.5?

  Hello

  I use 3.5 TestStand and LabVIEW 8.je know these are quite old versions now, but we must continue with this on a test bench.

  My question is how can I read data from the file xls using TestStand 3.5? I have already mentioned a few posts on this, and one response suggested that I should use "tGetExcel" using ActiveX adapter. I tried to run the test example related to "http://forums.ni.com/t5/NI-TestStand/Write-or-read-to-Excel-from-TestStand/td-p/250439/highlight/tru...", but a run-time error. He says that "the tGetExcel type library information not found. Make sure that the server is registered in the system.

  TestStand 4.2, I could easily run excel at the base of operations by using the Office Excel Toolkit.

  I was wondering, is there another way, I can read just .xls file data by using Teststand 3.5?

  Thank you

  Niraj.

  Please check this example for charger of property:

  C:\Program Files (x 86) \National Instruments\TestStand 3.5\Examples\LoadingLimits

  This shows the limits of excel file loading.

  But you can load the values of the variables-consult the help file / Reference manual for this type of step.

  Also in the loader type forum search property - you can find more information.

  I hope this helps.

• read data from xlsx file

  How to read data from an Excel 2010 worksheet with the .xlsx extension?  The data I want, it's on one of the 10 tabs in the file, I have to choose which programmatically.  I have the Report Generation Toolkit for LV2012, but all the screws that come with it seem to focus around writing data to a spreadsheet Excel and make charts and whatnot.  I want to * read * an Excel worksheet.  Seeking answers led to many 'Open it and save it as tab delimited text', which I can't do because I need data from different tabs, and because this file is quite dynamic with many users opening and adding several times.  In order to save the tab I want as a tab delimited text file per programming, I'm back a square, how to open it?

  My solution would ideally fill in the blanks of: spreadsheet.xlsx---> _---> 2 or 3D data table.

  Thank you

  Adam

  This fixes:

  https://decibel.NI.com/content/docs/doc-3033

• How to read data from an excel and HTML file

  Hello

  I write a 2D-array of string in Excel/HTML file using the generation of reports.

  Can someone tell me how to get back in return, the written data, same files again and display in table format.

  Thank you & best regards

  Visuman

  You can use activex to read data from the excel fileback to the table format... through this vi... may b this will help you...

• Add a data from the migration store

  I am using esxi 3.5 and will soon add a NAS device: http://www.backupworks.com/Iomega-ix4-200R-34540.aspx

  I would like to move the data store to copy my server esxi to this device so that I can share data on a nas device with a second esxi server that I'm raising soon.

  Is there a way to transfer the data from my internal store of data to the NAS device?

  Thanks in advance.

  Jeff

  You can enable ssh on the ESXi host since the Console is not supported .

  edit /etc/inetd.conf and uncomment the line ssh.

  PS | grep inetd

  kill - HUP the inetd PID

  You should now have ssh access. You can schedule the script from a crontab or?

  I have been using ssh access keys, but just found an article of http://kb.vmware.com/kb/1010287 of vmware.

• Reading data from a text (JS CS3) file tabs-delimited

  Hi - I'm working on a script to read data from a text file and use in a dialog box. But I hit a wall.

  I used a script from a previous post that defines a variable text document when the user script he chooses from a drop-down list.

  var myDialog = app.dialogs.add({name:"Map",canCancel:true});)
  {with (MyDialog)}

  {with (dialogColumns.Add ())}
  {with (borderPanels.Add ())}
  staticTexts.add ({staticLabel: "choose the location :"});})
  {with (dialogColumns.Add ())}
  
  var file = File("~/Desktop/myPlacesfile.txt");

  leader. Open ("r");
  var str = file.read ();
  leader. Close();
  var myPlaceList = str.split (/ [\r\n] + /);
  var myPlaceMenu = dropdowns.add ({stringList:myPlaceList, selectedIndex:0});})
  }
  }}}
  Ditto var = myDialog.show ();
  if(myResult == true) {}
  If (myPlaceMenu.selectedIndex == 0) {}
  myPlace var = ' - undefined ";
  } else {}
  myPlace var = myPlaceList [myPlaceMenu.selectedIndex];
  Alert (myPlace);
  }

  myDialog.destroy ();
  }

  That's what I do now:

  The text file is in this format:

  Value1 value2 [TAB]

  Value1 value2 [TAB]

  Value1 value2 [TAB]

  I need to have the drop down dialog box show only the value 1, and after that the user selects, the script returns only the value 2. (The alert is just there to test - I'm doing something else with the variable).

