Real Application Cluster

Similar Questions

• scenario test Oracle real application cluster

  Hi all! I just finished real oracle application implemented for the customer. Now, I need to UAT to them with cases. Some of the cases I don't know if he can make the cluster fail, or need to repair, or sunk. I need to tell them what happens if something go wrong in the following cases:
  
  case 1. the storage database server connection is down in a node, or all nodes of the cluster.
  
  case 2. Private SqlConnection connection down
  
  case 3. public network down into another node or all nodes of the cluster.
  
  Please, help to resolve the situation and behavior of oracle rac, or suggest me a useful document about this case.
  
  I'll appreciate your help.
  
  Thank you

  Hello

  I hope this helps...
  >

  Kind regards

• failure of the preliminary checks for Oracle Real Application Cluster 12 C.

  Hi all. Please, help to investigate and resolve. Thank you.

  [grid@orac1 grid] $./runcluvfy.sh stage pre - crsinst - orac1, orac2 n - correction-verbose

  Conducting due diligence to install cluster services

  Audit accessibility of node...

  Check: Accessibility of node of the node 'orac1 '.

  Accessible destination node?

  ------------------------------------  ------------------------

  orac1                                 yes

  orac2                                 yes

  Result: Check accessibility node from node 'orac1 '.

  Verify the equivalence of the user...

  Check: Equivalence for the user "grid."

  Status of node name

  ------------------------------------  ------------------------

  orac2 spent

  orac1 spent

  Result: Use CONTROL passed to user equivalence "grid."

  Verify node connectivity...

  Checking the configuration of the hosts file...

  Status of node name

  ------------------------------------  ------------------------

  orac1 spent

  orac2 spent

  The hosts config file verification successful

  Interface of the node information to "orac1".

  Name address IP subnet gateway Gateway bat HW address MTU

  ------ --------------- --------------- --------------- --------------- ----------------- ------

  eth0 10.154.137.101 10.154.137.0 0.0.0.0 10.0.4.2 08:00:27:28:D1:1F 1500

  eth1 10.154.138.101 10.154.138.0 0.0.0.0 10.0.4.2 08:00:27:51:E8:B9 1500

  eth2 10.0.4.15 10.0.4.0 0.0.0.0 10.0.4.2 08:00:27:5 B: D7:29 1500

  Interface of the node information to "orac2".

  Name address IP subnet gateway Gateway bat HW address MTU

  ------ --------------- --------------- --------------- --------------- ----------------- ------

  eth0 10.154.137.102 10.154.137.0 0.0.0.0 10.0.4.2 08:00:27:7F:C8:70 1500

  eth1 10.154.138.102 10.154.138.0 0.0.0.0 10.0.4.2 08:00:27:9 D: 27:D8 1500

  eth2 10.0.4.15 10.0.4.0 0.0.0.0 10.0.4.2 08:00:27:6E:92:43 1500

  Check: Subnet node connectivity "10.154.137.0."

  Source Destination connected?

  ------------------------------  ------------------------------  ----------------

  orac1 [10.154.137.101] orac2 [10.154.137.102] Yes

  Result: Connectivity node passed to subnet "10.154.137.0" with one or more nodes orac1, orac2

  Check: The subnet '10.154.137.0' TCP connectivity

  Source Destination connected?

  ------------------------------  ------------------------------  ----------------

  orac1:10.154.137.101 orac2:10.154.137.102 failed

  ERROR:

  PRVF-7617: node connectivity between "orac1: 10.154.137.101" and "orac2: 10.154.137.102" failed

  Result: Check failed for the '10.154.137.0' subnet TCP connectivity

  Check: Subnet node connectivity "10.154.138.0."

  Source Destination connected?

  ------------------------------  ------------------------------  ----------------

  orac1 [10.154.138.101] orac2 [10.154.138.102] Yes

  Result: Connectivity node passed to subnet "10.154.138.0" with one or more nodes orac1, orac2

  Check: The subnet '10.154.138.0' TCP connectivity

  Source Destination connected?

  ------------------------------  ------------------------------  ----------------

  orac1:10.154.138.101 orac2:10.154.138.102 failed

  ERROR:

  PRVF-7617: node connectivity between "orac1: 10.154.138.101" and "orac2: 10.154.138.102" failed

  Result: Check failed for the '10.154.138.0' subnet TCP connectivity

  Check: Subnet node connectivity "10.0.4.0."

  Source Destination connected?

  ------------------------------  ------------------------------  ----------------

  orac1 [10.0.4.15] orac2 [10.0.4.15] Yes

  Result: Connectivity node passed to subnet "10.0.4.0" with one or more nodes orac1, orac2

  Check: The subnet '10.0.4.0' TCP connectivity

  Source Destination connected?

  ------------------------------  ------------------------------  ----------------

  orac1:10.0.4.15 orac2:10.0.4.15 failed

  ERROR:

  PRVF-7617: node connectivity between "orac1: 10.0.4.15" and "orac2: 10.0.4.15" failed

  Result: Check failed for the '10.0.4.0' subnet TCP connectivity

  Interfaces available on subnet "10.0.4.0" who are likely candidates for VIP are:

  orac1 eth2:10.0.4.15

  orac2 eth2:10.0.4.15

  CAUTION:

  Could not find an appropriate interface for the private interconnection range

  Checking consistency of subnet mask...

