Reading of the worksheet causes error 7

Similar Questions

• reading of the worksheet into an array of strings

  Hello

  I need help to build an array of 1 d (string) from a MS Excel file. I tried to use spreaaadsheet reading / read the file of the measurement. I am unable to do this. The excel file contains alpha-numeric data. Please suggest with a few example screws.

  entry would be the path of excel file

  output would be a table 1 d of channels

  Thank you

  Is it necessary to be an Excel file or you use Excel to open the file? If there must be Excel, then you may need to use her Active X (for example you can find in this forum), otherwise just save it as a csv file and use the worksheet vi reading with ',' as the separator.

• reading of the worksheet does not all columns

  Dear users and moderator.

  I'm trying out a text delimited by tabs of the data file. I would like to transfer the data in a table 2D with VI 'Read the worksheet file', but it seems that only the first column is acquired.

  I checked and the delimiter is fine. I also tried to change the format, but without effect.

  Does anyone have an idea about the problem?

  Thank you very much and good luck.

  Andrea

  You must put the tab delimiter character correctly. Right-click on the delimiter string constant code and select display.  It will show \\t.  Remove one of the backslashes. Otherwise, simply replace it with the character of tab delimiter string.

  

• reading of the worksheet try to open two files

  I want to open multiple files and combine them. I tried to make a loop with a variable number of iterations depending on how many files, I intend on the combination. In the loop for example, I placed a reading of spreadsheet. When I run the vi with highest point running on, it works perfectly - exactly how I intended. When I run without, his version of spreadsheet always try to open a file more than the number I said and then crashes. I can't understand what is happening because it works fine when I am debugging.

  Thanks for your help!

  Sorry if it's a little messy - as imstuck said this vi is something that I slapped together quickly to manipulate data. I did the loop go once with a constant try to eliminate the sources of error.

  I fixed it just now. I had the file I tried to load open in excel and closing excel solved the problem. I don't know if this is a common problem with labview (it happens at all when I have the files to open with Notepad).  In case someone else has this problem, close the excel document fixed it completely.

• Multiple can write to screw the worksheet cause a change to rewrite?

  In my program I use now two parallel loops, which have both a writing on spreadsheet VI written to the same file path.  I did not really care order lines are added to the worksheet, as data from two different loops can be differentiated, but what I was asking, is that it is possible for the two live run simultaneously and have one change to crush the other, so there is a line missing in the final result.  I have seen that it is a risk for writing in local variables in parallel loops, but have not seen anything be it specifically to write to an external file.

  Thanks for your help.

  Writing on a spreadsheet file is not reentrant, while an instance of the latter can run at a time.  As long as you are concatinating, I don't expect any loss of data.

  However, a better solution would be to have another loop to process your file IO.  Then you can open it and keep it open.  You send data may be written using a queue.  And do not forget to close the output file.

• Attach the card reader to USB chip causes error

  I recently installedVNware Workstation 6.5.3 build 185404 on a Windows Vista SP2 system. At emigrant an old Windows XP vm and it loades fine. My problem is when I try to connect to the XP virtual machine. It is configured so that you can connect with a card chip. I click on VM/Removable Devices/Virtual SCM MicroSystems Inc. SCRx31 USB drive 0/Connect, and the following error window appears:

  Fatal error VMware Workstation: (vmx)

  Exception 0xc0000005 (access violation) occurred.

  A log file is available in "C:\Users\irishjd\My virtual Machines\zirishjd-d2\vmware.log".  A core file is available in "C:\Users\irishjd\My virtual Machines\zirishjd-d2\vmware-vmx-3280.dmp".  Please request support and include the contents of the log file and the base file.

  To collect the data to submit to the VMware support, select help & gt; Topic and click 'collect data for support. You can also run the script 'vm-support' in the folder my computer directly.

  We will respond on the basis of your entitlement to support.

  After answering this error, the host OS (Vista) tells me that VMware Workstation VMX has stopped working, and I have to close it completely. Does anyone have an idea of what could be the cause and how can I solve this problem?

  TIA,

  Jon

  The USB team has reviewed your accident and found the cause.  The problem has been diagnosed and fixed earlier, so 7 Workstation should not have the problem.

  In addition, we have marked correct it to be put in the next patch stand-alone version to version 6.5, so I hope that the next update available for you should also fix your problem.

