Receive the error on the logging message indicating "problem accessing your user profile.
I get an error message from the log indicating that there 'a problem accessing your user profile '. About a week or two ago I called Microsoft and Security Support technician run my laptop in safe mode to remove a virus preventing me access to the internet. This problem has been resolved. I have not used my laptop again since then until today.
See if this helps:
·
See if the information in the above tutorial will help you.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx
Difficulty of a corrupted user profile
After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://support.Microsoft.com/kb/947242
A temporary profile is loaded after you connect to a Windows Vista-based system
See you soon.
Mick Murphy - Microsoft partner
Tags: Windows
Similar Questions
-
Question
I get an error message Firefox is already running. I rebooted and redownloaded the program and continue to receive the same messageSee:
-
I have Windows XP Home Edition, the internet connection switched through Earthlink and McAfee antivirus. In August, my antivirus software and when I tried to access the internet, the computer locked up--had to disconnect/reconnect to restart. Problem persisted. McAfee can tell me nothing. At the suggestion of Dell, I replaced the hard drive. Reinstalled Windows mfg disk and could connect to the internet just fine w/out of antivirus software. Installed McAfee and locked up again. McAfee is baffled by this, as is Earthlink. When I tried the Earthlink software, I received the following message before the computer locked: RAS error Interactive Mode #703. EarthLink told me that there is a "Windows problem in common. If anyone can help?
Hello
As the problem only occurs after installation of Mcafee, you could try to install another antivirus and check.
I suggest you to go through the steps mentioned in the link below and check.
Method 1:
How to troubleshoot possible causes of Internet connection problems in Windows XP http://support.microsoft.com/kb/314095
Method 2:
How to reset the Protocol Internet (TCP/IP)
-
Hi, I try to connect to hotmail and received the following message ' sorry, there's a problem with Hotmail right now Hotmail was not able to complete this application. Microsoft may contact you about any matter that you declare "what steps should I take as I have urgent e-mail to check." THX
Hello
Looks like a temporary problem.
Answers is a peer group supported and unfortunately has no real influence on Hotmail.
HotMail has its own Forums, so you can ask your questions there.
Windows Live Solution Center - HotMail - HotMail Forums Solutions
http://windowslivehelp.com/Hotmail - Forums
http://windowslivehelp.com/forums.aspx?ProductID=1Hotmail - Solutions
http://windowslivehelp.com/solutions.aspx?ProductID=1How to contact Windows Live Hotmail Support
http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htmWindows Live Hotmail Top issues and Support information
http://support.Microsoft.com/kb/316659/en-usError message "your account has been locked" when trying to connect
http://windowslivehelp.com/thread.aspx?ThreadId=77be7d82-a0e9-49c7-b46d-040ec654a9e2Compromised account - access unauthorized account - how to recover your account
http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41Hotmail hacked? Take these steps
http://blogs.msdn.com/b/securitytipstalk/archive/2010/07/07/Hotmail-hacked-take-these-steps.aspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Dear Microsoft, I received the following message, why they can be installed? I have Windows XP
The following updates have not been installed.
Update of security for Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2518870)
Update of security for Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2478663)
Thank youHi BuddyWoods,
· What is the exact error message?
· Have you made changes on the computer before this problem?
Before windows updates, follow these methods.
Method 1: Put the computer in a clean boot state before proceed with the installation of update to see if there are any software conflict as the clean boot helps eliminate software conflicts.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: After the clean boot for troubleshooting, return the computer to a Normal startupmode.
Method 2: Temporarily disable the security software.
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.
http://www.Microsoft.com/downloads/en/default.aspx
Method 4: Reset the Windows Update components.
How to reset the Windows Update components?
-
Thunderbird guard receives the same message.
On an old desktop PC, always under XP with AVG free antivirus. I let my AVG computer can be updated at night. All of a sudden Thunderbird had received the same message over 200 times. It took a while to remove them all, and now I must leave off Thunderbird so it will not continue to receive this message. It is a message from my sister that contains a few attached images, photos from his camera, and the webmail message appears only once. I change not all configurations, except after this problem started, updated to Thunderbird 31.6.0 to 31.7.0. Any ideas?
