reboot on windows vista

Similar Questions

• Error computer repair at each reboot of Windows Vista. Startup Repair says error ""could not repair.

  Original title: problem at startup

  Whenever I start my system, using windows 7 Ultimate a message for repair (recommended) or windows to start normally. When I go for repair, there nothing give a message "could not repair' why?

  Hello

  1. are you able to boot to the desktop?
  2 have you made any changes to the computer before the show?
   
   
   
  Method 1: Startup Repair is a Windows Recovery tool that can fix certain system problems that might be preventing Windows to start. Startup Repair scans your computer for the problem and then tries to fix it so that your computer can start correctly
  Reference: http://windows.microsoft.com/en-US/windows-VISTA/Startup-Repair-frequently-asked-questions
  
  Method 2:
  Windows Vista or Windows 7 unbootable, and the Startup Repair tool does not resolve the problem:
  http://support.Microsoft.com/kb/934540

• Audio SR.___No after new hard drive and reboot with windows vista pro form xp in hp slimline s7727c.

  have a hp pavilion slimline s7727c. hard Dr failed. Puy in identical new WD3200aajs old. reinstalled xp pro OS instead of vista home. everything works well after update driver nvidia to the system. a realtek HD AC97 audio when new. with controller audio generic SDO installed. have tried all drivers realtek has unsuccessfully, have now no audio and the system recognizes only not the controller is installed on the card. is there a solution? as a now-defunct windows driver or file which has been in the vista system that caused his work? looking for a solution. No PCI spare parts, only a slit, which contains card Tel/fax. Thanks for the help. Bill Huff Sr

  Hi billhuffsr,

  Run the patch from the link below: diagnose and automatically repair audio playback problems:http://support.microsoft.com/gp/no_sound

  Also, try the steps from the link below: how to fix sound problems in Windows XP:http://support.microsoft.com/kb/307918

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Computer is located in a loop of reboot installation update to the configuration of the stage on Windows Vista updates

  problem with the configuration of updates on windows vista - endless loop - no way out

  like many before me, I can't start my computer because windows update has got stuck to the configuration. When I try safe mode, it ends up with screen-cant even get on the system of repair-naoual the same loop. No one at microsoft knows the answer to this >

  You need to start on the Startup Repair disk or recovery Manufacturer'e disk/s.

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Mode of continuous reboot after an unsuccessful attempt, how can I return to a functional version of windows (Vista or 7)?

  I tried to upgrade to Windows 7 Vista SP1 from a disk of retail bought at Costco.  I received an unsuccessful installation and everything seems to be ok with a rolling Vista.  I woke up this morning to my system stuck in reboot mode.  I can't even Windows Safe Mode to work.  What can I do to get back to Vista?  I promise you that I'll never try to update again... Please help.

  Hi HelpPleaseWindows7,
   
  Thanks for visiting the site of Microsoft Windows Vista Community!
   
  (1) remove any external devices like floppies, CD, flash, printers and computer DVD drives and restart.
  (2) If this helps not to start your computer, use the Vista installation cd
  (3) try to get the error message by disabling "auto restart in case of system failure"

  If you have a Windows Vista installation disc:
  Insert the installation disc.
  Restart your computer.
  Click the Start button, click the arrow next to the button lock and then click on restart.
  If you are prompted, press any key to start Windows from the installation disc.
  Note
  If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.
  (BIOS WARNING):
  Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk).
  Choose your language settings, and then click Next.
  Click on repair your computer.
  Select the operating system you want to repair, and then click Next.
  In the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem, and if necessary, it may restart your computer, because it makes the repairs.
  If the Startup Repair tool is an option of recovering preinstalled on your computer:
  Remove all floppy disks, CDs and DVDs from your computer and restart your computer.
  Click the Start button, click the arrow next to the button lock and then click on restart.
  Do one of the following:
  If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.
  If your computer has more than one operating system, use the arrow keys to select the operating system you want to repair, and then press and hold F8.
  In the Advanced Boot Options screen, use the arrow keys to highlight repair your computer and press ENTER. (If repair your computer is not listed as an option, then your computer does not include startup as a preinstalled recovery option repair).
  Select a keyboard layout, and then click Next.
  Select a user name and password, and then click OK.
  In the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem and, if necessary, it may restart your computer, because it makes the repairs.

  Startup Repair: http://windows.microsoft.com/en-US/windows-vista/Startup-Repair-frequently-asked-questions

  Follow this link for more information: http://windows.microsoft.com/en-us/windows-vista/Startup-Repair-frequently-asked-questions

  Perform the system restore
  Follow this link: http://windows.microsoft.com/en-us/windows-vista/Turn-back-time-on-your-PC-Undo-system-changes-with-System-Restore
   
   
  I hope this information helps!
   
  Thank you, and in what concerns:
  Aziz Nadeem - Microsoft technical support.
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Windows Vista keeps rebooting while updates of finishes

  I installed new updates and restarted my computer, then he said updated configuration: 3 3 and whenever he always says 0%, then keeps on rebooting, I tried all of the safe mode options, and the last time that I started it normally upward, it syays impossible to install updates, I press ok then it's all over again. I can't return to windows because if this. I had problems with 3 of my PC, download of updates in the last two days.

  Hello

  I guess that part of the question could be a driver which is really old or similar should not be loaded.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------------------

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

  See article below for that.

  You can use this method on the updates that have this problem.
  http://support.Microsoft.com/kb/949358

  Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
  and install it.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• When I try to reboot my laptop (toshiba Windows Vista) displays a black screen and now I can not it reboot. It says bootmgr missing. What should I do to restart?

