Reboot Loop/No Boot - Alienware 17R3 - amplifier with Asus GTX 1080 Turbo graphics

Similar Questions

• Anyone with a GTX 260 HP graphics card

  My HP Elite 090a is not new and I just realized that the GTX 260 card is running under nVidia card Core @ 576 Mhz Shader 1242 Mhz @ and @ 999 Mhz memory.

  Mine are 518, 1080 & 1008, that I wonder if it is because HP had so many complaints of noise that they strangled the card.

  If you have this card of HP could you tell me your readings

  Thank you

  David

  I would say that I have solved the problem! and for those who descend from the same track here is what I found.

  The card isn't nVidia has designed! the card goes down when not to complete task, if you use a single monitor, then it will tell about 300 Mhz (2D by default) when using a dual monitor default is the minimium 3D which is 518 Mhz.

  As the times mentioned previous, well I think that could have me mucking around with Rivatuner. the reality is that I played COD4 MW and Crysis Warhead maxed out entirely (1920 x 1080) and temperatures did not exceed 73, in fact the map has not sufficiently taxed from its default of 518 Mhz increases the speed of the fan to cool the card and it seems that my i7 CPU is a lot of work, but not enough to cause any concern.

  My HP is a HPE - 090A right now I can say that I am a very happy owner.

  Thanks for all your comments and help

  David

• I have installed winxp sp3 on the Intel computer, at first that my computer is stuck in a reboot loop

  At first my computer intel was blocked in a reboot loop, then just the black screen with cursor.

  I could never establish safe mode! I don't have a recovery partition.

  Hello

  Step 1: You can try using disable automatic restart on system failure option and check if you get the error message. If you get one, then return the exact error message.

  a. restart the computer.

  (b) that the computer restarts, press the F8 key repeatedly until you see the Windows Advanced Options screen.

  c. use the arrow keys to select disable automatic system error rebootand press ENTER.

  Step 2: Reinstall Windows XP.

• (Redirected) ALIENWARE AREA 51 AND GTX 1080

  hi, do you know if in the future there will be the opportunity to buy the Alienware Area 51 already with the GTX 1080 ? ( single double or triple )
  

  Best of this post in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• Pavilion dv6636 stuck in a reboot loop with no boot

  Hello

  I have a Pavilion dv6636 purchased on Oct / 2007 which saw a reboot loop with no boot. By pressing the Start button, I can see the hood leds on, power on (as well as the port for illuminated around blue AC adapter), HD led being turned on once and can hear the pilot DVD is powered and the fan turns, then, after about 10 seconds (while the screen is always black), he stops, remains off for 5 sec , then restarts, stuck in this loop. Experiences I've already done:
  -hard reset
  -reset of memory
  -stable memory locations
  -exchanged memories
  -started with memories (sounded a beep as expected)
  -had started with HD (continued with the same symptoms)
  -F8 or F2 keys pressed during startup (black screen and continued with the same symptoms)
  -F10 key during startup (by pressing F10, it does not shut down as usually does, but rest died, with black screen and rotation of the fan)
  -external monitor plugged in when you start (black screen and continued with the same symptoms)

  Same question occurred in about 4 months ago, but at that time, after break of a week I tried to start and has been a success. Not at the moment.

  Please, any thoughts of what could be the problem?

  Thank you

  Hello Emmanuelle,

  sounded pretty good!

  I got and my laptop is working normally after failed BIOS by following the steps you suggested.

  Now, I have updated the BIOS by the F32 (current release) version and is running successfully.

  Very well.  Thanks about.

• The update of Windows 10 1511 reboot loop Bootcamp BSOD ACPI. SYS

  It is a copy of my thread to http://answers.microsoft.com/en-us/windows/forum/windows_10-performance/windows-10-update-1511-reboot-loop-bootcamp/8653... as I was asked to post here by the Microsoft Support Engineer.

