Reading text in the order files

Similar Questions

• How about the text of the .txt file output?

  This is my code:

  #include "iostream.h".

  #include 'fstream.h.

  ofstream myfile;

  MyFile.Open ("C:\test.txt");

  MyFile < < 'text ';

  MyFile.Close ();

  But it occurs the error C1083: cannot open include file: 'iostream.h': no such file or directory.

  How about the text of the .txt file output?

  I would suggest that you do in the InDesign style to match...

  InterfacePtr stream (StreamUtil::CreateFileStreamWrite (...);

  if(Stream->GetStreamState() == kStreamStateGood) {}

  flow-> XferByte (buf, size);

  flow-> Flush();

  }

  flow-> Close();

  There are lazy as CreateFileStreamWriteLazy equivalent methods.

  Deferred methods will open the file in the application, but you will always get a valid pointer.

  See docs on its use.

• Basic question on how to change the menu text in the FLA file

  I'm kind new to Flash and I'm a little stuck on where I'm supposed to change the menu text in the flash file I bought (link below).
  I can see where to change the hyperlinks in the action script for each menu item, but I can't find the text (for example I want to change the word 'Our gallery' and type 'Compétitions'
  
  http://www.abcpchelp.com/header3_fv8.fla

  Thank you!
  This forum is very good

• read text instead of .csv files files

  Hello

  I have this .csv file

  It reads something like that

  Thermistor	A0	A1	A2	A3
  M91157	3.99E - 01	2.76E + 02	1.15E + 06	1.33E + 08
  M91158	-2.02E + 00	2.23E + 03	6.15E + 05	82247419
  M91159	7.82E + 00	-6.86E + 03	3.34E + 06	-3.55E + 08
  M92506	-5.56E + 00	5.76E + 03	-5.11E + 05	3.45E + 07
  M92507	1.49E + 01	-1.28E + 04	5.04E + 06	-5.15E + 08
  M101166	-3.63E + 01	3.27E + 04	-8.35E + 06	7.96E + 08

  the only problem is... If anyone ever opens this file and save it, the formatting of the numbers has changed. I don't know why.

  so rather than let excel to open the csv file and can change the format of the file, I rather to convert this text file, so it will never change.

  Here is the current schema to read this file.

  

  Can't you just rename it to *.txt and read it as you always do?

• PDWordFinder retrieves any text in the order

  Hello

  My word document had little comment.

  I converted the word document to PDF by file-> save as-> Adobe PDF.

  I did not convert the observations of reminder. Therefore, they appear the same as in word document.

  My application uses PDWordFinder API to retrieve the text of the document.

  I noticed that the text of these comments is extract only at the last.

  Why the text in the comments (no sticky notes) is finally recovered and not in the order they appear in the document?

  Y at - it an option to make the wordfinder retrieve text in order of appearance?

  WordFinder has a variety of options for how it extracts.  See the documentation for the parameters.

• File.Read () fails with the binary file

  It's annoying me like I thought it would be trivial (and according to the docs, quite possible).

  I open a tiff file, and I'm reading all data.  I put binary encoding after opening.heres my simple code:

  var file is File.openDialog ("select the file");. leader. Open ("r"); leader. Encoding = "binary"; Alert (file. Read());

  I use this file:

  https://area51.d4creative.com/cgi-bin/fastLink.cgi?LinkId=922 & starts 5162 = & keycode = 9tlpQ3dS

  my alert box says: MM if I open this file in a text editor, there is more data after MM.  What is the problem?  Extendscript really not correctly read binary data despite demand of textbooks he can?

