Real-time error checking

Similar Questions

• Liaison GPIB CVI 2009 real-time error

  The code of source GPIB only call the ibdev function.

  ibdev (0, 1, NO_SAD, T10s, 1, 0);

  When I tried to compile the code source GPIB CVI 2009 real-time, I received the error message following link.

  Project link error:

  Symbol not defined "__imp__GetCurrentProcess@0" referenced in "c:\program NIUninstaller instruments cvi2009\cvi2009\bin\msvc\cvistart.lib '...

  But the GPIB source code can be compiled and run under windows XP.

  Any help out there?

  Thank you.

  Vincent,

  Hello.  First of all, I wanted to mention that the NI GPIB library is not officially supported on systems time real LabWindows/CVI.  Your customers use it more in the earlier applications of CVI RT?  Can you tell me what features they use?

  While the NI GPIB library is not officially supported in CVI RT, errors of link that you see in CVI 2009 were not intentional.  You can tell your customer to copy the file gpib.lib to the location of the CVI 9.0:

  \National Instruments\\bin\msvc\gpib.lib

  the location of CVI 2009:

  \National Instruments\\bin\msvc\gpib.lib

  This should fix the problem.

  If your client has never repair or reinstall their installation of CVI 2009, they will have to make this change again.

  We intend to fix this in the next version of LabWindows/CVI.

  -Jeff

  NEITHER

• FPGA FIFO real-time error-61206

  I used this white paper as a base for my code. My FPGA look like:

  

  And my time real-time (RT):

  

  I am using a cRIO-9022 and now just trying to get the foundations buried for my project. The problem is that the side FPGA works well but environmental RT takes maybe 2 or 3 seconds and close with this error:

  Code:-61206

  Source: Read/write in FIFO_pressure_RT.vi control

  I have not dealt with the FIFOs in LabView before I have no idea what is the cause. Any ideas?

  Thank you

  Logan

  What version of LabVIEW are you using? In LabVIEW 2011, if orders or the lights on the front of the FPGA had a jump of line or transport back in the label, the question would be filling in the read/write control node, but you would see this error. It seems that Input Data (synchronous display) probably has a newline character that could cause this. That the problem has been solved in LabVIEW 2011 SP1, but what happens if you remove the line break and recompile the FPGA VI?

• Get strange errors 'real time' in the browser console, what do mean?

  I noticed recently that since yesterday is the day prior to that, I get a strange 'real-time' error messages in my browser console log. I get them for more or less the same sites, and I have attached a screenshot of some of the most common mistakes for example. I see these errors very frequently in the browser console log.

  So I'm a little worried about what mean these errors, why I want to come and if anything, what to do about them.

  Hello

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox does not work, you can start Firefox in Mode safe as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• I am unable to run the tool on the properties of the error checking c drive

  I am running Windows XP and can not get my disk c run time error check tool. Still, he said that Windows needs exclusivity to the files. He wants to check on reboot, I say yes to that, and then to restart it does not run the check. Thanks for your help.

  Hello

  Why do you want to run the disk check?

  Try the recovery console disc check and check.

  Reference:
  How to install and use the Recovery Console in Windows XP
  http://support.Microsoft.com/kb/307654
  Chkdsk
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/bootcons_chkdsk.mspx?mfr=true
  Chkdsk
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/chkdsk.mspx?mfr=true

• Do we need the intermediate database if a single execution in real-time duplicate controls with the connector for Siebel Disqualification?

  Still confused:

  Do we need a staging database? We want only to perform real-time duplicate checks.

  Documentation (Guide to integration of Siebel, Oracle® Enterprise Data quality customer Data Service Pack, Version 9.0, April 2013) is not quite clear about this:

  "The staging database is used by the Siebel connector as a staging area for the transfer of data between Siebel and Disqualification when running batch through Data Quality Manager of Siebel." (p. 19)
  

  "The interface in real time of the Disqualification is also used for the batch cleaning tasks (normalization): Siebel sends each record selected for treatment to the Disqualification by batch cleaning web services." (p. 6)
  

  «Double the lot identification and quality of data health check jobs (either full or incremental batch) use interface batch Disqualification.» In this case, the candidate registers for correspondence or health checkups are written to the database shared staging, Disqualification executes a batch on these records and - if pairing - rewritten matches, Siebel picks up and uses to link together the records. "(p. 6)

  
  

  However, for a design it is necessary to plan in advance, if a database is required or not.

  Any suggestions?

  Hello

  The staging database is used only for temporary storage where the interface between Siebel and Disqualification batch is used. It is not necessary at all if only using the interface in real time. Note that some of the 'batch' in Siebel tasks actually use the interface in real time - this applies to all data in batch cleaning jobs in Siebel and also for the workflow "UCM lot" which is in fact orchestrated by calling web services Disqualification.