  Hello

  Friday night, I went to bed with a working machine. I had a late 2013 Mac Pro BootCamp running with a Windows 10 Pro installed, the Build version before 1511.

  On Saturday morning, I woke up to my PC restart itself over and over again. It seems that Windows Update has decided to put a new version of Windows 10 on my machine without my knowledge. I discovered this after restoring an acronis backup (which took a few hours because of the number of incremental backups)

  Occasionally (about 1 in 20 restarts) it would blue screen with an error:

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED (ACPI.sys)

  But the rest of the time he would just start, flash a window for a millisecond that says (I think) winlaunch.exe, then restart.

  I tried a lot of things to sort it, including:

  (1) restore from a backup, acronis to Friday morning, running sfc/scannow, and then runs the update

  (2) the creation of a recovery USB, enter the console, change the boot to legacy method, so I can F8, then goes into all security modes and mode of illegal product, but I can find where windows 10 now puts the boot log

  (3) restored from acronis, switched to mac, created a new bootcamp drivers usb, switched to windows and run the option 'fix drivers' before performing the update.

  Ntbtlog.txt is not anywhere on the partition. I ran a dir /s > a.txt then open this a.txt in Notepad and searched him.

  I don't know where to go from here. I can acronis restore of a windows 10 work machine the morning before installing mandatory 1511. I don't know how to delay the update no more, I noted during a restore I had delay on updates that are why it has arisen just now.

  I do not know how to find where this BSOD ACPI.sys will come (even if it happens so rarely) or this that its trying to load just before it crashes (so I can try to delete the driver etc. by the front restored windows to upgrade)

  I guess the widowed causes 10 to do a restore, then the restore fails.

  Overall, I get at the end of my wits with this, to go a completely Windows 10 installation work Friday to more than two wasted days, restore backups, try again, rinse and repeat. It's now Monday morning and I am posting this as a ditch last attempt to solve the problem, your help would be appreciated.

  If you need more information please let me know the location of the files, etc, or their names and I will do my best to have copies available for you.

  I will now restore the backup again, uninstall loading of drivers, and then try the update of windows for the 4th or 5th time.

  Thanks in advance,

  Julian

  Woo Hoo, I've solved the problem!

  I uninstalled the drivers of graphics from AMD (with AMD Driver Cleaner) and Arcronis True Image Home 2013 at the same time, then let Windows Update run its course. Now I have a machine with Windows Version 1511 10!

  It took me 4 days of downtime...

  I hope this helps someone else.

• Toshiba Satellite: loop continuous Boot for windows 10 upgrade

  Hello

  I have a Toshiba Satellite and update of windows 10 a few weeks ago.

  laptop froze power so turned off the coast and now I am in a continuous boot loop.  I made a bootable USB key.  I leave the laptop to drain and was able to do ino the "toshiba configuration utility.  Fromm here, I was able to change the boot order to USB first.

  I'm Tournai on laptop and still get the message:

  "Your pc came across a problem and must restart. We restart it for you.

  Stop the code of NTFS file system.

  even with the USB from I get up for the first menu, then this message appears.  I can't even stop.

  I can't even start in safe mode.

  Help, please.

  How to stop the reboot loop?

  Thank you.

  needhelpj13

  Sorry, but these are the HP forums, not Toshiba forums.

  Many older laptop computers HP does not fare well with the upgrade of Win10, and therefore, we advise people AGAINST doing the upgrade.

  Don't know about Toshiba laptops - you should check out THEIR forums for technical advice.

  Good luck

• Stucks L50 - A satellite in reboot loop

  My L50 - A Satellite is stuck in a reboot loop. I put the computer off and drained the battery.

  Whenever I have it plug in I see the opening screen Toshiba (with no invitation to press F2 to pass set up) then it goes back to the reboot screen.

  I tried via a recovery bootable on USB but t does not work.

  What is there to do?

  > I tried to use on a USB key bootable recovery but t does not work.