Try to remove the message via webmail or move it to a different folder on the server.
It is highly unlikely that the update of TB is the cause. It is more likely Avast is playing with Thunderbird files.
So the Thunderbird profile folder should not be scanned by anti-virus software. -
I have two computers-
On WinXp and Eudora receives emails in normal text.
Sometimes, the other on Win-7 and Thunderbird receives the same message in code.
Normally, this same message is received on the other computer.
What have I've set wrong
GerryMcDonaldStart with view-> Message-> HTML Original body
-
With my new desktop Windows 7 hardware configuration, I decided (before you consider VMware Player) to retry Windows Virtual PC; but instead of using Windows XP Mode (which is useless because the disk is inaccessible), I decided to use my own Windows XP Pro OEM. [I use it for games that won't play on Win7. Security issues are also irrelevant, because for these games, I'm not likely to use the Web. Of course, I always Windows Security Essentials in my OEM customers.]
The problem here is, whenever I have to Activate my integration, features VPC opens as if the Windows XP Mode have been installed (it is not); and when the screen is turned on, it asks my user name and password. I tried to use the name and the password that I entered when installing my XP OEM; but I get this message:
"The system could not log. Make sure that your user name and domain are correct. Type your password again. Letters in passwords must be entered using the proper case. »
How is it that I can't access my Windows XP OEM guest when the integration features are enabled? Only when they are disabled can I activate my OS; invited but it's counterproductive, because I won't be able to move items from my host in my comments. Once more, if I should decide to use VPC as my host VM for Linux Ubuntu/Kubuntu, what chance is there that the activation of the integration features will lock out me my Linux guest?
Another thing: in the Start Menu under Windows Virtual PC folder I have shortcuts for ' Windows Virtual PC ' or 'Virtual Machines' (according to the Win7 version I use, 32-bit or 64-bit); but I also have "Windows XP Mode", I have not installed. How is that possible? I checked the shortcut, and point it to rundll32.exe. Should I just get rid of the shortcut, or I will incur damage to my VPC if I do?
Hello Cooky,
Please provide a detailed description of the issue.
I understand the inconvenience you encountered. However, I appreciate your efforts.
To get more information about it, we have a dedicated forum where these issues are dealt with and would be better suited to the TechNet community.
Please visit the link below to find a community that will provide the best support.
https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro
I hope this information is useful.
Please let us know if you need more help, we will be happy to help you.
Thank you.
-
After getting a username / password Adobe download Adobe Digital Editions 3.0 and borrowing from my public library and download e-books to my Kobo Glo, I received the following message: "this document is protected by Adobe Digital Rights Management (DRM) and is not currently authorized for use with your Adobe ID. Please connect with the authorized Adobe ID and try again"
[moved from the download, installation, commissioning to Adobe Digital Editions]
-
Hello
I received the following message when you try to install Photoshop CC, "you run an operating system that Photoshop no longer supports. See the system requirements for a complete list of the supported platforms. »
I use Windows Vista so not sure what to do now! Any help would be greatly appreciated thanks.
CC of Photoshop only works on Windows 7 or Windows 8/8.1. No Vista.
-
Receives the following message when you try to open a project, "Captivate cannot open the next project. Ensure that the project is not already open... There is enough disk space... "All the critiria are put... still can't open the file. Please help in the recovery of this project.
Suggestions here:
http://www.Infosemantics.com.au/Adobe-Captivate-troubleshooting/recover-corrupt-project
-
I recently installed camera raw plugin (9_1_1_7) for sony camera rx 111. When I try to open photoshop CS4, I get the following message, "could not complete your request because photoshop does not recognize this file type" How can get cs4 to read the raw file?
Hi diggoman,
Greetings.
- Camera raw 9.1 is not compatible with 4 CS of PS.
- This camera is too recent for your PS CS 4
Your options if you want to open raw files-
- Purchase PS CS 6
- Or go to subscription with PS CC 2015, where you will also have access to the PS CS 6
Concerning
Rohit
-
Error message: "unable to access your Valet."
