SFC/scannow found but could not fix some corrupted files, how can I remove them / find them?

Similar Questions

• SFC/scannow found but could not fix some corrupted files

  Hello

  Today, I tried to install the update package 'Microsoft Visual Studio 2010 Service Pack 1', but unfortunately she didn't... Then, I wanted to check my operating system with SFC/scannow and discovered that some files are corrupt.

  I would like to know if anyone here can check the log and can tell me what files are important and if there is serious damage. I do have to know how to analyze these logs, but I don't know what needs Windows or what.
  https://rapidshare.com/files/4272859726/CBS.7z

  Thank you!

  Hi Maik,

  I suggest that refer you to the link that talks about the determination of the log files and how repair/replace files.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/SFC-SCANNOW-detected-some-corrupt-files-unable-to/aef21425-6530-464a-A18D-a4d21449aa82?page=1

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  For more information, see the link.

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista

  Note: Applies to Windows 7

  Let us know the results. We will be happy to help you further.

• SFC/scannow errors found but could not fix some files corrupted,

  Greetings! my windows Explorer still crashes so I tried to search this site for possible answers to my problem, I found one by sfc/scannow, I tried to find some probs then we found that my file explore was corrupted. It's fixable without reformat my OS?...
  How?
  I have a 64-bit windows 7 ultimate service pack 1 System. Thanks in advance for help Microsoft Community!
  Here's the part of my report sfcdetails.txt log:

  2016 01-25 14:53:05, info CSI 00000088 [SR] cannot repair the military record [l:24 {12}] "explorer.exe" from Microsoft-Windows-explorer, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2016-01-25 14:53:05, CSI Info 0000008a [SR] cannot repair the military record [l:24 {12}] "explorer.exe" from Microsoft-Windows-explorer, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2016-01-25 14:53:05, CSI Info 0000008b [SR] this element is referenced by [l:202 {101}] "Microsoft-Windows-Foundation-Package ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.1.7601.17514.WindowsFoundationDelivery '.
  2016 01-25 14:53:05, CSI 0000008e Info [SR] could not reproject corrupted file [ml:520 {260}, l 28 {14}] '------? \C:\Windows"\[l:24{12}]"Explorer.exe '; source file in the store is also corrupt.

  In safe mode and clean the boot, what was the results?

  Do you have the Windows 7 DVD?

  Follow the steps in the following Microsoft Support article:

  8.1 Windows, Windows 8 or Windows 7 hangs or freezes

  Warning before you perform these troubleshooting steps:

  System Restore: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Disk check: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Security scanner: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Also, try the steps in the following Microsoft support article:

  Optimize Windows performance

  Please post back with the results and the information requested, we will be happy to help you further.

  ___________________

  Thank you best regards &,.

  Isha Soni

• Scannow found problem, could not fix, called file journal CBS but windows does not give me access to see

  Update not working - tried everything, including the command prompt scannow - he found problems but could not fix, then referred me to a CBS log file to see - but Windows will not give me access to the file to see.  What gives?  Of course, I have a problem - how to fix?  sfc/scannow info below:

  Microsoft Windows [Version 6.0.6001]
  Copyright (c) 2006 Microsoft Corporation.  All rights reserved.

  C:\Windows\System32>sfc/scannow

  Start scanning system.  This process will take time.

  Start of the phase of verification of the scanning system.
  Full check of 100%.
  Windows resource protection found corrupt files but was unable to repair some of th
  EM.
  Details are provided in convertible bonds. Journal windir\Logs\CBS\CBS.log. For example
  C:\Windows\Logs\CBS\CBS.log

  C:\Windows\System32 >

  The update which is a failure? The .net 4.0 security update?

  If so, try this:

  Credits go to Control_tps
  
  Try the following steps, please:

  1. go in programs and features, click on it.

  2. scroll to the bottom for Microsoft.Net Framework 4 Client Profile, do a right click.

  3. we will give you a choice of uninstall/change, click it.

  4. then it will give a choice to repair, choose repair. It will take about 4 to 10 minutes to repair (with my PC) experience may vary.

  5 once completed, will update you Center and update again.

  If not fixed, try to remove .net Framework 4.0 with the .NET Framework Cleanup Tool (http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx ), reinstall it and install the updates.