• Why the transition from the server causes error?

  I reported the error to the it Department, they respond as indicated below:

  "These errors are the result of a transition from server we are currently experiencing. As soon as the server transition is complete errors should stop. »

  «The transition of the server error has to do with displacement of the IP4 to IP6.» All pages work technically, but if you happen be routed through IP6 instead of the IP4, some of our pages will not appear due to firewall issues. »

  Does anyone have suggestions on what causes the error of IP4 to IP6?

  Thanks in advance for your suggestions

  -----------------------------------------------------------------------------------------------------------------

  Detailed description on the report of mail as shown below:

  Referring to the following link, some images cannot be display on 29 October.

  http://I1093.Photobucket.com/albums/i438/junk000/Error2.jpg 
   
   
  The other day, when I try to click on the following link and open it using IE8, the response is slow and getting the error on
  "Web Page error: 502 Bad Gateway!" with frontispiece USGS URL resolution error
  Please see the link for more information.

  http://I1093.Photobucket.com/albums/i438/junk000/error-6.jpg

  Do server not able to response to the loading of the web?  Is there anything to improve his performance on the server?

  Support is located in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Successful compilation of the package causing errors

  Hello
  
  We just compiled a plan of production during break time so there are no users on the system, since then they get an error in the Application Express by which they want a package that then calls a function within this package which has been recompiled. This error does not occur every time they try and record a record, but maybe 50% of the time. The system is used by about 500 users on 4 sites.
  
  The error is
  
  ORA-04065: not executed, altered or deleted ORA-04065: not run, altered, or removed the stored procedure 'OWNER. DATE_TIME_PKG' ORA-06508: PL/SQL: called program unit is not found: 'OWNER. DATE_TIME_PKG ".
  
  We run 11g RAC Cluster.

  Hello

  When changing a database object do you need to recompile all it's dependancies?
  

  I always recompile (if they become invalid) objects that depend on the object I have change and not the base objects (IE my evolution package depends on).

  Concerning
  Anurag Tibrewal.

• Common problem with Windows 7, what causes errors with itunes, the software adobe reader, TurboTax 12

  Is there a common problem with Windows 7, what causes errors with itunes, the software adobe reader, TurboTax 12?  I get error messages when I try to use one of these programs

  Hello

  Thanks for the reply with the details.
   
  Problem with opening PDF documents, please see the link and follow the steps in the article:
   
  Error "Windows cannot access the specified device, path or file" when you try to install, update or launch a program or file
  http://support.Microsoft.com/kb/2669244#top
  Important: Disable your antivirus or changed settings can make your PC vulnerable to viral, fraudulent, or malicious attacks. Microsoft does not recommend that you disable your antivirus software or change settings. If you need to temporarily disable your anti-virus software, you should reactivate as soon as you are finished.
   
  See the link for the question with idevices:
   
  iTunes for Windows: "Could not load the data class" or "Cannot load provider data" alert synchronization services
  http://support.Apple.com/kb/TS2690
   
  Problem with TurboTax 12, check out the links and follow the steps:
  http://TurboTax.Intuit.com/support/IQ/install-product/reinstalling-the--NET-Framework/GEN12673.html
   
  5639 error: Cannot configure the product update system
  http://TurboTax.Intuit.com/support/IQ/update-product/error-5639--can-t-configure-product-update-system/SLN12386.html
   
  http://TurboTax.Intuit.com/support/IQ/install-product/Troubleshoot-installing-and-running-TurboTax--Windows-/SLN63018.html
   
  If the troubleshooting steps above do not help, check in a new user account:
  Reference:
  http://Windows.Microsoft.com/en-in/Windows7/create-a-user-account
   
  If it works in the new user account, then the current may be corrupt user account.
  To fix the damaged user account, follow the steps in the following article:
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
   
  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• You try to run the scan mode and mode interface fpga at the same time is causing errors

  I'm reading a 9236 9237 and a 9215 with the scanning engine and read from two 9211 modules with the fpga. It's because I need to acquire to 200 Hz with the 9236 9237 9215 but maximum rate of the scan engine is limited by the slower module in the system, which in this case is the max of 15 hz the 9211.

  So to use both interfaces (scan engine and fpga), I followed the percisely given in this article for instructions.

