Realtek High Defination Audio speakers is not plugged in, no sound in Windows

Similar Questions

• Realtek High definition audio (onboard) do not recognize the rear speakers. statics of the right speaker.

  Realtek High definition audio (onboard ASUS CG5270)-current driver v6.0.1.6043
  Operating system: Win7 64 bit

  Everything was working fine until last week. I haven't had any changes and update logs don't show updates.

  Question:
  Using "Manager Audio Realtek DD" in the control panel.
  The rear panel does not all speakers connected. (Speakers tested and work on other systems.)
  No noise at all until that I disabled the front jack detection. Now I hear threw the rear speakers but with static 1/2 volume, without mute and the "Realtek HD Audio Manager" shows still no rear speakers.

  Things I have tried:

  1. check the connections (connections of cleaning)
  2. different stakeholders.
  3. Uninstalling the drivers and software.
  4. update of drivers.
  5. Rolling back the drivers.
  6. The system restore.

  Note: the "Realtek HD Audio Manager" shows the digital connection and the façade as available, but disappeared on the rear panel, even if the rear panel is only taken in use.

  I can usually solve these problems on my own, and it's the first time that I used a forum to ask for help in 15 years. I'm just puzzled.

  Hi, reorder,

  As you have tried almost everything to fix the problem, I would like to allows you to check if the rear speakers are disabled and the volume level is fine.  To do this, follow the steps below.

  1. Click Start.
  2. Click on Control Panel and click on sound.
  3. Playback tab, click speakers and click Properties.
  4. Click the levels tab and check if the back entrance is set on mute and uncheck the box.
  5. Select the level to 100% and check if the speaker rear works fine.

  Also, you can try disabling the improvements and check if it helps.

  To turn off the improvements:

  1. access control panel

  2. click on sound

  3. Select the play tab

  4. Select entry speakers/headphones

  5. click on properties

  6. Select tab improvements

  7 disable all improvements

  If the steps above do not work, you can contact the manufacturer of the motherboard and try to reset the BIOS to default settings and check if it helps. You can also take their support and try to update the BIOS and check if it helps.

  NOTE: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from configuration can resolved BIOS/CMOS settings. Changes to settings are at your own risk

  If the above steps you may need to contact the manufacturer of the computer to verify that the equipment works very well and has to be replaced or the motherboard.

  I hope this helps. Let us know the result.

  Thank you and best regards,

  Srinivas R Microsoft Support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Realtek High definition audio not working not

  My realtek high definition audio slowly stopped working and now does not at all, on my Levovo ThinkPad laptop.  I made the resolution of the problems, and he could not find the problem.  The computer tells me that everything works well, but it's not.  I am running Windows 7.  What can I do?

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that high definition audio realtek has stopped working.

  I would like to know some information.

  1. You get no matter what error code or error message?

  2. Did you change the settings on your computer before this problem?

  I suggest you to refer to the suggestions of Shinmila H responded on 10 December 2009 and check if that helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Windows-7-no-sound-high-definition-audio-device/99f19403-c7f3-462e-9ff8-b36f260be979

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• HP Pavilion 15-P030TX (Volume / Audio Swing/leveling question) (Realtek High definition Audio) (BeatsAudio)

  Laptop HP Pavilion 15 - P030TX (Windows 8.1) (running Realtek High Definition Audio) (BeatsAudio) driver 6.0.1.7272

  Product number: J2C69PA #UUF

  -I got her number through which the music volume up tremedously and lower down when the bass get (even though I disabled the beatsaudio the problem is still there).

  -the problem occurs when you use headphones and speakers for laptop.

  -Are there in any case to fix... Help... AS SOON AS POSSIBLE

  Hi great-tree Deku,

  Thanks for helping me with this regard, after many trials, I finally found a driver that is very good for my pc for now.

