Report 10g Server (run multiple queries simultaneously)

Similar Questions

• Set the name of server report dynamically at run time

  Hi guru,.
  
  I called reports of the forms that I hardcode the name of report server in my code.
  Is there no alternative to set the server name of report dynamically at run time, is how to find the name of the report server and that in through my code as a parameter.
  
  
  can you give some examples of codes... Thank you

  One way that we usually followed before was to store the name of the report server in other tables in the database, then choose this name whenever we want to run a report.

  In this way, it is easy even if there is no change in the name of the server.

• 500 internal Server Error while calling reports 10g

  I use independent forms and report services. I get 500 Internal Server Error intermittently while call reports 10g.

  500 internal error is a generic error and it could be due to several reasons such as a bad configuration or the scarcity of resources.

• Insufficient system resources when running multiple images

  Hello

  I don't know if I'm posting in the correct forum, but I have a problem here.

  I am under some applications of intensive testing in mulitple vm images, with these images hosted on a server.

  When I run 2 images, applications work fine.

  But when I run 4 images simultaneously, the applications start to fail with errors such as "insufficient system resources" or "invalid".

  I surf autour and found "invalid" could also be due to a limitation of County of handle, which I think is sorta question "insufficient system resources".

  Performance for 4 images are not ideal.

  I wish that all the images to the performace to about 75% CPU.

  But I couldn't just 2 to run at 75%, the other 2 to 25% of the CPU.

  I wonder if changing to ESXi could help solve this problem.

  Anyone who could comment?

  Do not specify more than one processor in your virtual machines unless you really, really need. Multiple virtual machines that you have, the more it will be difficult for VMware plan all processors which need time CPU. Also make sure that your disk by looking at the settings of the host, is not the bottleneck as it's usually my cause of bad results.

  Guy Leech

  VMware vExpert 2009

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• Problem with cgicmd.dat in reports 10g

  Dear Sir/Mam,
  
  I configured serve report on solaris 10. When running reports using web url with key mapping in the cgicmd.dat folder, I get a very strange problem. Regardless of settings m passing reports through a web url an additional "=" character is added automatically. I give you the details of the files below. Please help me. Thanks in advance.
  
  The content of rwservlet.properties: -.
  
  SERVER_IN_PROCESS = YES
  RELOAD_KEYMAP = YES
  DIAGNOSIS = YES
  TRACEOPTS = TRACE_ALL
  TRACEFILE = rwservlet.trc
  FIND = TRACE_REPLACE
  SERVER = test
  #IMAGEURL = http: / / < web_server_name >: < port_num > rwservlet/reports /.
  KEYMAPFILE = cgicmd.dat
  #DBAUTH = RWDBAUTH. HTM
  #SYSAUTH = RWSYSAUTH. HTM
  #ERRORTEMPLATE = RWERROR. HTM
  #COOKIEEXPIRE = 30
  ENCRYPTIONKEY = reports9i
  #DIAGBODYTAGS = < reports_servlet_help_file_title >
  #DIAGHEADTAGS = < reports_servlet_help_file_body_tag >
  #HELPURL = < url_of_customized_help_file_for_reports_servlet >
  #SINGLESIGNON = YES
  OID_ENTITY = % REPORTS_OID_ENTITY %
  #ALLOWHTMLTAGS = NO
  #REPORTS_NETWORK_CONFIG = rwnetwork.conf
  #OIDCON_INIT = 10
  #OIDCON_INCREMENT = 10
  #OIDCON_TIMEOUT = 0
  DEFAULTCHARSET = JA16EUC
  #DEFAULTCHARSET = EUC - JP
  
  The content of cgicmd.dat: -.
  
  osk47zgenp: report = 1% userid=utimainapp/utimainapp@testdb rundebug no = NO delimited = destype = cache mode desformat = bitmap mast_ext = roymask.xls p_start_dt = p_end_dt % %2 = 3 p_srvc_id = 4% p_sch_id = 5 p_agnt_cd = 6% p_user_id = %7 = 8% p_sesn_id %
  
  
  Reports URL is: -.
  
  http://10.10.100.110:8890/reports/rwservlet?osk47zgenp+rp_os424_mat_recon.RDF+30-Jun-2009+01-Jan-2010++31++Shashi+1492544
  
  Error coming on the browser: -.
  
  REP-110: file 'rp_os424_mat_recon.rdf =' not found.
  REP-0110: cannot open the file 'rp_os424_mat_recon.rdf ='.
  
  The content of rwservlet.trc: -.
  