  1. the project has created and added the peripheral crio using the interface of the scan engine.

  2. Add the target fpga and drag and drop the 9211 inside modules

  3. has created the fpga in interface file with and compiled with no error.

  4. interfaced with the file fpga at almost exactly the way the sample project of "getting started with 9211' by using the engine of analysis in the interface with the other modules.

  5. after the errors to discover that I created a VI that tests for just the portion 9211 code (called "thermocouple FPGA method Test.vi")

  The data returned by the interface fpga was nothing else than zeros on all channels, even if thermocouples were hooked on some of them. (all zeros as entries in the convert temperature vi gives-410, 6160 degrees F, if you happen to have the material to try this.)

  I get the following error from the open fpga vi reference:

  code error-61141
  "Thermocouple method Test.vi FPGA.
  Activities FPGA:
  
  Open FPGA interface reference.
  Reserved outside LabVIEW FPGA:  turns The RIO Scan Interface.  You must set the mode Interface FPGA chassis in order to unlock the FPGA. »
  

  It's extremely frustrating, because as I explained, I've been very attentive not only follow the instructions for concurrent fpga and analysis but also to model my VI by the example of VI, even if only for the moment, just to try to work things out.

  Any help would be appreciated as I need to fix this for the further development and I am somehow in a lack of time. I opened a support ticket (reference #7256226), but the app engineer had no time to answer.

  My system:

  cRIO-9014 controller RT with crio-9104 bottom of basket.

  LabVIEW 2009

  Latest drivers and peripheral software pc and rio (RIO scan 3.2 engine support june2009)

  rex1030 wrote:

  I'm reading a 9236 9237 and a 9215 with the scanning engine and read from two 9211 modules with the fpga. It's because I need to acquire to 200 Hz with the 9236 9237 9215 but maximum rate of the scan engine is limited by the slower module in the system, which in this case is the max of 15 hz the 9211.

  This should not be the case.  9211 data will not update with each sweep, but you should be able to run the scan faster than 15 Hz without problem.  Do you have specific issues with this?

  So to use both interfaces (scan engine and fpga), I followed the percisely given in this article for instructions.

  1. the project has created and added the peripheral crio using the interface of the scan engine.

  2. Add the target fpga and drag and drop the 9211 inside modules

  3. has created the fpga in interface file with and compiled with no error.

  4. interfaced with the file fpga at almost exactly the way the sample project of "getting started with 9211' by using the engine of analysis in the interface with the other modules.

  5. after the errors to discover that I created a VI that tests for just the portion 9211 code (called "thermocouple FPGA method Test.vi")

  You can try making sure that the chassis is set to mode Interface FPGA and the setting is deployed.  I wrote that article that you referenced says will select the deploy option later and not explicitly speak to deploy the chassis later.  Run a VI with a reference open FPGA vi not automatically deploy chassis settings if you need to do it explicitly.  Try the following steps.

  1. right click on the frame element and select Properties.  Make sure that the Interface FPGA option button is selected. \

  2. right click on the frame element and select deploy.

  3. repeat your VI.

  The data returned by the interface fpga was nothing else than zeros on all channels, even if thermocouples were hooked on some of them. (all zeros as entries in the convert temperature vi gives-410, 6160 degrees F, if you happen to have the material to try this.)

  I get the following error from the open fpga vi reference:

  code error-61141

  
  "Thermocouple method Test.vi FPGA.
  Activities FPGA:

  Open FPGA interface reference.
  Reserved for LabVIEW FPGA outside: The RIO Scan Interface is running. You must set the mode Interface FPGA chassis in order to unlock the FPGA. »

  The likely cause of this error is that the setting of the FPGA Interface on the chassis has not been deployed.  If the chassis is still Mode Scan fixed personality bitfile will be loaded on startup and the FPGA will be locked.

  It's extremely frustrating, because as I explained, I've been very attentive not only follow the instructions for concurrent fpga and analysis but also to model my VI by the example of VI, even if only for the moment, just to try to work things out.

  I'm sorry that you have had difficulties.  Assuming that I'm wrong about the source of your problem, it seems we have to update less than Ko to include the deployment step.

  Any help would be appreciated as I need to fix this for the further development and I am somehow in a lack of time. I opened a support ticket (reference #7256226), but the app engineer had no time to answer.