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• SFC/scannow found he could not repair corrupted files

  Running Windows7 32 Bit

  Found several Pots every 5 to 7 years in which this issue; hoping that there may be a newer better way to solve the problem... so seconded and fingers crossed.

  * PC froze

  * Powered off / Powered it back on

  * Selected Normal boot started fine on the desktop PC

  Decided to run sfc/scannow.  "At the end it read: Windows resource Protection found damaged, files but was unable to solve some of them.

  Looked at the log CBS.log file.  It might take some time to review and even if I saw it that I would not be able to choose the corrupted files, nor know how to find and replace... and don't know if I was smart enough for that I could even remove and replace the files of the operating system.

  I realize I've read in some real old Posts on this topic, maybe some corrupt files are not really necessary or important... but I'd rather have a good job of OS.

  So is there a way to better\newer to resolve this issue... instead of finding what could be one is necessary in the files of the boot of Hay, then looking for right files to replace those damaged?

  I note an In BONE repair on-site... that worries me, because the software just doesn't do well after a repair on the spot.

  Looking for replacement option, and eager to have a BONE without corrupted files and corrupt files... If on-site repair is my only way to go... What are the actual steps not excluded... I have my original Windows7 DVD...

  Haven't tried using the system restore, given that this feature would not replace the corrupted files back to a previous restore point...

  Very well.

  Marking of my previous response as RESPONSE will officially close your thread.

  

  PS: Wouldn't mind a USEFUL vote while you're there either.

• I inadvertently installed some calendars. How can I remove them?

  I installed inadvertently calendars too and I can not install more. How can I delete unwanted schedules?

  Open the Calendar tab. You see a list of your installed calendars to he left?

  If not, go to view. Calendar | Calendar component in the menu and make sure "Pane calendar" and "Civil list" are both selected. If there is a sign more or the arrow next to "Calendar", click on it to view your calendars.

  (No menu? Press the < alt > key on your keyboard.)

  Now, you can select any calendar in the list, right-click, and select 'delete the calendar '.

• I have crash reporting off, but still not the popup every time - how can I remove crash reporting altogether?

  Win7/FF31

  Thank you
  CC

  Thanks - I guess it's a way of saying that I have to continue to manually uncheck the box every time. So I guess I should change my question to "what is the point of having a 'crash reporting enabled' option setting if I still disable it manually every time?"

  Edit > shortly after I posted FF crashed again. This time the check box is unchecked (correct behavior). Please disregard above - I'll mark it resolved and re-post if problem persists...

• Could not open vmfs-&gt; Access-&gt; error how can I remove this vmfs

  Hi, I have a problem with my ESX 4. When I try to connect a NFS drive I get an error "cannot open volume: 193b2XXX" (same as in the screenshot). After playing with the console I figured this out:-see screenshot.

  How can I get rid off the vmfs which is "access denied"? Plese give me the commands to the console to do this.

  Thanks and regards Marcel

  Strange that your directory property has changed.  Run ' chown root: root vmfs/volumes / *' and then run esxcfg-nas command again.

  -KjB

• I have five additions to my list when I go to the front of the Contacts on my e-mail address. They do not appear in Contacts. How can I remove them?

  Here are five additions. FunRoom, HornyGirlHere, KinkyChat, NakedFunRoom, and WebCamChat. There is no email address.

  Hello

  ·        Which email service provider or email client do you use?

  ·        Exactly where do you see the additions?

  If you use Hotmail, then post your query to the hotmail forum:

  http://windowslivehelp.com/product.aspx?ProductID=1

• sfc scannow found errors, but could not fix

  I have problems with cleaning disc. It runs, but never opens the window after execution. It gives an error at the bottom of the scan window "system error statement qued files.

  I ran sfc scannow and it finds corrupted files, but could not fix them.

  What should I do now?

  Thank you

  Jack Bowles

  Thanks for your information. I thought it was a waste of time and was upset to have to wait an hour and a half for it ends. I was under the impression that Check Disk would only verify that clusters are only valid as in they can keep information. But Check Disk resolved my sfc/scannow gap with files are corrupt.

  In addition, the utility repairman to start ran a test after a missed start and I noticed, he said there is a corrupted driver. She did not mention that now after running the disk check.

