Recent update has messed up the boot process.

Similar Questions

• HP Elitebook 8740w: How can remove the text / name of the company that is displayed during the boot process?

  Hello

  I bought my work laptop from my employer. During the startup of my employer's legal name is still displayed on the splash screen ' "(the screen with the HP logo).

  -J' already started back and ran the EREPLOGO. EXE utility to remove the logo (ereplogo.exe/e). The utility said that the logo has been removed;

  -in the BIOS 'view custom logo' is unchecked, so it will not use an image of the partition tools hp;

  However, during the startup the company name is still displayed on the top of the screen... :-(

  (1) how can I change this text to start or remove it completely?

  (2) what can I do to display the specifications of hardware during startup instead of this "splash screen"?

  Thanks in advance,

  SJW

  PS I have the latest BIOS (F.60 Rev.A, November 30, 2015)

  Hello

  I managed to change the line of text with the BiosConfigUtility64.exe.

  With "BiosConfigUtility64 getconfig:config.txt", you can write all the values in the bios and a text file with "BiosConfigUtility64 setconfig.config.txt", you can set all the values after you change the values you want to change. In my case, that I had to change the value of "property tag", which is the value that appears in the home screen during the boot process.

  Later, I discovered the tag 'property' can also be changed under the Security tab of the configuration of the BIOS (F10) normal... until I knew what the property tag, I associate the line of text to security so I did find the text before :-) field

  Best regards

  SJW

• Satellite L305-S5955 - gel of the boot process

  Toshiba Satellite L305-S5955
  Once it froze early in the boot process - until windows starts, indicating (to me) it must be material.

  John

  Hi John,.

  You have already reinstalled Windows with Toshiba Recovery disk (factory settings)?

  If Yes, it could be a hardware problem, otherwise, it looks like a software problem or driver.

• Windows Update has disappeared from the BONE. __

  I am using windows 7 32 bit.
  Windows Update gives me an error "Windows update does not work because the service is not running. Please try to restart the computer. When I open windows update by using the start menu, it takes about two minutes to open, then there is a red X beside where it says click to launch updates. When I click that is gives the above error.
  Also in my fix PC next to the clock. She has that I click so I can not change this setting either this "change window update.
  Seems that windows update has disappeared from the BONE.

  Hello

  Welcome to the Microsoft answers community site. I suggest you try these options:

  Option 1: Make sure that Windows Update Service is running, or if a force start it takes

  1. open run it and type services.msc, and then press ENTER.

  2 locate the underside of services in all install services list.

  Windows Update (a)

  (b) BITS (Background Intelligent Transfer Service)

  (c) cryptographic Services

  3. check that the status is started. If the condition column is blank, right-click on the service and select start.

  4. always make sure that the Startup Type is set to automatic, and then restart the computer.

  Option 2: How to reset the Windows Update components?

  Run the Microsoft Fixit tool to reset Windows Component Update.

  http://support.Microsoft.com/kb/971058

  See also http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-with-installing-updates

  Option 3: search for viruses and malware

  (A) online scanner to check if a virus is a cause of this problem. Follow the link to run a scan online http://onecare.live.com/site/en-au/default.htm?mkt=en-au

  Or use Microsoft Security Essentials - free

  http://www.Microsoft.com/Security_Essentials/

  (B) check for the shape of software malware malicious software removal tool

  http://www.Microsoft.com/security/malwareremove/default.mspx

  Or

  Follow the link below on how to get rid of malware: http://social.answers.microsoft.com/Forums/en-US/vistasecurity/thread/ba80504b-61f1-4d71-960f-b561798b7b42

  Let me know if it works. Good luck!

  Hope this information is useful.

  Thank you and best regards,

  KKS Vijay

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• BREAK THE BOOT PROCESS

  I have a MXP1700 and trying to force the boot process.

  Using a standard PC with a port of comm DP9 it works when I select CTRL Break of my keyboard.

  I have a LAPTOP with no pause button and can't get the system to stop the boot process using ALT B or ALT + B?

  The cable uses a USB to DB9 adapter as the laptop isn't a comm port.

  Other commands, I try to break the boot process?

  Note the MXP1700 is not initialized on one side.

  When I check the selectsw #1 or #2 it displays "invalid" on each... as it does not recognize the firmware on each partition.

  I have never loaded the SW using Xmodem... is there a procedure that I can get to do this process?

