Reading data with the USB-6216 CAN?

Similar Questions

• BlackBerry smartphones can not synchronize with the USB cable plugged into charge pod

  Hello

  I read on the web site of shopblackberry.com, in the details of charge pod ( http://www.shopblackberry.com/_blackberryaccessories/cgi-bin/pd.cgi?frompage=category&page=product_d... ) that the pod can handset with charger travel or data cable for charge and/or sync with a BlackBerry smartphone. So, my question is related on a problem or a misunderstanding of me to this description.

  I want to know if we could recharge and synchronize the BlackBerry via USB cable or is only responsible for the BlackBerry when connected that way. My second question is, is it possible to synchronize the BlackBerry with the USB cable plugged into the pod or not?

  Because I got a request from one of my users about the fact that his BlackBerry 9000 can not synchronize when it is on his group.

  Thank you very much!

  Hello

  It's a loading dock. It is useful, because just drag you your "BOLD" in there and it will load (just like the 8300 Curve).
  If you want to synchronize, you can plug a usb on the side of the appliance cord. This can be done while the machine is in its dock, where the description.

  I have the same crib, but for the 8300. It's really worth buying. I'm happy with it every day.

• IBM Thinkpad message: 'this machine can run faster with the USB 2.0 hub.

  Original title: Thinkpad USB 2.0 Hub.

  Hello:

  I have an IBM Thinkpad T-21 which is under Ubuntu & Windows xp.  I primarily use Windows XP.  The pop-up that keeps occurring is "this machine can run faster with the USB 2.0 hub.  Can you tell me how to upgrade my USB 2.0 Hub?  Would like to know because I can't sync my Android phone with my computer until I do it. Thank you.

  Are you sure you copied this error message properly?  In other words, he says that the hub could perform better if connected to a USB 2.0 port?  As far as I can determine that the T21 is not come with a USB 2.0 port, even if you connect a USB 2.0 device (for example a hub), the unit will only race as fast as the port allows it.

  What is the brand and model of your terminal?

  It is possible that the message means the opposite (i.e., your computer has a USB 2.0 port, but the hub is only a USB 1.1 device).

  USB 2.0 was introduced in 2001, so if you bought your computer before 2001, it is likely that you use USB 1.1 or 1.0.

  Open the Device Manager (start > run > devmgmt.msc > OK)
  Expand the category of 'USB Bus controllers'.
  If you see the "Enhanced" work for one or more of the listed devices, you have a USB 2.0 port.  If you do not see "Enhanced", you have USB 1.1.

  

  If the problem is that the USB port on the computer is not 2.0, so your only solution is to buy a USB 2.0 PC Card adapter.  Example and example 2
  If the problem is that the hub is not 2.0, then you will need to buy a new hub.

• I got a mini iPad 2 32 GB as a gift to replace a dead laptop but I'm not at all familiar with the product. Can I create and save word documents a presentations on a flashdrive off iPad mini?

  I got a mini iPad 2 32 GB as a gift to replace a dead laptop but I'm not at all familiar with the product. Can I create and save word documents a presentations on a flashdrive off iPad mini?

  You can create word documents and powerpoint presentations, but you cannot save them directly on a normal USB.

  Microsoft made a version of office for iPad, you can find it in the App Store. Here is a link:

  Word

  https://iTunes.Apple.com/en/app/Microsoft-Word/id586447913?Mt=8

  PowerPoint

  https://iTunes.Apple.com/us/app/Microsoft-PowerPoint/id586449534?Mt=8

  There are usb drives that work with iPads, and you can save documents to those who use their own applications.

  http://9to5Mac.com/2015/03/20/the-best-iPhoneiPad-USB-flash-drives-with-Lightnin g-connectors.

  Also I suggest you read through the iPad User Guide:

  http://help.Apple.com/iPad/9/

• play sounds temporary and file of your choice when reading data with VISA functions?

  Hello.

  I read the function of reading data with VISA and then I use as multiple functions to display data on the graph. everything is OK.

  now, I want to play a sound specified (like a song in my desired folder 3s) signal which cross above the specified value range. then after the desired time, it will wait still new cross above the specified value and this repetition of the procedure until I stop the program.

  Data MCU is from and it does not stop when his game system and what system of incoming data for this part (his play) will ignore them pending that outdated.

  I use this for reading data and part VI mentioned which belongs to her is empty and I don't know what I have to do?

  altougth I use an another while loop for his apartment because I want to save time CPU.

  Thank you.

  

  I recommend you do the data type of the notifier a cluster that contains a path and a numeric (double).  The path indicates the reader what file to play.  Digital is the duration.

  Now in a way a bit complicated, but really good stop your second loop.  Do not use a second notification.  Instead, send the normal notification but not use a path for the path in the cluster.  Your second loop can write a check for the path of a not and stops when that is received.

• Foreign key constraint, not recognized during the synchronization of data with the model dictionary

  Hello

  Data Modeler is a foreign key constraints do not recognize when synchronizing data with the model dictionary, although the foreign key is there (in the database that a data dictionary is read). I can't find any criterion when a foreign key is not recognized by the Data Modeler. Are there limits to the length of the attribute, or the number of columns in a foreign key, or other limitations which may lead to this behavior not to recognize a fk by Data Modeler? I have columns more than 32 characters. I compared with the fk is recognized by DM, but I can't find anything that indicates why it is not recognized.

