Reaper of multiple transitions simultaneously.

Similar Questions

• Hyperion Planning - open multiple dataforms simultaneously

  Hello
  
  Hyperion Planning, do we have any option / property to open several simultaneous dataforms, at least in the more recent versions.
  Please suggest if we have an option.
  
  Thank you

  I think that you can be referring to the following parameter - http://docs.oracle.com/cd/E17236_01/epm.1112/planning_admin_11122300/ch06s04s09.html
  If you have several forms that are opened in the workspace it can invalidate the cache from the earlier form, if you go back to the previous shape and save an error can be generated, with the configuration property it is possible to set the number of forms that can be cached.
  I think that this always refers to multiple instances of an open in the workspace and not planning adf application.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Update of multiple charts simultaneously

  Hi, I have a VI containing graphs multiple (on a page of a control tab, to be precise) like these:

  

  Now, I would like when the VI starts to initialize all these graphics the same way:

  

  Basically, removing all the names of the plot and makes them all is not visible.

  Later, my VI runs, I want to fill every graph with relevant data and to decide on the number of plots in each graph, the names of plots etc. programatially.

  Now, it's OK to do as highest when there are some graphics, but I have some 16 of them and it's a real pain to add wires as in the screenshot above whenever I decide to add a chart in the front panel or if I decide that additional initialization is necessary.

  Is it possible somehow a loop? I have visialize some kind of loop passing through all the graphs belonging to some object of LabView and define somehow all of these properties, while maintaining the ability to reference each individual chart later in the program (by that name).

  Thanks in advance for your help.

  Create a table of references for each of these graphs.  Separate property notes using the graph and feed table of references to the loop.  Now, the loop will be autoindex on the table and setting the properties of each of these graphic references.

• acquisition of signals from multiple cards simultaneously

  Hello

  I am trying to acquire the signal of my cards OR PXI simultaneously but having some difficulties to implement which.

  Here is my configuration:

  Installation of equipment:

  (1) chassis NI SMU-1071

  (2) map of NI PXI - 4461-2 I / P and O/P 2

  (3) map of NI PXI - 4492-8 I / P

  Here is the acquisition code I wrote:

  

  The problem is that when I use the I / P channels on the same card (4461 or 4492) then, the code works well, but if I use the channels of entry on two simultaneous cards then I get an error message:

  "

  200106 error occurred at DAQmx Read (analog 1 Wfm NChan NSamp d) .vi:

  Possible reasons:

  Property must have the same value for all channels on the device.

  Property: RefClk.Src

  "

  I tried to set the clock reference to "The clock on board", but I still get the same error.

  What should I do to reslove this problem?

  Thank you

  Ritesh

  Hi Ritesh

  Have you tried to import a common clocks ref for 2 boards? This is not supported by all devices, but for those that you combine, this should be confirmed as you can see on page 44 of this document.

  WenR

• Windows Movie Maker, add multiple transitions...

  So I use the windows Director, received a 2000 dollar laptop in the hope that it would work better than my old mac.

  I tried EVERYTHING, select all, clicking wildly. I'm tired and actually take a stick flash from this computer in my old mac where I can do it with a single click.

  PROBLEM: I 1265 pictures I put in a slideshow, with transitions between each, and music. MUSIC: CHECK. PHOTO: CHECK. TRANSITIONS: ONE AT A TIME! WTF! Sorry about the language, but he me flusters when a mac I got in 2006 surpasses my two day old PC. On mac, I press a button and random transitions appear on ALL my photos.

  Any help? I'm on vista premium, Movie Maker 6.0.

  Hello roadrunnersk,

  Thank you for using the Microsoft Windows Vista Forums.

  Sorry, you have a problem with that!  I added a few steps, I hope, will help with the addition of transitions.  Please let us know status.  Thank you!