  Is there a way to view the first part of a tab-delimited line in the menu drop down and return the second half as a variable?

  Any help would be greatly appreciated.

  Thank you

  One of the possibilities is that it. Create a table to the left of the values of the tab of the dialog box. Then create an object that you use it as a table of correspondence. Roughly as follows:

  same thing as what you have

  leader. Open ("r");
  var str = file.read ();
  leader. Close();
  var array = str.split (/ [\r\n] + /);

  'pairs' are the table of correspondence

  pair of var = {};

  as before, 'myPlaceList' will be used for the menu drop-down
  var myPlaceList = [];

  var v;
  for (var i = 0; i)< array.length;="">
  {
  v = table [i] .split ('\t');
  pairs [v [0]] = v [1];
  myPlaceList.push (v [0]);
  }

  Add the drop-down list as before:

  var myPlaceMenu = dropdowns.add ({stringList:myPlaceList, selectedIndex:0});})

  the table of 'pairs' correspondence is used as follows: pairs ['value1'] returns 'value2 '.

  so in your script that would be:

  myPlace var pairs = [myPlaceList [myPlaceMenu.selectedIndex]];

  Peter

• read data from emparray

  I have a function that I would read in pl/sql. How can I read data from it. EMPARRAY function return.
  
  FUNCTION META_PODATKI_TABEL
  (ime_tabele VARCHAR2, st_napake NUMBER
  )
  RETURN EMPARRAY ACE
  
  
  EMPARRAY is:
  create or replace TYPE "EMPARRAY" as VARRAY (10000) OF VARCHAR2 (4000);
  
  
  I try but nothing works.
  
  THX

  Put the function calls in the clause of a query using the TABLE from:

  SQL> create or replace TYPE "EMPARRAY" as VARRAY(10000) OF VARCHAR2(4000);
    2  /
  
  Type created.
  
  SQL> create or replace FUNCTION META_PODATKI_TABEL
    2  (ime_tabele VARCHAR2, st_napake NUMBER
    3  )
    4  RETURN EMPARRAY AS
    5  begin
    6  return emparray('aaa','bbb','ccc');
    7  end;
    8  /
  
  Function created.
  
  SQL> select * from table(META_PODATKI_TABEL('x',1));
  
  COLUMN_VALUE
  ------------------------------------------------------------------------------------
  aaa
  bbb
  ccc
  

  Max
  http://oracleitalia.WordPress.com

• Read data from APEX_ITEM

  Hi all
  
  I searched the forums, and unfortunately I have no idea on how to go on the following.
  
  I have the following SQL report created with APEX_ITEM. SELECT_LIST-
  
  > select id, questions, APEX_ITEM. SELECT_LIST (p_idx = > 1, p_value = > '- Select Rating-', p_list_values = > 1, 1, 3, 3, 5, 5', p_attributes is > "style =" "color: Black;"', p_show_null = > 'YES', p_null_value = > NULL, p_null_text = > '- Select Rating-', p_item_id = > ' the ROWNUM # f01_ #', p_item_label = > ' label for ROWNUM f01_ # #', p_show_extra = > 'NO') 'Rating' of the sqa_customer_questions by id order
  
  Query runs as you like, but I don't know how to accept the values of the rows. I would like to insert the values of the selection list and their respective ID for all the entries in another table. I'm not able to find out how I could read data from these APEX_ITEMs and reach my goal.
  
  Any help is appreciated.
  