  Thank you.

  Regarding the sending of the newline character, the sequence of keys (or in some cases, a menu item) will depend on which terminal emulator software you use (TeraTerm, HyperTerminal, PuTTY, etc.).  You will need to check in the software that you use on the way to send the newline character.,.

  For both your images of software showing as zero, looks like your flash is corrupted.  You could try a "eee" reset which can help to recover it, but have a similar issue previously, it is likely that you will need a hardware replacement.

  Wayne
  -Please remember the frequency responses and mark your question as answered as appropriate.

• Unit test: is there a way to make the dynamic query of the value of running after the boot process?

  I wonder why the dynamic value query is executed before the boot process? Logically, it makes sense to run after them.

  For example, I test a stored procedure that is supposed to delete a record, and I'd like to create this test report should be deleted as part of the startup process before execution of the stored procedure call to delete this test record. Apparently the dynamic query of value not returns not the test report in as long as the query parameter to call the stored procedure under test, which makes me think that is executed before the startup process of design...

  Please advise...

  Thank you

  Val

  As this thread does no traction/attention of the team of SQL Developer for a while, I had to submit a request for formal improvement on metalink:

  RE: 19834977 - IN THE UNIT TEST REQUEST TO ALLOW TO CHANGE THE ORDER OF EXECUTION OF THE START OF THE PROCESS

  Thank you

  Val

• Satellite L300D-13s will slow down the boot process

  Whenever I start the Satellite L300D-13 s computer laptop (using Vista Home Premium with factory settings) I am presented with a Please wait"" message. The startup process can take up to a minute! Is it because of McAfee installing and executing a Bios check, because this does not happen on my desktop PC (Vista Home Premium) except if an update has been installed?

  Apologies for the fundamental question, but this is getting frustrating that this happens every time you start and I don't know why. Please help if you can?

  Thanks in advance...

  Hello

  There are different reasons why your Vista runs slowly.
  The main reason is the enormous amount of processes that are ruining to the background of the OS.

  You should know that the laptop uses different features that are controlled by drivers and tools.

  If you want you could disable some processes using the MSCONFIG. Check the Startup tab.

  Verify that the processes are not really important to you and turn it off.

  Welcome them

• Windows XP starts with a black screen and hangs for two minutes before the end of the boot process.

  Original title: Windows xp slow at startup delayed to the office after you download the updated April 8,2011

  First time after updating, would start then black screen can see the cursor then took 20 minutes before Office input... now does the same thing but just a few minutes. What happens all started after the recent update April 8... something about a NET update? any IDE how to fix?

  Hi kaeli,.

  ·         Have you checked the problem in safe mode?

  Step 1: Try to start in safe mode to see if you can start fine.

  Step 2: If he is able to start fine then try try perform a clean boot to normal mode to check whether a third-party program is causing the problem.

  How to configure Windows XP to start in a "clean boot" State

  You can also read the following article to resolve the problems on the issue.

  Perform a clean boot to determine if background programs interfere with your game or program.

  Note: Make sure that you put the computer to a Normal startup once you are finished.

  See also:

  Computer stops responding with a black screen when you start Windows XP

• Recent update has changed my screen resolution?

  Recent update of windows changed my screen resolution. Blow up all my icons, wallpaper and extends the size of windows. Pages do not correspond to windows, the computer and on the web. It is the second time that this happens, and I don't know how I straightened the last time. I know this isn't a major problem, it's just frustrating, as it has a mind of its own.
  Any ideas would be greatly appreciated.

  Change your update settings and do not install the the hardware driver updates left 3rd of Microsoft Updates. Find them in the constructor.

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• An update that messes with the keyboard

  HP Support Assistant was an update on 11/30/2015, almost all of my keys have been affected by the latter.

  My keys on the keyboard will work exactly correctly, ALL my keys.

  for an example, I could stand w to move in a game and he would have a work stoppage or be active without holding me on.

  I can't figure out if its an update or a certain type of process that is on.

  All I had to do was to do a restore of the bios.

• Windows Update has messed up my computer...?

  I was going to restart my computer and saw the update windows... so I decided to update my computer so... When windows has finished updating and reloading... He would work for the first minute or so it would freeze... Freeze not literally... but nothing will work and I can still move the mouse but the mouse icon would be stuck in this symbol of loading... (the little blue circle)

  At the beginning I thought I would just let it finish loading all that computers in train load... but 30 minutes later, its still stuck on loading... I did a hard reboot, and the same thing would happen... 30 seconds - 1 minute to load windows it would freeze just about anything under its weight...