  I assume you tried to reinstall the original recovery image. It should work.

  Enter the BIOS and set it to default settings. After that restart your computer and press F12. Choose the USB device as the boot device and try to restart recovery image installation.

• Y700 m2 upgrade - continuous reboot loop cycle?

  Hi all

  I recently bought a Y700 laptop with a 128 GB m2 and 1 TB hard drive.

  I found that the 128 GB drive is just about acceptable, but as I do photography editing, the drive working essentially consumes the rest 30 GB I have free instantly. I would also like a little more room for manoeuvre for failing to manage the storage space so closely.

  So I bought the following:

  Samsung SM951 M.2 PCIe SSD 512 GB
  SM951 Series MZHPV512HDGL-00000
  Capacity - 512 GB

  I read NVMe version is not supported, but I assumed it would work.

  I tried to use Acronis True Image clone/backup the existing drive, actually a recovery disc and used to restore the backup to the new drive. So far, everything seems to work.

  However, after reboot, first of all, I got a BSOD message saying "Inaccessible_boot_device" and then the system reboots. At this point the loop starts, the screen shows the text "LENOVO" on black for about 10 seconds, switches and 2 seconds later goes on to repeat the process to infinity.

  Thinking it was a problem with Acronis, I tried to use the Installation of Windows Media disc for just fresh install windows on the disk. Once again, everything seems to work and has been installed properly. However once the installation has been completed, once again reboot loop began.

  I must add that when the loop runs, hitting F2 or any other key does not work, so I can't access the bios to tell the computer to boot from a key USB etc. To exit the loop, I have to power off the laptop and remove the offending SSD drive and then restart. At this stage F2 works, allow me in the BIOS to re - assign the USB as a boot priority to try to restore media etc.

  I also tried to do "repair Windows startup", but after a few minutes, the repair process said that he could not repair the drive.

  At this point, I wonder which of the following occurs:

  1 drive is defective

  2 - the drive is not compatible (material)

  3. drive is incompatible because of outdated drivers (the laptop is 1 month old)

  Any help you offer is appreciated, because I doubt now, I can return the drive given the way it has been used now!

  An apparent difficulty has been to change the UEFI boot to legacy mode, but I kept the UEFI as first priority in the boot sequence. Things seem to work fine now.

  Weird that the 128 GB m2 player provided by Lenovo was beautiful on UEFI, yet my 512 GB there is no work?

• Computer goes into a reboot loop after installation of an update

  Original title: Windows Update on August 12, 2011

  My laptop has done a windows update this morning, don't know what he did, it was very fast now, everytime I turn on windows trying to open then fails and continues to do this in a loop.  Please no technique with the help of numpty here!

  Hello

  1. what update has the problem from occurring?

  Follow these steps and check if the problem persists.
   
  Step 1:

  
  You can check if you can "disable automatic system failure reboot " from the options in advance. In this way the computer will not go into a reboot loop and you will be able to note the error code, if any. If you see no error code, you can answer comes back with the error code.
   
  Step 2:
   
  I suggest that you start your computer in safe mode and check if the problem persists.
   
  Step 3:
   
  If the system works fine in safe mode, I suspect that there could be a conflict of software of third party causing the problem to occur. I suggest that you start your machine in a clean boot State.
   
  Note: Follow step 7 to your computer as usual.
   
  See the below article access in Event Viewer.
   
  Open event viewer
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  Step 4:

   
  Updated version has a problem in the history of the update.
   
  a. open Windows Update by clicking on the button start. In the search box, type Update, and then in the list of results, click Windows Update.
  (b) in the left pane, click view update history.
  c. to display more information about an update, double-click it.
   
  Do System Restore to the point that your computer worked very well and install updates manually ensuring that do not install the problem causing the update unless it says 'important update '.

