Still burned DVD takes a long time to load into the reader
I created a DVD in Encore CS3. The final DVD is approximately 60 minutes and has 4 menus created in Photoshop CS3. I purchased the Dolby converted in first and used this file as PCM format indicated by a friend vs. The DVD works fine but takes a long time to load in one of my DVD players.
A Sony player, it takes between 40 minutes and up to 70 seconds to load and play the first menu. Each time is different.
(This same drive load purchased in-store Hollywood style DVD in about 15 seconds on average)
In another Sony player my DVD on average about 25 seconds
A Panasonic player, it takes about 15 seconds
In a portable player from JVC, it takes about 8 seconds.
That is what it is? This DVD is created for replication in a large number, but I'm afraid the long loading time is a problem and you want to solve this problem before sending it to the wide for replication.
One consideration is that there is no DVD drive certified to play any burned DVD, only those press/replicated. Most do and do as well, with provisions, but some don't.
Now for these provisions. High quality blank media will get a closer all the success, just like using a slower speed of the burn, as the max. These two considerations will get a close, as it is possible.
What brand of blank media are you using? Verbatim and Taiyo Yuden are about as good as it gets.
How fast you burn to? I would look into a speed in the middle of the range permitted by the combo of speed by the media and the burning speed. Slower is better than more fast.
As Stanley, there may be differences with r and + R media and players. There has been much more a problem, but some players still might prefer a vs the other.
Finally, when you say "replicated", do you mean that you send in a DLT to make a House of replication a glassmaster, where the DVD is going to be in a hurry? If Yes, these replicated discs will be like the Hollywood DVD and will be NOT burnt, as was your test drive. The question will be moot with these, as they will be DVD-videos, where your burned DVD is really a DVD - ROM.
Every time that connect us to servers of TS farm, the profile of the user load for a long time and she stays with a message "Please wait for the user profile service" for longer than 5-6 minutes. We work in two areas which is configured as "an endorsement of forest transitive way." The domain (domain A) with TS farms hence connect us a cross forest profile disabled so we cannot load the roaming profile in this area, whereas another domain (domain B) roaming profile user's roaming profile.
Also in the directory the Active directory of the domain B, TS/RDS settings is enabled for the problematic profile.
TS / RDS--> roaming profile path and TS home folder is configured. TS/RDS settings is configured because we use other farms of machines/TS citrix other than the one in which there is problem.
When disable us TS/RDS of the directory settings active directory domain B, then it is extracted to improvement in time. But we're in a situation were we cannot disable TS/RDS settings as we use other Citrix machines also. So we tried configuration GPO in A TS domain as
Which allows to "allow only the local user profile".
Allowing 'profiles itinerant Prevent password propagation to the server.
This allows to "Allow asynchronous user group policy processing when you connect via Terminal Server Services"
But still, there is no improvement in the time taken by the server to connect. What is the adjustment to make in the field of A TS, such that he will not try to charge the roaming of the B domain user profile, even if TS/RDS settings for the user profile are configured?
Forums of evil: you want to Technet forums. It's more domestic consumption...
Version 5 works fine, when I updated to 6.7, and now 8, pages take a long time to load. It's on 2 different computers, one with Vista, Windows 7 other. If I restart Firefox it helps, but the problem comes back. Does not happen with IE or Opera.
The default value of the pref Network.http.Max - connections has been increased from 30 up to 256 in versions of Firefox 6 +.
Try to decrease the value of the pref Network.http.Max - connections 256-30 such as used in versions of Firefox 3.
One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.
Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.
As the title suggests, end of 2013 (10.11.4) System Preferences on my iMac takes a long time to load, even after a fresh reinstall and/or reboot (tried both). It takes about 20 seconds to one minute each time to open (except when I close it and immediately open it once again, as it is always loaded in memory). This problem existed only after the upgrade to El Capitan, and I saw many other people with iMacs with the same problem. I tried to remove cache for before system preferences files, but that did not help at all. I don't have a FileVault if it makes a difference, even if I did before reinstall, but never turned back (persistent question anyway). Any recommendations would be useful. Thank you!
iMac (end 2013)
Intel Core i5 at 2.7 GHz
8 GB 1600 MHz DDR3
1 TB 5400 RPM HARD DRIVE
Intel Pro Iris 1536 MB
I found it is the State of affairs in 10.11 if running a HD spinning. Don't feel alone.
I suspect that it is a function of low priority in the memory compressed algorithm.
Upgrading to an SSD and it will rise to attention.
Device: BlackBerry Z10
Software version: 10.2.1.537
OS version: 10.2.1.1925
Carrier: Beeline (KZ)
Z10 takes a long time to start when the parameters 'SIM card PIN lock' is running
Tried to activate or disable this setting, the result:
On - 5 min 13 sec (on-screen progress bar has reached 100% for ~ 1 minute, then waited for another 4 minutes in this State)
Off - 1 min 17 sec
What is the problem of the time difference?
