reading the contents of a directory

Similar Questions

• I have a disc in my Mac and can not understand about where to go read the content?

  I have a disc in my desktop iMac computer and can't figure out how to break through the buttons right or my computer to read the content of the program?

  Double-click the icon of the disk on the desktop. I hope that you have installed an application that can read the content for you.

  If you don't see the icon of the disk on the desktop, open the Finder, then go to the Finder menu bar and click Finder > Preferences, and then select the general tab and then make sure: CD, DVD and iPods is selected.

• iTunes cannot read the contents of the iPhone "iPhone 6 more»

  Please help because I can not backup my iPhone 6 Plus for my iMac and iTunes asks me to wipe it.

  When I connect the iPhone 6 Plus for the cable of the lightning, he says this: -.

  "iTunes cannot read the contents of the iPhone" IPhone Steve 6 + ".." Select the summary in the iPhone preferences tab and click on restore to restore the iPhone to factory settings. »

  The last back up, I've done was there a little more than 12 months and is an older version of iOS also so if I do a restore of the backup, it will be bad and lacks important information.

  Since then, I upgraded my iMac to El Capitan and updated my iPhone to iOS9.3.2 (just be updated to 9.3.3 now)

  System & software Specs are as follows:

  iMac 27 "V10.11.6 El Capitan (15G 31)

  iTunes V12.4.2.4

  iOS9.3.2

  Any help would be thank you very much.

  Please see the comment by David Lewis21 in this discussion of the CSA. I have not tested its solution, I can't vouch for it, and I have no other information. Try at your own risk. If you don't want to take that risk, I suggest that you contact the Apple Support.

• iTunes cannot read the contents of the iPod

  On a model MC540LL/A iPod running iOS 6.1.6 I get this alert:

  iTunes cannot read the contents of the iPod "IPod of Carl Carlson". Go to the summary in the iPod preferences tab and click on restore to restore the iPod to factory settings.

  There is no summary tab or the restoration.

  I have

  Restore all settings

  Erase content and settings

  along with several others that appear irrelevant.

  Which is appropriate?

  Thank you

  Connect your iPod to your computer and restore via iTunes

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

  You can then restore the backup:

  To restore backup see:

  Restore your device from an iCloud or iTunes backup - Apple Support

  https://support.Apple.com/en-us/HT204184

  If you restore from a backup of iCloud apps will be automatically downloaded. If you restore from backup iTunes, applications and music must be in iTunes since synchronized as music media library and apps are not included in the backup of the iOS device what iTunes does.

  You can re-download most of iTunes purchases by:

  Download after purchase from the App Store and iTunes Store iBookstore

  https://support.Apple.com/en-us/HT201272

• Cannot read the contents of the phone

  My husband iPhone 6 has attracted 13 GB of data.  I use my phone more it does and I only use 6. Something has been bad for months, we have both called Verizon and nothing has helped. I'm trying to upgrade his phone now and iTunes tell if cannot read the content and I need to reset the phone.  I don't want to do it in case it is not completely saved.

  He was frustrated with his phone for months, may not have music on it, full, etc...

  I saw a solution in a similar thread, but did not want to download a 3rd party app to try to fix it.  Waiting for people to apple to help me understand this. Thank you!

  Please notify. Thank you!

  See if this thread (more old, but related) helps. ITunes cannot read the contents of the iphone

  If you're still using OS X 10.5.8. That being the issue. iOS 9 requires 12.3.x and this is the notability on OS X 10.5.8.

  -AJ

• Read the contents of a cell in an Excel sheet

  Hello

  In an Excel file, I have several sheets in one leaves (for example: Dispersion) I have a cell that is located in column 3 and line 5, this cell contains a value (for example, 500). So since a VI, how can I read the contents of this cell pour out the value 500?

  If I only have a map I can USE the function 'Reading worksheet File.vi' Pour lire into a txt format file, but here I have an Excel file with multiple sheets in there, how can I read a cell in a spreadsheet says? Thank you for your lighting. Good week end to you all.

  Hello, the privilege of this take a look on.

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/3409

• How to read the contents of the attachments to the record listener?

  Hi all

  We have a blackberry user interface application that implements FolderListener. The messagesAdded(FolderEvent e) public void in the record listener method is called whenever a new message arrives on the device.

  Now, there are some emails that will also spare.

  Can someone tell me how to read the contents of the attachment?

  I can read correctly the content of the body of the email.

