Reading on the 3rd monitor problems

Similar Questions

• How to stop more calories of reading on the activity monitor?

  How to stop the calories to be overvalued in the activity monitor?

  Hi Roger

  To help improve the accuracy of estimates of the calories:

  • Check that your personal information is accurate:
    • On your iPhone, in the application of the watch, go to: My Watch (tab) > health > check and, if necessary, change your date of birth, sex, height and weight.
  • Check your privacy settings:
    • On your iPhone, in the application of the watch, go to: My Watch (tab) > privacy > Motion & Fitness > check that heart rate and fitness tracking are both enabled.
  • Calibrate your Apple Watch:
    • Calibration will improve the accuracy of health and activity related to such estimates:
      • Estimates of calories for a workout during the use of the application of the workout.
      • Calories, distance, move and perform estimates in the implementation of the activity.

  More information:

  Calibrate your Apple Watch for better accuracy of training and activity - Apple Support

  Use the activity on your Apple Watch - Apple Support

  Use of the workout on your Apple Watch - Apple Support

• No reading on the second monitor suddenly (on several computers here)

  Hey guys,.

  Yesterday, several of our computer were suddenly not able to display playback on their second monitors...

  It's very strange because nothing has changed. Everything is configured correctly, with the monitor turned on and displaying the desktop.

  Any help would be greatly appreciated... for now, I resorted to the display of the program on the second monitor.

  

  Hi Sdfhsdthjsdtj,

  Everything that happened at the same time? See this post and see if it helps you: Re: Premiere Pro CS6 Mac - Second monitor stopped working

  Thank you

  Kevin

• driver for the w2558hc monitor problem

  I looked at previous posts and cannot find answers to the problem I have.

  I have a new HP Touchsmart Tx2 laptop, running Vista Home Premium 64 with memory 4gm. I just bought a HP w2558hc monitor. Attached to the Tx2 via DVI and USB provided. Oiginally installed ok with drivers and the recognition of the monitor.

  Updon last updates from HP and MS it won't recognize the monitor. I reloaded the drivers but the Tx2 will not find drivers w2558hc so he sees it as a generic monitor. When pilot reloading I "Access denied" sometimes but not other times.

  I spent hours on the phone with HP support yesterday. We me finally to run the DRVFix tool - which I did. I reloaded the drivers w2558hc OK, but the Device Manager and HP My Display still will not recognize the monitor - only as a generic monitor.

  Would appreciate any help / advice / tips! Really frustrated with the support of HP because they can't fix it. Thank you.

  Thank you very much for your answer. I tried the UAC road without success. In fact, I tried the driver specific monitor HP to take advantage of the many features included with it. I solved the problem and the solution follows.

  My solution:

  Got a copy of a document from HP called: HP w2558hc LCD Monitor driver. Follow the directions for my Vista Home Premium 64 environment and goes to the manual (INF and ICM) section driver installation... then the section Microsoft Vista Home and business editions. Followed the instructions step by step and low and here is it worked.

  It was after hours on the phone with two different HP support groups. Sure am glad I got softtware HP work CORRECTLY with the HP hardware!

  Once more, appreciate your help and your advice.

• Communication with the external monitor problem

  When watching a video or tv content on the internet via our hdmi tv, after some time, the screen goes black, a few moments later, the sound turns off, then the laptop restarts. This does not happen if I look at the content that has been downloaded to the laptop then played through the TV. The error message that appears in Event Viewer is the following:-

  Log name: System Source: Microsoft-Windows-DistributedCOM Date: 16/09/2016-16:53:11 event ID: 10016 task category: no level: error keywords: Classic user: computer ACER_LAPTOP\Hilary: Acer_laptop Description: the machine default permission settings do not grant approval to activate local for the COM with CLSID {C2F03A33-21F5-47FA-B4BB-156362A2F239} server application and the APPID {316CDED5-E4AE-4B15-9113-7055D84DCC97} the user Acer_laptop\Hilary (S-1-5-21-862588424-839220286-1550613147-1001) SID address LocalHost (using LRPC) running in the container of the application Microsoft.Windows.Cortana_1.6.1.52_neutral_neutral_cw5n1h2txyewy SID (S-1-15-2-1861897761-1695161497-2927542615-642690995-327840285-2659745135-2630312742). This security permission can be modified using the Component Services administrative tool. The event XML: 10016 0 2 0 0 0 x 8080000000000000 22079 system Acer_laptop machine-default local Activation {C2F03A33-21F5-47FA-B4BB-156362A2F239} {316CDED5-E4AE-4B15-9113-7055D84DCC97} Acer_laptop Hilary S-1-5-21-862588424-839220286-1550613147-1001 LocalHost (using LRPC) Microsoft.Windows.Cortana_1.6.1.52_neutral_neutral_cw5n1h2txyewy S-1-15-2-1861897761-1695161497-2927542615-642690995-327840285-2659745135-2630312742

  Can someone tell me what is the cause and how can I solve this problem? Thank you.