  [2011/1/19 7:37:1:624] (RWClient:doGet) enter...
  From [7:37:1:625 1/19/2011] bug 50103 (RWClient:doGet): QueryString: osk47zgenp + rp_os424_mat_recon.rdf + 30-JUN-2009 + 01 - JAN-2010 ++ 31 +
  Shashi1492544
  [2011/1/19 7:37:1:625] 50103 (RWClient:processRequest) Info: recharge the key mapping file: s_reloadKeyMap: YES
  From [7:37:1:626 1/19/2011] bug 50103 (KeyEntry:replaceParams): report = rp_os424_mat_recon.rdf = userid=utimainapp@testdb rundebug = N
  O desformat = delimited destype = mode cache = bitmap mast_ext = roymask.xls p_start_dt = 30 June 2009 = p_end_dt = = p_srvc_id = 31 = January 1, 2010
  shashi = p_agnt_cd = 1492544 = p_sch_id = p_user_id = p_sesn_id =
  From [7:37:1:626 1/19/2011] bug 50103 (RWClientUtility:isFromPortal): Portal: null
  From [7:37:1:626 1/19/2011] bug 50103 (RWClientUtility:isFromPortal): webdbversion: null
  [2011/1/19 7:37:1:627] 50103 (RWClientUtility:findServer) Info: Failed to connect to the server: test
  [2011/1/19 7:37:1:627] 50103 (RWClient:startInProcessServer) WARNING: start the test server inprocess
  From [7:37:1:657 1/19/2011] bug 50103 (NetworkUtility:getIOR): find a server and returning the IOR
  From [7:37:1:658 1/19/2011] bug 50103 (ServerManager:getServer): object of class server Found
  From [7:37:1:659 1/19/2011] bug 50103 (ServerManager:getServer): ping server successfully
  From [7:37:1:660 1/19/2011] bug 50103 (RWClientUtility:getReportsServer): server: test
  From [7:37:1:660 1/19/2011] bug 50103 (ServerManager:getServer): object of class server Found
  From [7:37:1:660 1/19/2011] bug 50103 (ServerManager:getServer): ping server successfully
  From [7:37:1:661 1/19/2011] bug 50103 (AuthManager:getAuthId): secure server: false
  From [7:37:1:663 1/19/2011] bug 50103 (RWClientUtility:getReportsServer): server: test
  From [7:37:1:664 1/19/2011] bug 50103 (RWClientUtility:getReportsServer): server: test
  From [7:37:1:664 1/19/2011] bug 50103 (ServerManager:getServer): object of class server Found
  From [7:37:1:665 1/19/2011] bug 50103 (ServerManager:getServer): ping server successfully
  From [7:37:1:666 1/19/2011] bug 50103 (RWClientUtility:isFromPortal): Portal: null
  From [7:37:1:666 1/19/2011] bug 50103 (RWClientUtility:isFromPortal): webdbversion: null
  From [7:37:1:667 1/19/2011] bug 50103 (RWClient:runReport): cmdline: p_end_dt = January 1, 2010 = baseUrl = http://10.10.100.110:8890 / report
  s/rwservlet/GetFile/userid=utimainapp@testdb USER_AGENT = "Mozilla/4.0 (compatible;". MSIE 7.0; Windows NT 5.1; (Trident/4.0) ' p_srv
  C_ID = 31 = 10.10.100.110 SERVER_NAME = jobname = "rp_os424_mat_recon.rdf =' p_sesn_id = mast_ext = roymask.xls getFilestr = / not > imagekey = re"
  ports9i p_user_id = REMOTE_ADDR = 10.10.105.54 SERVER_PROTOCOL = HTTP/1.1 authid = RWUser = 30 June 2009 = mode p_start_dt = bitmap REMOTE_HO
  ST = 10.10.105.54 destype = cache SERVER_PORT = 8890 = shashi report = p_sch_id = "rp_os424_mat_recon.rdf =" expiredays = 0 ACCEPT_LANGUAGE = en
  -We desformat delimited = p_agnt_cd = 1492544 = rundebug = / rwservlet SCRIPT_NAME = NO
  From [7:37:1:668 1/19/2011] bug 50103 (ServerManager:getServer): object of class server Found
  From [7:37:1:669 1/19/2011] bug 50103 (ServerManager:getServer): ping server successfully
  From [7:37:1:669 1/19/2011] bug 50103 (ReportRunner:connectToServer): new connection request for userid: RWUser server: test
  From [7:37:1:673 1/19/2011] bug 50103 (ReportRunner:connectToServer): successful user connection: RWUser server: test
  [2011/1/19 7:37:1:709] 51022 (ReportRunner:Release) Info: Connection object has been released.
  [2011/1/19 7:37:1:711] Exception (110): File 'rp_os424_mat_recon.rdf =' could not be found.
  REP-0110: cannot open the file 'rp_os424_mat_recon.rdf ='.
  
  oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
  at oracle.reports.RWExceptionHelper.read(RWExceptionHelper.java:67)
  at oracle.reports.server._ConnectionStub.runJob(_ConnectionStub.java:504)
  at oracle.reports.client.ReportRunner.dispatchReport(ReportRunner.java:288)
  at oracle.reports.rwclient.RWReportRunner.dispatchReport(RWReportRunner.java:86)
  at oracle.reports.rwclient.RWClient.runReport(RWClient.java:1671)
  at oracle.reports.rwclient.RWClient.processRequest(RWClient.java:1525)
  at oracle.reports.rwclient.RWClient.doGet(RWClient.java:366)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
  at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
  at oracle.security.jazn.oc4j.JAZNFilter.doFilter (unknown Source)
  at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:663)
  at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
  at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
  at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:285)
  at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:126)
  to com.evermind.util.ReleasableResourcePooledExecutor$ MyWorker.run (ReleasableResourcePooledExecutor.java:192)
  at java.lang.Thread.run(Thread.java:534)
  
  From [7:37:1:711 1/19/2011] bug 50103 (RWClientUtility:isFromPortal): Portal: null
  From [7:37:1:711 1/19/2011] bug 50103 (RWClientUtility:isFromPortal): webdbversion: null
  From [7:37:1:716 1/19/2011] bug 50103 (RWClientUtility:isStatusFormat): statusformat: null
  From [7:37:1:717 1/19/2011] bug 50103 (RWClientUtility:isStatusFormat): statusformat: null
  [2011/1/19 7:37:1:717] (RWClient:doGet)... .exit

  Hello

  The document 341188.1 is available on http://support.oracle.com

  The problem is a bug fixed in the version of Group of patches 2 rel 2 reports 10g (10.1.2.2.0)

  Concerning

• Apex 3.2 and 4.0 on the same 10g Server?

  Hello. I have apex 3.2 on a 10g server. It is in production with some applications.
  I want to do some tests, to import applications, refuse, etc. on 4.0 but leaving 3.2 upward and the work.
  Can I install apex 4.0 on the same server, leaving the 3.2 work?
  and... The html even Server CAN access applications and systems?

  Andres,

  You can have only one version of the APEX by Oracle instance. For example, you cannot run 3.2 & 4.0 simultaneously.

  You can configure a server to Oracle's HTTP for the two APEX 3.2 & 4.0.

  Some advice: If you want to test APEX 4.0, so it is best to not do it on the same server/instance that you have in production. Even if you have only one machine, you can easily create an instance of Oracle in the Amazon Cloud, or use VMWare to run your tests.

  Thank you

  -Scott-

  http://spendolini.blogspot.com
  http://www.sumneva.com

• running multiple instances of VBAI does not work

  Hello everyone,

  We are 4 common examples of VBAI at the same time. Recently, he had to copy it (because production is doubly).

  With our first system, we have no problems when you try to run multiple instances of VBAI. This time, however, it does not.

  Our system:

  • 4 cams: Allied Manta 201
  
  
  • camera is triggered (rising edge) separately, but almost simultaneously.
  
  
  • Four port NIC (with the right driver :-))
  
  
  • 4 ports and our on-noard port are bridged.
  
  
  • computer: intel I5 (4 cores)
  
  
  • License to run Vision Builder 2012.
  
  
  • Programmed with Vision Builder HAVE 2012.
  
  
  • Interface programmed in c# (receives images of the relevant info 4 programs and displays on the screen).

  Action taken:

  • Test with our program that opens 4 instances of VBAI. Result: 1 single instance opens.
  
  
  • Removed our bridge a connected our cams on a switch. Result: 1 single instance opens.
  
  
  • Open VBAI 4 VBAI-programs directly (but separately). Result: Each program opens and is fully working.
  
  
  • Open 2 programs at the same time (with VBAI). Result: Fist opens and is equipped with the work. At the opening of the second program, that we get error messages saying that it is not possible to connect with our camera.
  
  
  • The test above was created with:
  
  
  1. The cam connected to our network card 4 ports.
  
  
  2. The cam connected through a switch.
  
  
  • I have also written 4 simple programs (just enter a period followed by image)
  
  
  • With these programs, I tried the above test (VBAI 2 hours and run both programs at the same time). Same problem: 1programs starts, the error messages when opening a second program.

