Reboot hp laptop friends g61

Similar Questions

• HP G61-429 WM: USB FOR laptop HP G61-429WM

  Could you please tell me if I can use a Lexar 32 GB jumpdrive USB 3.0 on my laptop HP G61-424WM.

  Thank you

  Hello

  Yes you can, you can use one of the 3 ports on your laptop, even these are all USB 2.0 ports.

  Kind regards.

• When I try to reboot my laptop (toshiba Windows Vista) displays a black screen and now I can not it reboot. It says bootmgr missing. What should I do to restart?

  Can someone help me please! When I try to reboot my laptop (toshiba Windows Vista) displays a black screen and now I can not restart. It says systeminst9.wnm is missing. What should I do I restart yo?

  Hi Ashutosh,

   
  You did changes to the computer before the show?
   
  This error indicates that the boot sector is corrupted or missing.
   
  I suggest for the link and follow the steps in the article:
  Windows error message «Bootmgr is missing Press Ctrl + Alt + Delete to restart»
  http://support.Microsoft.com/kb/2622803
   
  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
   
  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• How can I get an another vista disk to reboot my laptop

  Hi all

  I had a system crash about a year because of a virus and a friend wiped my laptop and installed xp saying it was better than vista.

  However, I had nothing but bother with him for about 6 months now, it's just doesn't work the same and of course I can't update the system either.

  I hunted for the vista disk provided with the laptop but I can not find them anywhere and it will cost me a small fortune for a store to reinstall vista for me even if I have my product key.

  Is there anyway that I can get this disk from toshiba or Microsoft to reinstall?

  Thank you
  Ang

  Hello

  > Is there anyway I can get this drive of toshiba or Microsoft to reinstall?

  You can get [Recovery disk | https://backupmedia.toshiba.eu/landing.aspx] Toshiba, but for the money about 35 euro

• Computer laptop HP G61-336NR not stop install updates

  I have restored my HP G61-336NR laptop to the factory setting and now it continues to flow upward with 125 or more updated and it will not stop.

  Hey mygirltan,

  I see that you have a problem with the updates on your laptop.

  I'm assuming that these "update" are updated Microsoft, you're talking about. Right?

• Replacing motherboard computer laptop friends and Windows 7

  I am trying to replace a very faulty motherboard on the Acer Aspire 5736z laptop from a friend and I'm worried if it will activate windows 7 properly, the motherboard is the same as defective. Given that the license key is at the bottom of the laptop, I guess that windows is reinstalled on the machine. My friend has insufficient funds to get a new copy of Windows 7.

  If this is a defect and that you are able to get an exact replacement, it must activate. You can still use the phone activation;

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Firefox said I need to update my Add ons and plug-ins at startup after rebooting my laptop

  I'm running 10.0.2 and I get several tabs when I first launch firefox saying I need to install Update Add ons. I go through each one and click Add and then restart firefox and everything is fine. later, when I turn my laptop back and then start firefox I get the same message. Firefox is not save or recognizing the add ons that have already been installed. What should I do to fix this?

  If you cannot disable this feature in the program, try Bitdefender forum.

  • http://Forum.BitDefender.com/index.php

• M100 satellite disk restore will not work, keeps on rebooting the laptop

  Hello

  I have a M100 I need to restore to out of box state. XP is running too slow and after getting some internet pop ups of facebook, the laptop is having issues.

  Now, I tried to run the program of restoration of the drive and it happens with ramdisk boot, then the f6 press to install an aditional drivers, then wait.
  The mouse cursor appears on the screen and it can be moved around, then the laptop restarts just.

  I tried this several times and with main power and with and without the battery while on the grid.

  I suspected it was a problem of hard disk or a boot sector virus, which prevents the program of restoration of the race. However, I tried a new hard drive and it still does the same thing.
  I changed the RAM and still does not. About a year or two ago I had to restore the laptop as the HARD drive died and I replaced it with another hard drive on a different Toshiba laptop and it worked fine.

  Any help would be greatly appreciated as I need this laptop for school

  Thank you

  Hello

  Sorry, but one thing in this story is strange. Why load additional driver?

  If you want to have out of the box to install OS, you must use the Toshiba CD/DVD facilities sent. Using this disk, you do not need to load anything, just start the recovery procedure, let it run and when you're done just restart your laptop. That all s that you do.

  So, if you have this original Toshiba drive please do as follow:
  Start your laptop and press F12 repeatedly
  When the boot menu appears recovery disc into the optical disc drive
  In the list, choose the CD/DVD device and press ENTER
  Follow the menu on the screen

• Need to reboot my laptop each time to get a sound.

  Hello
  I had a problem with the sound in the operating system Windows 8 (hP G60 model)... Device drivers are installed correctly... !! I have to restart my laptop every time that happens the problem... If I restart the laptop, sound works well... !... I have no idea why its sound not coming when I switch on laptop first. ! whenever I need to restart the laptop for her. ! Another problem is that if I did not use the laptop for 15-20 min he goes to sleep mode and when I used back - same problem again face.! ... I need to install any drivers? Requires?... Please help me... Thank your for your help in advance. !!

  Hello

  One thing to check is the following.

  Open windows control panel, open Windows Update, select "View update history" in the left pane and then select "Installed updates" link in the next window.

  Locate the KB2962407 update, right click and choose uninstall.  Once completed, restart the computer, open windows control panel, open Windows Update and select "Check for updates".  You will see the update that you have uninstalled just offered once again - right click and select "Hide update".