  Thought I would let you know that, by chance, I came to find the fix on the Microsoft Community website.

  The issue might be related to display drivers and try again the steps to uninstall graphics cardin Device Manager, uninstall the drivers of device from the list of programs, and then download the latest drivers from the manufacturer's website.

  Step 1:

  Uninstall the device from Device Manager

  • Open the Device Manager
  • Expand the section of the graphics card .
  • Find the Display card Driver.
  • Graphics Driver right click and choose Uninstall.
  • Select the check box delete the driver for this device.
  • Restart the computer after the uninstall is complete.

   

  Step 2:

  Uninstall the drivers of device from the list of programs in the control panel

  • Click Start, select Control Panel
  • Now, click on programs and select programs and features.
  • Find the Display card Driver.
  • Display driver card click right and select Uninstall.
  • Restart the computer after the uninstall is complete.

  I tried and it seems to have worked so far. Fingers crossed!

  Thanks for your advice. Maybe this will add to the knowledge base for future issues.

  H

• First reading 6 CS on the 2nd monitor...

  Hi people,

  Just uninstall 5.5 and now I see that none of the sequence parameters have reading on the second monitor option. In fact the read setting

  the button is grayed. Even if I try to create a custom ff.

  With the help of Mac 10.6.8

  First CS 6

  I have installed card Redrocket

  and also BMD Declink Studio 2

  Any ideas?

  Koray Birand

  www.kroaybirand.co.UK

  Hi, amel.

  We have changed which you access 2nd head and other features in CS6.

  Try the following steps:

  1. in the file menu choose Premiere Pro > Preferences > playback settings

  You should see your monitors listed under video devices.

  I hope this helps!

  Peter Garaway

  First Pro EQ

• Running a 3rd monitor Radeon 5870

  Afternoon, I am running 2 cinema Display 30 ' on my PowerMac. I upgraded to a Radeon 5870 as it can run 3 monitors... I bought another monitor, plugged into the HDMI connector & 2 only one race at a time? I read online that you need an active HDMI cable to run the 3rd monitor so I tried one and still no results...

  I won't update my operating system, as it is the last system that works for my music production implementation.

  My 3rd monitor is as follows: br1-25um57-p http://www.ebuyer.com/724861-exdisplay-25um57-p-2560-x-1080-ips-21-9-ultrawide-e? gclid = Cj0KEQjwrZ24BRC098fr-OqnuMkBEiQAKQ9lgG6bAQ0jhBCvEsVCNf7PQRUrZ yFLk42D_-xuL1I8f2QaAk_78P8HAQ #fo_c = 951 & fo_k s = ecd6809444dd8e08df43ac5130fcd159 & fo_ = gplauk? mkwid = sWA3N2WiH_dc & pcrid = 51630194939 & pkw = & pmt =

  If the link does not work its:

  • 2560 x 1080 Full HD.

  I hope someone can point me in the right direction! Seems a waste of new graphics card and monitor at the moment...

  Any PowerMac cannot operate Mountion Lion. You can check your model of Mac? I think you have a Mac Pro. There are two optical drive doors?

  

  Although almost identical on the outside, their internal architecture is very different with different methods of troubleshooting. If you have a Mac Pro, we can get you settled in this forum.

• Transmit mercury only shows the program, not the source monitor monitor

  Hello people,

  For some time now, I have this problem where only the signal from the program monitor is sent to my external monitor. The source monitor working within first on my computer monitors, but will not playback on my external monitor. It is in each project unique im working on and I find it very difficult to identify the problem. It won't work when I drag a clip from a location to the source monitor or make a match frame of the timeline. I would add also that sometimes, but not everytime, when the program monitor transmits very well and I do a double click on a clip in the tray or drag it to the source monitor, my external monitor goes black. This also happens when you do a correspondence framework. And to add another weird thing, the audio is being transmitted by the source monitor. First pro audio is routed through my external monitor. I can just hear end during playback of clips in the source monitor. It's just the video that will not be displayed on my screen.

  
  

  My hardware is just simple Quicktime mov with ProRes in them in 1920 x 1080 so nothing special.

  I have the latest version of first and my driver for the monitor of Blackmagic Mini is also updated.

  I'm open to suggestions!

  Thank you!

  I think I solved my problem.  After a lot of troubleshooting, we ransacked the Premiere Pro preferences (hold down shift + option while launching the first) and the source has been restored.  Or my preferences were corrupt, or else my system has been set up in the reading panels and Audio hardware preferences.

  Unfortunately, after a few days the reading of the source monitor went out again.  I trashed my preferences again and reading has been restored.  I'm still trying to understand why this has happened.

  To answer your questions.  I am using a monitor.  He has worked with AJA Kona, but we recently went to Blackmagic so that we can use to Resolve.  I do not know if yes or no the Blackmagic was initially working right, but I don't think it was.  I got stuck on a large project, it was a few months before I could make a test or troubleshooting.

  I hope this helps!