  1.	On the table of the storyboard / timeline, click the second of the two video clips, titles or images that you want to add a transition between.
  2.	Click on Tools, and then click Transitions.
  3.	In the content pane, click the transition that you want to add. You can click read under the screen to see a preview of what looks like the transition.
  4.	Click the Clip, and then click Add to the timeline or Add to the storyboard table.
  Notes ·         You can also add a transition by dragging in the timeline and dropping it between two clips on the video track. Or, if you are in the view storyboard, drag the transition to the cell to transition between two video clips or pictures. ·         If you updated your Windows XP computer to Windows Vista, any other transitions and effects that you had previously downloaded and installed will not be available in the current version of Windows Movie Maker. Add transitions and effects to pictures and video in Windows Movie Maker: http://windowshelp.Microsoft.com/Windows/en-us/help/f02d7249-5247-49C9-9b8e-8c32dede2ee71033.mspx#E3

  Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• BlackBerry smartphones to send multiple photos simultaneously

  Anyone know how to send multiple photos by e-mail using the storm?

  Yes. Compose email and press Menu > attach a file.

  You can do it again and again and again.

• several imported still images (how to change "timing" AND make multiple transitions)

  I imported into project still many pictures resources.  The default for each time seems to be 5.1 seconds.  If I drag them in the timeline, select them all and change the duration, there are gaps between the images... How can I scrunch together easily, OR how change the default duration before I drag them in the timeline?

  Second... If I have all my photos on a timeline can I set the effect of transition on more than two at a time?  I can't put the transition for all of them at once (a different query)

  Thank you, - bill

  I imported into project still many pictures resources.  The default for each time seems to be 5.1 seconds.  If I drag them in the timeline, select them all and change the duration, there are gaps between the images... How can I scrunch together easily, OR how change the default duration before I drag them in the timeline?

  When you have selected your still and used the command of speed/duration, do not forget to check the option 'Edit Ripple, Shifting trailing Clips' in Control Panel. That will remove any empty what space between clips that would be otherwise generated to reduce the duration of your sequences.

  Second... If I have all my photos on a timeline can I set the effect of transition on more than two at a time?  I can't put the transition for all of them at once (a different query)

  Yes, although there are two preliminary steps. First of all, in the effect controls panel, click the button of the flyout (this stack of pancakes with the little downward arrow) or go in Edition > Preferences > general and select the default Transition duration option and change to the desired option. Secondly, in the effect controls panel, select the transition you want and right click and select "Set selected as Default Transition".

  Now, select your clips/still images in the timeline panel and go to the sequence > apply Transitions to the selection by default; the passage you have just configured will apply to all of your clips. Note that, by default, this will add audio transitions as well, if you use combined video/audio clips (probably not a problem in your case that you use still images), but you can hold down the ALT key to select just the video or only the portions audio your clips, if you want only a single transition type or the other. You can also temporarily block tracks where you don't want transitions before using the command.

  Also, given that you work with still images, you don't have to worry about the handles; If you import a still in the first, even if it lasts only a single image, you have an indefinite/infinite amount of images to use for editing and transition. Audio/video clips are a different story, of course...

• Report 10g Server (run multiple queries simultaneously)

  Hi, I'm having a problem with the report server and I was wondering if there was a solution to this problem, I'll have.
  
  I have several users who send requests from different report on the report server. My problem is that if the first is a report and a report of 1000 pages running, the 2nd user submits an application during execution of the 1st request, I noticed on the console of the report server, it says "pending in the queue.
  
  Is there an option on the report server to allow applications to report both the user run simultaneously? In this way, users are not waiting for another request to finish. I'm looking and I'm not just see.
  
  Any help is appreciated.
  
  Chris

  Chris,

  On the application server, edit this file:

  \reports\conf\.conf

  In this folder, find: engine id = "rwEng" and change the value of maxEngine from 1 to 4

  Save the file and restart the report server.

  I hope this helps.