  Verification of consistency for the subnet mask for subnet "10.154.137.0."

  Verification of consistency for the subnet mask for subnet "10.154.138.0."

  Verification of consistency for the subnet mask for subnet "10.0.4.0."

  Verification of consistency for the last subnet mask.

  ERROR:

  GLWB-1172: the IP "10.0.4.15" is on more than one interface 'eth2, eth2' nodes 'orac2, orac1 '.

  Result: Check the node has no connectivity

  Checking for multicast communication...

  Verification of the subnet "10.154.137.0" for multicast with "224.0.0.251. multicast group communication

  GLWB-11138: Interface '10.154.137.101' on 'orac1' node is not able to communicate with interface '10.154.137.101' on 'orac1' node to the multicast group "224.0.0.251.

  GLWB-11138: Interface '10.154.137.101' on 'orac1' node is not able to communicate with interface '10.154.137.102' on 'orac2' node to the multicast group "224.0.0.251.

  GLWB-11138: Interface '10.154.137.102' on 'orac2' node is not able to communicate with interface '10.154.137.101' on 'orac1' node to the multicast group "224.0.0.251.

  GLWB-11138: Interface '10.154.137.102' on 'orac2' node is not able to communicate with interface '10.154.137.102' on 'orac2' node to the multicast group "224.0.0.251.

  Verification of the subnet "10.154.138.0" for multicast with "224.0.0.251. multicast group communication

  GLWB-11138: Interface '10.154.138.101' on 'orac1' node is not able to communicate with interface '10.154.138.101' on 'orac1' node to the multicast group "224.0.0.251.

  GLWB-11138: Interface '10.154.138.101' on 'orac1' node is not able to communicate with interface '10.154.138.102' on 'orac2' node to the multicast group "224.0.0.251.

  GLWB-11138: Interface '10.154.138.102' on 'orac2' node is not able to communicate with interface '10.154.138.101' on 'orac1' node to the multicast group "224.0.0.251.

  GLWB-11138: Interface '10.154.138.102' on 'orac2' node is not able to communicate with interface '10.154.138.102' on 'orac2' node to the multicast group "224.0.0.251.

  Verification of the subnet "10.0.4.0" for multicast with "224.0.0.251. multicast group communication

  GLWB-11138: Interface '10.0.4.15' on 'orac1' node is not able to communicate with interface '10.0.4.15' on 'orac1' node to the multicast group "224.0.0.251.

  GLWB-11138: Interface '10.0.4.15' on 'orac1' node is not able to communicate with interface '10.0.4.15' on 'orac2' node to the multicast group "224.0.0.251.

  GLWB-11138: Interface '10.0.4.15' on 'orac2' node is not able to communicate with interface '10.0.4.15' on 'orac1' node to the multicast group "224.0.0.251.

  GLWB-11138: Interface '10.0.4.15' on 'orac2' node is not able to communicate with interface '10.0.4.15' on 'orac2' node to the multicast group "224.0.0.251.

  Checking configuration ASMLib.

  Status of node name

  ------------------------------------  ------------------------

  orac1 spent

  orac2 spent

  Result: Check the configuration of ASMLib passed.

  Check: Total memory

  Requested State available node name

  ------------  ------------------------  ------------------------  ----------

  orac2 GB 5,714 (5991520,0 KB) increased from 4 GB (4194304,0 KB)

  orac1 GB 5,714 (5991520,0 KB) increased from 4 GB (4194304,0 KB)

  Result: The total past memory check

  Check: Available memory

  Requested State available node name

  ------------  ------------------------  ------------------------  ----------

  transmitted orac2 Go 5,2293 (5483324,0 KB) 50 MB (51200,0 KB)

  transmitted orac1 Go 5,1456 (5395600,0 KB) 50 MB (51200,0 KB)

  Result: Available past memory check

  Check: Swap space

  Requested State available node name

  ------------  ------------------------  ------------------------  ----------

  orac2 GB 6,125 (6422520,0 KB) from GB 5,714 (5991520,0 KB)

  orac1 GB 6,125 (6422520,0 KB) from GB 5,714 (5991520,0 KB)

  Result: Check the Swap space past

  Check: Disk space for "orac2: / usr, orac2: / var, orac2: / etc, orac2: / sbin, orac2: / tmp '.

  Path node name Mount point available requested State

  ----------------  ------------  ------------  ------------  ------------  ------------

  orac2/usr / 37,8398 GB GB 1,0635 spent

  orac2/var / 37,8398 GB GB 1,0635 spent

  orac2/etc / 37,8398 GB GB 1,0635 spent

  orac2/sbin / 37,8398 GB GB 1,0635 spent

  orac2/tmp / 37,8398 GB GB 1,0635 spent

  Result: Free past to check the disk space ' orac2: / usr, orac2: / var, orac2: / etc, orac2: / sbin, orac2: / tmp '.

  Check: Disk space for "orac1: / usr, orac1: / var, orac1: / etc, orac1: / sbin, orac1: / tmp '.

  Path node name Mount point available requested State

  ----------------  ------------  ------------  ------------  ------------  ------------

  orac1/usr / 32,4382 GB GB 1,0635 spent

  orac1/var / 32,4382 GB GB 1,0635 spent

  orac1/etc / 32,4382 GB GB 1,0635 spent

  orac1/sbin / 32,4382 GB GB 1,0635 spent

  orac1/tmp / 32,4382 GB GB 1,0635 spent

  Result: Free past to check the disk space ' orac1: / usr, orac1: / var, orac1: / etc, orac1: / sbin, orac1: / tmp '.