• CS5, no Audio output of the Source monitor, but output OK for the program monitor

  Hi all

  Any thoughts on why audio output would be audible during playback in a timeline/program monitor, but the same clip doesn't produce audio output when loading in the source monitor? In the body of CS5.

  I checked the preference settings and everything seems to be fine there.  We have just added a set of external speakers to this workstation and those are the audio devices in the program monitor.  When a clip is read in the Source monitor, speakers produce a nice low hum, but the sound of the clip is missing.  The buzz that crosses leads me to believe the audio hardware is mapped and set correctly, but maybe not?

  Thanks for your thoughts?

  LIndsay

  My apologies for the lack of detail... I know better than that.  Luckily I thought about it the problem.

  The clip is Ikegami MXF.  The problem was that the first audio channel didn't have any audio recorded to it.  I changed the properties audio clip and disabled channel 1. Voila! The clip was loaded in the source monitor and the sound became audible.

  I found the inspiration for the fix in this thread: http://forums.adobe.com/message/4324033#4324033

  Thanks for the research!

  Lindsay

• How can I get windows appears on the second monitor?

  Windows does not detect the second monitor.  Unable to access options to the mirror of the main screen.  Second montor is connected, but is only the display wallpaper.

  Hello

  1. How did the second monitor connected to the computer?

  I suggest you try the steps from the link below and check if it helps.

  Solving the multiple monitor problems: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-multiple-monitor-problems

  Understand multiple monitors: http://windows.microsoft.com/en-US/windows-vista/Understanding-multiple-monitors

  Set up multiple monitors: http://windows.microsoft.com/en-US/windows-vista/Set-up-multiple-monitors

  Hope this information is useful.

• Try to connect the second monitor to LC

  Im trying to run my Optiquest Q7 monitor as a second monitor and try to expand what is on my primary monitor to the Optiquest for the life of me I can't fiugure it out... help please...

  Hello

  ·         What is the brand and model of the computer?

  ·         Do you use the computer laptop or desktop?

  See the article mentioned below and check if that helps

  Understanding multiple monitors

  http://Windows.Microsoft.com/en-us/Windows-Vista/understanding-multiple-monitors

  See also:

  Solving the multiple monitor problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-multiple-monitor-problems

• When I plug the second monitor, both screens go black - I can not change the settings for external monitor

  Help, please!

  Hello

  I suggest you to return the item and check if it helps.

   

  Solving the multiple monitor problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-multiple-monitor-problems

  You can also try lowering the resolution of the screen and check if it works.

  Change the screen resolution

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

  I hope this helps.

• I accidentally disabled the option monitor 2nd in the Configuration screen, how do I re enable it.

  I accidentally disabled the option monitor 2nd in the Configuration screen, how do I re enable it.

  I want to connect to my LCD tv as a monitor.

  Hello

  I suggest you follow the steps on how to enable below or commendable the second monitor and see if it works.

  Set up multiple monitors

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-multiple-monitors

  Change settings display on multiple monitors

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-display-settings-on-multiple-monitors

  Solving the multiple monitor problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-multiple-monitor-problems

  Multiple monitors: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/multiple-monitors-frequently-asked-questions

  Hope that the problem will be solved by the above link.

• Connection problem with the second monitor, macbook pro 2014, OSX El Capitan

  There are a few threads describing problems with two monitors, but I have not found a match.

  I like for the operating system ask login password once the lid is closed, no matter how much time has passed (even for a moment). Also, I work with a dual monitor. However, when my macbook is plugged into the monitor and I close the lid, the macbook don't disconnect but spends just primary monitors. Understand that this could be a feature and not a bug, I tried to unplug the monitor before closing the lid. But the OS seems not to realize that the monitor has been disconnected, and when I close the lid he didn't ask me for my password once that I reopen it. Does it also if I wait a bit (i.e. one minute) after disconnecting the monitor, but not if I wait a while (or 15 minutes), well that I've not enough highlighted how long is necessary so that it starts locking on my closing the lid. He does it with different monitors, so I doubt that it depends on the particular monitor. In both cases, I used the HDMI port.

  This is quite annoying, because I need to be able to disconnect safely in a short period of time, and I was not able to find a workaround on mine. Everyone knows this? Thank you for any help or advice.

  Emilio

  You might have invoked indevrtantly this obscure 'functionality' of MacOS. Read the article and see if you do these things:

  Use your Mac laptop to view closed with an external display - Apple Support

  .

• I would like to read the reliability monitor for the period of October

  I would read the reliability monitor on my laptop for the period of October.
  When I go to him, it shows me the results of the period between 6. in August, when I bought the laptop and 25 August.

  I'm not able to find the results for September and October.
  Where can I change the date of the controlled period?

  Thank you very much for your help!
  Daniel

  Hello

  See this Microsoft page.

  How to use reliability monitor
  http://Windows.Microsoft.com/en-us/Windows7/how-to-use-reliability-monitor

  Here you can find info how to use reliability monitor

  -Open the Panel of control-> system and security-> review your computer state.
  -Click Maintenance-> verification of the solutions to the problems reported-> view reliability history.