No sign of entry on the screen
Sound of my laptop was not working so I decided to update the software. Then it froze with the wheel of color and finally rebooted but froze again and no poster now a no sign of entry. What can I do? I tried to restart it and followed the different directions of the internet.
I recently had a similar problem and had a no sign of entry when I try to start my mac, I found it was to do with FileVault, the origin of the problem, I discovered this and it worked for me, it may be useful
Mac boots to no entry sign
This will help only if the problem is caused by FileVault.
To confirm that FileVault is the startup on cmd - r problem, select reinstall OS X, follow up when you select the drive to install the operating system. If it says "FileVault ongoing conversion.
Use the preferences window 'Security and privacy' to check the status of the conversion.
To fix
Close the device
'Shift' and press power once.
When charges Apple Logo appears let go 'Shift '.
This will start in the Mode without failure.
Go to; LaunchPad
Other
Terminal Server
In a Terminal type "sudo fdesetup disable.
Follow the instructions on the password and once it is said FileVault has been disabled.
Switch off the appliance.
You can try to restart normally, however most likely will have to restart under cmd - r and reinstall the OS.
These are deactivees FileVault.
Once the operating system is reinstalled the unit should operate normally and you can turn on FileVault return: settings, security and privacy, FileVault.
My guess is that this problem is caused when the device is not shutdown properly when encrypting files for the first time after installation.
Please Note * do this at your own risk of loss or corruption of data, data should not be affected by this, but there is a possibility.
Tags: Notebooks
Similar Questions
-
rapidwiz d ask several other entries of the screen
I check did'n express install, I installed R12 and rapidwiz d require a lot of screens as characterset, additional, country-specific features, configuration of the node product license primary apps etc, any idea why? & how to adjust all these stuff later?If you install Vision, you get AL32UTF8 characterset with all products under license by default.
The following guides should help you.
Oracle E-Business Suite Setup Guide: using quick installation
http://download.Oracle.com/docs/CD/B53825_08/current/Acrobat/121oaig.PDFThe Oracle eBusiness Suite system administrator guide - Configuration
http://download.Oracle.com/docs/CD/B53825_08/current/Acrobat/121sacg.PDFGuide to globalization for Oracle Applications version 12 (Doc ID 393861.1)
-
HP Envy 700PC: "entry not found sign" and the snoring of the enclosure of the screen
Lately has been a problem with my computer. I think that maybe the graphics card is wrong.
I have a:
HP Envy 700PC
Model: 700-300z
Still under warranty
Everything is the same
Upgrade to Windows 10
The first time it happened I was listening to music on Pandora while working in the room. I look above on my HP screen it say "Signal entry not found" screen will sleep mode but I couldn't ehre still play music. I repeated press ENTER, but he wouldn't return. After several reboots, the screen came back to the top.
Recently happened during the game World OF Tanks. What's happened is that my speakers are beginning to make a buzzing sound. He is yet to come of the audio, but it is really low. I then restart my computer to see if that solves the snoring. The HP logo appears and windows 10 thing round runs below it. Then my screen turns off and says 'not found input Signal. I repeated press ENTER, but it is not. I reboot and still the same thing happens, restart again and it's same thing, once again, but this time it starts normally. Once rebooted Windows speak it sound goes.
Last night I was playing WOT and the same thing happened with the speakers hum. I went to restart and got the white screen with the 'not found input Signal. I hit enter but he wouldn't do anything. I restart 3 times and still the same problem and the snoring has not disappeared while the screen was blank. I unplugged my power and the HDMI from the screen. I got out my old screen and hung up and that the screen worked fine and I've been to my login screen. Then I logged. Then I unplugged my old screen and hung to the top of my screen and my screen was now working well and rose windows.
I'm tired in making sure that the HDMI is secured to the back of the tower and when I wiggled it my speakers started to hum again. I left if go and after awhile the snoring got quieter.
I opened the tower and my graphics card fan works well, and there is no dust.
I've updated all my drivers with "Drive Booster" and they are all up to date.
Thank you for product information...
What is likely to happen, it's that, as is all too typical, that the UPGRADE of Win10 have not installed the drivers for your video card, so that Windows can not see properly.
The good news is that HP does not provide Win10 video drivers for your PC, at this link: http://support.hp.com/us-en/drivers/selfservice/HP-ENVY-700-300-Desktop-PC-series/6886619/model/6890453
The bad news is that HP provides several other different, and I have no way to know which driver is made to your machine because I have no way of knowing what video hardware, he has in him.