  I wonder if someone also has constraints of foreign keys that are not recognized in the comparison of data bases and model?

  Thank you

  Robert

  Hi Robert,.

  Thanks for the comments, I logged a bug.

  Philippe

• "Unknown device" USB Barcode scanner, problem with the USB controller driver?

  Hello

  I need assistance with our Barcode Scanners that doesn't work on our newly purchased computers at HP with Windows7 Pro x 64 operating systems.

  The brand and model of the bar code scanner is:

  Datalogic Heron D130 USB.

  When you connect the scanner to a USB port, Windows will try to install this as a HID, but it takes an unusually long time, about 7-8 seconds, to boot the device and install the drivers and appears as an unknown device in windows "devices and printers" and the hand scanner does not work.

  Sometimes when you move the USB back can I sometimes the scanner at hand to be recognized as an HID device or a Datalogic barcode scanner,

  It works fine until you restart the computer.

  After restart the computer cannot detect the scanner Barcode correctly without re - appears as unknown device.

  I suspect that there is a compatibility problem between barcode scanner and card USB controller on the computers.

  I tried to update all the drivers available on the website www.hp.com and same www.Intel.com (chipset drivers) but nothing has helped to solve this problem

  Tried newly bought barcode scanners and "used" barcode scanners earlier who works on other computers, but the problem remains.

  I found a workaround by connection of bar codes in a USB hub, and then plug the USB hub to the computer.  And leave the USB - hub to take care of the communication with the Barcode Scanner.

  in this case, it takes about 2 seconds for the code scanner barcode to mount correctly in windows under the heading "devices and printers" and then works perfectly, even after a reboot.

  I googled after a response after my problem, but it seems I'm the only one who experience this issue. ?!

  Bought more than 40 computers that I have this problem.

  These were bought at different times with two different for suppliers

  Computer model are the following

  HP ProDesk 1 400 P/N5S21EA

  Specifikations:

  http://WWW8.HP.com/emea_africa/en/products/desktops/product-detail.html?OID=6614160#! tab = specifications

  Does anyone have an idea what could be wrong and how to fix it?

  Thanks in advance

  Sincerely

  Robert T

  Hello

  The problem is not power - related.

  We use passive USB hubs that solves the problemon these computers.

  (it also works with the docks, or if you EliteDisplay E241 HP as we thers a usb hub 2 ports inbulit in monitor that works.)

  The problem lies in the incompatibility between the Intel USB controller and the hand scanner, can be connected to USB 3.0

  When you let another usb-controller support in handshakeing (such as a usb hub), it works.

  Datalogic or Intel would like to acknowledge this error.

  Because none of the big companies want to acknowledge the problem or repair, personally chose to switch to an AMD platform / CPU instead of the Intel and now it works fine!

  We get more performance for your money when AMD is usually less expensive to purchase.

  And because of the poor of Datalogic press where they don't even answer e-mail (their only channel for support)

  I chose to stop using their products. I'm going to use another provider / brand of barcodescanners.

• Reading data with NOR-5772

  I'm reading the data with the NOR-5772.  I tried the example code(NI_5772-Getting_Started_(Host).vi), and it will read noise (with nothing plugged into channels).   However when I try to send a signal (such as that generated with a NEITHER-DAQ card on the same system and routed to AI0/AI1), the signal does not change a lot of the noise.   I have the drivers updated and am under LabView 2012 (32-bit and 64-bit, I get the same result)

  Everyone has to experience this problem?   Thank you.

  Yes, the device is AC coupled and has a high pass filter.  There is a diagram of frequency response on page 20 of the user manual:

  http://www.NI.com/PDF/manuals/373625a.PDF

  It seems that the cuttoff frequency is about 100 kHz.

• all my data is all save on the local disk c, how to share the data with the other drive, local drive d.

  all my data records on the local disk c, how to share the data with the other drive, local drive d.

  Hi Jasonbichard,

  1. what type of drive is D? Is - this another partition on the same disk?

  2 Windows operating system you are using?

  You can change the location of the disk to save the data in the d: instead of C: and check if it helps.

  a. navigate to the location (username) C:\Users\.
  b. right click on the folder that you want to change the location, and then select Properties.
  c. click on the location tab and change the location to D: drive.

  d. click on apply and Ok.

• why I'm unable to copy data to the USB in windows 7

  why I'm unable to copy data to the USB in windows 7

  Hello

  You don't say how you try to do.

  You can right click on the data you want to copy to the USB > hover the mouse on send in the list > in the Sub Menu that appears choose the USB by clicking left on it and the data must be copied to it.

  It is also to select the data you want to copy > press Ctrl + C > click in pen drive > press Ctrl + V

  Another method is to drag and drop the data from one drive to another.

  See you soon.

• e9280t cannot start with the USB 3.0 card (tried several providers) new version of BIOS e9280t necessary

  Hello...

