Computer laptop HP G61-336NR not stop install updates

Similar Questions

• upgrade to adobe reader 11.0.12 not stop install. can't stop iMac.

  upgrade to adobe reader 11.0.12 not stop install. can't stop iMac.

  Hi Sylvia,.

  Are you still facing this problem?

  Kind regards
  Rahul Tyagi

• I have a problem loading Illustrator CS4 on a second computer (laptop). It does not recognize the number, saying: it is not valid. [was: ochre]

  I have a problem loading Illustrator CS4 on a second computer (laptop). It does not recognize the number, saying: it is not valid. Any suggestions on how to have the serial number recognized would be appreciated.

  Please see: error of incorrect serial number

  I hope this helps.

  Concerning

  Megha Rawat

• Can I install Adobe Acrobat 8 on the new computer laptop if it is not possible to deactivate on old PC?

  I have Adobe Acrobat 8 Professional that I installed on my PC in 2007. My PC has renounced the shadow and the shop where took to a now destroyed the hard drive for me, so I can't disable the software before installing again on my new laptop which has Windows 8. The shop seem to have copied the file shortcut to the new laptop, but nothing else. Can I reinstall without disabling the previous software?

  You may be able to make it work. If you have a 64 bit system, as many are today, then you may have more trouble.

  If you need to adjust the activation, it is something that must be done with Adobe directly. Two facilities are generally licensed for every copy of Acrobat you have, so you can have a left.

  Suppose you manage the installation. The first step is to install the updates (especially for a 64-bit system). You may be able to make updates in the Help menu (assuming that Acrobat opens). If you need to install manually, go to http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows and install updates in the order. To download from the most recent backwards, because each update tells you the previous update required for installation. In general, just restart after the update.

  To test your system, first check the features of Acrobat and Distiller programs by selecting from the menu of programs (or the Metro interface). If you have a PS file available, check the processing of this file by Distiller to check on the creation of PDF files. Then, try to print from an application to the Adobe PDF printer. If it works, fine. If this is not the case, try a print to a file and open the file in Distiller to create a PDF file. If the printing process is running, then try to WORD or other product of MS that could have the PDF Maker inside. See if you can create a PDF from this application. The only way to know for sure to try it. Adobe does not certify AA8 for Win7 or Win8 as it was not tested. For Win7, several people have reported success.

• Network management problem, computer laptop Windows 7 will not find other computers on any network, however all other computers on the network can access Windows 7 laptop.

  Basically, the issue I'm having is that my laptop does not connect to any other computer to access the actions or other files.  Other computers on the network can access my computer laptop shares and files without any problems.  Operating system is Windows 7 Home Premium x 64.

  What I tried:

  restarted
  uninstalling and reinstalling the files and printers, sharing maps and restart after completion
  all disabled firewall
  tried with IPv6 enabled and disabled without change, so it is currently enabled
  tried on a Wi - Fi and the differences are listed below in the section work (work is wireless)
  able to ping other comptuers
  access to other computers is permitted by other computers

  problem extends over several networks, IE I noticed it at home last night and the followed problem my laptop at work this morning.
  The problem is slightly different on the two sites.

  At home:
  I can see the other computers on the network, but I am unable to access it, even if I have permission, but other computers can access to my laptop.

  At work:
  Cannot even find other computers on the network but they can find and access my laptop.

  I have worked on this problem of non stop for several hours and did much more than what is said, but I am unable to remember everything.  I should have been taking notes: P

  Here are the results of the ipconfig/all command (I removed the physical addresses for security reasons):

  Windows IP configuration

  Name of the host...: Radiation-G72
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Wireless Network Connection 2 wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft Virtual WiFi Miniport adapt
  Physical address.... :  **
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. : hsd1.ga.comcast.net.
  Description...: Realtek PCIe GBE Family Controller
  Physical address.... :  **
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :
  ... Description: Atheros AR928X Wireless Network adapt
  Physical address.... :  **
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::f4e3:cd1c:6952:eb4d % 11 (Preferred)
  IPv4 address: 192.168.2.7 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: Thursday, February 4, 2010 10:50:32
  End of the lease...: Friday, February 5, 2010 08:29:36
  ... Default gateway. : 192.168.2.1.
  DHCP server...: 192.168.2.1.
  DHCPv6 IOOKING...: 234890707
  DHCPv6 DUID customer...: 00-01-00-01-12-4C-6E-91-00-25-D3-3D-FC-9A
  DNS servers...: 192.168.2.1.
  NetBIOS over TCP/IP...: enabled