If you look in Control Panel-> Device Manager and there it says that you have the hardware, then you will know which driver to download and install.
Good luck
-
The application Sever on one of my computers has several duplicate entries in the initial screen "choose a Mac" that appears just after the launch of the application server where you choose the particular Mac which you want to connect.
My server is in the local IP 10.0.0.5, but there are two entries for it in the list for a reason any, as you can see here:
I can choose is entered to connect without a problem. They seem to be legitimate duplicates. So I would like to remove one of them.
Does anyone know where these entries are stored in the file system, or how to remove one of them in the list?
You can manually edit the plist, or simply remove to rebuild the entire list:
~/Library/preferences/com. Apple.Server.v4.plist
-
When I open Firefox there is a black bar, sometimes vertical, sometimes horizontal, in the upper part, with links to maps, Gmail etc. When I opened Gmail the same links are listed at the top of the screen, just under the tabs. In my wife's cell phone, it appears in the Firefox splash screen, but not in the form of Gmail. In the top of the screen is an extra-large gray bar with just one Google search box entry. Is this a problem of Firefox or Google?
She has XP Home SP3 and Firefox 9
Thanks for any help.
Is there still the Google URL in the address bar?
Reload Web pages, and ignore the cache.
- Hold SHIFT and click reload.
- Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
- Press 'Cmd + Shift + R' (MAC)
-
Portege M930 - entry of the finger on the touch screen no longer works
Got one of these
https://www.MyToshiba.com.au/products/computers/Tablet/M930/pdw04a-00c001/specifications
Is no longer able to use the entrance of finger on the touch screen.
Pen works on touch screen OK.It's like if I had accidentally disbled it somehow.
Cannot find any reference to a key or switch to toggle finger on the touch screen to enter the manual in pdf or google.
Does anyone know how to re activate the finger of entry for the touch screen on a toshiba portege Tablet M930?
Hello
The fingertouch can be disabled.
Go to the control panel? Pen & touchin the Pen and Touch Settings window, click on the contact tab
Check or uncheck the checkbox next to your finger as input device
Click on apply and then OK -
How can I remove a "do not disturb" sign for a specific contact? Their messages will not appear on the screen of my phone when it is locked
kochetova01 wrote:
How can I remove a "do not disturb" sign for a specific contact? Their messages will not appear on the screen of my phone when it is locked
Go to the message - details - do not disturb - off
-
Well as I said the game stops after about 7 minutes no signal sign is that the screen turns off. I just got sims 3 world adventures expansion pack. the rest of my computer runs well. and games says im to update so I do not know someone help me please.
Check if the graphics cards is upda to date. If this isn't the case, then update the website of the manufacturer of the system.
You also have a malware scanner to check that there is no infection. -
I stop my new laptop with Windows 7, install new updates. But now my laptop won't charge. There only dark blue screen. He won't even have to sign on the screen. Someone at - it happen?
Hi ctgreen
Welcome to the Microsoft Answers site!
You can try the following and link methods under each method for more information on the same and see if one of them solve the problem.
Method 1: Start the computer in last good known Configuration
- Remove all floppy disks, CDs and DVDs from your computer and restart your computer.
Click the button start , click the arrow next to the button lock , then click on restart.
- Do one of the following:
· If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.
· If your computer has more than one operating system, use the arrow keys to select the operating system you want to start, and then press F8.
- In the Advanced Boot Options screen, use the arrow keys to select last good known Configuration and press ENTER.
- If your computer has multiple operating systems installed, use the arrow keys to select the operating system that you want to start using the last good known Configuration, and then press ENTER. Windows will then resume starting normally.
http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration
Method 2: Start your computer in Mode safe
1. remove all floppy disks, CDs and DVDs from your computer and restart your computer.
Click on the Start button , click the arrow next to the lock button , and then click restart.
2. do one of the following:
o If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.
o If your computer has multiple operating systems, use the arrow keys to select the operating system you want to start in safe mode and press F8.
3. in the display Advanced Startup Options , use the arrow keys to select the option of safe mode you want and press ENTER. For more information about the options, see Advanced startup options (including safe mode).
4 log your computer with a user account with administrator rights.
When your computer is in safe mode, you'll see the words Safe Mode in the corners of the screen. To leave safe mode, restart your computer and let Windows start normally.
