Receiver SM65Helper error in Vista

Similar Questions

• I can't install Service Pak 2 for Windows Vista. I received the error code 0 x 80070490, which has a link on the home page, but it is not working properly and it took me nowhere. Help!?

  Install Windows Vista Service Pak 2 upgrade

  I received the error code 0 x 80070490, which has a link on the home page, but it is not working properly and it took me nowhere.

  http://support.Microsoft.com/kb/958044

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Win Vista 64-bit installation charges and received the error 800b0100 on 6 major updates Code when they failed.

  I just finished a new installation of Windows Vista Ultimate 64-bit. While approaching the end updates, I received this error, the 'Code 800b0100'. I looked online and the couple of things that I tried did not work. Can someone help me? I'm about to give up and do a fresh install, but I don't want to if I'm not, because I have no insurance, it will solve my problem. My installation is activated and verified. I'm running an AVG 9.0 anti-virus program, everything else is still by default for most.

  Hello

  1. don't you make changes on the computer before the show?
  2 have. what troubleshooting steps you tried on the computer?

  Method 1:
  You can try the steps from the link provided and check.
  Windows Update error 800b0100
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-800B0100

  
  Method 2:
  You can also perform a clean boot, and then try to install and check.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.

• When you install windows vista service Park 1, I have received an error code 80073712 with 13% downloaded only?. Can you help me to complete this process?

  When you install windows vista service Park 1, I have received an error code 80073712 with 13% downloaded only?. Can you help me to complete this process?

  Hi Gore EzekiahTongun

   

  You can see the steps in the below mentioned article Microsoft and verification.

  http://support.Microsoft.com/kb/947366

   

  I hope this helps.

• I can't install windows vista service pack 2, receive the error code 490

  Tried to install Windows Vista service pack 2. (KB948465).   Received: Installation failed.      Also: element not found.      Error: ERROR_NOT_FOUND (0 x 80070490).     and finally the code 490 - Windows Update encountered an unknown error.

  Hello

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  http://support.Microsoft.com/kb/958044

  This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

  http://support.Microsoft.com/kb/947366

  Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

• Trying to download music from itunes on a Windows Movie Maker 6.0 file and receive an error msg stating not installed codec. Windows Vista operating system.

  Trying to download music from itunes on a Windows Movie Maker 6.0 file and receive an error msg stating not installed codec.  Windows Vista operating system.

  Trying to download music from itunes on a Windows Movie Maker 6.0 file and receive an error msg stating not installed codec.  Windows Vista operating system.

  ==============================
  The following thread explains how to convert
  the files to a different format... iTunes then
  You should be able to import them.

  Need help to convert itunes to Windows Media
  http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/f496ae8e-d3f9-4336-BB3C-8070421c8eff
  (Scroll to the bottom to detach the message by: musiclover101)

  Or... use the following freeware to convert your
  already downloaded files to the .wma format.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.pcfreetime.com/
  (FWIW... installation..., you can uncheck
  all the boxes on the last screen)

  After downloading and installing Format Factory...
  Open the program and choose an output folder...
  (this is where you will find your files when they are
  converted)

  Drag and drop your files in iTunes on the main screen...

  Select "while"WMA"/ OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Receive the error "Windows has stopped working" after installing the update of security for Vista (KB977165)

  I use Vista Business, I installed the update of important security for Vista (KB977165), after installing and restarting my computer, I received an error message that Windows has stopped working and then I get a black screen. I rebooted in safe mode and did a system restored. So currently I did not update.

  This happened to someone else? Is it I can do it fix it?

  Hello

  Since you get such a serious mistake, I would use the free incident reports.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• install only a winxp.trying so that i receive bluescreen error.please give the solution

  I'm already installed win vista for my compaq cq60-104tu laptop.now I install only a winxp.trying so that i receive bluescreen error.please give the solution

  Hello

  It would be better if you provide the exact error message, but you can try the following procedure:

  http://h10025.www1.HP.com/ewfrf/wc/genericSoftwareDownloadIndex?softwareitem=ob-54270-1 & CC = US & LC = on & DLC = in & DLC = in & lang =

  Kind regards

  Mohammed Mukram

• Satellite L300 - error 8007007 Vista update

  I use the laptop Toshiba L300 with Windows Vista Home premium loaded into the system while the purchase.

  I found the update via Windows update Vista. I tried to install it, but during the installation I received an error 8007007A message.

  Can someone help me to fix it?

  Hello

  I discovered that the error 8007007A means.
  Insufficient buffer number.

