Really simple question of Div

Similar Questions

• Really simple question, function and scroll stop bar does not work

  I worked on different parts of this VI separately, when I put it together the scroll bar and stop working stopped button.

  In the individual VI, both are in the while loop. In the end, I was a scroll bar and a stop to apply every 5 while loops.

  I tried to take the helm of scrolling in and out of the first loop to attach to the rest, but it still doesn't work.

  I'm sure that there is a simple answer that is really stupid, but I played with him for a while.

  I have attached the VI am I train both to false data (in order to test the colored boxes).

  Thank you!

  You have a typical problem of beginner because of the lack of understanding of data flow. Run the code using execution highlighting, and look at the diagram to see.

  1. Your stop is outside any loop and so will be read only by the code only once at the beginning of the program.
  2. Your scroll bar is read in the first loop. All the other loops cannot begin until the first loop finished and since (1) is true, it will never happen if the value Boolean false when the code begins.

  Why do you have so much code duplication? 95% of the code for the loop is the same and can be reused. I don't know that the whole thing could be written using 5% of the total code. Put everything in a loop, iterate over the table 2D to get all values. Don't forget to put a little wait inside the while loop.

• Really simple question of Studio Site

  So, it's a simple general question Site Studio, that I can't seem to work.
  
  We have a content server with three Studio Site Web sites created in gR 10, 4 houses. I would like to add another, but I can't understand how to add it.
  
  Can I simply create a new file in project manually, or is it possible using the Web Client or Site Studio designer?
  
  Thank you
  
  BTW - I have been through the Site Studio manual note and run and could not find a reference of how to do it. I know I'm missing something.
  
  Published by: Desmo December 6, 2011 09:39

  You can use the Designer Studio of site for this.

  Open the designer, the connection of the Site Manager click on 'Edit' below, since the details of Site Connection page, enter the URL of the Cgi server & click on 'Connect', click on 'New' & you are on your way.

  Also, please review the documentation of the Site Studio. This process is detailed well in there & they have a number of quick notes that might help in some post-installation configurations. Let me know if you do not have the URL and I'll post it here immediately!

  Let me know if this works for you and answer your question! :)

  -ryan

• Really simple question [sound recording]. Help, please!

  Can I record audio in first or what I need to save to hearing? I'm just trying to make a dub of a video clip.

  Also if anyone can link me to a good tutorial how dub on the use of adobe products please link to it. Thank you

  You can do it in Premiere Pro, Google search for more information and additional tutorials, like this:

  Premiere Pro CC: Save Timeline voice [video] | Larry Jordan

  MTD

• simple question to function test of value chain

  Hey guys,.

  I m just started using teststand.

  My simple question is related to the function "test string value '. What is the difference between the "type of comparison' CASE SENSITIVE and IGNORE CASE? From my point of view are not really meaningful names.

  To avoid simple and stupid questions like that, I tried to use the internal helper function. I'm wrong when I say that the help features are not as good as in labView? I couldn t find any answer to my question... hmmm... How other people handle this situation? (outside of just trying?)

  Thanks for your help

  Hello

  Case SENSITIVE: it will fail if you compare "HELLO" with 'Hello' or 'A' with 'a '.

  IGNORE CASE: this will pass if you compare "HELLO" with 'Hello' or 'A' with 'a '.

  Hope that explains

  Jürgen

• Simple question R61i Ultrabay...

  It's really a simple question, but I can't find the answer in any of the documents online.  I have a laptop Lenovo R61i 15.1 "widescreen, and I just need to know if it comes with a slot for Ultrabay Slim drive, a drive advance Ultrabay location or an other versions Ultrabay.  I would like to buy a long battery life to adapt to the Ultrabay box, but I see that the different Ultrabay models are not compatible, I want to know what one I need to buy for my computer.  Any help appreciated.

  widescreen 15.4 inch R61i like any other laptop R6x use housing Ultrabay Enhanced readers with EIDE interface and not the new laptop Rxxx SATA interface.

• Starting with a Cintiq in Adobe Flash - a series of simple questions desperately not found!

  I am completely new to the Flash IDE, but I used my 13HD Cintiq with Photoshop in the past. Despite the Tablet works well and correctly drawing, so far Flash feels very weird and almost unusable. I spent hours searching online for answers to these simple questions, and I found nothing. Help please respond if you can!

