Reading Message parameters in the application of the ADF

Similar Questions

• reading viewScope variable in the method of the ViewImpl class

  Hello
  
  Suppose I want to get viewScope.deptno in my function that is declared in the class ViewImpl
  
  ' Public Sub proc (String deptno, String amount) {}
  setp_deptno (deptno == null? ('%': deptno);
  this.setNamedWhereClauseParam ("p_deptno", deptno);
  this.executeQuery ();
  System.out.println("viewScope.DEPTNO="...?);
  }
  
  How to get to it in my service?

  do you mean placing the logics from VOImpl to client interface class?
  

  Yes, then you can see the method exposed in the control of data under the node ViewObject. Then, you can run the method in your method of beans as below

      public String executeMyVOMethod {
          BindingContainer bindings = getBindings();
          OperationBinding operationBinding = bindings.getOperationBinding("proc");
          operationBinding.getParamsMap().put("deptno", PassAnyDeptNo);//you can get it from view scop variable
          operationBinding.getParamsMap().put("amount", passAnyAmmountvalue);  //you can get it from view scop variable
          Object result = operationBinding.execute();
          if (!operationBinding.getErrors().isEmpty()) {
              return null;
          }
          return null;
      }
  

  could you clarify why this is a bad practice to store the logic in VOImpl?
  is it because I can't refer to ViewScope of there?
  >

  access a range of memory variable in your model layer (if its there) is a bad practice, because you're breaking MVC model. This is not the best approach, even if you can do it.

  >
  (this approach is based on video tutorial of Shay "Passing parameters to the ADF through the URL of the Application")
  >
  It's different, it's not your use case

• Smartphones blackBerry Email - shoot Office Outlook read messages on my phone

  I don't know much about the operation of the e-mail servers and the subtleties behind e-mail, so I find it very difficult to deduct my answer to previous messages.

  I can't seem to solve this problem and it has troubled me for a long time now.

  I have a blackberry curve 8310 and a microsoft exchange e-mail account. When I get an email, it goes to my outlook Inbox and my phone which is normal. I read it and it shows as read. Fine. Everything is good.

  But when I look at an email read more later on, no matter what age the enamel is, it transmits to my phone again. And once again. And once again. Whenever I simply click on the email to open it, it sends to my phone as if it were a new email.

  Also when I was not in the office for a long time I had to access my email via the web. When I can finally go back to outlook, I get a load (bad word) of new messages on my phone. This is of course all read messages of all the days I was away from the office, I ALREADY RECEIVED.

  Any advice on where to go with this will be appreciated.

  Thank you

  BIS is Blackberry Internet Service

  This is how you integrate e-mail through your operator accounts

  need to connect to your carriers BIS site (if you don't know, in my opinion the best way to find it is... to search google for "carriername" BIS)

  example: verizon BIS

  first link will be your carriers BIS of the site, click top and you connect.

  Here you will see your email address, you want to delete

  then follow the instructions in the article to reinstate it below

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB03133&sliceId=SAL_Pub...

  before you do anything however, make sure you checked on the size of your Inbox in outlook

• I uninstalled the old version of Adobe Reader and tried to download the most recent version; However, I get a message indicating that the new version is already installed.  Adobe is not listed as an Application on my computer.

  I was unable to update Adobe Reader in my computer; then I uninstalled the program.  When I tried to download the latest version of Adobe, I received a message stating that the most recent version of Adobe is already installed on my computer. I don't see Adobe on the list of applications on my computer, any suggestions on what to do? Thank you...

  Hi annac88455204,

  Could you please tell me which OS is running on your system?

  You must remove all traces of the previous versions of reader in order to download a new.

  On windows platform, you can try running the cleaning from the indicated link tool:Download Adobe Reader and Acrobat cleaning tool - Adobe Labs.

  Restart the computer and then try to download the new version from the links provided: https://get.adobe.com/reader/enterprise/

  Please let us know if this solves your problem.

  Concerning

  Sarojini

• "Adobe Acrobat Reader DC cannot open 'amy application' because it's a non supported file type or because the file is damaged."   I received this message during indexing on my computer.  I could not get the message, so I uninstalled Adob

  "Adobe Acrobat Reader DC cannot open 'amy application' because it's a non supported file type or because the file is damaged."

  I received this message during indexing on my computer.  I could not get the message, so I

  uninstalled Adobe.

  After you have uninstalled Abobe, I was able to get all my jobs and applications (with the exception of adobe files).

  Then I tried to re - install Adobe, but who has turned to a complicated procedure.

  There are so many choices, and there are a number of downloadable updates. What was I guess what to do?   But I have chosen one of the Adobes and tried to install it.

  After that I don't know what happened.  All my desktop icons are now Adobe icons in place.   that is The Firefox icon is now replaced by an icon of Adobe.  It is the same for several other desktop program icons. (QuickTime, chrome, Internet Explorer, etc.)