• After installation of updates, received the critical error, then stuck in a reboot loop, Windows Defender now firewall and Security Center are all off

  I recently downloaded updates from microsoft. One of them was Security Essentials. Well, when I did caused a critical error. My laptop shut down and restarted. then gave me the same error message and rebooted again. He kept in a continuous loop. I tried the system recovery, but that did not work. I managed to get him to stop, but now my firewall is disabled and the Security Center and Windows Defender. If I try to turn it on, it does the same thing again. I don't know what to do to solve this problem. I need help!

  Original title: critical error

  Hello

  1. you have any multiple security software installed in the computer?
   
  2. What is the exact error message?
   
  Please follow the links below to solve the problem.
   
  Method 1
   
  Step 1
   
  Disable all third-party antivirus programs
  
  To disable a firewall, antispyware or antivirus program, right click on the appropriate icon for the firewall, anti-spyware or anti-virus program in the notification area in the taskbar. Then, click exit or click disable.
   

  a. in Windows Vista, click on start toreduce this includes this image, type appwiz.cpl in the Start Search box and press ENTER.

  b. in the list of installed programs, search for and then click on the program in question, and then click Remove.

  c. restart the computer.

  Note After you uninstall a third-party antivirus software, contact the manufacturer of the program or visit the company's Web site to see if a cleaning tool is available to help you remove any remaining files.

  Step 2

  See services

  a. click on start

  b. type services.msc

  c. navigate to the Windows event controller (right click on and select properties)

  d. set the startup type to automatic, start the service, click on apply and OK

  e to navigate to the Base filtering engine (right click on and select properties).

  f. set the startup type to automatic, start the service, click on apply and OK

  g. navigate to 'Windows Firewall' and select Properties (right click on and select properties)

  h. set the startup type to automatic, start the service, click on apply and OK

  Method 2

  Start your computer in a clean boot to avoid conflicts with third-party software.
  
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135
  
  Note: follow step 7 of the article mentioned above to start the computer in normal startup, once you have completed the necessary troubleshooting.

  Method 3
   
  Look for errors in the event viewer.
   
  Please check the Event Viewer logs to find errors in application logs.
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
  
  Please post the results for a better understanding of the problem causing the reboot.
   
  Hope this helps

• Computer is stuck in a reboot loop, while security updats

  ORIGINAL TITLE: reboot problem

  Computer is stuck in a reboot loop, while security updats

  Hello

  1 were there any hardware or software changes made on the computer before this problem?

  2. do you get an error message or an error code? If Yes, what is the exact full error message?

  I would suggest trying the following methods and check if it helps.

  Method 1: Try to run the system in safe mode restore.

  Step 1:
  Try to start the computer in safe mode, here is the link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:
  Once you start the computer in safe mode, try to perform the system restore and check that if it helps, here is the link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  If you were able to start your computer normally by using the system restore, then refer to the following method, and try to update your windows.

  Method 2: To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  Note: follow step 7 to reset the computer to start as usual after the boot process.

  http://support.Microsoft.com/kb/929135

  See the following help link.

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

  Hope this information helps.

• Reference Dell Vista stuck in a reboot loop must restore

  I have a dell desktop computer I bought from rent a Center about 2 years ago. It comes with Windows Vista. They don't did me not a recovery disk. I had a lot of questions and restore points were not helping, so I went through f8 and fact a reset. After that she completed successfully I clicked on finish, and it began to restart, which I expected.

  Now, however, he is stuck in a reboot loop. It gets to the screen that has Dell on this, with the f2, f12 options in the right corner, and then start again again and again. I tried to press f8 and hope go in safe mode and see what was up, but f8 does not open and f2 and f12 are not help at this point. they give me boot priority and so on but no real start until now kind of options. It is possible that windows doesn't have factory loaded, and now I have simply no operating system?  They say they have a reset disk can I come down and use, but im wondering if this will help because I can't really get anywhere or if im just done...

  No messages online that I was looking for really specific my situation...