  1. Eraser brush size: I have the wacom pen, brush and Eraser gum (pretty standard) value. Can I adjust the size of the brush of the pen in the toolbar, but the gum is stuck to the smaller size! I put the tool eraser for the max brush size, and when the stylus is set on the Eraser tool directly, it is larger. How to set the other side of the pen wacom for a larger size of the brush? And aren't there keyboard shortcuts to increase or decrease the size of brush in Flash? (similar [and] in Photoshop)

  2 zoom brush: changes the brush size when you zoom in. People online say the size of the brush is constant, but it is simply not true. When you zoom to 200%, the brush must be twice as big is in 100% zoom. Is it possible to Flash this (normal) behavior?

  3 timeline packaging: can visit the 'step before an image' and "not back an image" (comma and period) key wrap the entire timeline, so walking to the front on the last image will frame 1 and walking backward on frame 1 goes to the last image? It's important for me to animate well loops, and I can't find anything online or in the preferences. Shift + comma and shift + period is acceptable workaround solutions, but they are not ideal, because I have the comma and period mapped to buttons on the Cintiq. I need them to wrap!

  4 digital brush thickness: is there a way to specify a thickness of brush with a number? I have to use the pen to get the STROKE thickness properties? At the very least, can I use a keyboard shortcut to specify the size, rather than click on toolbars?

  Honestly, I'm at the end of my rope here. I'm almost ready to completely abandon the Flash this in Illustrator, and then animate in Flash, so I've drawn everything correctly. Why everything is so different, and why I can't find one of these simple questions online?

  Him long and short of it is no you can't do most of the things you want to do as much as the brush is concerned. Flash has ALWAYS increased the size of the brush as you approach and it decreases when zooming. Why? No idea, but it has always been so.  You CAN increase the size of the brush in numbers but using the properties box. The Eraser is weird in Flash. so I use the Lasso tool and select what I don't want and delete it. Given that you're used to Illustrator you might not realize that selection of a brush stroke areas will NOT select the entire race as in Illustrator. You can only select parts. You can also sort of allow for what you call enveloping chronology by installing a command and by mapping to a custom key command. Make sure that there is a keyframe at the end of the cycle.

  Dropbox - Flash_Select_Next_and_Previous_Keyframes.zip

  Also, this could sort through what you want too:

  http://www.toonmonkey.com/frameJumper.fla

  Finally, Flash is no different that there has never been and it must be considered that, while the Illustrator has been developed by Adobe, Flash was developed by Macromedia and was then bought by Adobe years later then you "cannot really be expected to operate the same. Personally, I HATE the interface of Illustrator and hate the way it works if I hate it if Flash worked as an Illustrator!

  In any case, I hope this helps.

• Can Captivate 6 reset a simple question slide?

  Captivate 6 has the ability to reset a simple question slide?  I know I could use the widgets for custom (via this discussion http://forums.adobe.com/message/4349072) questions, but I wanted to see if it's built-in to COP6.

  Structure of CBT (simplified example)

  Cover the slide list sections A, B, C, with "Show Me" and "Test me".

  1-10 of slides: demonstration, section a.

  11-20 of slides: demonstration, section B

  21-30 of slides: Demonstraction, section C

  Slide 31: Question for the section slide has

  Slide 32: Section B Question slide

  : Slide 33 Question for section C

  If a user forgets the question in section A, they are sent to revise section A again.  At the end of section A, the learner is sent to slide 31, question slide A section (using variables to know that they already do not have the issue once).

  Problem: When they are referred to the section a question, he does not answer them.

  Goal: Restore the question during the second attempt slide is still a Virgin.  Once the slide 31 pass, they will be addressed to the slide 32: 33 drag, etc..

  Thanks for all your help so far.  This CBT is one of the most advanced I did for this organization.  They have certain requirements really well.

  Micky

  Hey Micky,

  I tried to reproduce your script and it worked fine for me, it would be useful that you can share your project ([email protected]).

  Kind regards

  Avinash

• Simple question... How do to add pictures on the body of my MAILS found 1000 results for how can I add photos to my Thunderbird emails

  How can simple question - I add photos to my mail body. But instead of the answer - found 1000 results for how can I add photos to my Thunderbird emails. There are answers that don't apply at all to the question anyway. Why must it be so difficult to get a simple answer to a simple question?