  My system:

  cRIO-9014 controller RT with crio-9104 bottom of basket.

  LabVIEW 2009

  Latest drivers and peripheral software pc and rio (RIO scan 3.2 engine support june2009)

• Problem reading the worksheet after you use a DLL to write on the worksheet

  Hello

  I have a few problems reading a sheet DLL created in LabVIEW. The DLL is written in C++.

  I'll dexcribe what do the VI in the screenshots:

  For DLL_INIT = the first false steps the VI (LabVIEW) values and exports in a DLL initialization.
  DLL takes these values and not some und calculation, then wrote the measured values and the new calculated values in a csv file called 'filtered_values' and a file 'filtered_values_complete '.
  so, I have two files like this after initialization:

  1.0000000000; 1.0000000000; 18.8991610737; -3.2940000000; 0.0060000000; 0.9000000000; 6.5806287097; -3.2940000000; 1.0000000000; 0.0000000000; 1.0000000000; 0.0000000000;

  So now on DLL_INIT = true.
  For the calculation, the next step i read the "filtered_values" - file (LabVIEW), calculate the new values and write in filtered_values (DLL)
  And in the "filtered_values_complete" - file I will allways read the DLL entry first, so that I can check later, if the DLL has obtained the values to the right of the front step and then add the calculated values.

  For i > 0 initialization has been made:
  -the VI bed sheet "filtered_values" calculation and rotted the table 1 d in its unique values
  -The last seven values in the worksheet have been exported in the dll as well as five new measured values.
  -This DLL is still a few calculation
  - then it replaces the "filtered_values" - file and adds a new line to the 'filtered_values_complete '.

  This migth be a bit of confusion, so a small example, afer five steps it loooks like this:

  filtered_values:
  5.0625000000; 1.0000000000; 18.9300200447; -3.2870000000; 9.7320000000; 0.8997597592; 5.9159054233; -2.6533532901; 1.0000000400; 0.0000000000; 0.8078703403; 0.0000000000;

  filtered_values_complete:
  1.0000000000; 1.0000000000; 18.8991610737; -3.2940000000; 0.0060000000; 0.9000000000; 6.5806287097; -3.2940000000; 1.0000000000; 0.0000000000; 1.0000000000; 0.0000000000;
   
  2.0625000000; 1.0000000000; 18.8330081064; -3.2940000000; 9.7270000000; 0.9000000000; 6.5806287097; -3.2940000000; 1.0000000000; 0.0000000000; 1.0000000000; 0.0000000000;
  2.0625000000; 1.0000000000; 18.8330081064; -3.2940000000; 9.7270000000; 0.8999399568; 6.4077416273; -3.1451829134; 1.0000000100; 0.0000000000; 0.9480589053; 0.0000000000;
   
  3.0625000000; 1.0000000000; 18.7932988441; -3.2870000000; 9.7280000000; 0.8999399568; 6.4077416273; -3.1451829134; 1.0000000100; 0.0000000000; 0.9480589053; 0.0000000000;
  3.0625000000; 1.0000000000; 18.7932988441; -3.2870000000; 9.7280000000; 0.8998799074; 6.2394046705; -2.9768465052; 1.0000000200; 0.0000000000; 0.8988158138; 0.0000000000;
   
  4.0625000000; 1.0000000000; 19.0445703499; -3.2870000000; 9.7320000000; 0.8998799074; 6.2394046705; -2.9768465052; 1.0000000200; 0.0000000000; 0.8988158138; 0.0000000000;
  4.0625000000; 1.0000000000; 19.0445703499; -3.2870000000; 9.7320000000; 0.8998198333; 6.0754981785; -2.8129479844; 1.0000000300; 0.0000000000; 0.8521305805; 0.0000000000;

  5.0625000000; 1.0000000000; 18.9300200447; -3.2870000000; 9.7320000000; 0.8998198333; 6.0754981785; -2.8129479844; 1.0000000300; 0.0000000000; 0.8521305805; 0.0000000000;
  5.0625000000; 1.0000000000; 18.9300200447; -3.2870000000; 9.7320000000; 0.8997597592; 5.9159054233; -2.6533532901; 1.0000000400; 0.0000000000; 0.8078703403; 0.0000000000;

  So it's good enough that the VI and it works fine until some point when the just VI reads more calculation and x = sheet! There? becomes true.

