read text instead of .csv files files

Similar Questions

• Reading text in the order files

  Hello world

  I have a number of text files with sampled data taken at defined intervals. I wrote a small, simple Vi to calculate the RMS of these files individually. Ideally, I want to be able to do is plot how the RMS changes over time, in other words run the VI for each file and the layout on a graph. Does anyone have any ideas if/how this can be done.

  Thanks in advance

  Jack

  Hi Jack,

  You can get an array of all your files if you use the "folder list".

  See picture attached as an idea.

  It will be useful.

  Mike

• OracleTextSearch doesn't work is not for the CSV file

  Hi all

  I use Oracle Webcenter content with Version: 11.1.1.9.0 - 2015-04-14 07:19:29Z - r126792 (Build: 7.3.5.185).

  I configured using OracleTextSearch below of setting in the config.cfg file

  SearchIndexerEngineName = OracleTextSearch

  I can search text for the file types such as text, excel, docx, pdf, but I'm not able to do text search the csv file.

  Please suggest any alternative to enable text search the csv file.

  Please find the below the example of csv file.

  "Id","CurrencyIsoCode","City","Status"
  "1","GBP","","Activated"
  "2","GBP","Reading","Expired"
  "3","GBP","Reading","Expired"
  "4","GBP","Brighton","Activated"
  "5","USD",""Atlanta"""","" Georgia""","Expired"
  "6","GBP","Reading","Expired"
  "7","GBP","Bristol","Activated"
  "8","GBP","Chicago","Expired"
  "9","GBP","Chicago","Expired"
  "10","GBP","Chicago","Expired"
  "11","GBP","Chicago","Expired"
  "12","GBP","Reading","Activated"
  "13","GBP","London","Activated"
  "14","GBP","Reading","Expired"
  "15","GBP","Singapore 068893","Activated"
  "16","USD","Overland Park","Activated"
  "17","GBP","London","Activated"
  "18","GBP","Hangzhou","Activated"
  "19","GBP","Southampton","Activated"
  

  Do something:

  Edit config.cfg and add below variable:

  TextIndexerFilterFormats = csv

  After that, save and exit. Restart the server.

  Checking in a new file csv and do a word search.

  It should work let me know again, you have a question or not

• Code protected to save a file as a CSV file?

  I forgot to ask before.  What attributes in your protected javasript code would you use to save the PDF file to a CSV file?

  Previous post:

  http://forums.Adobe.com/thread/1154321?TSTART=0

  You want to save the PDF file into a csv file even if it is the full text? The csv file is for spreadsheets only not text files.

  If you have a form, you can export the form data as a file delimited by tabs of the names of fields of form and values, exportAsText.

  Since documentation shows only a XML to csv export format forms, it is not available in a general sense for a PDF in general.

• Download must be a csv file, but download a text document

  http://www.arttimesjournal.com/data/events-August-2015.csv
  is the address that needs access to a csv file. Instead, I get a word document

  Opening of the site Web with Firefox looks like a text document. However, if you right click on [Save Page as...], events-August - 2015.csv (all files (*. *) and open it with a program such as Excel, it will appear correctly)

• I also have a .csv file with the name of a jpeg file in a column and a text description of each jpeg format in a second column. Is it possible to automatically insert a jpeg (picture) and its corresponding text, each pair on one page, in an Indesign docum

  I also have a .csv file with the name of a jpeg file in a column and a text description of each jpeg format in a second column. Is it possible to automatically insert a jpeg (picture) and its corresponding text, each pair on one page, in an Indesign document?

  Read about to merge data in the help files.

• Remove the last comma before reading csv files

  Hello

  I'm working on a VI that reads a lot of files csv (created by an application) using the built-in "worksheet File.vi reading" before combining in a report by using the excel report generation tool. 'All lines' are read in the csv file by using the worksheet File.vi reading.

  There are cases of csv files, where there an unwanted comma to the end of the line and an extra cell (with no data) appears in the final report. I was wondering if there is an easy way to remove it (rather than passing through each line and get rid of it).

  Thank you!

  You will need to go through each line, look at the last element and delete it if it is an empty string.  But a loop, it's easy:

  

  Read the spreadsheet, get 2D array of strings.  For each line, download the last element.  Test if she is a Virgin.  If so, remove it from the table.  If this is not the case, switch the blank table.

• Is there a way to select an area of some of the elements of a csv file and read in LabVIEW?

  Hello everyone, I was wondering if there was a way to select only a certain "box" of the elements of a .csv file in LabVIEW? I have LabVIEW 2011 and my main goal is to take two tables and graphs against each other. I can import the .csv perfectly and separate each line and each column to be his own, but I have a 8 X 8 but want graphic in the middle of 4 X 5 or something like that. Is it possible to extract a table without starting at the beginning and end in the end? Thank you in advance.