  All things look good now thanks to your information AirDump. My problem occurred after dust removal on my PC. I think that the plug for the power supply was the problem because he was a coward. Or maybe on the SSD cable was loose?

  Thank you very much for your time,

  Scott

• I get this error "Flight Simulator could not load some program files and will now close" - does anyone know how to solve?

  I get this error "Flight Simulator could not load some program files and will now close" - does anyone know how to solve?

  Hello

  I suggest you to please follow the steps described in the following articles and check if it helps.

  "Invalid product key" error in Microsoft Games, MapPoint, or Streets & Trips

  http://support.Microsoft.com/kb/812467

  How to get a new product key for Microsoft Games for Windows, Streets & Trips, or MapPoint

  http://support.Microsoft.com/kb/973457

  Let us know if it helps!

• Error: "Flight Simulator could not load some program files and will now leave." at the start of the game after installing the reduction acceleration expansion Pack.

  Hi I just bought a copy of Microsoft Flight Simulator gold edition. and after installing and playing on the deluxe edition, I decided to add the extension of acceleration. and after installing the extension, the game no longer works it comes up with an error message saying "Flight Simulator could not load some program files and will now stop. Please reinstall Flight Simulator to restore or repair the installation of the program. ».

  Now, after a few days looking for a response, I decided to ask the guy who made the game.

  The error message also appears when I download just 2 service packs of Microsoft also.
  I have a laptop HP 630 with a processor intel core i3 - 2350 m cpu @2. 30 ghz, 2 GB ram, windows 8 pro 64-bit

  Original title: fsx gold edition...

  Try this, it worked for me:

  (1) uninstall normally from the control panel.

  Reinstall 2) in the Windows directory (C: here)

  (3) install SP1, SP2

• I open a file with photoshop and all my files are now trying to use photo shop to open them including some programs. How can I change them back?

  I open a file with photoshop and all my files are now trying to use photo shop to open them including some programs.  How can I change them back?  I use Vista and have little knowledge of computers but I can follow directions.  Thank you

  I open a file with photoshop and all my files are now trying to use photo shop to open them including some programs.  How can I change them back?  I use Vista and have little knowledge of computers but I can follow directions.  Thank you

  Try this simple tutorial. No guarantees.

  Restore the file type associations:
  http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html

  Scroll down to exe - executable application files.
  Click on the exe

  Follow the instructions in #1 à #7 at the top.

  Scroll to lnk - shortcut link (LNK) files.
  Click on lnk

  Follow the instructions in #1 à #7 at the top.

• I just bought a license for an image, but the watermark is still there. How can I remove it?

  I just bought a license for an image, but the watermark is still there. How can I remove it? The FAQ says the high resolution is available after purchase.

  There are several threads on this...

  Go to your "history of license."

  

  Click on the image you want to download to go to the details page for this image.

  

  Click on the "download the desktop" (or wherever you want) link

  

  The downloaded version will be the watermark removed.

• repair Windows XP registry needed. (windows live care scanner errors found but will not fix them)

  I am running Windows XP with IE 8 and Norton 360. I do updates regularly and also use the Windows Live One Care Safety Scanner. Each Analyzer detects a problem sometimes, and fix it. The Windows tool still found some problems in my registry and fixes some but not all. I'm still running a slow processor but there are times when the hard drive starts to crank and system enters a State bound upward to do something that takes forever and finally unlocks. If I look in the Task Manager, it is usually System Idle Process and ccsvchst.exe which is cranking up the numbers in the use of CPU time CPU and MEM. I have also a ton of svchost.exe running. I would like an easy way of fixing and removal of registry problems and then making sure the running processes are legitimate and not set not a priority as they seem to be. Thank you.

  If you have a problem with ccsvchst.exe, you do not have a problem with XP - you have a problem with Norton and it has long discussed performance and ccsvchst.exe problems accompanying the Norton forums.

  No single AV tool seems to know everything and Norton is whatever is not because your system is not infected.  It simply means that Norton doesn't find anything he knows.  If all goes well, you use more than one tool of analysis, but not more than one both if there is a real time involved protection they'll get in the way of the other.

  In some reviews, Norton has a reputation as one of the most famous system CPU and memory hog on the market - you could not picked up too more than AV tools with a more unfavorable reputation in this area, but some people really seem to it.  I think it's too fresh generals.