  When windows has reloaded, you may or may not need to use the Recovery Manager to reinstall your original Audio driver as it is stated in the document at the link below.

  Recovery Manager - Windows 8.

  Kind regards

  DP - K

• Dead laptop, HP G61-406SA

  Laptop will not power no LED, no hard disk or fan activity. Do hard reset, connect the adapter, get the power LED only, which turns off, when power key. Reinstall the HARD drive modules and memory. Always feed

  Download 19.7V adapter. Get 3.38v however, the connectors of the battery in the laptop when plugged adapter.

  Send in your computer for repair

• screen of laptop HP G61-631 NR says "Bootmgr is missing".

  You use Windows 7, the display shows "Bootmgr missing", how can I fix this problem?

  Hello

  Try the following.

  If you do not, use another PC to create a rescue CD Windows 7.  Download the ISO relevant among the links below - if you are not sure of the version, try the first 64 bit option.

  Windows 7 32 bit

  Windows 7 64 bit

  You must use an app like ImgBurn ( Note: you can deselect additional software during installation of ImgBurn options) to burn the ISO to a CD - a guide on the use of ImgBurn to write an ISO on a disc is here.

  When creating, type following the ESC key as soon as you start the launch of the laptop Boot Menu, and then insert the rescue CD.  Select boot options (usually f9 ), use the arrow keys to select the CD/DVD drive and press ENTER.  You can also get a prompt to "Press any key to" continuous - it if requested.

  Select the "repair your computer" option and follow Option 2 in the guide on the link below to run the startup repair - you may need to run this 2 or 3 times.

  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  If the above does not help, take note of any error message you get during the procedure and include them with your next post.

  Kind regards

  DP - K

• How to reboot my laptop?

  Please tell me how to reboot my computer? Thank you!

  Hello

  Reset means restart.

  If he is locked up try holding the power button for 10 + seconds.

  I hope this helps.

• I downloaded the same program 3 x today, rebooted my laptop... can't program here. Why?

  Windows XP, computer older laptop was acting strangely.  I can download a program; the program works.  Turn off the laptop and no longer have the program.
  Why?

  Where is stored the program?

  If you have a corrupted user profile, and then whenever you log on, Windows creates a new, temporary profile.  When you disconnect, the temporary profile is deleted and any files you have stored in this profile during this session.  The 'profile' would generally include files stored in C:\Documents and Settings\. (Including in 'My Documents')  A test for this condition would be to open a session as long as different user (create a new user if you have only one).  If this problem does not exist when logged in as a different user, can suspect a corrupted user profile.  Recovery is not too difficult.  Choose among the following:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  "Windows XP problems if your profile is corrupted"
    <>http://support.Microsoft.com/kb/326688 >

  "How to copy data from a corrupted to a new profile in Windows XP user profile"
    <>http://support.Microsoft.com/kb/811151 >

  Corrupt profiles are almost always accompanied, if not caused, damaged drive.  After recovery, perform an operation of "chkdsk" with the /F or/r option to check a file system of the damaged disc.

  "How to perform disk error in Windows XP check"
    <>http://support.Microsoft.com/kb/315265 >

  Another possibility is that Windows 'Steady State' has been installed on your machine.  If this is the new behavior, then this is unlikely.

  HTH,
  JW

• I can't reboot my laptop. (0x000000f4 error)

  When I try to restart my laptop I get this blue screen with the following error message:

  STOP: 0X000000F4 (0 X 00000003, 0X8609D408, 0X8609D554, 0X81E35650)

  I can't seem to start little matter what I do. I tried all the security modes, reconnecting the cords, and nothing works.

  What can I do to fix this?

  Thanks in advance.

  Hello

  If a PC remove all power to the system:

  Check and reinstall the cards, memory and actually delete and replace - cables (at both ends) are not
  just tight. Memory could be the problem, so if you have more than 1 stick swap them in and out of
  see if the problem follows a stick or try the new memory.

  --------------------------------------------------------------------------------------------------------------------

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  ================================================================

  BCCode: F4 0x000000F4

  Check and reinstall the cards memory and cables (at both ends where possible) actually remove and
  replace - do not just tight. On a laptop computer on all you can do is reinstall the memory and possibly check
  the contacts/connection to the hard drive. Memory could be the problem, so if you have more than 1
  stick swap them in and out to see if the problem follows a stick or try the new memory. Antivirus/anti-
  spyware/security programs have been known to cause or have a role in this matter.

  More general patch updates day and low level chipset BIOS drivers and other software to control.
  Also check the wiring on the hard drive.

  BCCode: F4 0x000000F4<-- read="" this="">
  * 1241.html http://www.faultwire.com/solutions-fatal_error/A-process-or-thread-crucial-to-System-Operation-has-0x000000F4-

  --------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes and displays information about all accidents of a table.
  Free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
  However, there are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Does not work
  tell all possible driver issues).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Laptop HP G61 page is vertical instead of horizontal

  My daughter was on my laptop and asked why the screen is now sideways!

  The screen vertically and not horizontally.

  Can someone help me fix it please.

  This may not work with all PCs but now try press CTRL, ALT AND arrow pointing UPWARDS at the same time and wait a few seconds. On some PC the CTRL-ALT-RIGHT to reactivate the screen video sideway. Press and hold these three keys CTRL - ALT-(and a direction of the ARROW) the screen will turn accordingly.