  Tunnel adapter isatap. {1797D168-6FC8-4DDF-8338-4E214119C26D}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft ISATAP adapter
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Teredo Tunneling Pseudo-Interface:

  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  IPv6 address: 2001:0:4137:9e74:4ea:2920:b81a:cdc5 (Preferred)
  Address IPv6 local link...: fe80::4ea:2920:b81a:cdc5% 13 (Preferred)
  ... Default gateway. : ::
  NetBIOS over TCP/IP...: disabled

  Card adapt 6TO4 tunnel:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 card
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Asked this question in the Windows 7 forum also because the problem was between windows 7 and Vista.

  Hello

  If it has started, you can try a system restore - an update "might" have caused the problem.

  1. try a system restore back to a point before that happened. And immediately thereafter enter
  Control Panel - Windows updates - top left settings and set it to download and informs you instead
  Automatic. Leave it until you are sure that everything is OK and then you can add them one at a time
  to troubleshoot BUT click right on and HIDE all the driver updates. Also stop at day of drivers like below
  and let this value - manually search for drivers when you think you need. (See how and why to)
  stop day of drivers below.)

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  To uninstall an update if you determine that there are problems - Panel - updated Windows - down left-
  Updates installed - uninstall

  I had completely forgotten the system restore!  While looking into the system restore, I found that when I moved into my new House and has cable Internet installed, the cable technology installed a program of comcast on my computer.  This caused me to not be able to connect with other computers.  After rolling back to install it before it works!   Thank you.

• Computer will not properly install update KB976098 + new software

  I was a lot by browsing this site and saw that many people is facing the same problem. What I did find was a person with software problems.

  My computer was purchased 26/11 this year with Windows 7 pro + Microsoft office home and student . One day Windows were 27 updates to install and therefore has been left overnight. In the morning update no. 27 was still install and never finished. Had to restart the computer to exit the update screen. days later there were 4 updates to install. Still once, the last update was never completed.

  Now, there's only 1 update important remaining, KB976098 , the fix for the time zones that I presume.

  Not only the update will not install, now the new software may not be installed properly:

  I tried some actions (such as downloading stuff, install software, games) while windows tried to install the
  Update:

  • During the installation (for example.) Adobe Reader, Comodo FireWall took more than a minute to display its notice of default on an attempt to install software on the computer and therefore compromised the initial installation.
  • Turn off Comodo Firewall does not solve the problem. Delay of the computer respond when an action of the instalation was performed is the same.
  • The installation of update process could not be stopped once he was "installation."
  • The icon of 'disable' had no notification "update", but once to close the office and displays the message "loging off", the computer is never extinguished.
  • While playing an online game, nothing unusual has happened, no delay on start-up or exit.
  • When you save things like a packadge power point (for conferences of 2007 to display on older versions) the application would freeze and the package has never been created
  • Presentations PowerPoint would have graphics errors, such as the black and white rectangles containing all movable objects.

  After Force-reboot of the computer, cancel the auto-update feature and remove it from the list self-install, I retested evevrything:

  • Adobe Reader has been installed successfully, even with Comodo Firewall active
  • Comodo Firewall has reacted instantly to any attempt installation
  • More online games the same
  • PowerPoint correctly displays images and created packages without error
  • Turn the computer off was possible without forcing the stoppage.

  Now, I'm checking the updates installed and found out there are only installed 23 (in the Control Panel installed updates ). The history of the update displays more than 74 update. As mentioned previously, the first batch of update contained 27 updates, No 23 or 24. I checked some of these updates to the story:

  • There are a few updates, eg. update of security for microsoft office system who have 10 diferent KBs (being the first of its kind, his last KB974234 KB936514). Five of them have been installed twice: KB936514; KB951944; KB954326; KB956828; KB960003

  I guess in these 74 updates, replacents occurred in 23 updates, and some are not microsoft partners to be included in the Panel of installed updates . I really don't know, that's why I am asking :D

  I tried the more possible ways to install the update, downloading it mannualy, disabling the firewall, close all other applications, etc. etc...

  I would like to know the following:

  1. Why is not install update KB976098?
  2. Why other users have the same problem with recent updates?
  3. How to prevent the installation of update if the stop command does not work?
  4. How can I turn off the computer without having to install the downloaded update?
  5. Are double downloaded updates a problem?