• Can I run fire multiple accounts simultaneously

  Can I run Facebook multi accounts - pull at the same time to help keep other members of happy family

  Try this extension:
  https://addons.Mozilla.org/en-us/Firefox/addon/Multifox/

• How display duration of multiple images simultaneously

  I had 14 images imported into first time pro 00; 00; 04 29 by images. I have audio 32 sec, I reduce all images at the same time as the audio duration, I tried selecting all images at once dragging (not working), is there a nest of chance can operate

  

  Nest and use the extensible tool or

  Select all and the ripple of trim

  

• How can I use additional CPU power to make multiple projects simultaneously in adobe media encoder?

  I have a 5960 x and I use maybe 30% of a render and only up to 3.3 GHz. cpu load since I m d OC to 4.2 GHz, I know that there must be some extra cpu power to operate.

  Also I often renderings of projects 40 + and it would be a huge time saver.

  Thank you!

  Sorry, I misread that.  I'm afraid that it cannot be done now.

  Try to submit a feature request:

  Feature request/Bug Report Form

• Sometimes sound does not play when you play multiple sounds simultaneously

  It is also a matter of best practices, too.

  I built a game that uses many different sounds (about 48 I think). Many are short, less than a second and a few are longer, of the music cues, etc..

  Example problem: sometimes when there are a lot of play sounds and a music signal is supposed to fire, the sound of the music does not play. I did a trace on the function that plays the sound music and performs this function. Are there limits to how sounds can play at the same time? (It does not only happen to a particular sound, could be any noise)

  Also, regarding best practices, if there is a sound that could be played several times at the same time, a new instance of the noise must be created each time as its played? If there is that a single instance of this noise, will be the previous reading of this noise cancelled when it is called for replay?

  Thank you

  Adam

  There is a soundchannel 32 limit (which may exist at a given time) imposed by the flash player.  all two identical sounds may not play in a number of ms on the other.  There is no perceptible advantage and refusing the deductions that you may be able to play the sounds that are noticeable.

• effects of transition stretching / shortening

  Hey guys! I think I have a simple question - how do expand you several cross dissolves / transitions simultaneously through multiple clips? Is it possible, instead of individually expand each dissolution?

  If you shift-click on each transition, double-click the last of them and you will be presented with the dialog box of the duration of the Transition, in which you can enter a specific term that will apply to all the transitions.

• Calendar of transition control in several multi-state objects

  How can you control the timing of multiple transitions multistate DPS? If you have two slide shows with a single button by telling everyone to go to a particular State, the transitions go in sequence rather than simultaneously. You can adjust the schedule so that everyone goes at the same time and for the same duration?

  Currently, you cannot run two actions button at the same time.

• PXI-5122 and PXI-6259 read 2 channels simultaneously

  There is a single PXI-5122 digitizer card and a PXI-6259 DAQ card in our PXI system, we use Labview and TestStand (model Batch) to test the multiplication Board simultaneously, sometimes up to 8 boards are tested. We have some problems, such as the results of the tests is not reliable and sometimes blocking of Labview. Everything works fine when test single board. Thus, we feel that multiply causing this problem of acquisition of string data. It's great, if someone has the same problem and we can share the knowledge. My question is as follows:

  1. If two channels have been configured, read the two channel simultaneous cause blocking of the system or data damaged?

  "lu niScope WDT.vi" is reentrant, we can use two Subvi to call the "niScope Read WDT.vi' access the two channels simultaneously.

  2. If we set up a channel in another channel is reading the data, this situation will cause the search system or corrupt data.

  Concerning

  Samuel

  Hi Samuel,.

  You shouldn't have any difficulty to read several channels on your 5122 or between your 5122 and your 6259. You receive an error message when your test is blocked? What happens when your test is not reliable? Are you incorrect data and if so what is the data vs expected data acquired? You should be able to set both your channels in a single task, which would be using a read niScope WDT.vi to be used by the device. You are working from example or have you developed your own code? What version of the driver NOR Scope and NI-DAQmx driver do you use? You can find the driver version number in the measurement and Automation Explorer under the software section.

  What kind of test are you running? Your PXI chassis is controlled by a computer or by an on-board controller? Evolution of the rate of acquisition has an effect on your program?