  Check: Existence of user for "grid".

  Name of State comment node

  ------------  ------------------------  ------------------------

  orac2 past exists (1100)

  orac1 past exists (1100)

  Check for multiple users with the value of the UID 1100

  Result: Check for multiple users with the value of the UID 1100 spent

  Result: Use existence CONTROL passed to 'grid '.

  Check: Existence of group 'oinstall '.

  Name of State comment node

  ------------  ------------------------  ------------------------

  orac2 passed exists

  orac1 passed exists

  Result: Existence of group check passed for "oinstall".

  Check: Existence of group for "dba".

  Name of State comment node

  ------------  ------------------------  ------------------------

  orac2 passed exists

  orac1 passed exists

  Result: Existence of group check passed for "dba".

  Check: the members of the user 'grid' group 'oinstall' [primary]

  Name of node user is group is user group primary status

  ----------------  ------------  ------------  ------------  ------------  ------------

  orac2 Yes Yes Yes Yes past

  orac1 Yes Yes Yes Yes past

  Result: Membership search for "grid" user in the group 'oinstall' [as Primary] spent

  Check: Membership of the user "grid" in a group 'dba '.

  Name of node user is group are users in a group situation

  ----------------  ------------  ------------  ------------  ----------------

  orac2 Yes Yes Yes past

  orac1 Yes Yes Yes past

  Result: Check for user "grid" in group membership 'dba' spent

  Tick: Run level

  Name of the node run status level required

  ------------  ------------------------  ------------------------  ----------

  orac2         5                         3,5                       passed

  orac1         5                         3,5                       passed

  Result: Run control the level of the past

  Check: Hard limits for "file descriptors open maximum".

  Node name Type requested State available

  ----------------  ------------  ------------  ------------  ----------------

  4096, 65536 failed hard orac2

  4096, 65536 failed hard orac1

  Result: Hard limits check failed for 'file descriptors open maximum.

  Check: Limits Soft for "file descriptors open maximum".

  Node name Type requested State available

  ----------------  ------------  ------------  ------------  ----------------

  1024 1024 soft orac2 spent

  sweet orac1 4096 1024 spent

  Result: Soft limits check passed for "file descriptors open maximum".

  Check: Hard limits for "maximum user processes.

  Node name Type requested State available

  ----------------  ------------  ------------  ------------  ----------------

  46654 16384 hard orac2 spent

  46654 16384 hard orac1 spent

  Result: Verification of limits hard to last for "maximum user process.

  Check: Limits Soft for "maximum user process.

  Node name Type requested State available

  ----------------  ------------  ------------  ------------  ----------------

  orac2 1024-2047 soft failed

  orac1 1024-2047 soft failed

  Result: Limits Soft check failed for 'maximum process of the user.

  Control: System Architecture

  Requested State available node name

  ------------  ------------------------  ------------------------  ----------

  orac2 x86_64 x86_64 spent

  orac1 x86_64 x86_64 spent

  Result: Verification of the system architecture past

  Control: Kernel Version

  Requested State available node name

  ------------  ------------------------  ------------------------  ----------

  orac2-2.6.32 - 279.el6.x86_64 2.6.32 spent

  orac1-2.6.32 - 279.el6.x86_64 2.6.32 spent

  Result: Last kernel version control

  Check: Parameter of kernel for 'semmsl.

  Current name configured node comment of the requested State

  ----------------  ------------  ------------  ------------  ------------  ------------

  orac1 250 250 250 spent

  orac2 250 250 250 spent

  Result: Check of kernel parameter passed to "semmsl.

  Check: Parameter of kernel for 'semmns.

  Current name configured node comment of the requested State

  ----------------  ------------  ------------  ------------  ------------  ------------

  32000 32000 32000 orac1 spent

  32000 32000 32000 orac2 spent

  Result: Check kernel parameter passed to "semmns.

  Check: Parameter of kernel for 'semopm.

  Current name configured node comment of the requested State

  ----------------  ------------  ------------  ------------  ------------  ------------

  orac1 100 100 100 spent

  orac2 100 100 100 spent

  Result: Check kernel parameter passed to "semopm.

  Check: Parameter of kernel for 'semmni.

  Current name configured node comment of the requested State

  ----------------  ------------  ------------  ------------  ------------  ------------

  orac1 128 128 128 spent

  orac2 128 128 128 spent

  Result: Check of kernel parameter passed to "semmni.

  Check: "Package" kernel parameter

  Current name configured node comment of the requested State

  ----------------  ------------  ------------  ------------  ------------  ------------

  4398046511104 4398046511104 3067658240 orac1 spent

  4398046511104 4398046511104 3067658240 orac2 spent

  Result: Check of kernel parameter passed to 'package '.

  Check: Parameter of kernel for "shmmni(5)."

  Current name configured node comment of the requested State

  ----------------  ------------  ------------  ------------  ------------  ------------

  4096-4096-4096 orac1 spent

  4096-4096-4096 orac2 spent

  Result: Check of kernel parameter passed to 'shmmni(5) '.