  I wrote this for so long now. If I forgot anything, the question might be already in the text.

  Thank you for your time and patience! :)

  Read the "Updates since the previous cumulative Windows time zone update" section of http://support.microsoft.com/kb/976098. If you do not reside in one of these 14 zones, really useless this not (IMHO) security-related update, so you can just "hide":

  1. stop the automatic updates service:

  Start > Right click on run , and then select run as administrator > services.msc (type) > [OK]
  Double-click automatic updates > click stop
  (Stopping the service will take a moment)

  2 remove the contents of the download folder:

  Start > Right click on run , and then select run as administrator >
  (type or copy/paste) %windir%\SoftwareDistribution > [OK]
  Open the download folder and delete its content
  Close the window.

  3 start | Control Panel | System maintenance and (if you use Classic view, skip this step). Windows Update: Select the installed updates: right click on the Update for Windows 7 (KB976098) | Click hide update | Confirm the prompt UAC (User Account Control), if any, & OK your way out.

  4. start the automatic updates service:

  Start > Right click on run , and then select run as administrator > services.msc (type) > [OK]
  Double-click automatic updates > click Start
  (Stopping the service will take a moment)

  =====================================
  To restore/show updates in Win7: Start | Control Panel | System maintenance and (if you use Classic view, skip this step) | Windows Update | Restore hidden updates: Find and select the update you want to install. Click restore. You can now select once again it and install through the normal process.
  =====================================

  Comment: For some reason, a lot of Win7 users have had problems trying to install KB976098. for example, http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/b620bb51-11e9-48f4-9a45-4034498cb8e1

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Computer laptop Windows XP does not start? Help

  Hi I have a windows xp laptop I think that their system eis or something like that... Whenever I start the laptop, he's going on the error you get when your dosent laptop shut down correctly. If I click on start normally the bar will spend about a quarter of the way and then just stayed forever and only safe mode also gets a freeze from then. Y at - it something wrong with the laptop or what. How can I get my laptop to work again... someone help me please.

  It is up to tell you to us what brand of system and the model is... not "system ist or something like that."

  When you choose to start safe mode and you can see all the stuff being loaded and the system crashes, which is the last line on the screen to say?

  If you attached an external equipment, especially USB devices, disconnect everything and then you can see if things seem better.

  If you get an error message windows system config, exactly what he says?

  No error paraphrased messages please!

  It was something like this:

  Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM

  Which usually indicate some sort of corruption of system files may be a loss of power, aborted reboot or abnormal termination? (This includes the plug pulling, buttons power and removing the battery).  None of this seems familiar?

  If you can boot from a CD, you can create a CD bootable XP (no XP media required) Recovery Console and run chkdsk with correction of errors on the afflicted to start System.

  Here's how:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget what you have (no XP media required).

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD (do not install UniBlue or the Ask Toolbar - never!):

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• computer laptop Windows vista may not start

  I have a laptop windows vista that can not boot up to windows

  1. when I on the laptop, it loads a black screen with 5 choices
  1. safe mode
  2 network in safe mode
  3
  4 last configuration:
  5 launch the window normally
  I tried to enter in all of the choices of 5... whatever choice I go, the laptop will just keep loading and loading and loading forever bar and I waited 15 minutes and finally the computer laptop 1 blue screen flash and it has restarted and it loads again to the black screen with 5 choices
  No idea what can do with him?
  Please help me.
  Thank you

  Hello

  ·         What is the full error message?

  .         Were there recent hardware or changes to the software on the computer before the show?

  I suggest you to remove the devices connected to your computer (except keyboard and mouse) external and check if you can start the computer.

  Method 1:

  You must disable the auto restart in case of failure system on your computer and note the error message receive you on the blue screen and you need to post back to us.

  To do this, you must start your computer on the Advanced Boot options , and select Disable automatic restart in case of system error.

  Follow this link provided below to start your computer in Advanced startup options.

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Method 2:

  Follow the steps in the article, and check if that helps.