  In general, the batch interface is only used where Disqualification is attached to Siebel CRM (instead of UCM). Because DQ Siebel lots do not call survival (so that you can only link to potential duplicates together).

  Note that the tables key used for the selection of the candidates belong to the Siebel database in the form of standard tables (S_DQ_CON_KEY and S_DQ_ACC_KEY). They are not in the database shared staging. The staging database is used ONLY for the data transfer for treatment in batches. It seems that you are not intending to use this interface.

  Also note that Disqualification still needs its own repository database, but if you use only a Disqualification in real-time (and not, for example, by using a Disqualification to batch migrate data in Siebel using the interface of the EIM), it should probably not push the database this hard.

  Kind regards

  Mike

• Error-307650 during a sequence in real-time with API LV

  I created a basic real-time sequence that checks the time it takes a signal reach a certain threshold.

  

  On the side of the LV, I use the API to call this sequence. I make sure that all channels and settings are defined as in the examples. However I get 307650 error that says "NEITHER VeriStand: Index was out of range." Must be non-negative and less than the size of the collection.

  ' Parameter name: index.

  Any suggestion to help here? THX. Code is attached.

  There are two problems here:

  1. The Stimulus profile editor is not indicating that there is an error with this sequence, although there is a. Note that the variable InitialTime is used in an expression, but is not declared as a parameter or a local variable.

  2. you get an error at runtime because of it, but it's not terribly useful (index out of range).

  You can fix this by adding a local variable of InitialTime to your sequence. I dropped the CAR 338386 about this bug.

  Once you do this, there is something extra, you will need to set in your VI which runs the sequence so he could get the results of the sequence properly. You use correctly the value of the sequence name to read the back of the sequence Variable. You use the Session name used during the deployment of the sequence. Which does not match the name sequence.

  To get the name of the sequence, use VI to get all the names sequence on your session profile of stimulus to get the array of names for all of the top level of the session sequences, then index on the first point, given that you only use a single sequence. Example below:

  

• Error trying to create the exe for real-time target

  I have a target program that works well on target in real time, but hangs when I try to create an executable fron, error is:

  An error occurred during the recording of the following file:

  C:\Program NIUninstaller Instruments\LabVIEW 2009\vi.lib\Motion\FunctionBlocks\straightLineMove\nimc.fb.straightLineMove.startStraightLineMove.axis.modeVelocity.0.vi

  Invoke the node in AB_Source_VI.lvclass:Close_Reference.vi-> AB_Build.lvclass:Copy_Files.vi-> AB_Application.lvclass:Copy_Files.vi-> AB_RTEXE.lvclass:Copy_Files.vi-> AB_Build.lvclass:Build.vi-> AB_Application.lvclass:Build.vi-> AB_RTEXE.lvclass:Build.vi-> AB_Build.lvclass:Build_from_Wizard.vi-> AB_UI_Frmwk_Build.lvclass:Build.vi-> AB_UI_FRAMEWORK.vi-> AB_CreateNewWizard_Invoke_CORE.vi-> RTBUIP_CreateNewWizard_Invoke.vi-> RTBUIP_CreateNewWizard_Invoke.vi.ProxyCaller
  
  Method name: Save target: Instrument

  Visit ni.com/ask support request page to learn more about the resolution of this problem. Use the following as a reference:

  Error 6a held at AB_Source_VI.lvclass:Close_Reference.vi-> AB_Build.lvclass:Copy_Files.vi-> AB_Application.lvclass:Copy_Files.vi-> AB_RTEXE.lvclass:Copy_Files.vi-> AB_Build.lvclass:Build.vi-> AB_Application.lvclass:Build.vi-> AB_RTEXE.lvclass:Build.vi-> AB_Build.lvclass:Build_from_Wizard.vi-> AB_UI_Frmwk_Build.lvclass:Build.vi-> AB_UI_FRAMEWORK.vi-> AB_CreateNewWizard_Invoke_CORE.vi-> RTBUIP_CreateNewWizard_Invoke.vi-> RTBUIP_CreateNewWizard_Invoke.vi.ProxyCaller

  Possible reasons:

  LabVIEW: File generic i/o error.
  =========================
  NOR-488: IO abandoned operation.

  The second was the issue, I found myself actually apply to open with an engineer and he helped me. Thank you very much!

• & quot; An error occurred while installing LabVIEW Real-time 2009 (in English). ...

  While trying to install the real time of the third quarter of 2009 DVD module, I get this error message.

  "An error occurred while installing LabVIEW Real-time 2009 (in English). Do you want to continue installing remaining products? »

  After removing the program OR series (USB) 1.1 installation completed up to the end.  If you answer no to continue to install the above question, the following error message refers to abduction OR Serial.

• Application errors of the RT with the PXI-4461 with Labview real-time 9.0.1, DAQmx 9.0.2

  HI -.