  Here is the link to the driver:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-132040-1 & CC = US & DLC = in & LC =

  Realtek HD Audio Driver

  version 6.0.1.7135 Rev B

  So far my experience with this version of the driver is quite ok, 5 bars work and the question of swing volume disappeared... but there is only one problem with this driver by which song / midtones / highs are higher, even with the default settings, which makes the audio less complete and the net resulting in less comfortable to listen... I tried to set the EQUALIZER, but she out of her just like hiding the harmony of the sound with the bass... but I'm fine with it now... If all goes well, there will be a more tuned up to the version of the driver after that... =)

  It's my settings of 5 bars

  Bass 77 / 76 equal focus 45 55 40 15 central space (just in case someone else) =)

  Once again, thank you. =)

• Realtek High Definition Audio

  where can I get Realtek High Definition Audio device for my pc?

  First, update your Windows and run the custom update and install all updates. If this does not update your driver, then visit your PC manufacturer's support website, and then search the model of your PC and then download the driver or you can download it from:

  http://www.Realtek.com/

• My internal Microphone table (IDT High Definition Audio Codec) does not work

  Hello

  My internal Microphone table (IDT High Definition Audio Codec) does not work.

  I can't make calls from Skype.

  I've tried everything, but I'm still not able to solve the problem.

  Could you please advice me what to do?

  Could you please provide me with a link with the drivers, I might need to reinstall.

  My computer is Windos 8.1, HP, Intel i - 7 CPU, 64-bit operating system.

  I would really appreciate your quick response to solve this problem.

  Thank you very much

  Antonio

  Hey,.

  Try installing this driver: driver Audio IDT high definition (HD)

  If this fails, try to use the HP Recovery Manager to roll back the driver installed in the factory.

  After the two tests. I would like to know if the option worked.

• "IDT high definition Audio Codex does not start"

  Windows Error Message "IDT high definition Audio Codex does not start" then said to check the audio device, WHAT to DO?

  Hello

  1. Once you get the error message?

  2 have you made changes on the computer before this problem?

  I suggest you try these methods and check the status of the issue.

  Method 1:

  Run the patch from the following link and check the status of the issue.

  No sound in Windows.

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Method 2:

  Uninstall, reinstall the sound card driver and check the status of the issue.

  Uninstall the driver for the sound card.

  a. Click Start.

  b. click on 'Control panel' and select 'performance and Maintenance '.

  c. click 'System' to open the' system properties '.» Click the 'Device Manager '.

  d. click on '+' alongside 'Sound, video and game controllers"to expand this entry.

  e. right click on the audio device and click on uninstall.

  Download the latest driver from the website of the manufacturer of the computer audio card, install on your computer and check the status of the issue.

• SigmaTel High Definition Audio CODEC is not compatible with Windows 7

  SigmaTel High Definition Audio CODEC does not work with windows 7. I tried to get my laptop to detect the hardware and it doesn't seem to be compatible with windows 7. I tried to update but without the cell knowing that its here I can't update. What can I do? Having no sound on my laptop, it is so quiet...

  Exactly the same thing happened to me. I upgraded my computer dell laptop of Vista (32) Windows 7 (32) on 24 December.  My codec high definition audio sigmatel could not be found since then.  This morning, I got fed up and found the free codec download sigmatel high definition audio...  Downloaded and my sound is working again...  We think just too hard I guess.  Hope it will be useful to you.  Good luck.

  http://download.CNET.com/SigmaTel-high-definition-audio-codec/3000-2110_4-173629.html

• High definition Audio Device does not

  I have a laptop Asus N550jk running Windows 8. Video output HDMI works fine, but when I play a video it does that through the computer. I went to "manage audio devices" and found the option of device high definition audio and reading "not connected" below. The video works fine and I am failing to get sound from the TV. Any help on this is appreciated.

  Hello

  Sorry for the delay in response.