  Mike Cardeiro

  If I do this way:

  {
  var myFile = File.openDialog ("Select binary file.");
  myFile.open ("r");
  myFile.encoding = "BINARY";

  var myChar, myByte;
  var i = 0;
  s = "";
  While (! myFile.eof) {}
  myChar = myFile.readch ();
  myByte = myChar.charCodeAt (0) m:System.NET.SocketAddress.ToString (16);
  If (myByte.length< 2)="" mybyte="0" +="">
  s += myByte + "";
  If (I %16 == 15) s += "\r";
  i ++ ;
  }
  myFile.close ();
  $.writeln (s);
  }

  That's what I get:

  2A of the 4 d 4 d 00 00 00 00 08 00 00 00 04 00 00 fe 0c
  00 01 00 00 00 00 01 00 00 03 00 00 00 01 00 04
  01 00 00 01 00 03 00 00 00 01 00 04 00 00 01 02
  00 03 00 00 00 03 00 00 00 9th 01 03 00 03 00 00
  00 01 00 01 00 00 01 06 00 03 00 00 00 01 00 02
  00 00 01 11 00 04 00 00 00 01 00 00 00 01 15 bc
  03 00 00 00 00 01 00 03 00 00 01 16 00 03 00 00
  00 01 00 04 00 00 01 17 00 04 00 00 00 01 00 00
  01 30 00 1 C 00 03 00 00 00 01 00 01 00 00 86 49
  00 01 00 00 00 18 00 00 00 00 00 00 00 00 08 a4
  00 08 00 08 38 42 49 4 d 04 28 00 00 00 00 00 0c
  00 00 00 01 00 00 00 00 00 00 3f f0 ff ff ff ff
  FF ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  FF ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  FF ff ff ff ff ff ff ff ff ff ff ff

  Dan

• reading text on the screen saver

  Come to grips with the SW3 - already had a Martian passport which seemed much more user firendly. Can read emails I receive from google fine. When I receive a text on the game, I get a notification that I received a text but am not able to open other than on the phone (which goes against one of my main reasons to get the watch) any help would be appreciated.

  Yes, 1 message is very much in the stock application, but more that you need to see them on the phone. On the other hand gmail, hangouts etc. works as said Jean-Claude.

• 5 Lightroom can't read and import the raw file

  I can't import my RAW files from my Nikon D750. When I try to import my SD card, I am able to see the preview, but when I try to import, I get a window that reads "the following files were imported not because they could not be read. I haven't changed anything on my camera on the LR5 parameters settings and this happened just today. I am able to transfer the files on my desk at the moment, but I can't yet import from there. I also tried reformatting the card and even tried another card so I don't think that the problem is the card or the device itself. I also do not seem to see updates that I need. Does anyone have any suggestions?

  As noted of Claes, it is almost certainly a problem with your destination set wrong in the import Panel. This happens quite easily. You get the error message is almost always due to the destination without folder do not write access. Really check your destination. This should NOT be the root of your startup for example disk level and for some reason any sometimes default Lightroom at this place and then refuses to import because the OS refuses to let you write here.

• Automatically rasterize all vector drawings (less the texts) in the PDF file

  Hello

  I looked at the Adobe Acrobat documentation and also within the frequently asked questions of this forum for this specific information was not found. If I missed something, please tell me

  I have a PDF file containing a lot of vector drawing made in Illustrator. The PDF file generated from Adobe InDesign. If the PDF file is a mixture of text and vector drawings.

  I want to send this PDF document on the web, but for some legal proposed, these vector drawings should all be rasterized. For sure, I can open each. Original document to HAVE, rasterize the content, then reissue the InDesign document (so the exported PDF file's text and all raster images).

  But, as I refer to 100 pages PDF, containing, at a minimum, 150 drawings vector, it takes a lot of time to open each work in Illustrator and manually generating a rasterized copy to use in the final PDF file.

  So the question is: is it possible (in Acrobat or any plug, approx...) to open a PDF document, then automatically rasterize any vector drawings (less the texts) in a specific resolution? For example, rasterize all at 150 pixels per inch.

  With the help of Acrobat DC under Windows OS 8.1.

  Thank you very much

  Gustavo.

  You do not miss anything, there is no Acrobat tool for this.

• I'm working with Acrobat XI and when I try to add text to the geopdf file I get a popup screen that says it is a secure document and editing is not allowed. How can I fix it?

  I'm working with Acrobat XI and when I try to add text to a geopdf file I get a popup screen that says it is a secure document and editing is not allowed. How can I fix it?

  I thought about it... need to use the defined comment tool, not the set of editing tools.

• function which checks if the input text is the same as the text in the Flash file

  Hello!

