Reboot server V-center during production hours

Similar Questions

• Server 2012 jumps before 7 hours and 2 minutes or 2 to 4 new minutes during a reboot

  Whenever I reboot server running 2012 on my domain it is past directly on reboot for 2 to 4 minutes or 7 hours and 2 minutes and that the NTP server corrects for the final stages at the start. I looked on the Microsoft, HP and Dell websites with no luck. Any help would be appreciated.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Capture an image from a machine under windows 2000 server during production

  Hello

  We are looking to capture an image of a server windows 2000 (with sp4) has sql 2005 standard installed on it.  I've done a few machines and windows 2003 during production, while I used the converter and no problems.  Does anyone have experience with windows 2000?  I know that on windows 2000, a reboot is required.

  We bring the image into a villas of test to test the upgrade of the operating system to windows 2003.  Once satisfied, redo us the same process and will have ESXi host computer.

  BTW, the converter is version 3.03.

  Thank you

  TNT

  tractng wrote:

  Can someone confirm that during the capture of the image, the (any) services, sql, etc. on the operating system will continue to operate?

  I ran a test and see no problem but I just want to know that.

  I have captured many images of a windows 2003 while the services windows, sql server, etc. will work perfectly during the process.

  Yes, the services are still running.  However, it is normally recommended that you disable the services as much as possible.   If you have a lot of traffic to the server, the conversion may fail half way through.  And of course, all the changes bring users to data cannot be included in the image/converted data.  If the conversion is for dev/test, then it may be acceptable.

  When I did my hot clones, it was generally after hours so that I can disable the SQL and other services.  I've done a few hot clones with services running, but there is no user logged in, so very little traffic to the title of the conversion machine.

• Activate Windows 7 on a virtual machine on my Windows Home Server machine using my product key. I no longer use the complete installation. Am I in Windows license terms?

  I did virtualization p2v Windows Home Server 1 on an external drive using VMWare. I no longer use the physical instalation. The virtual machine has asked for activation on my laptop Windows 7 and worked well online. I'm in the terms of the Windows license?

  Please note that Windows Home Server is an OEM product which means, it is not intended to be transferred from one computer to another.

  For additional support and answers to your question, please post in the following forum:

  Windows Home Server Category - Microsoft

• "created the slideshow" inside loop problems (Windows Media Center) during playback

  Why didn't Windows Media Center during playback of a repeat of the start file "slideshow created with music" and / or "loopback", with only the first 20 or so (on perhaps a 100 total on the full slideshow) slides or photos over and over again without showing the rest of the majority of the slides at all?

  Hey trasel,.

  Unfortunately, it is not possible to include another small video clip for an existing video on which you have already created.

  However, you can create a new slide and add it to the existing one.

  Check out the link below howcreate slide shows in Windows Media Center:

  http://Windows.Microsoft.com/en-us/Windows-Vista/your-pics-on-the-big-screen-create-slide-shows-in-Windows-Media-Center

  Kind regards

  Savan - Microsoft technical support.

• 'Jumbo mtu system' configuration during production?

  Hello.

  Will be changing

   system mtu jumbo 

  from 9000 to 1500 disrupt the network if performed during production?

  Kind regards

  Martin

  Martin-Reset the switch then that the MTU change be taken into account.

  Thank you

  Ajay

• "The activation server reported that the product key has exceeded its limit of unlocking". Error

  Hello

  I recently changed my motherboard and processor because my old card mother and fried CPU. I had Windows 8 Pro (64-bit) installed earlier, an upgrade to Windows 7 (64-bit). As soon as I started first of all, I got a notification asking me to re - activate my Windows but when I try to activate it with my original key, I get this error: "the activation server reported that the product key has exceeded its limit of unlocking".

  I tried to activate by phone, but instead connect to the automated system, I keep to redirect to voicemail after a few rings. Can someone help me to activate my Windows again? I'm in Karachi, Pakistan.