  Check: "Shmall" kernel parameter

  Current name configured node comment of the requested State

  ----------------  ------------  ------------  ------------  ------------  ------------

  4294967296 4294967296 599152 orac1 spent

  4294967296 4294967296 599152 orac2 spent

  Result: Check kernel parameter passed to "shmall.

  Check: Parameter of kernel "file-max.

  Current name configured node comment of the requested State

  ----------------  ------------  ------------  ------------  ------------  ------------

  6815744 6815744 6815744 orac1 spent

  6815744 6815744 6815744 orac2 spent

  Result: Check of kernel parameter passed to 'file-max.

  Check: "Ip_local_port_range" kernel parameter

  Current name configured node comment of the requested State

  ----------------  ------------  ------------  ------------  ------------  ------------

  orac1 between 9000 & 65500 between 9000 & 65500 between 9000 & 65535 passed

  orac2 between 9000 & 65500 between 9000 & 65500 between 9000 & 65535 passed

  Result: Check of kernel parameter passed to «ip_local_port_range»

  Check: Parameter of kernel for "rmem_default."

  Current name configured node comment of the requested State

  ----------------  ------------  ------------  ------------  ------------  ------------

  262144 262144 262144 orac1 spent

  262144 262144 262144 orac2 spent

  Result: Check of kernel parameter passed to 'rmem_default '.

  Check: "Rmem_max" kernel parameter

  Current name configured node comment of the requested State

  ----------------  ------------  ------------  ------------  ------------  ------------

  4194304 4194304 4194304 orac1 spent

  4194304 4194304 4194304 orac2 spent

  Result: Check of kernel parameter passed to «rmem_max»

  Check: Parameter of kernel for "wmem_default."

  Current name configured node comment of the requested State

  ----------------  ------------  ------------  ------------  ------------  ------------

  262144 262144 262144 orac1 spent

  262144 262144 262144 orac2 spent

  Result: Check of kernel parameter passed to 'wmem_default '.

  Check: "Wmem_max" kernel parameter

  Current name configured node comment of the requested State

  ----------------  ------------  ------------  ------------  ------------  ------------

  1048576 1048576 1048576 orac1 spent

  1048576 1048576 1048576 orac2 spent

  Result: Check kernel parameter passed to "wmem_max.

  Check: Parameter of kernel for "aio-max-nr.

  Current name configured node comment of the requested State

  ----------------  ------------  ------------  ------------  ------------  ------------

  1048576 1048576 1048576 orac1 spent

  1048576 1048576 1048576 orac2 spent

  Result: Check of kernel parameter passed to "aio-max-nr.

  Check: Existence of package for "binutils".

  Requested State available node name

  ------------  ------------------------  ------------------------  ----------

  binutils - 2.20.51.0.2 - 5.34.el6 orac2 binutils - 2.20.51.0.2 spent

  binutils - 2.20.51.0.2 - 5.34.el6 orac1 binutils - 2.20.51.0.2 spent

  Result: Package of checking for "binutils".

  Check: Existence of package for "compat-libcap1.

  Requested State available node name

  ------------  ------------------------  ------------------------  ----------

  orac2 compat-libcap1 - 1.10 - 1 compat-libcap1 - 1.10 spent

  orac1 compat-libcap1 - 1.10 - 1 compat-libcap1 - 1.10 spent

  Result: Package of checking for "compat-libcap1.

  Control: Existence of package for "compat-libstdc ++-33 (x86_64).

  Requested State available node name

  ------------  ------------------------  ------------------------  ----------

  orac2 compat-libstdc ++ - 33 (x86_64) - 3.2.3 - 69.el6 compat-libstdc ++ - 33 (x86_64) - 3.2.3 spent

  orac1 compat-libstdc ++ - 33 (x86_64) - 3.2.3 - 69.el6 compat-libstdc ++ - 33 (x86_64) - 3.2.3 spent

  Result: Package of checking for "compat-libstdc ++-33 (x86_64).

  Control: Existence of package for 'libgcc (x86_64).

  Requested State available node name

  ------------  ------------------------  ------------------------  ----------

  orac2 libgcc (x86_64) - 4.4.7 - 11.el6 libgcc (x86_64) - 4.4.4 spent

  orac1 libgcc (x86_64) - 4.4.7 - 11.el6 libgcc (x86_64) - 4.4.4 spent

  Result: Package of checking for 'libgcc (x86_64).

  Control: Existence of package for 'libstdc ++ (x86_64).

  Requested State available node name

  ------------  ------------------------  ------------------------  ----------

  orac2 libstdc ++ (x86_64) - 4.4.7 - 11.el6 libstdc ++ (x86_64) - 4.4.4 spent

  orac1 libstdc ++ (x86_64) - 4.4.7 - 11.el6 libstdc ++ (x86_64) - 4.4.4 spent

  Result: Package of checking for 'libstdc ++ (x86_64).

  Control: Existence of package for 'libstdc ++ - devel (x86_64).

  Requested State available node name

  ------------  ------------------------  ------------------------  ----------

  orac2 libstdc ++ - devel (x86_64) - 4.4.7 - 11.el6 libstdc ++ - devel (x86_64) - 4.4.4 spent

  orac1 libstdc ++ - devel (x86_64) - 4.4.7 - 11.el6 libstdc ++ - devel (x86_64) - 4.4.4 spent

  Result: Package of checking for 'libstdc ++ - devel (x86_64).