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
If you are able to access the desktop in SafeMode I suggest you read the article in the link below for instructions on restoring the system.
http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
Concerning
Varun j: MICROSOFT SUPPORT
Visit our Microsoft answers feedback Forum
http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think.
-
Someone got my account without my permission and Ireport. Yousend me an Email, but I have already closed my account. Icannot get theSECURITE ALERT now sign off the screen.
Hello
Guessing that it is a question of Hotmail...
Browse through the categories of Solution here http://windowslivehelp.com/product.aspx?productid=1If you can't find an answer, ask the question in the Hotmail forum.
Don
-
my computer always go back to the sign on the screen every 2 minutes while I work. How can I avoid this?
Right-click on the desktop
Select Customize
In the lower right corner, select the screen saver
Change the wait time here or uncheck the box on the resumption, display the login screen.
-
Original title: I want to be able to have someone turn on my computer and not having to enter my password. How can I get rid of the sign in the screen while the computer just starts?
When I turn on my computer Windows 8 it requires me to enter my Hotmail password to access Windows. I want the computer just turn on and start unless I have my password.
He use all my children and I don't want to have my password by e-mail. When I go to Hotmail I can connect here.
Can anyone help?
Thank you
Gary
When I turn on my computer Windows 8 it requires me to enter my Hotmail password to access Windows. I want the computer just turn on and start unless I have my password.
If you connect with a Microsoft account then you must use a password.
All my children use it
EEEK! It's a recipe for disaster.
I assume that the one and the only user account on the computer is an administrator account?
If so, create a Local Administrator account with a password and keep it for elevation and only emergency access.
Change your account of the daily use of Admin Standard.Create a new Local Standard account for your children. (No password need it at all).
-
When I try to sign a document, the screen turns off and I do not see the document.
When I try to sign a document, the screen turns off and I do not see the document.
Hey jordic35730386,
Please try to uninstall and reinstall Adobe Reader here:
Adobe Acrobat Reader DC install for all versions
Let me know how it goes.
Kind regards
Ana Maria
-
Cannot, sign, only get a white screen, is there something wrong with the application?
[Duplicate message deleted... post the same question more than once is confusing... MOD]
[This is an open forum, not a direct line to Adobe support... you have to wait a response]
WHITE cloud screen http://forums.adobe.com/message/5484303 can help
- and step by step http://forums.adobe.com/thread/1440508?tstart=0
- and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html
-
signed apk file shows one header when it is run - the rest of the screen is blank
Hello
I have
- built a folio for Android app.
- published the folio
- DPS app generator used to build the application
- Terminal used to generate the key
- Use the DPS to sign the app
- I transferred the file to the device Android apk and installed - it installs fine
When the application opens what can be seen is the application icon in the top left corner of the screen and a menu tool, upper right corner for the settings and all
The screen where the application should be showing is completely black.
DPS App generator screen shows that the app is unsigned, as illustrated below.
The other thing that's weird, I think, is that the created apk file is large, 3.6 MB while the folio files are quite large and on the iPad, the app is 500 MB.
I guess I have three questions:
1. what Miss me the screen appears black on the Tablet?
2. why the DPS app Builder shows that the application is not signed.
3. shouldn't my apk file size matches the size of the folio?
Thanks for your help
Deb
Hello
Thank you
I read the article and all positions with her.
I will cancel my account Pro DPS now that I need to produce a stand-alone apps Android and Windows of my folios.
I found another company that supports this process.
Thanks for your help
Deb
Maybe you are looking for
-
Not put numbers at level with El Capitan
Have recently updated my ElCapitan worm 10.11.4 iMac desktop computer. The demand numbers remains to be the worm ' 09. When you use help Numbers ' 09, it refers to the characteristics that seem to apply to a newer version, which, after a search, is w
-
HP5610 All in One Printer and for some reason any fax does not work
* - Original title - the printer does not properly I have a HP5610 All in One Printer and for some reason any fax does not work. What could be the problem? I don't have the CD installation disc.
-
spacing of email staff signarture
I created a personal signature and in the email I create looks good, when I go to print a copy of my email, there are additional spaces between each line. \ How can I get rid of the extra spaces? Thank you. Bob Harvey
-
To turn off the Recycle Bin so that the files that you delete from your hard disks have gone permanently without having to empty the trash, what should you do? Original title: help
-
HP LaserJet P1006 - print mailing labels
I just got a new computer at work and it will not print my mailing labels. If I create a word document and print it, it will be printed on paper for labels, but if the document is a model of language, I get a pop-up that telling me to insert the cor