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly

  http://support.Microsoft.com/kb/958233

  Method 3:

  If you have Windows Vista DVD you can try running the Startup Repair and the Tool of diagnosis of Memory Windows to check and Windows Recovery mode if it helps.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Alternatively, you can use the command prompt on the recovery mode windows to perform analysis and error correction on a drive letter of your choice by running "chkdsk x:" where x is the letter of your drive. Type the below command on command prompt, and then press ENTER:

  X:\>chkdsk/f

  /F Corrects errors on the disk

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

• computer laptop Windows 7 saves not CD / dvd

  my computer laptop windows 7 is no recorded any cd / dvd... Ive checked everything on my computer and online, but couldn't find a solution! does anyone else have this problem? If so how do solve you this problem? Help, please...

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and

  
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Laptop will not stop after update to 8.1 windows

  I have a new aspire E1 - 572G that will not stop completely during a windows 8.1 update

  I updated the Bios and downloaded the drivers from the support site.

  I did a restore to factory default settings and tried... again no luck

  I installed windows 8.1 after installing the updates for windows al.

  I'm not left how to solve this problem!

  Any suggetions are welkom.

  Found! Why are there two displayadapters in this notebook?

  I removed the intel one and rebooted. Windows dectected the displayadapter of intel again... problem solved!

• Computer laptop Pavilion dv6 will not work

  Hello, I have a computer laptop Pavilion dv6 with product number QE023UA #ABA. It works under windows 7.

  So I was just playing and my laptop turns off suddenly as if he had run out of battery life. But he is in CHARGE. I didn't know what happened, so I just pressed the power button and nothing happened. I pressed it again but longer, still nothing.
  (btw, I use an extension) I thought something was wrong with the plug, but nothing was wrong. I heard a strange noise coming from the ac cable. That is what happened: Advanced... Tip... Tip... Tip... Tip... and so on. I tried to remove the battery and put it back in, but that does not solve anything. None of the lights are on. I don't know what to do more and I am looking for help.

  Sorry if my English is bad.

  The problem is solved, but thank you for responding.

• Pavilion dv2415nr laptop. It will not stop. I downloaded the software and it will not turn off.

  I have a laptop dv2415nr Pavilion and it will not turn off.  I recently downloaded some security software and it is not stopped since the download.

  Hello

  I recommend that you make sure you have your license key for webroot. Uninstall the software and reboot. If that solves the problem, it's time to go to the Webroot support and ask their tech support that it.

  Kind regards

  ERICO

• computer laptop Sony vaio does not connect to internet

  Any help, my computer laptop vaio does not connect to the internet, wireless or lan help!

  Hello Alex,.

  Welcome to the community of Sony.

  Try to run all the steps mentioned here t solve the problem of Internet connection on your computer: http://community.sony.com/t5/VAIO-Networking/my-sony-vaio-always-cannot-connect-to-the-internet-some...

  Note: If my post answered your question, please mark it as an "accepted Solution".

• The KB2833941 could not be installed/updated on my laptop. Error code is 0 x 643. Please help me solve this problem. Thank you!

  The automatic update and the update manual impossible to install/update on my Toshiba Tecra M2 KB2833941 about 6 times since July 10. The error Code is 0 x 643. I couldn't solve it by myself. Please kindly help me to fix it. Thank you!

  Download and run the Microsoft .NET Framework repair tool , then visit Windows Update and let it try to reinstall updates. Once it's done, scan again with Windows Update to ensure that they properly installed.

  If this does not fix it try this...

  Uninstall the .NET Framework 1.1. Then download the .NET Framework Cleanup Tool
  In the drop-down list box, select 1.1 and clean.
  Reinstall .NET Framework 1.1
  Download and install. NET Framework 1.1 Service Pack 1
  Visit Windows Update or Microsoft Update and let it install the rest of the 1.1 updates, including KB2833941

  I would like to know what method worked for you.

  Ref: http://support.microsoft.com/

• Failure — CPU fan comes on full blast when the computer is running. Will not stop unless the computer is off

  Fan comes on full blast when the computer is running. Won't stop unless the computer is turned off, or in low power state. Tech has replaced the fans, problem resurfaced after computer tech left. Everything else seems to work very well. Dell XPS One (all-in-One), Intel Core 2 Quad CPU, Q8200 @ 2.33 GHz, 4 GB RAM, OS, Vista 32-bit

  I suggest you get back the Tech to fix it properly this time, because they have replaced the fan.

  Or try Dell Support/Forums:

  http://support.Dell.com/

  Dell support at the link above.

  http://en.community.Dell.com/support-forums/default.aspx

  Dell's Support Forums at the link above.

  See you soon.

  Mick Murphy - Microsoft partner