  Kind regards
  Jean-Pierre

  Nope,

  Can you put the app on apex.oracle.com

  In any case if you have a report like this

  SELECT id,
                  something
  FROM table
  

  You can do it for the

   SELECT id||APEX_ITEM.HIDDEN(2,id) id,
                  something
  FROM table
  

  And then reference it as APEX_APPLICATION. G_F02 (the first parameter provided to apex_item determine the number) in your process.

  See you soon

  Ben
  http://www.munkyben.WordPress.com
  Don't forget to mark the answers useful or correct ;)

• read data from a serial port

  Hello to everyone
  I use oracle forms 6i. I want to read data from a serial port. How can I do this?

  HII,

  You may search for any existing OCX or VBX component capable of doing this job.

  Better compliance
  Skyniazi

• global variable functional to read and write data from and to the parallel loops

  Hello!

  Here is the following situation: I have 3 parallel while loops. I have the fire at the same time. The first loop reads the data from GPIB instruments. Second readers PID powered analog output card (software waveform static timed, cc. Update 3 seconds interval) with DAQmx features. The third argument stores the data in the case of certain conditions to the PDM file.

  I create a functional global variable (FGV) with write and read options containing the measured data (30 double CC in cluster). So when I get a new reading of the GPIB loop, I put the new values in the FGV.

  In parallel loops, I read the FGV when necessary. I know that, I just create a race condition, because when one of the loops reads or writes data in the FGV, no other loops can access, while they hold their race until the loop of winner completed his reading or writing on it.

  In my case, it is not a problem of losing data measured, and also a few short drapes in some loops are okey. (data measured, including the temperature values, used in the loop of PID and the loop to save file, the system also has constants for a significant period, is not a problem if the PID loop reads sometimes on values previous to the FGV in case if he won the race)

  What is a "barbarian way" to make such a code? (later, I want to give a good GUI to my code, so probably I would have to use some sort of event management,...)

  If you recommend something more elegant, please give me some links where I can learn more.

  I started to read and learn to try to expand my little knowledge in LabView, but to me, it seems I can find examples really pro and documents (http://expressionflow.com/2007/10/01/labview-queued-state-machine-architecture/ , http://forums.ni.com/t5/LabVIEW/Community-Nugget-2009-03-13-An-Event-based-messageing-framework/m-p/... ) and really simple, but not in the "middle range". This forum and other sources of NEITHER are really good, but I want to swim in a huge "info-ocean", without guidance...

  I'm after course 1 Core and Core 2, do you know that some free educational material that is based on these? (to say something 'intermediary'...)

  Thank you very much!

  I would use queues instead of a FGV in this particular case.

  A driving force that would provide a signal saying that the data is ready, you can change your FGV readme...  And maybe have an array of clusters to hold values more waiting to be read, etc...  Things get complicated...

  A queue however will do nicely.  You may have an understanding of producer/consumer.  You will need to do maybe not this 3rd loop.  If install you a state machine, which has (among other States): wait for the data (that is where the queue is read), writing to a file, disk PID.

  Your state of inactivity would be the "waiting for data".

  The PID is dependent on the data?  Otherwise it must operate its own, and Yes, you may have a loop for it.  Should run at a different rate from the loop reading data, you may have a different queue or other means for transmitting data to this loop.

  Another tip would be to define the State of PID as the default state and check for new data at regular intervals, thus reducing to 2 loops (producer / consumer).  The new data would be shared on the wires using a shift register.

  There are many tricks.  However, I would not recommend using a basic FGV as your solution.  An Action Engine, would be okay if it includes a mechanism to flag what data has been read (ie index, etc) or once the data has been read, it is deleted from the AE. 
  
  
  There are many ways to implement a solution, you just have to pick the right one that will avoid loosing data.
  

• Read data from the text column in report

  I have a sql report with an editable column created using apex_item.text (5);
  
  I tried to read and insert the data from the column in a table, using this process
  
  because me in 1.apex_application.g_f05.count
  loop
  insert into table (col_a, col_b)
  values (apex_application.g_f05 (i), apex_application.g_f04 (i));
  commit;
  end loop;
  end;
  
  but without success.
  