  Check: Existence of package for "sysstat".

  Requested State available node name

  ------------  ------------------------  ------------------------  ----------

  sysstat - 9.0.4 - sysstat - 9.0.4 spent 20.el6 orac2

  sysstat - 9.0.4 - sysstat - 9.0.4 spent 20.el6 orac1

  Result: Package of checking for "sysstat".

  Check: Existence of package for 'gcc '.

  Requested State available node name

  ------------  ------------------------  ------------------------  ----------

  4.4.7 - gcc - 11.el6 orac2 gcc - 4.4.4 spent

  4.4.7 - gcc - 11.el6 orac1 gcc - 4.4.4 spent

  Result: Package of checking for "gcc".

  Check: Package of existence 'gcc - c++.

  Requested State available node name

  ------------  ------------------------  ------------------------  ----------

  orac2 gcc - c++ - 4.4.7 - 11.el6 gcc - c++ - 4.4.4 spent

  orac1 gcc - c++ - 4.4.7 - 11.el6 gcc - c++ - 4.4.4 spent

  Result: Package of checking for "gcc - c++.

  Check: Existence of package for 'ksh '.

  Requested State available node name

  ------------  ------------------------  ------------------------  ----------

  ksh-20120801 - 21.el6.1 orac2 spent ksh...

  ksh-20120801 - 21.el6.1 orac1 spent ksh...

  Result: Package of checking for "ksh".

  Check: Existence of package to 'make it '.

  Requested State available node name

  ------------  ------------------------  ------------------------  ----------

  make orac2 make - 3.81 - 20.el6 - 3.81 spent

  make orac1 make - 3.81 - 20.el6 - 3.81 spent

  Result: Package of verification of existence moved to 'make it '.

  Control: Existence of package for 'glibc (x86_64).

  Requested State available node name

  ------------  ------------------------  ------------------------  ----------

  orac2 glibc (x86_64)-2, 12 - 1.149.el6 glibc (x86_64)-2,12 spent

  orac1 glibc (x86_64)-2, 12 - 1.149.el6 glibc (x86_64)-2,12 spent

  Result: Package of checking for "glibc (x86_64).

  Control: Existence of package for 'glibc-devel (x86_64).

  Requested State available node name

  ------------  ------------------------  ------------------------  ----------

  orac2 glibc-devel (x86_64)-2, 12 - 1.149.el6 glibc-devel (x86_64)-2,12 spent

  orac1 glibc-devel (x86_64)-2, 12 - 1.149.el6 glibc-devel (x86_64)-2,12 spent

  Result: Package of checking for "glibc-devel (x86_64).

  Control: Existence of package for "libaio (x86_64).

  Requested State available node name

  ------------  ------------------------  ------------------------  ----------

  orac2 (x86_64) - 0.3.107 - 10.el6 libaio libaio (x86_64) - 0.3.107 spent

  orac1 (x86_64) - 0.3.107 - 10.el6 libaio libaio (x86_64) - 0.3.107 spent

  Result: Package of checking for "libaio (x86_64).

  Control: Existence of package for "libaio-devel (x86_64).

  Requested State available node name

  ------------  ------------------------  ------------------------  ----------

  orac2 libaio-devel (x86_64) - 0.3.107 - 10.el6 libaio-devel (x86_64) - 0.3.107 spent

  orac1 libaio-devel (x86_64) - 0.3.107 - 10.el6 libaio-devel (x86_64) - 0.3.107 spent

  Result: Package of checking for "libaio-devel (x86_64).

  Check: Existence of package for 'nfs-utils '.

  Requested State available node name

  ------------  ------------------------  ------------------------  ----------

  orac2 nfs-utils - 1.2.3 - 26.el6 nfs-utils - 1.2.3 - 15 past

  orac1 nfs-utils - 1.2.3 - 26.el6 nfs-utils - 1.2.3 - 15 past

  Result: Package of checking for 'nfs-utils '.

  Check the availability of the "6200,6100" ports required for the component 'Oracle Notification Service (ONS)'

  Name of the node Port number protocol status available

  ----------------  ------------  ------------  ------------  ----------------

  orac2 6200 TCP successful Yes

  orac1 6200 TCP successful Yes

  orac2 6100 TCP successful Yes

  orac1 6100 TCP successful Yes

  Result: Availability of Port Control passed to ports '6200,6100 '.

  Check for multiple users with the value of the UID 0

  Result: Check for multiple users with the value of the UID 0 past

  Check: The current group ID

  Result: Control of current past group ID

  Check the consistency of the main group of the root user from

  Status of node name

  ------------------------------------  ------------------------

  orac2 spent

  orac1 spent

  Check the consistency of the primary group of the user root past

  Starting synchronization check by using the Network Time Protocol (NTP)...

  Of NTP Configuration file check has started...

  The NTP configuration file "/ etc/ntp.conf" is available on all nodes

  Of NTP Configuration file check passed

  Checking delay of the devil...

  Check: Time for 'ntpd '.

  Node name race?

  ------------------------------------  ------------------------

  orac2                                 yes

  orac1                                 yes

  Result: Check time-out for 'ntpd '.

  Check for NTP daemon or service life spent on all nodes

  Check if NTP daemon or service using the 123 UDP port on all nodes

  Search the NTP daemon or service uses the port UDP 123

  Name of the node Port open?