  The report shows that it is been activated previously, but that the material has changed considerably since the activation - hence the request for reactivation.

  Not too surprising if you traded motherboards. :))

  Telephone activation is definitely the way to go - but it's in the lap of the gods (i.. activation e. operator the MS) as to if they will allow it if the original Win7 installation was an OEM.

  My belief is that they will allow him - of some people hold that they will not :)

• "Could not connect to the server Game Center"

  OK, so here's the deal:

  Im trying to connect to Game Center on my old phone to synchronize the progress of game. When I try to log in, it tells me that it could not connect to the server. I tried just about everything I could find on the Internet without success (discount and hard reboot reset settings do not work, and the servers are not enabled). Could someone tell me please how to fix this?

  iPhone 3GS, iOS 6.1.6

  Honestly, I don't want to hear that if you encounter the same problem, I just want to know how to solve this problem. Thanks in advance!

  Nevermind, it seems to have fixed itself.

• flight simulator 2004 will not load or run during hours of daylight Simulator, will ONLY during the hours of darkness.

  I've been using fs9 since 2005 and did not have any problem of an uninstall and the recharge could not or would not fix so far. I am running Windows XP Professional on a card, Gigabyte, AMD triple core cpu, NVIDIA 9400GT and 2 gig of ram graphics card. Last week so that on a flight simulated Auora Oregon in Livermore, California the program during the final approach simply broke back to high office as if the program had never been launched. The flight was at night and since then, the program will not allow a flight during the day (simulator time) it will allow selection of aircraft, flight planning and will start the loading of the field but will break back into high office again as if the program had not been launched. I rebooted fs9 several times as well as several other pieces of software (ultimate field real extreme weather events, mega city) but the problem persists. NO error messages are given or shown. Other than this problem embarrassing and extremely embarrassing performance of the software is superior. ANY THOUGHTS ON THE ISSUE?

  Hello randams,

  I suggest you do a system restore on your computer, choose a restore point when the Flight Simulator was working fine.

  a. Click Start, type system restore in the search box and then in the list click on the system restore program.

  b. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  (c) in the System Restore dialog box, click on choose a different restore point and then click Next (choose are the restore time when it was working fine).

  d. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  e. click Finish.

  If you still have the same problem, I suggest you post your question in the Forum of Flight Simulator, which is a forum dedicated to Flight Simulator:

  http://www.Microsoft.com/products/games/FSInsider/community/pages/default.aspx

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• VMware vCenter Server service stops after 1 hour

  I'm having a problem with my server vCenter 4.0. Less than an hour of a reboot, the VMware VirtualCenter Server service stops. If I restart it... It works for about an hour, then stops again. The following event is logged in the system event log. The VMware VirtualCenter Server service stopped with the error service special 2 (0x2).

  I'm SQL2005 Express is using a virtual machine, windows 2003 Std, 1vCPU, 4 Gb RAM Tomcat and SQL use a lot of memory.

  It is a similar problem to the responces you find on google - but not the same thing. My service will stop about an hour after a reboot clean and efficient.

  Ideas?

  I see that you have conveniently left a crucial part of the document...

  The part where is says this (pg 74).

  Base Group of 2005Express of Microsoft SQL Server that you can use for small deployments of virtual hosts up to 5 and 50 machines. If the machine has Microsoft SQL Native Client is installed, remove it before installing

  vCenter Server with the cluster database.

  If the machine has MSXML Core Services 6.0 installed, remove it before installing

  vCenter Server with the cluster database. If you are unable to delete using the

  Add or remove programs, use the Windows Installer CleanUp utility. See

  http://support.microsoft.com/kb/968749.

  Microsoft SQL Server 2005 for Microsoft Windows XP, apply MDAC 2.8 SP1 to the client. Use the native SQL

  So yes, you have exceeded your environment.  Still doesn't tell me if you looked at the SQL Express newspapers, because I'm sure that's the problem.

• Can I View Manager 3.0 to 3.1.1 during work hours?