  When I try to open the program by clicking on it, I get the above message.

  I went to the site of help from Adobe and read a complex string of instructions, including

  words like '% pdf', "DWROD" and, for me, other nonsensical words and phrases.

  Needless to say that the instructions were no help.

  I said all that to say this.  I want that my computer back.  What should I do to do?

  Sincerely,

  Ralph Thompson

  [personal information... [Mod - https://forums.adobe.com/docs/DOC-3731]

  [This is an open forum, not the Adobe support, please do not post personal information]

  [If you send messages by e-mail, please turn off your "sig file" function for display]

  This may help: Application, file icons change in Acrobat/Reader icon

• Try to download Adobe Reader, but the message "Unable to load Application configuration."

  Try to download Adobe Reader, but the message "cannot load configuration of the application.  What can I do to get Adobe Reader?

  Download the installer from http://get.adobe.com/reader/enterprise/

  If you would like more information, please indicate your operating system.

• Need urgent help! In my Vision Application, how to extract the parameters of the geometric model specified curve was generated by the template editor OR?

  I have an application of machine vision, in which the geometric pattern match technique was used to find the target in the images of type variant.

  as we know, we do a geometric model by model OR editor in the editor we can adjust the parameters of the curve specified settings to get the desired curves and we derive the custom box to ignore during the match. then we save the use of the same model in our application of vision.

  Now my question is coming. When I program my request for the geometric game. I have specified the parameters of the curve for the entrance of the IMAQ Advanced Setup learn ringtone 2, of course, I have to adjust this identical to the model, but I don't know how we extract the geometric model. I tried all the methods, for example, I can read data custom, IMAQ get characteristics of the geometric model(it's just for the basic functionality? so is there even a VI based edge?), even at anasys PNG file formats! But I can't read the info of the geometric model by myself!

  It is also illogical to adjust the CURVE SETTINGS manually again for the " IMAQ Advanced Setup Learn Pattern 2" after that I already have in the template editor OR!

  Hello

  Why do you need to specify the curve settings once again, if you have already built a model using the template editor? You don't need to use "IMAQ Advanced Setup learn geometric model 2 VI" to find games (see the attached example).

  You can wire the 'curve settings' control to 'IMAQ configuration geometrical game model 2 VI', but the values are not used if wire you a Boolean true to the node "use learning curve settings" (it's like that by default). To prove it, I enclose a small program with pre-created model (using the template editor) for a geometrical alignment. The model and the test of three images are also included.

  Try changing the settings of the curve with the 'use know curve settings' enabled, and you will see the corresponding score remains the same. Disable the Boolean control, then try to change the curve settings.

  Also take a look at the detailed help for "IMAQ configuration geometrical game model 2 VI", specifically the "learning curve parameters of use."

  I hope this helps.

  Best regards

  K

• Each time after clicking the icon of user account on windows xp to change a password is crashes with this error message: Microsoft (R) HTML Application host has encountered a problem and needs to close.

  Each time after clicking the icon of user account on windows xp to change a password is crashes with this error message: Microsoft (R) HTML Application host has encountered a problem and needs to close.

  There is a Microsoft Knowledge base article which sets up a few steps to perform in the computer in order to solve the problem you are experiencing, read the article that you find on the link I am mentioning below and see if it helps the measures mentioned:

  http://support.Microsoft.com/kb/919751

• Whenever I try to move/scanning/reading messages in WLM I get the error msg 'we cannot connect to WLM now. "

  For about a month now (may be related to the installation of the Service Pack?), whenever I try to move/scanning/reading messages. in Windows Live mail, I get the same error message "we cannot connect to Windows Live Mail right now. Please try again later. You may not be connected to the Internet. "But I'm certainly online, it shows up on the taskbar.  Can someone please?

  Hello

  The question you have posted will be well suited in Windows Live Mail Solution Center. I suggest you to send your application in Windows Live Mail Center Solution for better support

  http://windowslivehelp.com/product.aspx?ProductID=15

• To run all the applications of the laptop or install download applications works does not error message indicating that the application is not valid "win32.exe or win32.application.

  To run all the applications of the laptop or install download applications works does not error message indicating that the application is not valid "win32.exe or win32.application.

  Hello m.velentino,

  Not sure if you are still having the error message isn't valid win32.applicaiton.

  Get the error: not a valid 32-bit application can have several origins:
  I have listed some of them below.

  The file is corrupted, bad or missing.
  -If the hard disk is damaged or hurt it cause work programs to fail, either because not all data can be read from the hard drive the program is damaged on the drive. Run scandisk and defrag on the hard disk to check for potential errors.
  -If you run the program from a shortcut on the computer, verify that the program is still on the computer. In some cases if the program is no longer installed on the computer, you can get this error.