  ------------------------------------  ------------------------

  orac2                                 yes

  orac1                                 yes

  Common NTP Time Server checks began...

  Time server NTP "193.27.209.1" is common to all nodes on which runs the NTP daemon

  Time server NTP "194.29.130.252" is common to all nodes on which runs the NTP daemon

  Registration of time server common NTP spent

  The clock offset record time server NTP began...

  Audit on the nodes '[orac2, orac1] "...

  Check: The Offset of the time clock to the time server NTP

  Time server: 193.27.209.1

  Time limit offset: 1000,0 ms

  Name of node time shift status

  ------------  ------------------------  ------------------------

  orac2 - 355.25 spent

  orac1 - 124.19 spent

  Time server "193.27.209.1" has time shifts that are within acceptable limits for the nodes "[orac2, orac1].

  Time server: 194.29.130.252

  Time limit offset: 1000,0 ms

  Name of node time shift status

  ------------  ------------------------  ------------------------

  orac2 - 358.87 spent

  orac1 - 109.63 spent

  Time server "194.29.130.252" has time shifts that are within acceptable limits for the nodes "[orac2, orac1].

  The clock offset check past

  Result: Control of synchronization using Network Time Protocol (NTP) spent

  Base file name consistency check model...

  Check the consistency of spent Core file name pattern.

  Check to make sure that the user "grid" is not in the group "root".

  Name of State comment node

  ------------  ------------------------  ------------------------

  There is no such thing as orac2 spent

  There is no such thing as orac1 spent

  Result: User "grid" is not part of the "root" group Check the past

  Audit default user file creation mask

  Name of node available comment required

  ------------  ------------------------  ------------------------  ----------

  0022-0022 orac2 spent

  0022-0022 orac1 spent

  Result: Mask by default user file creation passed Verification

  Checking the integrity of the file "/ /etc/resolv.conf ' overall of nodes

  Check the file "/ /etc/resolv.conf" to ensure that the only area and search for entries is defined

  CAUTION:

  PRVF-5640: both search and domain entries are present in the file ' / /etc/resolv.conf ' on the following nodes: orac1, orac2

  Checking if entry field in the file ' / /etc/resolv.conf ' is constant in knots...

  Check the file "/ /etc/resolv.conf ' to ensure that single domain entry is defined

  There is no more than a 'domain' entry in any ' / /etc/resolv.conf ' file

  All nodes have the same 'domain' entry defined in the file "/ /etc/resolv.conf.

  If control search entry in the file "/ /etc/resolv.conf ' is constant in knots...

  Check the file "/ /etc/resolv.conf ' to ensure that research that one entry is defined

  Several topics 'research' does not exist in any ' / /etc/resolv.conf ' file

  All nodes have the same order of 'search' defined in the file "/ /etc/resolv.conf.

  Checking the time of DNS response for an unreachable node

  Status of node name

  ------------------------------------  ------------------------

  orac1 spent

  orac2 spent

  The time of DNS response for an unreachable node is consistent with the acceptable limit on all nodes

  Check the integrity of the file "/ /etc/resolv.conf ' past

  Check: consistency of zone

  Result: the zone past consistency check

  Verifying the integrity of the name service switch configuration file ' / /etc/nsswitch.conf '...

  Check if "hosts" entry in the file "/ /etc/nsswitch.conf" is consistent in all nodes...

  Check the file "/ /etc/nsswitch.conf" to ensure that the single entry "hosts" is set

  More of an entry "hosts" does not none "/ /etc/nsswitch.conf ' file

  All nodes have even entered 'hosts' defined in the file "/ /etc/nsswitch.conf.

  Check the integrity of the name service switch configuration file ' / /etc/nsswitch.conf ' past

  Control the demon "avahi-daemon" is not configured and running

  Check: Daemon "avahi-daemon' not configured

  Name of the configured node status

  ------------  ------------------------  ------------------------

  orac2 Yes failed

  orac1 Yes failed

  Demon not configured has no process "avahi-daemon."

  Check: Daemon "avahi-daemon" does not

  Node name race?                  Status

  ------------  ------------------------  ------------------------

  orac2 Yes failed

  orac1 Yes failed

  Demon of the control does not have to process "avahi-daemon" works not

  From check for/dev/SHM mounted as a temporary file system...

  Check for/dev/shm mounted as a temporary last file system

  ******************************************************************************************

  Here is a list of pre-requisites fixable chose to fix at this session

  ******************************************************************************************

  --------------                ---------------     ----------------

  Check has failed.                 Failed on nodes of reboot needed?

  --------------                ---------------     ----------------

  Limit: maximum orac2 opened, orac1 not

  file descriptors

  The soft limit: maximum user orac2, orac1 not

  process

  Demon 'avahi-daemon' not orac2, orac1 not

  configured and running

  Run "/ tmp/CVU_12.1.0.1.0_grid/runfixup.sh" as root user on the nodes 'orac1, orac2' to perform correcting operations manually

  Press the ENTER key to continue after execution of ' / tmp/CVU_12.1.0.1.0_grid/runfixup.sh ' has finished on the nodes 'orac1, orac2 '.

  FIX: Strict limit: file descriptors open maximum

  Status of node name

  ------------------------------------  ------------------------

  orac2 failed

  orac1 failed

  ERROR:

  GLWB-9023: manual fixed command "/ tmp/CVU_12.1.0.1.0_grid/runfixup.sh" has been issued by the superuser on the node 'orac2 '.