  Look at the screenshot, it seems that you have not installed the drivers of NVidia graphics cards. Check this link http://www.asus.com/Notebooks_Ultrabooks/N550JK/HelpDesk_Download/ to download NVidia drivers.

  See this screenshot. It should show like Nvidia HDMI in sound properties.

  

  Try the new installation of the graphics card in the Device Manager drivers.

  Follow these steps:

  1. Download the graphics driver from this link: http://www.asus.com/Notebooks_Ultrabooks/N550JK/HelpDesk_Download/
  2. Press the Windows key + X
  3. Click on Device Manager
  4. Go to the graphics card drivers, right-click on it and select Uninstall.
  5. Restart the computer and install the latest downloaded graphic drivers.

   

  See also this link: download and install the drivers

  http://Windows.Microsoft.com/en-in/Windows-8/all-drivers

  Hope this helps, if you need help with Windows, let us know and will be happy to help you.

• Realtek High definition audio not working not not on Satellite M100

  Ask a Satellite M100, which I shot the pre-installed Windows Vista Home edition to Windows XP Pro, for to use on our network of schools.

  After Installing Win XP SP2, I have no sound and the 'Device Manager' shows 'other devices' - device modem on high definition audio bus with a yellow (!).
  I updated the bios to 2.6 installed toshiba M100 XP drivers chipset, display and audio from the website toshiba.com.au. Updates with bus driver Microsoft UAA KB835221 has also installed.

  Tried the latest audio drivers Realtek R164 but still no sound from the speakers (it worked once for a reboot although if the speakers work!), but sound with headphones.

  I'm running out of ideas to solve this problem.

  Thanks for your suggestions,

  Gary

  Hello

  I'm not very familiar with your machine, but I have a good tip for you that has worked very well for me, try this link:

  http://209.167.114.38/support/download/ln_byModel.asp

  It is the site of Toshiba Canada for drivers and tools. It might be useful to solve your problem and get the right drivers.

  See you soon

• HP Pavilion 500-314: IDT High Definition Audio works do not (HP Pavilion 500-314)

  Hello.  I have a HP Pavilion 500-314.  It works on Windows 10.  My audio worked fine until I had to reset the computer after my computer went into a loop of "prepare the AutoFix.  Once I reset the computer, there was an 'x' next to the small speaker icon in the lower right corner.  When I move my mouse over the "speaker" icon, he says "no speakers or headphones are connected.  It drives me crazy that the other posts about the IDT High Definition Audio did not work.   I would appreciate a quick response.  Thank you for your time.

  Shayna - Ghram-Kaiser

  Hello:

  Given that I don't know what other posts read you about it, what works for most forum members is to install the audio driver IDT W8.1 support page and the driver of your PC.

  This package provides the Audio IDT high definition (HD) to support of office models that are running an operating system supported. -Provides the models of desktop audio driver version and supported operating systems.

  File name: sp65946.exe

  If you have already done this and it has not resolved the problem, unfortunately I don't have any other suggestions for you to try.

• Realtek Semiconductor Corp. - Audio - Realtek High Definition Audio

  NO AUDIO OUTPUT DEVICE IS INSTALLED... THIS IS WHAT MY COMPUTER GUARD SHOWS, I HAVE TRIED EVERYTHING, REALLY I'M NOT PLAYIN SOMEONE PLEASE HELLLP!

  NO AUDIO OUTPUT DEVICE IS INSTALLED... THIS IS WHAT MY COMPUTER GUARD SHOWS, I HAVE TRIED EVERYTHING, REALLY I'M NOT PLAYIN SOMEONE PLEASE HELLLP!

  Try to visit the site Web of Realtek and download the audio driver for your sound card.

  http://www.Realtek.com/downloads/

  Once your on the Realtek download page, click on the High Definition Audio Codecs (software). Then just accept the agreement place a check box, and then click Next, it will give you list all the audio driver available for download. Choose the appropriate driver based on the operating system installed on your computer.