  Most of the time it happens when the csv file is about 1200 lines

  Someone knows why this happens?

  Best regards

  Stefan

  Hello

  understood, that the error occurs somewhere completely else. the thread may be closed

  BR

  Stefan

• The gatherer is unable to read the registry 0 error code 800700002 x. What does that mean?

  The gatherer is unable to read the registry 0 error code 800700002 x. What does that mean?  Slow performance are now a big problem.  Natural remedies do not work

  Hello

  I suggest you perform a clean boot in order to check whether a third-party program is causing the problem.

  See this article for more information on the clean boot:

  
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353  

• How can I stop the blue screen error caused by sffp_sd.sys

  Since the middle of the latest version of windows aprils has updated that I regularly get the blue screen... The last was 26/05/12 16:30...

  DRIVER_IRQL_NOT_LESS_OR_EQUAL

  STOP: 0X000000D1 (0X00000002, 0X00000000, 0X00000008, 0X914E8774)

  BTHUSB Device bthport.sys - 914E8774 address, base at 914E5000, Datestamp 4db03738

  Hello

  BTHUSB Device bthport.sys and sffp_sd.sys are the two components of Windows that means something else led him into
  Fault. First thing I would do is update the BlueTooth drivers. Check with the system manufacturer (mother's support-
  the Board Maker for systems (custom), their documentation online and drivers and ask in their forums (if any)
  known issues and/or / the real peripheral manufacturer support site. (See driver update methods in the next
  message.)

  ===============================================================================

  Pick up the pieces after a computer crash
  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive download collected files and after shot/screenshot.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  ==================================================================

  BCCode: D1 0x000000D1

  Think video drivers especially if it may be others. Refer to the section of driver in my credits
  methods of troubleshooting blue screen below. BIOS, chipset of low level drivers and
  antispyway/antivirus/security programs can also cause this. Check the resolution of the problems and
  When you arrive at the driver and tests of memory sections do reference to generic methods in following
  message and then back to the if necessary troubleshooting tool.

  BCCode: D1 0x000000D1

  Cause

  A driver tried to access a pageable (or that is completely invalid) address while the IRQL was too high.

  This bug check is usually caused by drivers who used a wrong address.

  If the first parameter has the same value as the fourth parameter, and the third parameter indicates a runtime operation, this bug check was probably caused by a driver who was trying to run code when the code itself has been paginated outside. The possible causes for the error page are:

  • The function was marked as pageable and was operating at an IRQL higher (including obtaining a lock).
  • The function call was made to a function in another pilot, and that this driver has been unloaded.
  • The function was called by using a function pointer that was an invalid pointer.

  
  BCCode: d1 0x000000d1<-- read="" this="">
  * 1210.html? order = votes http://www.faultwire.com/solutions-fatal_error/Driver-IRQL-not-less-or-Equal-0x000000D1-

  =========================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Error: "error btstackserver.exe: 0x0054be37 error, 0x000001ef memory could not be read" before the shutdown.

  Original title: Btstackserver causing error computer turns off.

  It began on 15 September after downloading a video game and starts when you try to run the game, but has since broke outside to play the game, even after I uninstalled it.

  The error message that appears before the judgment reads: "" btstackserver.exe error: 0x0054be37 error 0x000001ef memory could not be read. ""
  My laptop close instantly and is unable to start for a few minutes at least. Once a blue screen occurred on startup asking to allow the troubleshooting begin, that I authorized. There is however, no solution found by the computer. I tried several solutions, including running a system defrag and cleanup and uninstall the game. As part of my laptop gets unusually hot at shutdown, I also inspected the area and cleaned the dust of him in an attempt to eliminate possible physical obstructions.
  My laptop is an Asus N61jq age of two years and I run Windows 7 x 64.
  Any help is greatly appreciated.

  After you perform a clean boot several times, I determined the problem with the Steam client set. I also seek to their site of support for similar problems and followed through the steps of support described in this page: https://support.steampowered.com/kb_article.php?ref=1274-UOHK-5653

  For now, this seems to have fixed the problem, but I'll post here if the problem persists.
  Thank you very much for the help!

• Find and read the worksheet file target of target folder

  I'm trying to find and read the worksheet file target in the target folder. Help, please. Thank you.

  

  Build Path VI will solve the problem.