  I'm doing a Flash AS2 project for learning the word and I would like to know your opinions and your advice on this topic:

  I have Word check the task, where you have to write (text input) the correct names under these 3 photos and check if you wrote them properly with the key - "CHECK!"

  It would be simple, but it is mandatory that the text of the inscription must be compared to a text file and then checked if they match.

  I added a picture to better understand...

  

  Is this possible in AS2?

  Thank you!

  you don't know.

  Use the text property of the textfield object and load the text file using loadvars.  you will have to parse text loaded using the string of flash (and perhaps array) methods.

  p.s. that apple looks more like a tomato for me.

• Need to change the text in the pdf file created in Illustrator CS6

  I need someone else to be able to change the text in a pdf file I created from Illustrator. They have full acrobat should be able to change it. I tried myself to test before you send it, but it does not work. The original file has been created in Illustrator CS6 and saved in pdf format (text not created contours). I opened the file in acrobat and try it saved as file extended to be able to change the text but not luck. You will be able to highlight the existing text and replace it. I tried to change the text of the tool, but rather only a selection box around each line of text, it puts a selection box around the text. I can highlight the text and delete it, but I am unable to change it. Each individual text line should be editable. Is there something I need to do differently in Illustrator so it can work correctly in Acrobat?

  If she help him file is a calendar and they need be able to change the dates and events that are already there.

  This really isn't an appropriate use of Acrobat. You should all use the same editing tool (i.e. Illustrator).

  Extension of files reduced the amount of editing Acrobat can do, it does not increase it.

  The editing of text in Illustrator tool would be to edit the text Document. There is no guarantee that it will divide nicely in lines, it is trying to help by making the text of paragraph.

  In theory, you can use a form for this (fill in the blank for dates) but really, you should use the same tool. Not necessarily Illustrator, more Excel or specialist software calendar.

• Change the text in the saved file

  I had a label with the text and a picture. I went back later to edit some of the text, photo and add another small picture. I do not allow me to do something with it. It is a jpeg image. I tried to save as a psd file and it still do not allow me to change anything. Any suggestions?

  If you have registered under PSD after you have added your text layers must be preserved. Open the PSD file in complete edition, and then open the palette layers. Select the text layer in the layers palette, and then click the main image to change and modify the text. Click the green checkmark to validate the and register again.

  

  Click here to see

• Read metadata from the batch file

  Hello world

  I wonder if Lightroom 3 offers a feature that allows me to read metadata from file for multiple images in a batch process. The reason is that I changed the GPS information for a couple of my photos using the pluging Geoencoding support from Jeffrey Friedl and let him rewrite in the DNG file. Since I blush as the shadow data, I don't see any GPS information in my table of metadata to Lightrrom even if the data is present in the DNG format. Now, the real question is: is there a better way to get my GPS data in Lightroom that empty library and re-import all my photos?

  Oh, and before I forget: Yes, I searched this forum - and a few others as well - and I found some stuff on information in batch processing time. However, the method presented here apparently does not apply to my problem.

  Thanks for any information.

  Good day

  f.

  In the library Module, select the grid Mode. Select all the images you want to read metadata from. Go to metadata > read metadata from files

  Similarly, you can change to time zone / AM - PM problems, etc. by going to metadata > edit Capture time

• I do not know.. inserting text in the acrobat file.

  I can't speak English well. So please understand my writing even more.
  Here is my code. It's getting on the web site and the files of the guide.
  I changed the code a little.  and a lot of mistakes at the end of compile errors is fixed.
  But in fact, when I run in acorbat receive any action.

  I really appreciate that you let me know where you're going wrong.

  
  I can't speak English well. and I am a beginner in programming.

  Please help me...

  Here is my code... Very strange?

  ------------------------------------------------------------------------------------------ --

  Headers of Acrobat.
  #ifndef MAC_PLATFORM
  #include 'PIHeaders.h '.
  #endif
  #include "Resource.h".