  GLWB-9023: manual fixed command "/ tmp/CVU_12.1.0.1.0_grid/runfixup.sh" has been issued by the superuser on the node 'orac1 '.

  Result: "strict limit: file descriptors open maximum" could be fixed on nodes 'orac2, orac1 '.

  FIX: Soft limit: maximum user process

  Status of node name

  ------------------------------------  ------------------------

  orac2 failed

  orac1 failed

  ERROR:

  GLWB-9023: manual fixed command "/ tmp/CVU_12.1.0.1.0_grid/runfixup.sh" has been issued by the superuser on the node 'orac2 '.

  GLWB-9023: manual fixed command "/ tmp/CVU_12.1.0.1.0_grid/runfixup.sh" has been issued by the superuser on the node 'orac1 '.

  Result: "soft limit: maximum user process" could be fixed on nodes 'orac2, orac1 '.

  FIX: Daemon "avahi-daemon' not configured and running

  Status of node name

  ------------------------------------  ------------------------

  orac2 failed

  orac1 failed

  ERROR:

  GLWB-9023: manual fixed command "/ tmp/CVU_12.1.0.1.0_grid/runfixup.sh" has been issued by the superuser on the node 'orac2 '.

  GLWB-9023: manual fixed command "/ tmp/CVU_12.1.0.1.0_grid/runfixup.sh" has been issued by the superuser on the node 'orac1 '.

  Result: "Demon"avahi-daemon' not configured and running"could not set on the nodes 'orac2, orac1 '.

  Difficult operations for some prerequisites fixable failed nodes 'orac2, orac1 '.

  Check prior to the installation of cluster service failed on all nodes.

  SOLVED!

  The root cause was in iptables service works.

  Just forgot to arrest him and take off chkconfig!

  Issue can be closed.

• Could not see HFM 11.1.2.4 Application Cluster when creating Application

  Hello

  I installed EMP and HFM 11.1.2.4 on linux 5.8.

  When I try to create some application I see not the name of the cluster that I add when HFM configuration, configure the application cluster.

  I met the same problem in exalytics but I solved it by removing the Cluster of HFM name space during the configuration.

  
  

  I am also faced with ADF problems on linux 5.8 not on exalytics. I'm getting ADF errors when I try to open and HFM/page tabs in the administration of the consolidation. Reopening this page decided that the error.

  
  

  I checked in my exalytics that I see 2 entries in my TNSNAME. ORA file is located at $user_projects/config/dbclient/tnsname.ora

  Entries are HFMTNS and AIF_ORCL
  

  I checked in my linux 5.8 machine that there is no entry in the tnsname.ora file.

  
  

  Concerning
  

  You can go with the links below

  (1) the guy Finnish Hyperion: HFM 11.1.2.4 running on Linux products

  2) http://www.slideshare.net/alooa2/hyperion-11123installationguideonlinux

  Thank you

  Pratik

• HFM Application Cluster Configuration - failed

  Hello
  
  I use the EPM 11.1.1.3 System. The Oracle database version is 10g. When I tried to reconfigure HFM Application cluster via the EMP Configurator, I get error below. I just added the name of the HFM server to the cluster and click Next. Please could you help on this issue.
  
  Error Msg in the log file:
  The server name duplicated SERVERNAME line: 1062 file:.\CHFMConfig.cpp error code: 0 x 0 error: the operation completed successfully.
  The user has been properly set up DCOM limitations
  Try to configure the cluster server.
  Cannot set the application servers and Clusters. Line: 515 file:.\CHFMConfigUtil.cpp Error code: 0x8004082a error: #1578 IDispatch error
  General error. Line: 827 file:.\CHFMConfigUtil.cpp Error code: 0 x 80040815 error: error IDispatch #1557
  
  Thank you
  Michel K

  I removed the name of server in doubles in the HFM_Config.xml file and solved the problem.

  Thank you

• Real Application testing from 10g to 11g

  Is it possible to do the real application testing of database 10 g to 11g database? How can do us?

  I had little trouble. You can capture the workload also in 10.2.0.3. Please follow the link.

  http://www.Oracle.com/technetwork/database/manageability/MetaLink-real-application-testing-f-132358.PDF

• Oracle Real Application Testing

  I capture a 10.2.0.5 RAC workload and try to play again on a RAC 11.2.0.3. All the Docs describe going from a stand-alone node RAC and all steps to do. However, I can't find anything describing the JAR to the CARS process.
  
  Any help would be appreciated.
  Thank you

  user12006502 wrote:
  I capture a 10.2.0.5 RAC workload and try to play again on a RAC 11.2.0.3. All the Docs describe going from a stand-alone node RAC and all steps to do. However, I can't find anything describing the JAR to the CARS process.

  Any help would be appreciated.
  Thank you

  It's there, you just need to look around for it (and probably do some reading).

  Things like
  http://docs.Oracle.com/CD/E11882_01/server.112/e16540/dbr_capture.htm#CACICAAC
  "
  Capture the workload that only one can be carried out at any time. If you have an Oracle Real Application Clusters (Oracle RAC) configuration, workload capture is performed for all of the database. To allow a clean state before you begin to capture the workload, all instances must be restarted.
  "

  and

  http://docs.Oracle.com/CD/E11882_01/server.112/e16540/dbr_replay.htm#CHDBCADJ
  "
  For Oracle Real Application Clusters (Oracle RAC) databases, you can map all the connection strings to a load balancer connection string. This is particularly useful if the number of nodes on the Replay system is different from the capture system. Alternatively, if you want to run the workload to specific instances, you can use the services or explicitly specify the instance identifier in remapped connection strings.
  "

  See you soon,.