  Our code to handle the arrival of e-mail for your reference is mentioned below.

  public class MyUIApplication extends UiApplication implements FolderListener
  {
      public void messagesAdded(FolderEvent e) {
          Message orginalMessage = e.getMessage();
  
          Folder messageFolder = orginalMessage.getFolder();
  
          if (e.getMessage().isInbound() == true) {
  
              String sender = orginalMessage.getFrom().toString();
              String subject = orginalMessage.getSubject();
              String body = orginalMessage.getBodyText();
  
              String attachmentContent = ""// Read atachment content here?
  
              // some more code
          }
      }
  }
  

  Any help in this regard will be appreciated.

  Thank you.

  There is no way to prevent a menu item to be added to an AttachmentHandler.  When a user clicks your menu item will be called the run method.

  If you have registered an AttachmentHandler for your type of attachment and the prefix the file name of the attachment with x-rimdevice, you would be able to access its contents of in a FolderListener.

• Cannot read the content of the XML resource: IDD_SSH_KEY_CHANGE_DIALOG

  Spec Mac: 10.10.3 (14D136)

  I am trying to connect to my server and I get this message:

  Cannot read the content of the XML resource: IDD_SSH_KEY_CHANGE_DIALOG

  Followed by this message:

  An FTP error occurred - cannot connect to the host. You login or password is incorrect. Please check your login information.

  I checked my log, server details, and they are correct. I asked for the support of my server, but not luck. What should I do?

  Thank you very much. I managed to resolve the issue. What I missed, is that I couldn't find the file because it was hidden. So it is visible in "terminal", I could easily follow the instructions to solve the problem. To view the files in terminal go to this link (for someone else):

  OS X hides your library folder

  Thanks again!

• Acrobat Pro read the content in the pdf file and turns?

  Acrobat Pro reads the content in the PDF and Fourier Transforms to xls files without need of a lot of changes or manual work?

  Acrobat X (Standard and Pro) will save tabular data in XLS or XLSX format, it can recognize the table as being a table. If the PDF file has missing or incorrect structure tags, Acrobat will try to guess the tabular presentation by the position of the text and lines on the page - this works well for basic formatting, but if the table has a complex style, spans cells etc. it can cause problems.

  Acrobat X will try to export a table in a scanned document, by applying the OCR during the stage of export - yet once this is based on the table identified visually.

  See http://www.adobe.com/products/acrobatpro/pdf-to-word-excel-converter.html and this article on how to extract an array of a larger document.

• Read the contents of a file (via the)

  Hello

  I need to read the contents of a file (.txt, or better, .jpg) and write again in another file.

  I have this code (in Javascript):

  Conn = new Socket;

  Conn.Encoding = "BINARY";

  If (conn.open ("127.0.0.1:8888")) {}

  Conn.Timeout = 30;

  Conn.writeln (' GET variousFiles/file.jpg HTTP/1.1 "");

  response = conn.read (999999);

  Conn.Close ();

  var file = new File("C:/APPS/New_File.txt");

  leader. Encoding = "BINARY";

  var open_file = file.open("w+");

  leader. Write (Reply);

  } else {alert ("error:" + conn2.error) ;}}

  However my new file is always empty, because I can not read the contents of the first file.

  My variable ""answer " is always empty. "

  Thank you and best regards.
  

  Hi Bob and Muppet,

  below are my new code:

  conn2 = new Socket;

  If (conn2.open ('127.0.0.1:8888', 'BINARY')) {}

  conn2. Timeout = 6000;

  conn2. Write ("GET /Temp1/file.jpg HTTP/1.0\n\n");

  reply2 = conn2.read (999999);

  conn2. Close();

  } else {alert ("Error:" + conn2.error) ;}}

  This seems to work perfectly, I managed to read the jpg file.

  Thank you

• Is it possible to read the contents of the XML file rather than the properties for the location of FLEX

  Is it possible to read the contents of the XML file rather than the properties for the location of FLEX

  Strictly speaking, this is not really true. When running, the ResourceManager of IResourceBundles for localization, not deal with XML files or properties files. As long as you implement IResourceBundle, you can back it up with XML, properties, JSON, AMF files - what you want. The problem is that mxmlc will not build modules of resources for you what it is, with the exception of properties files, and cannot compile just resource bundles in a .swf using anything other than properties files. If you build your own interface to spit IResourceBundles, this could work, but it is probably more trouble that it's worth.

  (Assuming that you establish the link in the application) the best solution is to write a script to pre-process the XML in properties files.

• How to read the contents of ps_txn (content column)?

  I'm trying to debug our BC4J ADF application that doesn't seem not to manage AM release correctly and therefore table PS_TXN grows over time. I was wondering if there is an easy way to read the contents of its "CONTENT" BLOB column?
  