  I bought a new e9280t year last on the HP site complete with 9 GB of memory (now 16), Blu-ray/DVD writer & reader, tuner TV digital Hauppauge, ATI Radeon 4850 video card bi-ecrans, etc... Since then, I've added more memory and a Firewire 400/800 3 card. His running Win 7 Pro (sp1) and the BIOS is v5.29.

  I bought an external drive to USB 3.0 WD (3 TB) and a StarTech USB 3.0 card (Amazon.com). After installing a USB 3.0 card, the system would be powered on for a second then die and then do it again a few seconds later and the cycle continues until the power cord was pulled. Then, I pulled the USB 2.0 card and tried again only to have the same results. The only cards that remained in the system during the trial was the ATI card and the TV Hauppuage card.

  Thinking that the problem was with the USB 3.0 card, I bought another provider (Rocketfish of BestBuy) and installed. The same problem as with the other card USB 3.0, the system does not start.

  No software driver or other changes have been made to the system before installation tent (according to the vendor's installation instructions).

  Given that all failures occur during the power first sequence and cards have been tried with and without power tied to them, that the problem cannot be fixed with an upgrade of the BIOS for the motherboard of TRUCKEE. I could be wrong, but I'm going on 30 years of experience of material as my framework for this review.

  If anyone else has this same problem, it would be good to rally them around and see if HP notice us.

  Thank you

  Norm

  I upgraded my power supply 650w (thermal take) and it all works - USB 3 controller (Koutech Dual Channel SuperSpeed USB 3.0 PCI Express Card (2 x internal) model IO-PEU232) - he also has a SATA power connector, but it works very well with just a power bus.
  -also updates card reader (put it in the 2nd DVD Bay): internal Koutech IO-RCM630 Multi-in-1 USB 3.0 SuperSpeed Front Panel card reader with a USB 3.0 Port (3.5 ")

• Dynamic action for validation of date with the notification message plugin

  Hi all

  Someone help me please with dynamic action for validation of date with the message notification plugin. I have a form with two elements of the date picker control and message notification plugin.

  The requirement first user selects the exam is finished and then selects the date. So, if the date is greater than the date of the examination is over + 2 years then doesn't trigger the message notification plugin. I tried to create that dynamic action on the date picker date that triggers the scheduled issue notification message but I want to make conditional, I mean displays the message only if date of the selected is greater than the date of the exam is finished more than 2 years.

  In terms simple, notification is displayed only if provided is superior to (date of the exam is completed + 2 years).

  I use oracle apex 4.0 version and oracle 10g r2 database. I tried to reproduce the same requirement in my personal workspace. Here are the details. Please take a look.

  Workspace: raghu_workspace

  username: orton607

  password: orton607

  APP # 72193

  PG # 1

  Any help is appreciated.

  Thanks in advance.

  Orton.

  You can get the value of the date of entry:

  $(ele) .datePicker ('getDate');

  So what to add functions such as:

  function validateNotification (d1, d2) {}

  Date1 var = $(d1) .datepicker ('getDate');

  date2 var = $(d2) .datepicker ('getDate');

  if(date1 && date2) {}

  return ((date2.getTime()-date1.getTime())/(1000*24*60*60))>(365*2);

  } else {}

  Returns false;

  }

  }

  The logic based on setting (I have two years from years of 365 days preceding)

  Then in the D.A. specify a JavaScript expression as:

  validateNotification ('P2_REVIEW_COMPLETED', this.triggeringElement.id)

  Refer to page 2 for example.

• I have Adobe Reader XI with the package that allows me to send a PDF file and convert PDF files to Word. When I open a pdf file and you try to find the search shows no match, even if the word I'm looking for is in the document. Suggestions how to search?

  I have Adobe Reader XI with the package that allows me to send a PDF file and convert PDF files to Word. When I open a pdf file and you try to find the search shows no match, even if the word I'm looking for is in the document. Suggestions how to search?

  A scanned document is an image; You can't find a picture.

  If the image contains text, recognition of characters (OCR) will convert the 'text' in the image in real text (searchable, editable).

  OCR can be performed automatically when converting a PDF to Word, using the ExportPDF service.

  To run OCR inline in a PDF document, you will need Acrobat.

• I have problems to make my battery charged, because the cable does not have a link solid with the socket of the phone.  The problem seems compatible with a lot of cables, so I think the problem is with the phone. Can it be fixed?

  I have problems to make my battery charged, because the cable does not have a link solid with the socket of the phone.  The problem seems compatible with a lot of cables, so I think the problem is with the phone. Can it be fixed?

  Probably there is debris and dust in the decision-making of the lightning.  Serve with compressed gas canned (NEVER orally).  If this doesn't help, try electronic contact cleaner has a q - Tip.  Finally, take it to Apple.

• Since 10.11 I have not been able to download via the usb port of my Davis Vantage weather station. No solution of tech Davis on the issue even with the new recorder of events in the resort. Is there a problem with the usb?

  Since 10.11 I have not been able to download via the usb port of my Davis Vantage weather station. No solution of tech Davis on the issue even with the new recorder of events in the resort. Is there a problem with the usb?

  What Mac? (details)