  The message when I execute is ORA-01403: no data found.
  
  What is the error?

  HI lkefur,

  Try to debug it.

  The reason behind this is that your report do not have the of4, fo5 (one) as text fields at all.

  try to delete value n f04 normal text and check, even to f05.
  I think that most probably the reason whether shud.

  You can view only the source of the page and check which names are your text fields of the report to help.

  Kind regards
  Nandini thakur.

• Read data from the file into ArrayList

  Hello
  I have a class called product describing the charactristics of products such as the name, id, price etc.. I have the whole set and use the get methods in my class of product. I store the information on my products in an ArrayList. I can write the information on my products in a file.
  so far, but so good...
  
  I want now to re-read the data from the file and store it in my list of tables again. I know I can use Parsing and read in data in an ArrayList as String, int, double etc. but is anyway to read in from 'Product' (then it would be up to my class of product)?
  
  Thank you in advance.

  1. are you aware of serialization?
  2. get a name, I love not dealing with numbers.

  DB

• reading data from a variable, separated by "|" and insert into the table

  Hi experts,
  
  I have a file on FTP and I read the file. Now what I have to do is to separate the data and insert them into a table. I have already created the table with the required fields.
  
  How can I get data from str?
  
  code below
  
  declare
  File1 UTL_FILE. TYPE_DE_FICHIER;
  VARCHAR2 (1000) filename: = "GTECHFILES";
  Long str;
  Start
  File1: = UTL_FILE. FOPEN (filename, 'agent_dump_csv.rep', 'r', 32767);
  loop
  UTL_FILE. GET_LINE (File1, str);
  -dbms_output.put_line (' value is :'|| to_char (STR));
  end loop;
  UTL_FILE. FCLOSE (file1);
  exception
  When no_data_found then
  dbms_output.put_line ("END OF FILE");
  UTL_FILE. FCLOSE (file1);
  while others then
  UTL_FILE. FCLOSE (file1);
  dbms_output.put_line (' ERROR: ' |) SQLCODE |': ' | SQLERRM);
  end;

  You must use ' \ [^ |] +' like regexp:

  SQL> create table mytab (a varchar2(20), b varchar2(20), c varchar2(20));
  
  Tabella creata.
  
  SQL> declare
    2  str varchar2(100):= 'qwureer|iftsdfsuif|123134';
    3  begin
    4    insert into mytab
    5      values (regexp_substr(str,'[^|]+',1,1),
    6              regexp_substr(str,'[^|]+',1,2),
    7              regexp_substr(str,'[^|]+',1,3));
    8  end;
    9  /
  
  Procedura PL/SQL completata correttamente.
  
  SQL> select * from mytab;
  
  A                    B                    C
  -------------------- -------------------- --------------------
  qwureer              iftsdfsuif           123134
  

  Max
  [My Italian blog Oracle | http://oracleitalia.wordpress.com/2010/01/17/supporto-di-xml-schema-in-oracle-xmldb/]

• HP Pavilion X 2: HP Pavilion XP cannot read data from USB DVDs

  We bought a HP 10-ND200ND (HP pavilion X 2) in the Mediamarkt and tried to install Microsoft Office from a DVD via a DVD USB Samsung player.  This was not possible. According to Support Mediamarkt this product is a Tablet and so cannot read data DVD´s. Only General to play music. To buy a laptop computer for this application. The operating system is Windows 10 (32 bit). Is that correct. Please advice.

  Hi Banhien, the cause is known. I have seen other comments on the HP forum and concluded that the reader needs more power than is available through the USB connector of. I added a hub that can provide power to its connectors USB, HP X 2, by car and the problem has been resolved! It was noted that the mini USB is also more powerful and with the type of adapter USB USB C it might also work, but I did not test this, because I do not have such an adapter. It's odd that such a mini can provide more power. It is surprising that the HP Pavilion X 2 does not have a powerful USB. But the problem is solved. Thanks for your response! Best regards, wiely