  Hi Szklanam,

  as a CSV file is a TXT file with a different suffix, you can read a number of lines in this file. For example, you can limit the number of rows in your table of resultung. To limit the number of columns, you must always use an ArraySubset, so maybe it is much easier to read the complete CSV file and select interesting places with ArraySubset...

• How read text file and decode

  Hi, I have a file which consists of 2 columns, it is first of all time/date stamp and 2nd is ON / OFF text.

  I would like to determine the time when the text is ON or OFF.

  I am not able to analyze the data in separate columns 2 and then read, can someone help me on this?

  The example of the file is attached.

  I was going to throw away the solution, but bob and cruz are probably right, that he is HW.

  What is the problem with your vi above, is that you are matching the model from the OFF, but you don't have a table, so your search through your entire text file and on the OFF first display you text in front of her. You must first create a picture of your spreadsheet from the read text file string. This can be done either by using a string of worksheet function array or as cruz said the spreadsheet file. Im not sure of your desired end result, but from there you can feed in a for loop and find each item ON or OFF.

  That should help you get started.

• 1 reading coulumn .csv file and display its PSD

  Hello

  I have a .csv file that corresponds to the readings (all the 1 second) voltage.

  I am able to read using LabView, I use Read spreadsheet take his exit (all lines) and then select the first column only, pass it to build a wave form and then, view the power spectral density.

  Unfortunately, nothing is displayed.

  Any ideas? The file only contains double numbers (for example 0.01234 etc.). There are 50 thousand lines.

  Thanks in advance.

  Hello

  I solved the problem in unbundeling the signal out of the PSD, then take the subsignal of greatness and him alone, then wads of scale together.

• Read/write to csv file

  Hello

  This may be a really stupid and obvious question, but I work with LabVIEW for two days only.  I'm trying to recover data to a .csv file and view it in a front panel.  I was able to do this, but I want to do is retrieve the values, then put these values in a table, and then allow the user to adjust these values, then click on a button and save the file in the same file that the values have been removed from.  I can read the values in a table and display them fine and I am able to take a picture and write new file, but I need a way to be able to use a single table that is displayed on the front panel.  Basically, what I mean is I want to get a snapshot of a .csv file and display it on the front where the user can adjust the numbers from the file and re - write in the .csv file, and close the front panel.  Is there an easy way to do this?  I apologize if this is not clear or it has been answered here before.  Remember, I'm new to all this!

  Thanks in advance.

  If you want that the user is able to change the values, you need to control and not an indicator. The problem has nothing to do with loops. If you change to a control and write in a local variable, everything should work.

• . Reading CSV file

  Hello

  I know this question has been asked several times, but I did write read the. CSV file in labview. Although I read only first coloum and also it does not read the exact value. It is rounded to almost integer. I checked all the settings in the representation of the data, but have no luck. Someone can help me.

  Your 'CSV' file contains a semicolon as field separator.

  Your VI uses the separator by default when reading the file. The default value is a character from . You also index the column even twice.

  See attachment to see how to load the file you provided...

• Can I read text files in Multisim 11.0?

  I want to take data outside. So, read text file in Multisim 11.0? Or, can I import Chart 11.0 Multisim LabVIEW?

  Hello

  Here is a step by step tutorial:

  The use of LVM in Multisim

  There is something when you configure the file LVM in LabVIEW. In the window to write in the file of the measurement , value X column field, check that you select a column only. Multisim must have this explicit time column when you import data.

  If you still have problems to fix your VI, LVM file and the circuit.

  Kind regards

• LabVIEW csv file reading does not correctly.

  I try to use the spreadsheet read vi file as follows the attached csv.

  He did some things wrong:

  (1) the first cell in the resulting table has ÿþ attached to the front of it, it looks like labview is striking some special characters, it should not? (Notepad, notepad ++ and excel can open all the file with no problem and no show ÿþ or something like that).

  (2) it is abuse characters from end of LIFE as two line breaks, resulting in empty rows between each row of data. (Looking at the csv file in notepad ++ confirms that the lines are completed with a CR and LF (same as EOL).)

  (3) I read in sub form of string, because one of the columns is nonnumeric, but then I remove this column of and try to convert the remaining string table in a digital picture (failure). It also fails if I shoot an individual element of the array and try to convert it to a number (in either case, using the string fract/exp number), below, I have an example of attempted to read from the 2nd column of the 1st row (index: 0.1) which is being shaped as a string: "1.37238168716431" and conversion which gives 0 as you can see in the snapshot of the façade into a number.

  

  

  
  

• close the reference on "read text file" - Ref num vs prefer class conflicts

  Dear users,

  Vi Analyzer asks me to close the refernce created by VI "read text file". So, I would close a refnum created by primitive VI "read text file". I used a direct wire, wiring by top and bottom of the casting, but each of them attend class conflicts (see the screenshot below). It is even possible to correctly transform the refnum (byte stream type reference) to refer (reference VI generic) and remove the refnum?

  

  See you soon,.

  You must use the close file.