After installing Measurement Studio 2009, I noticed that it takes a long time (30-60 seconds) to open a Visual Studio project.
I do not have an internet connection on my development computer and suspect he might be waiting on some kind of operation of the network to time out. I had problems with Visual Studio in the past as well and had to work around them by adding entries to my hosts file (to redirect some addresses of Microsoft to the local IP address - this causes network operations to expire immediately).
Just curious if anyone has encountered this kind of slow startup time and found a solution.
I found an article referring to a question similar to MS 8.1. I don't know if the problem has simply not been corrected or why I am still having this problem. Workaround "per computer" listed in the article solved my problem.
My 3rd generation I - pad takes a long time (hours) to load. Is this normal, or should I consider service?
Make an appointment at apple store for a battery check
They can offer an out of warranty repair / replacement
But you have to pay part of the cost.
See you soon
Dear Pascal, recently, by chance, I installed the client service for Netware on my PC. He asked to restart the computer, and after reboot, logon screens became classic. I uninstalled netware by accessing the properties of LAN. I managed to restore logon screens using Microsoft resources available on the net. However, my PC now takes * for long time for the desktop icons and toolbar are displayed. I use Microsoft Windows XP Version 2002 SP3, Intel Core2Duo processor P8600 @2.40 Ghz with 2 GB of RAM on Lenovo Thinkpad R400. I understand that it is after uninstalling the netware client that my office is very very slow. Help me for a faster loading of the desktop computer. Best regards, Reba Shankar
Thanks for choosing Microsoft Community!
You have reached the right forum. Try to solve this problem.
If I understand correctly, you have some performance issues on windows XP computer.
Let us try the following steps:
Method 1: Any installed program must be uninstalled from Add and remove programs. You can just remove shortcuts from other places like LAN properties.
Run the following fix - it to uninstall client services for Netware.
Solve problems with programs that cannot be installed or uninstalled:
Method 2: See the following article:
How to make a computer faster: 6 ways to speed up your PC:
· Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
· The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.
I am using windows 7 on my HP 530 laptop. My friend who installed and activated, but I think that it has installed the cracked version. After installation, it was really perfect. but after a while when I connected to the internet, some updates have been installed, and then when I logged in the windows, he invites me that you are using a pirated version or something like that (I don't know more actually). then I restored to my previous state and then everything was fine. After that I stopped the automatic updates, but these days my startup window is having a few problems. After entering the password, its taking a long time to load the office and its keep on the list "loading, please wait...". »
I'm so sick of that, also, I have to restart my laptop by pressing the power button, and after the reboot, it works fine. But I need someone to answerwhy its taking a long time to load the desktop...?
Also, please give me some advice to solve this problem, keep this idea in mind that my computer is virus free and got a good processor and RAM. I installed my windows in the C drive, and in my C drive only almost 2 GB of space is left (or almost). and there is no program running auto in msconfig, other than gtalk, Skype, etc.
I'll be really grateful if someone please give me the solution.
HP would have provided your preinstalled laptop with win, they would also have provided a way to recover your laptop to the specifications of the factory, either through discs of recovery or a hidden restore partition that you need to access in order to make recovery disks. How do you access a recovery partition is an option of HP, is not dealing with a MS - visit the HP website, specific to your model for more details on how.
If an illegal win7 version has been installed, or you have to buy version of win7 you need, or you need to recover your laptop provided that the factory provided, by doing so, you lose everything on the phone, if you have lost or that you can not do the restore cd and then telephone HP support they would usually provide records for a small fee.
Lately my internet was very slow for example that if I opened a browser for watching youtube videos of my favorite commentators, it takes so long to load, but Monday about 2 days ago, everything has been loading web pages and videos, now it takes forever to load anything on the internet im confused on what the problem is:(s'il vous plaît aider)
· Did you do changes on the computer before the show?
· You use Internet Explorer? If so, what version are you using?
· You get the error message?
· You are able to access other websites other than Google/YouTube Web site successfully?
Follow these methods.
Method 1: Temporarily disable the security software .
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
Method 2: Follow these steps:
Step 1: Start the computer in safe mode with network and check if the problem persists.
Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.
Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.
Method 3: Follow the steps in the article.
We have a serious problem with profiles from view. When we try to implement the component of Persona, the login screen appears and the user connects. After that, however, the screen goes blue (note, NOT the BSOD) and just is. We waited more than 10 minutes without anything from the computer. We can see the folder of the user created, but nothing is filled. After a certain period of time, eventually the profile seems to cross, but until then, the computer is unusable.
We checked the speed for the server, connectivity and what folder permissions were set correctly on the share and the folder itself.