• High definition Audio Device is not working... There is not its what so ever... even if everything is installed correctly

  Then, I used to have Windows Vista and I installed Windows 7... After that, the sound did not work at all... Although the pilot works fine... I tried eveything I can... I even thought that my internal speakers do not work so I went bought new and external speakers headphones, but niothing works... every time I play a song or something the sound bars are moving but thre is no sound... After searching the Web, I found out that the audio device should be set to speaker but I tried all possible ways no results... I downloaded several versions of the software realtek but no use... Please tell me what to do...

  Hello

  Have you tried to install the latest drivers for Vista, since there are not those of Windows 7?

  Check with support from Lenovo and their forums - in their forums, as there are other
  who have faced the same problem then maybe they can help.

  There may be no solution. Use all the methods described previously.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Realtek High definition audio windows home eddition SP3 driver

  Service pack Realtek High definition driver audio windows home eddition 3.I have no volume Manager control and sound control. Please someone how can I do it on a windows XP Home edition Service pack 3. Thank you

  Hi daviddavidovic,

  ·         Did you do changes on the computer before the show?

  ·         It was working fine?

  ·         You get the error message?

  Follow the steps in the article.

  How to troubleshoot sound problems in Windows XP

  No sound in Windows

• [SOLVED] "High Definition Audio Controller" could not be started. "No audio devices installed." The Device Manager has no controller "Sound and video game. Information system has nothing under "audio devices".

  Hello

  I've had my laptop for 2 or 3 years, and the sound was always very well. Yesterday morning my computer came suddenly with the sound with a red X icon. She was not dumb, and yet no sound came. The sound options show that no audio or recording devices are installed (for disabled AND disconnected devices). There is no 'of sound devices or video game"in Device Manager. Information system shows no information (empty) under its device. However, in Device Manager, under system devices, "High Definition Audio Controller" has a yellow caution icon and cannot start.
  I have not installed a new OS or anything recently.
  I have a Dell Inspiron 1545
  Windows 7 Home Premium
  Service Pack 1 (6.1.7601 Build 7601)
  Pentium Dual-Core CPU
  64-bit operating system
  I tried:
  • Relocation and reactivation of "High Definition Audio Controller". I rebooted. No change.
  • Go to the Dell website, download audio drivers for my label service and installation. We decompress in the drivers folder and nothing happens. One will be unzip, try to take me by another plant for IDT Audio and then say 'the hardware found is not supported by this IDT' and is abandoned. I rebooted. No change.
  • Install drivers in safe mode. I rebooted. No change.
  • In administrative tools > Services, I found "Windows Audio". He had started and was on "auto". Six of its dependencies (3 parents, 3 children) had started and were to "automatic".
  • I looked at the system restore. There was a "critical update" this morning here. I restored to a point before update and restarted. No change.
  • Looked in the BIOS for an option on the sound, but could not find one. Restore the BIOS default and rebooted. No change.
  • Ran Microsoft Fix It I rebooted. No change.
  • By clicking on the audio task bar icon runs the diagnostic window thing. It detects a problem with the description: "material changes may not have been detected.
  • Put on the headphones. Nothing changes.

  I'll probably have to do a fresh install, am I not?
  I would be very grateful if you could help, thanks.
  Jerome

  Right, I fixed it myself.

  So I uninstalled "High Definition Audio Controller".
  But this time, instead of just turning it back on and let it install it himself, I clicked on "Analysis of the hardware changes" (under the Action). He finds that a new device called PCI something under other devices.

  Then I open up Windows Update and click on search for new updates (it also analyzes the drivers) and I think it just automatically reinstall "controller Audio high definition" and then there was no problem of yellow warning sign thing.

  If it does not, simply play in Device Manager with looking for changes on the hardware and the update of bollocks.

  If you're still stuck, try "Add inherited harware" (this will install an OLD device), click Advanced, click on "sound devices" and video games, wait a while, find a suitable device and continue the process...