  Someone has suggested that the update of windows is probably set to "automatic".
  There are probably too many updates or a large as a service pack.

  If you have n t a SP1 is installed, then you can download it manually and could then try to install it.
  Then try to install more updates Vista!

  Good luck

• I received this error message after you remove the address something about Cloud.app

  I received this error message after you remove the address something Cloud.app.   Can you tell me how to fix this error message. "  '/'  "  ?

  Hello Phyllis,

  When you receive this error now?

  Let's run boot minimum troubleshooting to find the cause.

  Windows XP:

  http://support.Microsoft.com/kb/310353

  http://support.Microsoft.com/kb/316434

  Windows Vista and Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Please note that after refine us the cause, it is important that we return to a normal startup and manually delete the startup program.

  Best regards

  Matthew_Ha

• When you install an automatic update. I received the error code 652. try three times. Always code error 652. She strives to update of Miscrosoft Silverlight (KB2164913) need help.

  When you install an automatic update. I received the error code 652. Have tried three times, always the error code 652. She tries to Miscrosoft Silverlight Update. need help

  Hello

  ·        Remember to make changes to the system?

  Follow the steps mentioned below.

  Step 1:

  There may be some third-party software that runs in the background, I suggest you do a clean boot and check. To perform a clean boot follow the steps mentioned in the link given below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you have finished installing, follow step 7 to start the computer in normal startup.

  Step 2:

  Reset windows update components and check. Follow the steps mentioned in the article below.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058/en-us

  Step 3:

  See the article mentioned below.

  Description of the update for Silverlight: September 1, 2010

  http://support.Microsoft.com/kb/2164913

  To get help after your query in the Microsoft Silverlight Forums. Click on the link below.

  http://forums.Silverlight.NET/forums/

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Receive the error code 0 x 643 trying to update. Not sure why they don't is not loading?

  Receive the error code 0 x 643 trying to update. Not sure why they don't is not loading? Tried to look at the code but nothing helped. Any suggestions?

  You can watch the following article to see if this will help with the error 80070643.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070643>

  UTC/GMT is 15:50 on Sunday, August 19, 2012

• I tried to update but received this error: Code FFFFFFFE, what should I do?

  I tried to update but received this error:

  Code FFFFFFFE
  What should I do?
  What does that mean?
  THANK YOU VERY MUCH FOR YOUR HELP! : D
  -L

  Hello

  You can be infected by the Malware.

  "Error Windows Update FFFFFFFE.

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-FFFFFFFE

  Search for rootkits with this program:

  http://support.Kaspersky.com/downloads/utils/TDSSKiller.exe

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• Try to load software PhoneTree and I continue receiving ADODC error code. What should I do to install the software? How can ADODC error be corrected?

  Try to load software PhoneTree and I continue receiving ADODC error code.  What should I do to install the software?  How can ADODC error be corrected?  I have Windows VISTA

  Hello

  Thanks for posting your question in the Microsoft Community.

  From the description of the problem, you are not able to install a belkin wireless adapter. I'll be happy to help you on this question.

  You did changes to the computer before the show?

  Method 1: I suggest you to run the fixit from the following link:

  Diagnose and solve the program installation and uninstallation problems automatically
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

  Method 2: I suggest you perform the clean boot and check if the problem persists.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode.

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• We try to update the software on a computer and continue to receive the error 1719:

  We try to update the software on a computer and continue to receive the Error Message 1719: "Installer cannot access the Windows service". We tried to repair Windows install several times by the cancellation of registration registration without success. Windows Installer continues to block the update of the program

  We tried to install a new version of Kaspersky and have met the above problems.

  Hi Jug,

  Thanks for posting the question on the Microsoft Community Forums. I understand that while trying to update the software, you get an error 1719: "could access the Windows service install.

  This question is can be caused due to:

  You install or remove a program that uses Microsoft Installer Service to install a program on your computer. The Windows Installer Service is not running. The Windows Installer registry settings may be damaged or wrong.

  I suggest you check out the link to the troubleshooting steps.

  Error "The Windows Installer could access the Service" when you install or update programs on Windows 7 or Windows Vista.

  http://support.Microsoft.com/kb/2642495

  WARNING:

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 http://windows.microsoft.com/en-us/windows-vista/Back-up-the-registry

  How to back up and restore the registry in Windows.

  If still the problem persists after you perform the steps of troubleshooting from the link and if you have questions related to Windows, please do not hesitate to answer us, we will be happy to help you.

  Thank you.