• EBS on Real Application Clusters running

  Is there than a practice paper for the establishment of EBS on CARS?
  
  Thank you

  Hello

  Please refer to these docs.

  Oracle E-Business Suite and Oracle Real Application Clusters Documentation Roadmap [ID 745759.1]
  Oracle E-Business Suite Release 11i high availability Documentation Roadmap [ID 1072807.1]
  Oracle E - Business Suite Release 12 high availability Documentation Roadmap [ID 1072636.1]

  Thank you
  Hussein

• ORA-00439: feature not enabled: Real Application Clusters

  Hi friends,
  I installed Oracle 10 g server on my PC without RAC configuration. To enable archiving only after a command, I have published.
  
  "Alter system set Cluster_Database = True Scope = spfile"
  
  It was working well but when I tried to start the database by using connect as sysdba and "statup" command it gives following error.
  
  "ORA-00439: feature not enabled no: Real Application Clusters.
  
  Please help me on this issue.

  CLUSTER_DATABASE parameter is not bound to the Archives of the newspapers (assuming that's what you mean by 'activate archiving'). So I don't know why you set this in the first place.

  Given that the CAR is not installed and CLUSTER_DATABASE required by CARS, the error you are getting is not surprising. You'll want to change the parameter to false.

  Justin

• I have an active cloud adobe account and wish to download the app download on my iMac. I can't download a real applications. Blocked in the initial Setup screen. At best, I was able to finish the 20%.

  How to download my first application on a new iMac. currently have 3 other iMacs using the cloud to adobe. NOTE that I am connected to my account and attempt to download.

  Empty your temp folder, restart your computer and then try to install your programs of cc.

• Oracle Utilities active work and management (WAM) - application Cluster vs Non Clutered

  I installed WAM on a three-node cluster, with a footstool of Server WebLogic Administration Console on the node 1, but WLS_FORMS managed server on node 1, 2 and 3. I need to break 3 node in the cluster, as the company needs to use it for testing idepentantly. I have already built a new instance of WAM database for this, but I don't know how to break 3 node in the cluster and run with its own Web Server Admin logic.

  Does anyone have any advice or learn more about me.

  Thanks in advance

  Hello

  Of after your description it seems that it is only a single domain configured which has wls_forms tuned to 3 knots.

  In this case, you can't break wls_forms on node3 to have its own server admin.

  My suggestion is to stop wls_forms on node3 and configure a new area dedicated to node 3 with an administrator of the server and the managed Forms Server.

  Thank you

  Sharmela

• Real Application Clusters configuration

  Hello world
  
  How to create a database with RAC?
  
  I have work experience in oracle 9i, but I am trying to create a database with RAC. Can someone give me the steps to do so.
  
  
  Thank you

  You already have a RAC cluster set up for you? Because you need to create a RAC database. I would say that, like others to begin with the docs. To create the db, all you need is run DBCA which can create a stand-alone database and a RAC database as well.

  HTH
  Aman...

• Differences between Oracle Real Application Clusters 11 g 1 material and GR 11, 2

  Hi Experts,

  Please give me the differences between RAC Oracle 11 GR 1 material and GR 11, 2.

  Thanks in advance,

  Kalashnikoff.

  From GR 11 1 11 GR 2 material, there is not much on the side of the data base which is different with respect to Oracle RAC. Which means that anything like that again for a server Oracle 11 g RAC 2 is too new for an Oracle 11 GR one-time 2 server.

  On the side of the grid Infrastructure, the biggest difference is the introduction of the listener SCAN.

  See you soon,.

  Brian

• Real application testing

  Hello!
  
  Is it possible to reread in oracle 10G, the workload on the same version 10G
  I'm usung 10.2.0.5
  
  Thank you and best regards,
  Pavel

  Pavel wrote:
  Hello!

  Is it possible to reread in oracle 10G, the workload on the same version 10G
  I'm usung 10.2.0.5

  Pavel,

  The answer to this would be a step becaue the RAT tool, is it only 11.1 from. So you can replay the workload of another host running at 11.1 and change, you would use a box of test running with 10 g. I don't think that any group of patches makes this tool available in the version back who is there for a newer version, as in your case 11.1.

  HTH
  Aman...

• Data Guard & Real Application Clusters

  Hello, I have a problem with my configuration of data protection. I'm setting up data guard in a RAC
  but I don'n know configured how do it again by sending to the standby database.
  I would like to than all the documentation on the subject.
  Thank you.

  Here are some links:

  http://www.Oracle.com/technology/deploy/availability/PDF/MAA_WP_10g_RACPrimaryRACPhysicalStandby.PDF
  http://www.Oracle.com/technology/deploy/availability/PDF/MAA_WP_10g_RACPrimarySingleInstancePhysicalStandby.PDF

  And of course, there is the Manual:

  http://download.Oracle.com/docs/CD/E11882_01/server.112/e10700/TOC.htm

  See Chapter 3 and annexes D and F.

  Larry