  I have the impression that it's a network problem, but what bothers me is that, when the bridge, I don't see a difference with our another computer that works on our original assemblyline. When you work on a referral that our parameters are the same as on a computer that does not have a network card 4 ports. The computer (and liked)) allows us to run multiple instances.

  Any thoughts?

  Any help would be greatly appreciated. I'm sure I'm missing something obvious here, but I don't really see.

  If you need more information about something, let me know.

  With sincere friendships.
  Tom Declercq

  
  

• cRIO run multiple Applications?

  Is it possible to run multiple applications on a target cRIO?  Would they all need to be part of the same project in LabVIEW?  Can I set more than one as a starting VI or need to create a VI that would start up individule applications?  They are the basics of Ethernet and not to use or share any what I/O.  I looked around, but didn't see much information on this subject.  Thank you!

  Good afternoon Matt,.

  It is possible to run several applications on a target of cRIO as long as they are in the same project and do not exceed the capacity of the target memory. You can only mark a VI the sixth start-up, but, as you said, you have this VI call your other applications. You can find useful the following documentation:

  Programmatically launch an executable file or VI on a real-time controller

  http://digital.NI.com/public.nsf/allkb/A7DBA869C000B5AE862570B2007C4170

  Using VI server to run LabVIEW VI real time stored on a hard drive of the RT series

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/4364

  Getting started with the Module time real LabVIEW

  http://digital.NI.com/manuals.nsf/WebSearch/12F0FF18FB1BB533862575AD00696100

  I hope this helps!

  -Ryan S.

• How to run multiple copies of distilling on the same machine?

  What version of Adobe PDF Converter do I need to run multiple copies of distilling on the same machine?

  I see that Distiller Server is EOL so what should I use to accomplish the same task.

  Hi mmaraffi,

  You will not be able to run multiple copies of Distiller, because this is a violation of the EULA.

  Let me know the version of Acrobat is installed on your computer?

  Kind regards

  Nicos

• How to configure the print server on multiple machines?

  Hello
  
  Can you get it someone please let me know the installation process of print server on multiple machines?
  That's what I thought.
  1. install Ghostscript on all machines.
  2 configure the print server on all machines.
  3. I guess I should point the IP address somewhere as a final step?
  
  Thanks in advance
  PM

  The steps you mentioned is correct.

  When you configure the print service, you can set the URL of the web application server financial information in .properties and this file will get stored in the HSS registry (this is the step where you run the FRprintserversetup.cmd). So when you run Setup of each print server there will be created for this purpose in the HSS registry entries. Then, there will be an internal logic that will work on what server should take what process.

  THX

• Report is always run when occur Validation errors

  Hello.
  
  I use Apex 4.2.1 against Oracle 11 g 2 and Oracle Application Server (mod_plsql).
  
  My set-up:
  I created an application that contains a statement such as "classic" which is driven by a WHERE clause. I have also two date fields in an HTML area on this page. These fields are used in the report of the WHERE clause. And the report is run by clicking on a button to GO to the page.
  
  Here's what looks like the WHERE clause:

  where table_date >= to_date(nvl(:P1_BEGIN_DATE, '01-jan-1900'), 'dd-mon-yyyy') and table_date <= to_date(nvl(:P1_END_DATE, '31-dec-2300'), 'dd-mon-yyyy')

  It is designed so that, if one of the date fields is NULL, then the minimum or maximum date is used for the query.
  
  Date of these fields should always have a value when the report is run, and so I created two after do NOT offer validation of NULL value, one for each of the date fields. If one of these fields is NULL when the user clicks the OK button, an error message appears in the tray at the top of the page.
  
  Looking at all this, you might realize (like me) in the WHERE clause above nvl() functions are redundant. After all, the validations are supposed to prevent these date fields to NULL when the report is run. In any case, this configuration works ok and observed a strange behavior with Apex.
  
  
  My problem:
  If none of these validations throws an error message, the report is still running. In previous versions of the Apex, if a validation (or for that matter, any error) is launched, the report remains static. The region of report does not disappear and the report is not called until the user corrects the error.
  
  If the two date fields are filled, I click on the GO button and the report returns correctly, say, 100 lines. But when I empty both date fields and click OK, validation errors appear and the report still works, now to return the maximum number of lines, say, 1000.
  
  What I tried:
  I added a branch Page with 'No. Inline Validation errors displayed' condition so that the branches back to itself when no errors appear inline and I changed the error messages from validation to appear online. This has no effect.
  
