Reading frames inconsistent stuttering / deleted

Similar Questions

• Reading frames of 10 sensors simultaneously

  Hello

  I developed a code that reads CAN data frame the port box (PCI-CAN / 2 series 2). The Board of Directors has 2 ports CAN. I have connected a sensor to one of the ports and reading frames using my code. I want to use the same code to read frames of 1o sensors simultaneously. Can someone help me? I tried to create UNDER VI of my code, but it reads only one port at a time.

  Thanks in advance

  Mark VI as re-entering, and you should be able to call it in parallel (VI properties-> performance-> clone pre-allocated re-entrant execution).

  Remember, if you do this, you will need to use multiple files (as multiple threads can not write to the same file handle).

• Error running VDR: Trouble reading files, error-3942 (delete Snapshot failed)

  Hello

  I currently have a problem with my VDR backups. as indicated in the title, the error I get is "error running VDR: Trouble reading files, error-3942 (delete Snapshot failed)".

  Background

  We are currently running VMware Vsphere version 4.0.0 on VDR version 1.1.0.707. We have a task of backup running in Vsphere that takes a snapshot of every night of the VM. It is then wrapped on tape for the archive.

  Question

  All of the virtual machine is backup successfully except one. I get the error message is as above: "error running VDR: Trouble reading files, error-3942 (delete Snapshot failed)".

  The backup task completed successfully, and the virtual machine can be restored from a backup. However, the virtual machine always has a snapshot and in addition, the virtual disk to the virtual machine is still attached to the host.

  The current will of this issue that we use is:

  (1) stop the VDR Server

  (2) remove the attached hard disk

  (3) to take a snapshot of the virtual machine

  (4) delete all snapshots.

  I would like to find a solution to the underlying cause, as the current will is tedious and time consuming.

  Another note, the logic unit number that the virtual machine is currently has a block size of 2 MB while all other virtual machines have a block size of 1 MB...

  If you need any additional info, feel free to ask.

  See you soon,.

  http://www.VMware.com/support/VDR/doc/vdr_120_releasenotes.html#upgrade

• XAVC 4 K reading dropped frames and stuttering

  Hello

  We have several computers running different configurations which has problems reading 4 K XAVC - I the FS7 camera.

  While reading real itself is quite fine, and the CPU usage revolves around 25% even with applied classification, the start and stop of playback induced by the LAG, dropped frames, stuttering and 1-2 second hangs. CPU usage spikes to 100% during these events.

  I had the problem on an i7 3930 K, 64 GB ram, ATI R9 290 x and well thought out, maybe it's a bad Windows Installer and weak chip, so I upgraded to the current specifications:

  I7 5930 K OC'd to 4, 05ghz

  64 GB DDR4 2600 mhz

  NVIDIA GTX 980 Ti at stock speed

  Windows 10 100% new installation without other programs other than Adobe and fresh drivers installed on the web.

  RAID 0 with 4 x WD Black drives 4 TB of external PCI-E RAID controller.

  Operating system installed on the SSD #1

  Programs installed on SSD #2

  Latest CC from Adobe installed

  Last installed CC body

  This computer cut 4K like butter, but it hangs and lags when you press SPACEBAR or mouse clicking play to start.

  What could be the problem?

  Hi Romsdalsfilm,

  The problem also existed before the last update, which happened a few days ago.

  We had a similar bug that close in 2015 CC we couldn't reproduce it. It looks like he may have made their reappearance. If you have time and have not already done so, Please fill out a bug.

  Thank you

  Kevin

• XNET Executive session: read frame vintage - not able to read i / c frames

  Hello

  I created Veristand Custom Device for RT PXI monitor Xnet CAN of my Test frameworks to the UUT. I use CAN map 8513. I have a problem that I could see images from to WEAR it, but not able to see the (outgoing) frames, I send to USE.

  But since my host PC (windows pxi) I used the monitor Bus Xnet - in remote mode - to monitor CAN interface in this RT PXI, when bus Xnet monitor device custom above also starts showing outgoing executives. Please help me with this.