  You can temporarily uninstall it (using their special uninstall of course), reboot and see how your system works without him and then decide if keeping it is 'worth it' or consider broadening your horizons AV a bit.

  You can find out exactly how long your system takes to start down to the tenth of a second and determine exactly how long each process takes to start and then decide what to do (as opposed to guess).  For example, I know that my system takes exactly 28,03 seconds to start.

  When you see a report and a chart of your startup process full of one end to the other, it's more revealing and informative.  If you want to do this, we can tell you how.

  Unfortunately, the forums MS Answers don't ask not even basic on a system information when a new question is asked, so we know almost nothing about your system.

  If you want to talk a bit, follow these steps:

  Please provide additional information on your system:

  Click Start, run and enter in the box:

  Msinfo32

  Click on OK and when the system info summary appears, click on Edition, select all, copy, and then paste the information here.

  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.

  You can also take a screenshot of your task manager or process and post it for review and analysis (there is an example below).

  This is my standard copy/paste on the way to understand the multiple svchost process (what a ton of them means to you) that you see in the Task Manager:

  You may be able to get clues with what is happening with your svchost process using the Task Manager and maybe understand.

  You will always be able to understand what is happening with your svchost process if you use Process Explorer.

  Download Process Explorer, so you can see what is 'really' running on your system, especially behind those svchosts several process see you in the running task manager.

  Download Process Explorer from here:

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  You'll like Process Explorer when you get the hang of it.  Process Explorer is the Manager of Windows taskbar on steroids.

  Process Explorer installs nothing so it won't slow down your system since it works only on request.

  Process Explorer can seem a little intimidating at first because it has so much information, but you will begin to make love the way it works when you're looking for performance problems.   You can even say EP you want it to be your new default 'Task Manager' value in the future.  You can always run the original tasks as Manager.

  Once you get Process Explorer running, expand the columns, made drag the corners of the screen for it's largest, etc., so you can see as much information as possible in the window.  Now you can really see what is running on the system.

  Here's a screenshot of my poor system when I use Process Explorer:

  http://img222.imageshack.us/img222/2567/ProcessExplorer.PNG

  The CPU column is usually the most interesting start with performance issues - which uses the most?

  It is OK and normal to have several svchost running processes.  Important XP Services are actually runs under the svchost process. There are sometimes an XP Service that runs under a svchost process, sometimes there are several Services in XP, which runs under the svchost process.

  Sometimes malware will hide behind a svchost process because the malware knows that you won't be able to find it in the Task Manager.  He will hide behind a svchost.exe process to deceive you, but you can outsmart it.

  Malicious software can disguise itself also seems to be a legitimate process of XP or he could hide under/behind other processes that you see running in Task Manager if you can't see the execution.

  The malware would trick you into thinking you must use a System Restore Point, run a repair install or reinstall your XP from scratch when you really don't.

  Looking at the display in process Explorer, you want the CPU most to be associated with the system idle process.  It's 'free time' on your system, so more time there, more free.

  If you look at the graphs of performance and see red spikes (or not) double click the graphic in the upper left corner to display the graph to use.  Move the mouse over any pics to see what are the causes.  Even if the Spike has already scroll screen, you can still move the mouse over the edge to see what caused.  You can also just wait for a pic to happen and then see what caused the Spike.

  To help understand your process svchost and what is running under them, read this article and you will be smarter than the average bear:

  http://www.bleepingcomputer.com/tutorials/tutorial129.html

  Then with a few Google searches, you can watch every thing running behind your svchost process and Process Explorer and see what it is and decide if your configuration needs it or not and then decide what to do about this.

  If you think you have a svchost.exe process amok, run using Process Explorer, you can right-click that offensive svchost, properties and on the Services tab and son, you can see which runs under it.

  There is a CPU column it will expand (make the wider column) so that you can see CPU.  Maybe you can spot what background process is so CPU consumption under the svchost.exe process.   Stroll under the svchost process and you will find the problem.

  You can also see what is running under each svchost simply by pointing your mouse on the svchost.exe process.  Some of them have just a things working under them and some will have several things (I hope that all the legitimate XP services) and some will have a lot of things.

  If you have a svchost process that is afflicted, which runs under your afflicted?

  No running process must defy reasonable explanation.

  First, see what you can find using Process Explorer, then if nothing is obvious, additional advice.