  /*-------------------------------------------------------
  Declarations/definitions
  -------------------------------------------------------*/

  extern GHINSTANCE HINSTANCE 'C' ;

  PDEContent pdeContent; / * Container for the contents of the page * /

  
  PDSysFont sysFont = NULL; / * Used by creation of PDEFont * /

  
  PDEFont pdeFont = NULL; / * Reference to a font that is used on a page * /

  
  PDEFontAttrs pdeFontAttrs; / * Font attributes * /

  
  PDEText pdeText; / * Container for the text * /

  
  TextMatrix ASFixedMatrix; / * Text transformation matrix * /

  
  PDEColorSpace pdeColorSpace; / * Palette * /

  
  PDEGraphicState gState; / * Graphics to apply to operation State * /

  ASUns32 fontCreateFlags;
  

  public static ACCB1 addTextCommand void ACCB2 (void * data)
  {

  
  TODO: Replace the code below to give following command user interface event
  AVAlertNote ("addText command");

  / / Create a PDEText object
  PDEText pdeText = PDETextCreate();
  
  pdeContent = PDEContentCreate();
  
  / / Text to write in the PDF file
  
  char * title = "this page intentionally blank";
  Get system fonts
  sysFont = PDFindSysFont (& pdeFontAttrs, sizeof(PDEFontAttrs), 0);
  Initialize the descriptor of police and then create the reference police.
  Memset (& pdeFontAttrs, 0, sizeof (pdeFontAttrs));
  
  Find the corresponding system font.
  pdeFontAttrs.name = ASAtomFromString ("Verdana");
  sysFont = PDFindSysFont (& pdeFontAttrs,sizeof(pdeFontAttrs), 0);
  Create the EDP of the system font font.
  Check the embedding bits to see and print fonts, or editing.
  Based on the incorporation of pieces of police, decide whether to embed or subset
  the police.
  if ((pdeFontAttrs.protection & kPDEFontNoEditableEmbedding) == 0) {
  Editing OK. Incorporate the full police.
  fontCreateFlags = kPDEFontCreateEmbedded;
  }
  else if ((pdeFontAttrs.protection & kPDEFontNoEmbedding) == 0) {
  Preview and print OK incorporation, edition is NOT OK.
  A subset of the embedded police.
  fontCreateFlags = kPDEFontCreateEmbedded | kPDEFontWillSubset;
  }
  else {
  Unauthorized coating.
  fontCreateFlags = kPDEFontDoNotEmbed;
  }
  
  Create the font PDE. Stir if allows to incorporate the information.
  pdeFont = PDEFontCreateFromSysFont (sysFont, fontCreateFlags);
  
  / / Create a DEGraphicState object and set its attributes
  pdeColorSpace = PDEColorSpaceCreateFromName (ASAtomFromString ("DeviceGray"));
  Memset (& gState, 0, sizeof(PDEGraphicState));
  gState.strokeColorSpec.space = gState.fillColorSpec.space = pdeColorSpace;
  gState.miterLimit = fixedTen;
  gState.flatness = fixedOne;
  gState.lineWidth = fixedOne;
  / / Create an ASFixedMatrix object
  Memset (& textMatrix, 0, sizeof(textMatrix));
  textMatrix.a = Int16ToFixed (24);
  textMatrix.d = Int16ToFixed (24);
  textMatrix.h = Int16ToFixed(1*72);
  textMatrix.v = Int16ToFixed(2*72);
  pdeText = PDETextCreate();
  PDETextAdd (pdeText, kPDETextRun, 0, 30,(ASUns8 *) title, pdeFont, & gState,)
  sizeof (gState), NULL, 0, & textMatrix, NULL);
  
  PDEContentAddElem (pdeContent, kPDEAfterLast, pdeText (PDEElement));
  }
  ------------------------------------------------------------------------------------------ -----
  There is no error in compiling.
  Mission of this code is to push the button, a text is inserted.
  But in fact, when I run in acorbat receive any action.
  I seem to be really stupid.
  I was desperate.
  Please help me
  

  The line

  pdDoc = PDDocCreate();

  creates a virtual pddoc.

  When you want to add text to the use of current document, the following lines:

  avDoc = AVAppGetActiveDoc ();

  pdDoc = AVDocGetPDDoc (avDoc);