  Hi all

  is it possible to improve my manager view of 3.0 to 3.1.1 during the working hours (08:00-17:00)? The upgrade process breaks the connection between client and server?

  See, View client agent and server connection to view, that we should I update first?

  Thanks in advance.

  hihiy

  I recommend you to upgrade:

  (1) login server

  (2) view composer

  (3) view Agent

  (4) customer view

  There will be some downtime due to the upgrade of services. Also, you will need some downtime to redial when you update the view in the picture Agent parent.

  I hope this helps.

  Jason Silva

  blog: http://silvaecs.com

• Windows Home Server 2011 - key invalid product no

  Hello. When you try to enter my product key in my Windows Home Server from a remote computer, I get an error saying that my product key is not valid. When I was troubleshooting and tried to install it on another computer the product key worked very well. I was wondering if someone can help me?

  WHS2011 running on a HP EX475 - 2 GB of ram, 64-bit processor

  Hi Gavin,

  Thank you for visiting the Microsoft answers community site. The question you have posted is related to Windows Home Server 2011 and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/winserver8gen/threads

  Thank you.

• Windows Homer Server Media Center not showing the new files I downloaded

  So I installed WHS2011 and thought that the library would easily work. It seems that the new files I put on the server are not get updated when I try and view them through the Media Center. Also when I serach for libraries on another device, it shows me two homeservers, one who say no files present and the other who has files (but does not update the index!). What is going on? (the file types are the same as the other files that are appearing fine)

  It is a basic installation, the only change I made is to move the directory to a new hard drive and update the WHS settings to point to the serverfolder updated on the new hard drive.

  I checked the settings on the media section of sharing control panel and it's on, I also checked on the dashboard and the media of Stentor is enabled.

  Why are my new files not updated in the index?

  Why two media servers on my other devices?

  Hello

  Your question would be better suited for the TechNet forums.

  I suggest you to ask your question to the forum Server TechNet for better assistance.

  http://social.Microsoft.com/forums/is/whs2011/threads

  Thank you.

• Reboot in 10 minutes or 4 hours?

  Or whenever the heck I chose!

  Seriously, why can't I just see the stupid restart message updated whenever I feel like I want to. I can't leave my computer for a long time without the fear of it restart because of stupid updates and possibly data loss and the windows open. It's so aggravating circumstances. I really wish that the next update will choose us when we want to restart computers instead of having to click "4 hours" every four hours, and if you miss it, too bad. Ridiculous.

  Again, see http://blogs.technet.com/mu/archive/2008/10/02/windows-update-and-automatic-reboots.aspx

  If the automatic update installs an update that requires a restart, the changes made by the update take effect until you have restarted. If you install a critical security update which addresses exploitation of security, your computer remains vulnerable to the exploit unless & until you have restarted.

  [ If you do not have to restart, why bother installing the update in the first place?]

  Conclusion: Never approve the installation of an update unless you are ready, willing & able to restart (or manually update, but do not turn off the automatic updates).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error of activation 0xC004C003 for Windows Server 2008 R2 Standard key: "the activation server determined the specified product key is in use".

  I installed Windows Server 2008 R2 Standard as a test version of an iso download got on the product site in Ms. In the meantime, I bought the software. Once the software has been delivered, I tried to activate with the key provided me with the software sent from Microsoft. I get... "the activation server determined that the specified product key is used" and throws the error asOxC004C003code. What gives here? They just sent me the key? I need to get this fixed as soon as POSSIBLE.

  Here is the Vista Forums.

  http://www.Microsoft.com/windowsserver2008/en/us/forums-blogs.aspx

  They will help you in the above Forums Windows Server 2008.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Here's what that means for Vista:

  http://support.Microsoft.com/kb/951287/en-us

  0xC004C003 error code

  The activation server determined that the specific product key is in use.

  This error code indicates that the product key you entered has already been activated, and you have to get a different product key.

  See you soon.

  Mick Murphy - Microsoft partner