  And if I remove the WHERE clause above, nvl() functions then, when validation errors are thrown, the data in the report are replaced with the message "No data found". All very disconcerting to my users.
  
  Does anyone know why the reports of the Apex are always executed in the presence of validation errors?
  And how to work around this behavior?
  
  Thanks for any help.
  
  Elijah

  The problem with the DA is a common blunder - the conditions should be adjusted.

  Remove the condition on the DA itself - it decides to make the DA as part of the page. In your case, you always want to do (no condition).

  You need to define is the condition that causes the DA to do it's work when the event happens in the browser (click the button).
  A javascript as expression (sorry purists JS)

  ($v('P1_BEGIN_DATE') !== null) && ($v('P1_END_DATE') !== null)
  

  Check this for your situation, there seems to be a bunch of ways to check for null
  http://enterprisejquery.com/2010/10/how-good-c-habits-can-encourage-bad-JavaScript-habits-part-2/

  In these cases, your friend is running in debug mode with the console open browser log.

  You may need to wait for someone to APEX dev for your comments on the differences between 4.2

  Hope that makes sense

  Scott

• Running multiple instances of Flash IDE CS (6)

  I have a build machine compile my fla files by running Flash.exe command line and providing a JSFL file as a parameter. I want to run multiple instances of the IDE Flash to enable simultaneous generations on this machine otherwise it only one thread running on a build machine that is a waste of resources.

  So, is it possible to run multiple instances of the Flash IDE? Perhaps there is some sort of command line? I have Flash CS6, but there should not be a lot of differences with CC, isn't it?

  I don't think that you can run multiple instances of flash CS6 and CC.

  -Reynaud

• Manager server with multiple instances CF10

  Hello

  I'm having some trouble connecting to instances of ColdFusion I installed the 64 bit with CF10 RHEL6.1.

  If I just add a single server that points to the default cfusion instance

  Host: 192.168.0.10

  Port: 8500

  Server Manager connects and I can view the settings.

  If I then add a second server that points to an instance newly packed

  Host: 192.168.0.10

  Port: 8501

  The ability of the server to connect to an instance manager becomes poor at best. I can't do a diff of parameters if they both happen to connect.

  I need to enable something specific in the admin of each instance?

  See you soon,.

  Simon

  LCD SCREEN? You mean livecycle dataservices? If I google (based on the message shown in the screenshot):

  double Server session manager

  I get this as the first hit: http://www.shilpikhariwal.com/2010/08/duplicate-flex-session-error-in-server.html

  It seems that it may be just what you need, especially in light of your next note on running multiple instances. (Not sure of the impact of J2EE session vars).

  Let us know if that helps.

  /Charlie

• Report Apps Server error: REP-00181

  Hi all
  
  A few days back, I met this problem, which was due to a high activity in a kind of special relationship.
  
  Report Apps Server error: REP-00181: error reading or writing of config file
  
  I crossed the metalink and came across the document id. 371742.1, which States:
  
  Edit the file $ORACLE_HOME/reports60/Server/REP60_ < SID > .ora.
  
  + 1. Stop the report server with the script of adrepctl.sh +.
  
  + 2. Change maxengine = 1 maxengine = 2 +.
  + 3. Remove the line englife = 50 +.
  
  + 4. Start the report server with the script of adrepctl.sh +.
  
  May I know what are these parameters and their impact the report server?
  
  Thank you
  Anchorage

  minengine: is the minimum number of runtimes this master server must be available to run reports.

  maxengine: is the maximum number of runtimes that master server is available to run reports.

  More details can be found in the following link:

  Tuning Oracle9iAS reports Services
  http://download.Oracle.com/docs/HTML/A92102_01/pbr_tune.htm

• Multiple profiles can be addressed by running multiple installations of Thunderbird; rather than put several profiles on a plant?

  Please don't laugh, but I'm running three quite separate mail programs Eudora on a PC; each one with a different email address. I have three icons, and emails are completely separate. I'm just trying to determine if I can do the same with Thunderbird. I know that you can configure multiple messages in a single installation, and then switch back within this facility. But I'm trying to see if I can keep doing what I'm doing now. I know that I have to open a new Eudora program for each email address, but I'm OK with that. Any thoughts?

  Eudora becomes old and unstable, so I would go if I can.

  Thank you very much.

  Although I don't really no why you must run multiple instances of tuberculosis, especially since the TB program folder and the profiles folder are separated, to do so are described here:

  http://KB.mozillazine.org/Run_multiple_copies_of_Thunderbird_at_the_same_time