  Rade

  Rade,
  Sorry for the confusion. I meant 11g. SQLDeveloper in JDev integrated to 11g.
  You can use the standalone SQLDeveloper 1.5.1 1,5,2 or 1.5.3. All behave as I've described before.
  You can even export the connection of jdev an import in SQLDeveloper.

  Timo

• Need expert help! CD player does not read the contents of the disc. Help!

  I searched and tried everything what we can imagine and impossible to find a solution. I can also restore because I don't really know this error at startup. Here are the symptoms and fixes I've tried. If there is someone out there who could help me it would be greatly appreciated!
  

  System:, I have XP w/SP3 installed. Dual-Core 3.0 G w / 3G P5N72T - MB Ram, HD 300 G, Asus CD/DVD Drive.

  Symptoms:

  • I had my CD player connected via PATA ribbon cable and my hard drive connected via a SATA cable.
  • My CD player will not autorun when an installation disc is installed.
  • My CD player will not read or display the contents of the disc when I use the file Explorer.
  • My letter of CD drive is D:\ and always appear as one of the discs.
  • When I use the command "run" and type: D:\install or D:\setup a windows "disk is not formatted" error appears stating "Windows is unable to read the disc. The disk might be corrupted or it could be in a form that is not compatible with windows.
  • My Green CD player will sweep on and I can hear it turn every time I try to explore the files or after I insert a disc, but she never autoruns, or displays content.
  • I decided to buy a new SATA CD drive and installed, unfortunately it does not work either exact problems remain.
  • I have two CD drives to another computer and they both work. So I know this isn't the disc or the lens.
  • I ran the utility Microsoft Fix It and she finds nothing wrong.
  • I ran the TweakUI to make safe autoplay features are on.
  • I did all the registry fixes proposed by microsoft and online forums. i.e. upper and lower, filters etc.
  • I removed the device from Device Manager and reinstalled.
  • I ran a virus, spyware, malware, and everything is clean.
  • I have the latest version of the system bios and all settings are fine. Most are on Auto that are associated with the detection.
  • Type of device DMA modes are selected in automatic detection.
  • If I could read a disc that I could try to reinstall windows XP, but it is not an option now until my CD player is fixed!
  • I don't have any installed like Nero buring CD software.
  • I actually installed Nero Light to see if it would read a disc, and of course I can see the disk and copy its content to my hard drive or take an image of the disk.
  • I tried to rename the drive, disconnect the drive.
  • I'm sure I tried other things, but can't remember right now!

  Thanks for your help in advance!
  Mike

  Hi msavage2000,

  It seems you have tried most of the steps to solve this problem. However, we would like to know if the drive does recognize the drive?

  As we know readers work, I would like you to try a new PATA/IDE cable and check the result.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows XP Professional SP3 recognizes D DVD/CD-RW drive in my computer, but does not read the content.

  Control Panel indicates that the COMBI RW16x10/DVD unit. Properties indicate that a new disc has no free space.  Does not read CDs or DVDs with the content.  All indications from the Panel indicate that "device is working properly", but I can't read anything. Updated and modified drivers and troubleshooting I tried without success.

  Troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD

  Please click on the link below and follow the steps as indicated on the page. This should solve the problem.

  http://support.Microsoft.com/kb/321641

  MD MOEEN AJAZ KHAN (MCP)

• How to read the content .vmtx of the file using PowerCLI

  Hi all
  
  I have a virtual computer model in one of the NFS attached to my ESX host data stores.
  I need to get the display name and some other details of the vmtx this model file.
  Any method to get values from vmtx file using PowerCLI... ?
  
  Thank you in advace for all help.

  Hello, MattGeorgey-

  One way you could do this would be to use the Copy-DatastoreItem cmdlet to retrieve the .vmtx file, and then you can read it, Get-Content on it, etc., as you please.  Something like:

  ## copy the VMTX file from the datastore to a local spotCopy-DatastoreItem vmstore:\MyDatacenterName\my_datastore_name\myTemplate\myTemplate.vmtx C:\temp\.
  
  ## get the contents of the VMTX file$colVMTXContents = gc C:\Temp\myTemplate.vmtx## get the line that contains the "displayName" value$colVMTXContents | Select-String displayName
  

  And, you can access some of the elements that are specified in the file .vmtx using the property Config.ExtraConfig of the display of the model as object:

  ## get the template object$tmplMyTemplate = Get-Template myTemplate## get a particular value for an ExtraConfig item$tmplMyTemplate.ExtensionData.Config.ExtraConfig | ?{$_.Key -eq "nvram"}
  

  How do I?