  I recently converted a PXI time system real OS (PXI-1042 q chassis, controller PXI-8187, DAQ, PXI-4461, DAQ, PXI-6259). I can write and run DAQmx applications in real time with the 6259 very well. Whenever I try to write a labview RT app to use the 4461, however, it will fail. Note that I can use two cards through MAX I tried switching card slots, just in case it was a problem. Both cards worked with labview, the PXI chassis was before Windows.

  Attached are pictures of the screw base demo I built to show the problem. Since I was a mistake (-200758) if I started from the raw strings, I tried to create a MAX task and use it. The task, but he complained of a buffer is too small. I explicitly put the buffer to work around this problem and still get the same error (-200608). I've also attached a screenshot of the software currently on the Max MAX RT PXI system is version 4.6.2 btw. (I installed the most/all this from DS1 Dev Suite 2010 version).

  Please let me know if I hurt something installed, versions if 4461 just don't play nice with the new BT or RT software, or if something is wrong. Thank you.

  Kregg

  The first error you see is (details in the help-> error explain in LV)

• How can I check if a file exists in the CVI real-time?

  Also, it would be nice if designated so help file functions have been supported in real time or now.

  I tried this:

  If (GetFileAttrs (DataFileName, NULL, NULL, NULL, NULL) == - 1).

  You can check if a file exists in the CVI real-time using GetFileInfo.

  CVI provides a list of the available functions in the CVI real-time here: CVI real-time functions

• cRIO: error when compiling an application in real time

  My code can be executed when the cRIO is connected to the PC with Ethernet cable.

  But when I want to compile my code (Release), I get the following massage.

  Also the image of the massage is shown below.

  ////////////////////////////////////

  Visit ni.com/ask support request page to learn more about the resolution of this problem. Use the following as a reference:

  Error 6 took place to copy in AB_Targetfile.lvclassostBuild.vi-> AB_Application.lvclassostBuild.vi-> AB_Engine_Build.vi-> AB_Build_Invoke.vi-> AB_Build_Invoke.vi.ProxyCaller

  Possible reasons:

  LabVIEW: File generic i/o error.

  E:\2013_05_23a_research\2013_05_27a_Richard's\exercise\2013_07_07_exampleFinder_1DMAFIFO\examples\CompactRIO\Module Specific\NI 9234\builds\NI 9234 is Started\NI-cRIO9024-UConn\My in time real Application\c

  ////////////////////////////////////

  

  Hi Cashany,

  What version of LabVIEW Real-time work? What cRIO you deploy? What version of the Drivers OR-RIO do you use?

  Behind your error dialog box you have a save warning dialog box. What is the full path of ANTICIPATED LabVIEW expects to find this VI to? Have you tried to correct this conflict by moving the file to the intended path or change your project for what he expect from this new path?

  I also note that the listed pathnames are rather long. It is possible that your problem is related to this knowledge base, error 6 occurs to create folder when I build my executable in real time?

• Error 0x800705b4 - microsoft security essentials - brochure-not able to activate real-time protection

  When I try to enable real-time protection in microsoft security databases the following error code appears 0x800705b4. If anyone can help? What am I, I guess what to do? My system is XP. Thank you.

  In these forums, you will find some support for Microsoft Security Essentials (MSE): http://answers.microsoft.com/en-us/protect/forum/mse

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Additional references may include:

  Checklist for installation of Microsoft Security Essentials
  http://experts.Windows.com/w/experts_wiki/89.aspx

  Can I install Microsoft Security Essentials [or any other anti-virus/anti-spyware application] to clean my already infected computer?
  http://answers.Microsoft.com/thread/87058857-D181-4019-a723-efd9a49d9275

• I had my computer checked by professionals and they added Malwarebytes, my MSE keeps turning the real-time protection off the coast of almost every day and take 2 or more going to turn around.

  I had my computer checked by professionals and they added Malwarebytes, my MSE keeps turning the real-time protection off the coast of almost every day and take 2 or more going to turn around.

  original title: MICROSOFT SECURITY ESSENTIALS AND MALWAREBYTES ARE OK, YES or NO

  I had my computer checked by professionals and they added Malwarebytes, my MSE keeps turning the real-time protection off the coast of almost every day and take 2 or more going to turn around.

  There are 2 types of Malewarebytes:

  A free edition
  An edition of Malewarebytes Pro you have to buy.

  Ask thos 'pro' that is they added to your computer.
  Let them also disable the protection in real time of the Malwarebytes.

  I have MSE as my time protection rel and Malwarebytes (free version) as my program "we demand."
  Ways to request that is not run until I turn it on, and it stops when finished scanning.

• (Redirected) Real-time clock error

  My laptop is a dell inspiron 17-7737

  a few times when I unplug my cell phone by USB, the laptop turns off and restarts with a real time clock error message.

  What is the cause of this and how this can be solved

  I use windows 8.1

  Hi a Tesoro.

  Please repost this in the laptop computer forum for assistance.

  http://en.community.Dell.com/support-forums/laptop/