Reboot discs do not support my PC model when try to restart

Similar Questions

• install xp instead of vista and now the recovery discs are not supported

  Pavilion Media Center PC m8000

  1. installed XP on my laptop on the desktop that had need of Vista by mistake
  2. ordered the HP recovery discs and now they are not supported
  3. Build confirmed IDS
  4. How do I remove the XP completely?
  5. Or should I forget it and try to activate the XP?

  Sincerely,

  A ding dong in denver.

  Hello

  I suggest to perform a new Installation, or if you have a recovery disk, you can perform the recovery of the plant.

  For more information, see these links:

  Install Windows XP:

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/install-Windows-XP

  Installation and reinstallation of Windows Vista:

  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista

  I hope that helps!

• Image recovery drive not supported by this model?

  Hey guys,.

  I still have the laptop HP G62-B18SA and its "Wireless is fine under Linux now, currently got Ubuntu in Wubi installation." I'm about to get Linux fully but only as a precaution when I got the laptop I did the backup to Disk Image of the system (4 discs DVD altogether), I tested the disc 1 today and he said that the recovery disk image was not compatible with my model? Now, excuse me if I'm wrong, but I thought that the disk image is a literal copy of windows, and all drivers that have been installed, etc., how is not compatible?

  Any help appreciated.

  Your recovery set should work regardless of the version of the BIOS. Do not touch the BIOS updates (are supposed to) that you have confirmed the info in the BIOS that the restoration of controls, is there. Unless the info is wrong.

  While you are still under warranty, I would get this problem fixed. HP will probably send the free value recovery because yours does not (they will not send a Windows disc). If the game fails, it will require repairs, which will be expensive outside of the warranty.

• camera raw not supporting the camera model file

  Hi all;

  When I try to open a. 5.5 PS NEF file I get a message that the camera model is not supported by the installed version of Camera Raw.

  Any ideas where I can get this upgrade?

  Thank you;

  Chris

  Hello

  Thanks for this information.

  Nikon D 7100 is supported by at least camera raw 7.4.

  CS 5.5 unfortunately has a maximum support of version 6.7 of camera raw, check here: https://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html

  See the complete list of cameras supported with the raw version respective camera here: https://helpx.adobe.com/camera-raw/kb/camera-raw-plug-supported-cameras.html

  So I think its time to upgrade.

  Or you can use DNG converter to convert your .nef images in DNG format, and use it.

  Concerning

  Jitendra

• We get "this brush format is not supported in Illustrator" error when you try to use brushes to adobe brush cc app.

  I created a few brushes in the new adobe application, but cannot use them in photoshop or illustrator as a result of the above error message. I tried to use the default arrows as well as does not (although the vector Brush, midtones and expandable arrow brushes seem to work in illustrator). Any ideas?

  The brush App supports styes brush 3 - Sketch, Photoshop, and Illustrator.

  Sketch brushes will not be supported in PhotoShop and Illustrator and will work in Adobe Sketch(currently available only for iOS).

  Similar with other styles.

• I need to see if I can upgrade this computer with Windows 7... I know that XP is not supported after 8/2014, then try to see if I can install Windows 7 on this computer.

  CPU Athlon XP AMD 3200 M +.
  448 MB of Ram

  512 MB memory PC2700 DDRSDRam

  200 GB at 7200 RPM
  ULTRA DMA hard drive

  DVD + R/CD-RW
  Player X DVD + R/RW double layer 8
  with CD writer capabilities

  CD ROM drive
  48 x max speed

  Integrated graphics with 64 MB shared memory
  video memory

  2.20 GHz processor speed, 512 Kb L2 cache,
  front of 400 mHz front side bus

  You don't have enough memory. The minimum is 1 GB, but most of the people recommend you at least 2 GB.

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

• How to change the resolution of the screen when the "input not supported" message after reboot

  I need to change the display resolution to 1600 x 1024 after I changed my 1900 x 1200.
  the problem is,
  the "input not supported" message when I reboot the PC and does not allow me to do anything.
  He presents himself before the logon prompt.
  I restarted to fail safe with the command line with the id of the administrator and was able to change the resolution, but
  He returns to the State ("input not supported" and no prompt connection) after I restart the PC

  Mark,
  Thank you for your help,
  I tried in vain,
  I just used another monitor with a higher resolution, restore the previous resolution and swap the monitor again.

  Kind regards

  Claudio.

• DVD player does not support 8cm DVD discs?

  Hello

  My dimension 5150 has a SONY CD-RW/DVD CRX330E, it does not seem to recognize the 8cm from my sony handycam DVD, I get the message "insert disk". 8cm discs are not supported by the player? The drive works fine for the standard size DVD.

  Thanks in advance!

  Kirsty

  
  

• my all-in-one does not launch the analysis of e-mail Wizard. This option is not supported

  Is it possible to start the wizard for analysis by email on this printer? I am able to analyze then send a page without using the wizard.

  Jim,

  Sorry for the confusion of scan to e-mail is not supported with your model... Here's one that States of the user guide.

  For scanning to e-mail, Fax E-mail

  Note:

  If you use the HP Officejet Pro 8500 a (A910a-f), you can only use the scan to

  Network and Fax folder in network folder.

• My HP Deskjet 3051 a does not support print applications?