  File is not designed for your version of Windows:
  -If you try to run a program that is not designed for your version of Windows, you can get this error.
  -Although many old programs designed to work in older versions of Windows will work with new versions of Windows, unfortunately, not all programs will not work.
  -If the program is an MS-DOS program more former start program or Windows, you can get this error.
  -If the program is designed for a 64-bit version of Windows and you are running in a 32-bit version of Windows, it will not work and generate this error.

  File is a virus, worm or other malicious program file.
  - This error can be generated by a file that is a virus, worm, Trojan horse or other type of malware file. Often, this will result because the antivirus installed on the computer will not allow the file to install or run. Try to analyze the file to check, it is not a virus or infected.
  -If the file has been checked and is clean, it is always possible that the virus protection program or a another program installed on the computer is at the origin of questions during installation or execution of the program. Start the computer in Mode safe and try to run the program. start the computer in Mode safe will be that nothing is running in the background that could cause this problem.
  
  Hardware incompatibility.
  -If you get this error during the installation of a program, it is also possible that the CD-ROM drive or the drive that you are installing the program from is not compatible with Windows or has drivers that are not compatible with Windows.
  -Download the latest drivers for your CD player or other of the manufacturer of the computer or the manufacturer of the equipment. (Microsoft does not pilot for other materials)

  Let us know if these suggestions help you.

  Marilyn

• Active Services Web Directory has encountered an error when reading the parameters for the specified Active Directory Lightweight Directory Services instance

  VCenter Server 4.1, I installed it on a physical machine. This is the error message that appears whenever I try to follow what is happening every 1 min event viewer.

  Error:

  role for users: log name: Active Directory Web Services

  Source: ADWS

  Date: 2010-07-28 15:55:21

  Event ID: 1209

  Task category: Instance ADWS events

  Level: WARNING

  Keywords: Classic

  User: n/a

  Computer: wwubmw.williamwoods.local

  Description:

  Services Web Active Directory encountered an error when reading the parameters for the specified Active Directory Lightweight Directory Services instance.  Services Web Active Directory will try again this operation regularly.  At the same time, this body will be ignored.

  Instance name: ADAM_VMwareVCMSDS

  The event XML:

  The OS is Windows 2008 R2. What should I do to solve the problem.

  Thanks for the reference Troy

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

  Gregg Robertson, VCP3, 4, MCSE, MCSA, MCTS, MCITP

• What runtime error of Reader 9 to redirect the Application data is fixed?

  Has anyone heard when Adobe will fix the error Runtime of Reader 9 to redirect the Application data?  It still occurs with 9.1.3 only users who have their Application Data redirected folder via Group Policy.

  It lasts for a while, as evidenced by the following link and my own personal pain, fight against this

  http://forums.Adobe.com/thread/391738?start=100 & tstart = 0

  I also installed Adobe Reader 9.2.0 via Active Directory and I can confirm the runtime error message still appears, and the application closes. However, the suggested workaround solution worked. After you have set the folder list / permission to read the data on the shared folder of HOUSES on the server (only applied to the folder itself) Adobe Reader has started working.

• I created another account but now to read the emails from one account I need to select read messages rather than go straight to my Inbox on each account why?

  I just added a different e-mail account, but to receive my emails that I have to click on my e-mail address high in "BOLD", in the left sidebar in thunderbird and then click on the button "read messages" so I can receive e-mails in my Inbox. It is with my default email account and my new account, I've set up an hour ago.
  Thank you

  You may have the default display settings.

  Turn on the "Folders pane" can help you navigate better. I got used to the look of 'style Outlook' at some point.

  To do this:
  Select ' VIEW > layout > pane of folders "in the menu bar. If the police you always visible menu bar, you can activate it by pressing 'Alt + v' keys, then select ' layout > Folders pane.

  I like the standard view + have the message pane (F8 is the shortcut for this one).

  I hope this helps.

• How to navigate to open the message to the Inbox to show all unread and read messages?

  Need for Thunderbird:
  Scenario: My Inbox is overflowing with unread and read messages. I like it at least for a while.
  I select and read a new message. I do not delete it. Then, I want to return to the full total Inbox to read and unread with a smart key messages. Part of use / available now? Right now I use... high slider to the screen and work through all the headings of e mail anyway until I return to the title that reads "Inbox." Slow and frustrating. Any solution please? Thank you

  It is Ctrl + Ctrl + 9 1 moves to the last tab on the right

• Can't see the read messages in my Inbox even if the filter is not turned on.

  I can only see unread in my Inbox e-mail messages even if the living part of the filter IS NOT set to unread. When I read an unread message, it is then no, but when I close Thunderbird and go back, only unread messages appear and the message read disappears. This isn't a problem in one different folder other than the Inbox.

  Try the button AppMenu - View - Messages - all