  * original title - Dell Vista Start Up start up loop *.

  Hello

  ·         Did you follow the steps in this article to restore the computer to factory settings?

  If a factory restore full does not lead to a fully functional version of Windows then you have a hardware problem. I came in contact with Dell technical support.

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• 0 x 00000024 reboot loop

  I rebooted Vista recently it was very slow, and it got stuck in a continuous reboot loop. Startup Repair also fails to load correctly and restarts until I can do something with it. They showed me a BSOD with an error message after turning off the auto reboot:

  Stop: 0 x 00000024 (0 x 00190444, 0x86ec9940, 0xc0000102, 0x00000000).

  They tell me to run chkdsk, but don't know how while I can't in Vista at all.

  Safe mode is stuck at crcdisk.sys and restarts.

  Any ideas? How can I run chkdsk without going into Windows?

  Thank you

  Hello

  Check the following message methods to check the disc including making a repair disk.
  Some discs of diagnosis of the auto manufacturer to start.

  -----------------------------------------------------------------------------------------------------------------------

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods to solve problems
  BlueScreens - answers top 3 (+ 1 more).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  ------------------------------------------------------------------------------------------------------------------------

  Alteration of the disc or the material associated with the operation of disk (hard drive, wiring and controller of the motherboard),
  lack of enough system memory, BIOS and antivirus/antispyware/security programs may have a role.

  ------------------------------------------------------------------------------------------------------------------------
  
  BCCode: 24 0 x 00000024

  Cause

  One possible cause of this bug check is damaged drive. Corruption in the system of NTFS file or defective (sectors) on the hard disk can cause this error. Corrupted drivers SCSI and IDE may also compromise the ability to read and write to the disk system, so causing the error.

  Another possible cause is the depletion of memory pool non paged. If the nonpaged memory is exhausted, this error can shut down the system. However, during the indexing process, if the amount of memory available nonpaged pool is very small, another driver in nonpaged kernel memory in pool mode may also cause this error

  Solve the problem

  To solve a problem of hard drive corruption: Check Event Viewer for error of SCSI and FASTFAT (syslog) messages or Autochk (the application log) that might help determine the device or driver that generated the error. Try disabling any antivirus software or Disk Defragmenter tools that continually monitor the system. You must also run the diagnostics of material provided by the manufacturer of the system. For more information about these procedures, see the manual of your computer. RunChkdsk /f /r to detect and resolve any file system structural corruption. You must reboot the system before the start of the analysis of disk on a system partition.

  To solve a problem of impoverishment of nonpaged memory: Add new physical memory to the computer (which increases the amount of memory available to the kernel nonpaged pool), or reduce the number of files on the volume Macintosh (SFM) Services

  Schedule chkdsk to run at next boot (checkdisk).

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  BCCode: 24 0 x 00000024<-- read="" this="">
  http://www.faultwire.com/solutions-fatal_error/NTFS-file-system-0x00000024-* 1051.html? order = votes

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Computer randomly stops and goes into a reboot loop

  Original title: computer stops randomly on its own.

  When my computer is running, it will restarts randomly.  Any suggestions on why he can do this and how can I stop doing that?  Thank you!

  Hello
   
  1. do you remember any changes on your prior approval to question that occur?
   
  In the meantime, follow these steps and check.
   
  Step 1:
  
  You can check if you can "disable automatic system failure reboot " from the options in advance. In this way the computer will not go into a reboot loop and you will be able to note the error code, if any. If you see no error code, you can answer comes back with the error code.
   
  Step 2:
   
  I suggest that you start your computer in safe mode and check if the problem persists.
   
  Step 3:
   
  If the system works fine in safe mode, I suspect that there could be a conflict of software of third party causing the problem to occur. I suggest that you start your machine in a clean boot State.
   
  Note: Follow step 7 to your computer as usual.
   
  See the below article access in Event Viewer.
   
  Open event viewer
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]