  In the custom device - create Xnet session using '.vi XNET Create Session (frame Input Stream)' and 'reading XNET (Raw image) .vi"to read CAN traffic.

  A slightly modified version of 'https://github.com/NIVeriStandAdd-Ons/XNET-CAN-Bus-Monitor-Custom-Device' to see frames the two inbound/outbound.

  With the help of VeriStand 2014

  The people on our Board of Directors VeriStand may be able to help a little more with making a custom device.

  http://forums.NI.com/T5/NI-VeriStand/BD-p/440

  You don't know how it would work in VeriStand, but ownership XNET Echo pass? is probably what you want to use.

• XNET read frame CAN

  Hello

  I use Veristand 2011 and I worte a device custom for the reading of the electronic can over reading XNET CAN frame

  now my problem is, who is unable to retrieve the CAN-Messages.

  I could install my custom device CAN-Frame, but there is no information can.

  On the other hand, I've defined a XNET Session on exploring system with CAN1. That would be the problem?

  Or maybe my RT pilot?

  Help, please.

  Kind regards

  YesB

  Hello

  your device does not work correctly. and I can see frames. I made the following changes:

  

  It is possible that you have seen the error image. But you have several frames on the Bus. This means that you must write all the frames in the RT FIFO. I would recommend to use XNET Read RAW Frame. It is an array of U8 you can better manage that work with groups and so on.

  Kind regards

  Philippe

• Junk 'Unread' becomes 'read' in the folder deleted

  After that I have unread spam 'remove', some (but not all) appear as "read" in the deleted folder. Please can someone explain why this is happening?

  Hello El_84,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

   

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• during the RAM Preview and reading frame counters

  I understand that I should be able to display the number
  of the Treaty currently framework during a RAM Preview
  in both the meter of timeline (in frame display mode) and in the info panel.
  This does not work for me, and I'd like to see if I'm missing something.

  This is the State of the counters with a current RAM Preview.
  The only images update count is at the bottom of the composition window,
  and it could not be visible during the processing of a RAM full screen preview.

  RAM PREVIEW CURRENT

  

  This is the status of the counters during the RAM Preview playback.
  Playback CTI is roughly 90 of 912 frame, but the counters at the same time the
  Chronology and the compose window are frozen at zero, while the Info Panel
  is frozen in the last number of the frame in the scenario (the last rendered image).

  
  

  READING OF THE CURRENT RAM

  

  During the reading of the space bar, only the counter the composition window displays
  the current frame.  The meter of the timeline is frozen in the frame number where
  the CTI was stationed during playback started (in this case, frame 0).
  The info panel displays only the playback framerate.

  READING OF THE STANDARD PREVIEW

  

  If I stop playing RAM Preview or standard using the space bar
  the meter of timeline updates to the frame of the CTI, but if playback resumes
  the frozen counter stays where ICT was parked at the resumption of play.
  I feel this behavior using frames, timecode, ft + frames and using
  "To present" the RAM previews.

  Please tell me I'm doing something wrong.

  > I can't seem to get a current account in the timeline will appear a rendering or reading circumstance

  This does not happen.

• Windows mail - once messages have been read they are completely deleted instead of going to the deleted messages folder

  Windows mail.

  All of a sudden my messages are completely deleted instead of going to the deleted messages folder.

  Unread messages are still ongoing in the deleted folder.

  All ideas, this has only happened recently

  While in the Inbox: view | Current view. Make sure Show all Messages is checked and nothing else. Bruce Hagen ~ MS - MVP [Mail]

• Reading of stuttering in Premiere Pro 2015 XAVC

  Hello

  I'm going to XAVC OK - I 4K stutter in first pro. As it is not really suitable for editing.

  My characteristics of the machine are i7 3930 K, 64 GB ram, ATI R9 290 X, 4 x WD Black 4 TB in RAID 5, NEC 4 K monitor.

  ProRes 4 K plays perfectly, like a hot knife through butter.