  I just bought my printer and connected to the HP ePrint center and found that there are apps like my smartphone!  But when I look at the application and select Add to the printer, nothing happens.  Is it because the apps are not supported on my model? Thank you.

  Hi Carmic1975,

  Your printer model supports all functions ePrint, with the exception of the apps.  The printer supports the quick forms, but it's the only application that the printer can support.

• Error message: Windows Media Player could not complete burning because the disc is not compatible with your player...

  I have one of the same type of disc engraved the other day without problem. Tried to burn a CD today the progress achieved 99%, then I got the error message. Windows Media Player could not complete burning because the disc is not compatible with your drive. Try to insert another type of recordable media or use a disc that supports a write speed that is compatible with your drive.

  Hi David,

  Thank you for giving us the opportunity to help you with this problem.

  According to the problem description, you were not able to burn a DVD with Windows Media Player.

  You get the error that the disc is not compatible with your drive.

  Let me ask you a question.

  (1) what is the type of DVD or CD you want to create?
  (2) don't you make changes to your computer before this problem?

  I would suggest a few troubleshooting methods. Run the Windows Media Performance troubleshooting tool and follow the steps in the link to burn a CD or a DVD.

  Method 1: Run Windows Media Player Performance convenience store.

  Please follow the steps below to do so.

  (a) key Windows + W keys on your desk.
  (b) write the Troubleshooting in the search box in the upper right.
  (c) select the Troubleshooting option after the search.
  (d) select the option of Performance of Windows Media Player .
  (e) click Next to perform the resolution of the problems of performance of Windows Media Player and follow the steps.

  Method 2: Follow the steps in the link here and burn the CD or DVD.

  Burn a CD or DVD in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-8/burn-CD-or-DVD-Media-Player

  I hope that solves your problem. Please feel free to write back to us, if you are facing any problem related to Windows.

• Photoshop 7.0 installation disk download not supported

  I have an installation disc of Adobe Photoshop 7.0 with the license of my previous company.  However, I have a new 2012 Macintosh computer that no longer supports the old installation disc (PowerPC not supported).  I do not need to buy the new product for the old version is perfect for what I need.  Is it possible that I can install this latest older software on my laptop?

  N °

  You will need to either buy Photoshop elements 14 or join the Cloud and get the Package of photography.

• CS4 won't open the files to an external hard drive. "not supported format or corrupted file?

  Hello

  I'm having a certain hard using first but the passage between different computers.

  So I created a project on another computer, in which I put the video files that are located on my hard drive (external). I saved the project on the same hard disk. Realization of my project, I noticed that creates the first "preview files" in a separate card.

  I got a new computer in which I put the 2 GB of ram necessary for myself so I could work at home. BUT when I connected my HD on my computer and tried to open the project, the computer said one of the preview files were missing. No big surprise, so I'm going and find the file. Click on it, but then it says:

  "not supported format or corrupted file", which is absolutely B * llshit because the Prime Minister created the file itself?

  In addition, all media, I imported in the left part of the screen of the user (not sure what you call) IS 'off CONNECTION '. It gets weird, because when I try to find the media using FIND in first, not all the files SHOW UP?

  Im getting quite nervous, because I need it to work hard enough

  Maybe its helpful to mention that my new computer is a complete novice blown [no internet connection, does not sound again: I just installed Service Pack 2] and maybe I'm missing some drivers?

  Please, please help me I'm wasting enough it actually...

  Thank you

  Jef

  Jef,

  Open the CS4. Create a new project and when you get the sequence settings screen, are selectable AVCHD, HDV, and XDCAM presets?

  If this isn't the case, you are using the trial version, or your full version has been restored to the status of the trial. The trial does not support anything MPEG, even when encapsulated in AVI format.

  If you have the full version which is returned to the status of first instance, follow these steps:

  1. disable

  2 uninstall

  3. run the Script own CS4

  4 reboot

  5. Repeat steps 3 and 4

  6. Repeat steps 3 and 4

  7 install

  8 activate

  9. turn to update to 4.2.1

• Portege 4010, HID not supported

  He finds the mouse OK but fail to complete the installation.
  I get "Human Interface Device (HID) profile is not supported in this configuration" when I try to connect my MS IntelliMouse Explorer for Bluetooth. I have the latest version of the software of Toshiba (SD) and battery on my Portege 4010. Using the USB MS Bluetooth dongle on another computer (of office) everything works fine.

  Hello

  Maybe this site will help you?

  http://APS.toshiba-tro.de/Bluetooth/

  There are troubleshooting costs and info.

  Bye Bob

• ZumoCast and Bionic files not supported.

  ZumoCast is installed on my Win7 PC and my Bionic. I see most of my a lot with the Bionic files but when I try to view the files in the player the screen goes all black, as it tries to read the files but nothing ever happens.

  Then when I press the back button, I get this msg "Error during video playback" ZumoCast was not able to read this file. He could not be in a supported format.

  I also get this msg the application ZumoCast (...) has stopped unexpectedly. Please try again.

  I tried these video formats

  . MP4

  .avi

  . MPG (not supported)

  .mkv

  When I try to play music files, I get the album art is displayed but after a long wait nothing happens then it starts to jump,.

  jump tracks due to the streaming media server error

  Update... I got a song to play!

  Any help on this would be appreciated.

  I already went to manage apps and deleted the data and signed in.

  Did you guys do the update of the server Zumocast?

  Maybe the u/d screwed something up.

  RMDo