Whenever I try to open Cisco Connect, it still shows the error message: "unable to access your Valet. You can access your Valet settings when you are connected to your Valet. "However, I'M connected to it. In the center network and sharing in Windows Vista, it shows that I am connected. I tried to disconnect/reconnect and even restarted the computer. Easy setup key will do no good because it is not updated. All this happened after I tried to change the router password. He did cut my internet connection and to say 'we encountered an error. If anyone has a solution to this, that would be nice. Also, I would like the address for the Web-based utility change the settings of the router if I can not ultimately only Cisco Connect works.
Also, I apologize if this is in the wrong section of the forum.
OK, I fixed it. I have reset the router to the factory settings. Once again, thank you John for trying to help me, I really appreciate it
-
I'm trying to move from xp to windows 7. I spent all the requirement but she says to install the device driver required to access your hard drive, insert the installation media containing the driver files and then click OK. "what should I do? Where can I find the driver?
Guess he would seek software/drivers for the chipset MB
& sata/IDE controller software. Get the MB hardware specifications, go to the mfg
Web site & download the software and drivers. If intel, download the chipset installation
utility & install it 1. The other would be the SATA or / and drivers for the MB IDE
controllers, 'Matrix Storage console' would be the one, also chk for desktop
Internet downloads, amd, and other brand materials would be substantially the same.
-
Desperately need help. I'm supposed to use my computer to type a HUGE Affidavit today and its buggered! Oh no.! Get started with my kids have been playing on my computer and install different games. So I thought that I do the big thing non-technical MOM and start cleaning up the programs! Well I accidently deleted NIVIDA and probably something else (I think) and totally messed up my computer! I have re-uploaded NIVIDA and now my computer "looks like" back to normal, but it throws this error message
"your user profile was not loaded correctly! you have been logged on with a temporary profile. Changes to this profile will be lost when you log out. Please, check your log of events for more information or contact your administrator"and now I can't save anything or find my pictures that I'm desperate for! Can someone please give me a helping hand. Not technically minded, to take me on as a challenge! Thanks bunch :) Sarah
Desperately need help. I'm supposed to use my computer to type a HUGE Affidavit today and its buggered! Oh no.! Get started with my kids have been playing on my computer and install different games. So I thought that I do the big thing non-technical MOM and start cleaning up the programs! Well I accidently deleted NIVIDA and probably something else (I think) and totally messed up my computer! I have re-uploaded NIVIDA and now my computer "looks like" back to normal, but it throws this error message
"your user profile was not loaded correctly! you have been logged on with a temporary profile. Changes to this profile will be lost when you log out. Please, check your log of events for more information or contact your administrator"and now I can't save anything or find my pictures that I'm desperate for! Can someone please give me a helping hand. Not technically minded, to take me on as a challenge! Thanks bunch :) Sarah
Here is the tutorial to solve this problem. It is very involving. Please read the step by step.
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlt-4-2
Maybe you are looking for
-
lost bookmarks save the file seems to be emty
something happened with the money of kaspersky security enter a safe mode on online bankingdisabled Kaspersky and restarted the computer, but made firefox as first down loaded without my favoritesSo will form but nothing seems to work is there someth
-
Problem of motherboard and processor
Hi Ive had a big problem on my computer hp pavilion dv6-3143sa laptop. It crashed last month and I put it in a computer store to find the problem. They told me that my motherboard and cpu had crashed. I wonder if LC for a card replacement mother & cp
-
Start in safe mode will not alternate between black and blue BSOD - until - must / can do?
-
Help icon blackBerry Curve 8520 smartphone
Hello I recently bought a BB 8520 curve, and today, I noticed an icon at the top of my screen that has two seated circles on a line so to speak? I'm not sure what that means or if I hit on something to make it appear, if someone has an idea of what i
-
Help! Unable to save all the files in CC or Lightroom?
I recently to improve my Mac MacOS Sierra in operating system. Since then, I can import my RAW files in Lightroom & I can send them to Photoshop CC but I can't save the file once I worked on them in any format? It tells me access denied in Photoshop