  CPU usage spikes immediately to 100% during playback 4 K XAVC. 1080 p WHAT XAVC brand revolves around 20%.

  Hi hazarding movies,

  Looks like you got a double post here: XAVC 4 K reading dropped frames and stuttering

  I'll close this one.

  Thank you

  Kevin

• How can I expand the frame of reading on my computor

  original title: how DO I EXPAND THE READING FRAME ON MY COMPUTOR

  I can't read my email - reading image is too small

  Hello

  • E-mail are what customer you referring?
  • This only happens on the Email?
  If you use a Webmail, you can check this link:
  http://Windows.Microsoft.com/en-us/Windows7/zoom-in-on-a-webpage
   
  Reply back with more information.
  See also:
  http://support.Microsoft.com/kb/555375

• Windows Mail has just started my mail read the deletion if I go into Inbox to any other box in Windows mail. I need a fix!

  Don't know why, but my read mail is automatically deleted if I go into inbox sent, deleted or any other box in Windows Mail. Can anyone help me please with the steps on how to change this back?

  Nevermind, I searched again and found my answer!

  Do not worry. It is not deleted. While in the Inbox: view the current view. You want to uncheck: Hide the Read Messages and show all Messages must be the only option checked. Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• I need to leave emails on the original email server and still be able to read e-mail using Thunderbird

  When I read e-mails and delete them Thunderbird deletes the e-mail messages from the original server. Another user also reads emails, so I need to leave them on the origin server so she could be able to read also.

  You use the POP or IMAP protocol?
  Sounds like the last, and which is normal with IMAP.

• Do not delete the Inbox of messages. The folders deleted trash and still does not

  When I click on Delete on the messages that they do not remove it, they look just like they were read sometimes. I deleted the trash folders as they say on the Help menu, but that did not help. This happens not all the time but is very annoying. I have to restart thunderbird and then delete them and sometimes only 3 or 4 will delete until I have reboot again.

  Try to rebuild the troubled folder index file.
  Right click on the file - properties - file Repair

• Slow to mark read messages.

  I just moved the files from one PC to another. Reinstalled Thunderbird on the new machine. Account POP3, I've used for years. Have had problems of slowness in the past on the old machine, followed by some antivirus, etc. Old machine behaved properly recently. The machines are slightly different hardware, but both are Windows 7.

  I keep a large Inbox (easy search); about 7000 messages.

  On the new machine, marking a message read or unread or deleting a message, freezes Thunderbird for about 25 seconds. Move from an already-read the message to another has no time limit. Only when moving out of a message which has got only marked as read, or to mark a message read, causes the delay.

  I tried to move half of my messages to another folder and compacted in the Inbox; Frost goes to 11-12 seconds (proportional to the size of the Inbox). But I don't want to leave it like that or keep the Inbox so small.

  I compared the behavior in other folders (I check in from 2013 and before files in different folders): archive folders have the same proportional delay. More large files may cause a delay of 40-50 seconds. Small folding machines have almost no delay.

  These things made no difference:

  -Thunderbird safe mode, no difference.

  -Disabled antivirus; no difference.

  -Enabled indexing (indexing of the file Windows, intelligent indexing of Thunderbird); no difference.

  -Database global rebuilt; no difference.

  -Enabled "Use Thunderbird in offline mode": no difference.

  -Verified Inbox gets rewritten instantly when I click on a message to read or click to mark unread. the gel comes after that.

  This, however, eliminated the delay:

  -Restart Windows in safe mode with network. Thunderbird responded immediately, as it did on the old computer. Delay has disappeared.

  Restart the computer in normal mode, returns the delay.

  I found my problem - and thank you to all who responded.

  It's my fault - I said this isn't the antivirus, and it's because I had turned off all * internet * monitoring and it has not affected.

  Explain to a friend in person, I realized that I had not tried to turn off real-time * file * surveillance.

  That was the problem. McAfee's scan the Inbox for the virus attachment file every time that the file was rewritten (whenever a message has been marked read or unread).

  Obvious as soon as I thought about it. Thank you, everyone. Problem is solved.