  So I thought the windows update screwed up my computer... I loaded in safe mode and tried to do a system restore, only to discover that my computer system restore has been disabled! ??? ... so now I have no idea what to do... someone please help me I have a lot of work to do... Thanks in advance

  on the top of my head, here are my computer specs:

  Windows Vista SP1
  Intel Core i7 940
  12 GB of ram
  NVIDIA FX 1700

  Update on the situation:

  I've posted on several technical forums and 2 of them have been asked to go into SafeMode Add/Remove programs and uninstall then windows updates...

  The problem with that is that my computer does not record the fact that he just installed an update... It is said that the update performed on the computer has been on the 17th of September... the date today here is Sept. 23...

  I uninstalled the 2 updates from 17 without prevail... the problem persists... I load windows in normal mode... and 30 sec-1 min later it freezes just on loading things...

  Should I just keep uninstalling windows updates until the problem is solved?

  No answer to this problem... two days of discussions of the forum tech 6... 1 hour 4 telephone conversation with microsoft support technology... end result? Reinstall Windows... GG

• How to disable the driver during the boot process?

  Hello

  I have uninstall a printer from my computer, but when I restart my computer during the process sometimes a back pop up windows and require a response at the prompt of the printer driver I uninstall, but this statement was not disabled or deleted.

  How can I access the startup file to change?

  Thank you

  Hi Reyes,

  Restart your computer and start pressing on the keys on your keyboard. On a computer that is configured to start to multiple operating systems, you can press on the -key when the Boot Menu appears. On the Advanced Boot Options menu, select Disable the Driver Signature Enforcement press .

  

  This will disable the drivers at startup.

  Hope the helps of information provided.

• Performance - remove igdkmd64.sys monitor - its by slowing down the boot process

  Hello

  I am running windows 7 Home premium SP1 64-bit and the monitor above suggests that I try to delete the driver above because it slows down the startup / boot process

  Can someone please suggest easy steps to remove the same and if there are implications for the removal of the driver

  Hello

  What is there to process you followed to remove it... It's actually not a bad file... Its graphic driver Intel. Igdkmd64 sys is the Intel Graphics Kernel Mode Driver for Microsoft Windows 8, Windows 7, Windows Vista, and Windows XP 64 - bit operating systems.

  the igdkmd64.sys file could be the driver Intel Graphics. Have you tried to download the drivers directly from the Intel web site? If this is not the case, try using this link:

  http://www.Intel.com/p/en_US/support/detect

• Satellite P70-A-11 q - Windows 8.1 stops during the boot process

  Hello.
  I have a q P70-A-11. almost from the first day I got the camera that I have problems with starting.
  The OS is installed on a 250 GB SSD.

  Treat it as I turn on the laptop and its still the boot stops down unexpectedly without an error message.
  This happens almost every time 2nd, I try to start the laptop.

  I know this isn't a lot of information but I don't have any newspapers, or something that I can help you.
  Concerning

  You are right. There isn't a lot of information on this virtual path, it is not easy to say what the problem is.
  What is your laptop preinstalled with original OS that you got with it? I presume that the only change is upgrade SSD, right?
  So if I understand you well you traded original HDD with new SSDS and original recovery image is installed.
  This problem started immediately after the upgrade to SSD?
  When you put the old HDD inside the same thing from happening again?

• Conflict of resource with card wifi PCMCIA on the boot process

  -Did you turn off the wlan card integrated in the victory and also with the switch near the wlan on board.
  -Did you flash the latest bios version

  Seems that the problem is loading.

  Is it possible to disable the onboard in the loading process? Even though I'm sure it must be possible to have two cards installed?

  I'm really looking forward to receive assistance.

  A shame that there is no cat.

  No, as much as I know you can disable only the LAN card and not the wireless network card.
  The wireless network card may be disabled in Device Manager.

  But have you tried to change BIOS options for the PCMCIA card.
  I put t know what phone you have but the Toshiba BIOS options of configuration on the second page.
  If the configuration of the device is set on all devices, you will be able to change the PC Card controller mode to: Auto selected, compatible CCIP or CardBus/16-bit

  If he not there no improvement then I guess there is nothing to see