Are there any ideas as to why the profiles would take so long to create? Sometimes it is the first time that the user is connected or the tenth, so we also know that it is not a question of creating folder.
Any help is greatly apprecaited.
Are you running AV? I've heard cases where AV slowed everything? If AV is selected, then disable and see if the performance seems better.
So I have completed my course. All along (each slides or so) I quiz questions that are classified but undeclared. They are simply there to prepare the student for the final exam. They have the opportunity to submit the response followed legends correct and incorrect. At the end of the course, the trainee meeting these same issues (55 in total), but now they are back to back and they are both classified and reported. Here, they have only the option to submit.
When they take undeclared quiz questions, click on submit and it quickly goes to the next slide, because it is set up to do. BUT on issues that are noticed and reported, when they click on submit, it really takes a lot of time to move to the next slide (and a lot of time, I mean 10 more seconds). At the end of the review, when they answered the final question, and click to go on, the two final slides take more time (sometimes up to a minute) to move forward.
I understand it is going to be some delay while the system reports the score for each slide, but this seems abnormally long. This shift occurs in preview mode, scormcloud and during a test on a LMS (Gyrus) client.
Any idea on why this is and how to prevent it. It's really hard to ask my customers to be patient and stay there for 10 seconds every single issue. I need them to take the final exam at their own pace - fast or slow.
Thanks in advance,
I know, it is barely visible, because the line between the inactive and the Active part is black on a blue background (already invited for 6 or 5.5 to change that color...) You will need to go over it all in the middle of the timeline until you see the line double cursor appearing and you can put:
Go to the next slide makes them faster. I had no problem with our LMS, but read on this forum (you know that I am often here) that some have done so. No rule of the world, by dragging the break more towards the end has almost the same effect, but you can leave a little bit more time (less than the 1.5secs).
As I know there is no way to change the sleep time by default for Question slides, as the timing is never available on Quiz Master slides.
then I had a problem with my phone here
whenever I message someone and I want to send emoticons, emoji bar any load for a long time. and then when it finishes loading and I actually managed to send messages, once more begins loading. and when I get back to the regular keyboard (not the one emoji) it once again loads for a long time.
now, it is true embarrassing cause all I try to have a conversation with a large number of emoticons, but this does not seem worked.
I tried to restart and reset even, and then use my backup...
I don't know what to do and I would really appreciate your help if you know an answer that could help.
Thank you very much
- Reset the keyboard dictionary: settings > General > reset > reset the keyboard dictionary
- Restore factory settings and do not use your backup.
Original title: why would it 3 hours 45 min burn 3.32 GB?
I put a new DVD in the disc drive and asked how I would write it (I chose to write it as a USB key). I have 2689 Articles for a total of 3.32 GB, but the current club said it will take 3 hours 45 minutes and the speed was s 500 and 700 KB per second. I don't remember * all * computer never announcing this slow burn speeds, and this particular laptop has never predicted such slow forward speed (even on the same brand of DVD). What would cause such an absurd outcome?
I think the problem is the Windows UDF format. I tried mastered and have not experienced the problem. Remember, very well written content, it just took all night. Hope this info helps someone.
After I have connected to my Windows XP SP3 laptop, it must time for Windows to finish loading and explorer.exe to become sensitive and let the start menu.
Once the start menu works, I start Firefox, which opens, and it loads the tabs that were last open, which is correct, but it is there and turns his wheels for about 2 minutes, doing nothing except showing the hour glass icon and research as it tries to load the Web page, but no status messages appear in the status bar.
Why does it is spinning its wheels and do nothing so long?
I have 2 extensions and active 1 plugin:
User Agent Switcher 0.7.3
Add to Amazon Wish List button 1.7
Shockwave Flash 10.3.183.10
See you soon.
Java Quick Starter 1.0 false [email protected] Microsoft .NET Framework Assistant 0.0.0 false
Maybe you are looking for
I can't access mozilla or internet express now. It may be a wall of fire problem, but why he can't find time?
A few days ago, I got a replacement from apple (iPhone6s) phone and drains battery much faster compared to my previous iPhone6s. So I went to check the use of the battery and the day before, the usuage and Eve has the time (1 to 2 minutes of differen
Hello I have an iMac where I set the settings to allow dictation. I also checked the internal mic and when you talk about Preferences you can see the icon save correctly the different levels of my voice. However, when I go to double press fn in my ap
I followed the Toshiba A65 manual disassembly by step-10 (see: http://irisvista.com/tech/laptops/ToshibaA65/satA65_1.htm) The Summit does not come off. There seems to be something at the front of the top security near the two holes which receive the
Is it possible to synchronize Microsoft Outlook contacts and calendar via a WiFi connection using PC Software Companion in the same way that it is able to transfer multimedia content to Media Go? Whenever I have try the PC Companion software informs