  Thunderbird is a bit like Microsoft, all the reasons as I dumped MS Live Mail.

  First, a lot of help for Thunderbird refers to the menus that may not be visible. It would be useful to you and us if you have your menus and toolbars visible.

  http://chrisramsden.vfast.co.UK/13_Menus_in_Thunderbird.html

  Then, open a window of writing. Activate the menu and operate.

  Now that you see an option "Insert"?

  If this isn't the case, you can assign composing in plain text, which does not support embedded images.

  Tools | Account settings| {Select account} | Composition & addressing and ensure "Compose messages in HTML format" are checked. If it is not already checked, go back to writing a message. No better now?

  Once you have the mode of composition HTML goes, you can use Insert | Image or various permutations of copy - paste and drag - move to the body of your message.

  A manual of sorts: http://en.flossmanuals.net/thunderbird/composing-messages/

• MacBook Pro (retina, 15 inches, beginning 2013) El Capitan 10.11.3, Simple question here: I can't open FinalCut Express (4, I believe). The wheel turns for hours. How can I install/uninstall and will I lose all my old films (for the most part stored on ex

  MacBook Pro (retina, 15 inches, beginning 2013) El Capitan 10.11.3, Simple question here: I can't open FinalCut Express (4, I believe). The wheel turns for hours. How can I install/uninstall and will I lose all my old films (for the most part stored on external hard drives). Thanks for your suggestions.

  You will not lose anything, but the app if you uninstall. If you decide to uninstall use this app to make sure that all the other files which depends on FCE are also deleted however I can't give you any assurance as to whether you will be able to reinstall so that it works correctly. It is a software that has not been supported for almost 5 years and there are conflicting reports as to its compatibility with OS X 10.11. Can't I test it myself.

  Maybe someone else will chime in with their own experiences.

  Russ

• The simple question is "where can I find the installer for the HP Quick start?

  The simple question is "where can I find the installer for the HP Quick start?

  BESR regards

  Hello:

  And here's one for W8...

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_140915_1#tab1

• I don't have to fix anything; I have just a simple question.

  I have just a simple question: what is maximum allowed data on Microsoft Outlook Express emails? Please, let me Know.Thank you.

  You should check with your ISP for this information. Your ISP mail servers dictate the maximum size of your mail more attachments. Outlook Express is simply a client program to encode, and send/receive binary data for you.
  Microsoft® Security MVP, 2004-2010

• Simple question about the signing of the app

  Hello.

  I develop libraries to be used in other apps.

  It will be a cod file, its name will be added to the jad as a dependency.

  My library has access to the secure API (call of the browser), so I have a simple question:

  can I register only my cod library or application that uses my library is expected to be signed in too?

  THX.

  You should be ok just signature cod of the library, if your application uses any API secure. However, I just make a habit to sign everything just in case.

• Create a group of users to ACS 3.3 - simple question

  Hello

  I have a simple question:

  How can I create a group of additional users at the ACS 3.3?

  I don't see the option to delete or create groups of users. Perhaps is it not possible?

  Thanks in advance

  All groups that you have already exist in the list of groups (0 to 499). To "create" a new group, just rename one of the unused existing groups and use.

  If you don't see the groups in your list, you must verify that you have access to see all these groups.

  Verifier check in the control of the Administration, select your admin user ID. In the second table below marked 'administrator', you will see the "available groups" and the editable section 'groups '. move the groups that you want to use available for editable.

  Present and then OU should be able to see these groups on your drop-down list in the section groups.

• BlackBerry Smartphones has simple question on volume of phone ringing.

  I am grateful for this forum because even simple questions like the following are difficult to obtain responded by Blackberry.  Seizing the issue in the 'Help' section on my handheld gives always nothing.  It seems that a large company like RIM would understand more in their user manuals.  Anyway, enough ranting... Here's the question:

  Quite simply, how can I increase the volume of the ringer on the phone?  By pushing the volume button for a call that increase the volume of calls.  Pushing not courts of appeal does nothing.  I'm sure that there is a way to do it, but I'm coming emptyhanded.

  Thank once again the community here as a whole for the excellent work which is made to help other Blackberry users.

  Profiles > advanced > highlight the profile you want to edit > press the menu key and go to 'Edit' > scroll down the list and find what you want to change the volume of the ring tone for example, standard messages