  Can someone help me please! When I try to reboot my laptop (toshiba Windows Vista) displays a black screen and now I can not restart. It says systeminst9.wnm is missing. What should I do I restart yo?

  Hi Ashutosh,

   
  You did changes to the computer before the show?
   
  This error indicates that the boot sector is corrupted or missing.
   
  I suggest for the link and follow the steps in the article:
  Windows error message «Bootmgr is missing Press Ctrl + Alt + Delete to restart»
  http://support.Microsoft.com/kb/2622803
   
  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
   
  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• Cannot install the update for Windows vista (KB2718704) a safe mode or after clean window reboot

  I can't install the update for Windows vista (KB2718704), a mode without failure or after clean window reboot.

  What should I do?

  Hello

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         You are able to install other updates successfully?

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  You cannot install some programs or updates

  Note: You must take the backup of the data before performing any installation of windows.

• How can I repair the windows vista 64system and I do not have the reboot disk

  I'm trying to fix my computer that has windows vista on it. He said that I need a reboot disk. Can you please help

  Hello

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• I get a blue screen permanently after a few minutes of a fresh reboot (Windows Vista)

  Hello-

  All of a sudden, I'm now the blue screen permanently after a few minutes, each time that I reboot.
  Here are the details of the error on a blue screen:
  operating system version 6.0.6001.2.1.0.768.3

  locale 1033 ID

  BCCode: d1

  BCP1: 9890A21c

  BCP2: 00000006

  BCP3: 00000008

  BCP2: 9890A21c

  operating system version 6_0_6001

  service pack 1_0

  product 768_1
  Please help - it has made my computer useless.

  Hello

  Have you made changes on the computer before this problem?

  Try the following and see if it helps.

  
  Method 1:
  
  Step 1:
  Try to boot in safe mode and check if it helps.
  How to start in safe mode in Windows Vista: http://windows.microsoft.com/en-US/windows-vista/Start-your-computer-in-safe-mode
  Step 2:
  Try a clean boot to safe mode and restart the computer in normal mode.
  How to solve problems using the clean boot in Windows Vista: http://support.microsoft.com/kb/929135
  Note: Once the diagnosis has been made, make sure that you try to step 7 of the article to reset the computer as usual.
  
  Method 2:
  
  Run the checker system (SFC) scan files and check if it helps.
  How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista: http://support.microsoft.com/kb/929833

  For more information, see the event log using Event Viewer. Please see the link below for more information on how to use Event Viewer to check the error message or information.
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  See also:

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly: http://support.microsoft.com/kb/958233
   

• How can I keep the "on-screen keyboard" to invite the user every time that I reboot? The system is Windows Vista.

  How can I keep the "on-screen keyboard" to invite the user every time that I reboot? The system is Windows Vista.

  Please explain what you mean... "incentive"?

  The keyboard screen is not supposed to be enabled when the computer is turned on.

  Here's how to turn off on-screen keyboard:

  http://www.Vistax64.com/tutorials/72733-screen-keyboard.html

• I hear a hissing sound at startup on my pc that I never heard before, and I have windows vista, anyone know why? I continue to reboot my pc until it stops.

  Original title: whistle sound at the start of the pc

  I hear a hissing sound at startup on my pc that I never heard before, and I have windows vista, anyone know why? I continue to reboot my pc until it stops.

  Hi Cupcake3381,

  ·         Did you do changes on the computer before the show?

  I suggest you to check and clean the boot if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Let us know the results.

• Update of Windows Vista SP on reboot hangs with an error capilock.dat

  Original title: capilock.dat

  Try to do an update of SP for Vista and after reboot hangs with xxx/xxxxxx capilock.dat

  Can someone advise on a solution or just a picture re the only way to go?

  Peter

  Hi Peter,.

  You can read the following article and try the methods provided to solve the problem.

  http://support.Microsoft.com/kb/949358

  You can also check the link and try the steps to install Service pack.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  http://support.Microsoft.com/kb/947366

  Hope this information is helpful

• Windows Vista update will not install and causes cell phone restart. Laptop will not reboot and Startup Repair cannot fix the problem.

  Windows Update tried to install 4 days now. Every time he tries it tells me it failed and trying to install in manually. He said then the laptop restarts, but it does not start. Startup Repair tells me that it cannot solve the problems.
  I don't know how to go beyond this problem, can someone help me? I have no disk Vista as it came pre-installed on my laptop. Help, please!

  If your Vista is preinstalled, ANY support for your laptop is the manufacturer of the computer, not Microsoft.

  Try this:

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not she, transfer your question in the appropriate Forum:

  Windows Update Forum:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows vista updates crashes reboot

  Hi, I've had my laptop windows vista for Christmas 2007 business and recently not installs the regular update of windows. The update appears on the home screen and I install, after the instalation it asks me to restart my computer when it restarts do the usual step 1 of 3%, but the updates don't seem to be mounting to and it comes up with one may appear saying "service pack do not have. Restoration of the changes. Do not turn off your computer"so I left it for about 4 hours and it still says the same message! then I turned off my laptop by pressing the power button and when I turn it back appears with the same message and I can't get on my laptop! My laptop is on and is now always show this message! Help, please!

  * Title *.
  Windows vista updates do not work

  claired8,
  Start by going through this article, then post back with the results.
  Vista update stops at stage 3 of 3 Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.