Reception of sms in GSM USB Module labview

Similar Questions

• Reception of sms on my Skype number.

  Hello

  I have a Skype number. I need to get SMS messages to any mobile number.

  Is there any improvement in the reception of sms (SMS) to any mobile in the future?

  Thank you

  Skype numbers are numbers of landline so no SMS.

  In the latest version of Windows 10 if someone sent you a text it came in the mail and Skype IM app (they also came in Skype) and if you have a Windows phone if you get a text it appears on your PC via Cortana and you can answer from there (you can also send SMS using Cortana).

  If the idea is there, but Skype/MS has turned on the SMS and IM when the update of the anniversary is out.

  As far as I know, it is that Skype will manage SMS from your mobile phone at a certain time in the future, but how far it is, suggests.

  But as I said if you have a Windows phone and the PC using the latest version of 10 and Cortana is running, you can receive and send texts from your PC with ease

• I can't communicate with Yokogawa GS200 USB in Labview 10

  Hello world!

  First of all, my English is not good I have a problem in labview 2010; I try control yokogawa gs200 a counter source via USB in labview 2010, but labview 2010 has no device driver Wizard and the MAX (measurment & auto...) in labview 10 not not from older versions. I checked the same instrument on GPIB. I can not put the name of resource VISA, I have not found the usb drivers so I can't install them but I can not install them, even if I found it. Help me please

  
  

• convert elements using the DAQCard-6024E card to USB-6221using LabVIEW 2009

  I just got an old project, the VI has been primarily designed using the DAQCard-6024E map. Since we would be upgrading the equipment and the DAQCard-6024E serves not long. However, they want to keep the similar façade. I am trying to convert the drop-down menu that I can use with USB-6221 with Windows 7, but I don't know how. Can anyone help?

  Windows 7, NI USB-6221, LabVIEW 2009 sp1

  Hi smoothenigne007,

  After watching your upgrade.  All your writing VI should use the same task.  There is no need to close this task until the end of the program.  In addition, you can remove all the time because they do not allow the task close a loop.  I did a performance highlighted with your code and you can see that the first task was not allowed at the time wherever the data reached the second task.  When you try to create the second task, the error is generated.  Because you do not give me multiple writes to the same port there is no need to open and close the task each time.  Here is a link that will explain a little more about the DAQmx driver works.

  Getting Started With DAQ

  Kind regards

• HP Pavilion DV6535ep power Jack / USB module compatible numbers

  Hello

  My HP dv6535ep has recently begun to turn off randomly. At first, I thought it was because of the temperature of the CPU/GPU but then discovered that he was in fact the power jack which became very hot and it has partially melted. I completely disassembled the laptop and inspected the power Jack / USB module and not found other flaws that a charred soldering point corresponding to the + 19V input line. I tested the power cable and the PCB board for short circuits, there is everything. I also tested the diet that works. Since the tip of electric power cable have significantly melted, I replaced with a new cable and assembled the laptop again. However the problem persists, with the new power supply tip, the tip and connector instantly becomes very hot when the laptop is turned on. The laptop does not even pass the BIOS/POST, she shut it down. For completeness, I will add that the blue power jack light is on once I connect to the edge of power.

  So in summary:

  * After you turn on the laptop, the DC power connector tip and jack become very very hot in a matter of seconds (point melt the end if not immediately disconnected).

  * The power DC jack light is on after plugging in the power.

  * The laptop often depends not at all and when it does, it stops during the BIOS POST.

  * The power supply is working (I have tested) and the power cable and points work too (I replaced with new parts).

  Then, leading me to believe the power Jack / USB is defective and must be replaced and that's the reason why I am writing here in the first place. You would be so kind and provide the power Jack / USB board of part numbers that are compatible with my laptop? Current reference number (defective) power Jack / USB card is

  DDAT8APB3002907

  I have difficulties to find exact matches on the surplus stores, where the best that I got is DDAT8APB300XXXX, where the last four digits do not match. Are they compatible?

  In hoping to hear talk about you,

  Thank you

  -Angelo

  PartSurfer information:

  446524-001 in stock USB ports and card power connector - for connection of adapter CA 90 watts RoHS: change	40,38	0.00	40,38
  449454-001 in stock USB ports and card power connector - for connection of 65 w AC adapter RoHS: change	40,38	0.00	40,38

  You'll have better luck he is looking through the references above. The price seems a little dirty to me and you might have more luck on ebay or a House of rooms online.

• Installtion stop at the stage of "usb module loading.

  Hello

  I am trying to install my first VM of nu metal sphere

  I have downloaded the .iso image file and burned to a new CD.

  I put the CD in my PC, newly built and launched the installation.

  Currently, he is arrested to "usb module loading" step and even if I tried it again 3 times, it stops always at the same point.

  Can someone help me? I am stuck and don't know what to do.

  My system is as follows:

  1 MB: ASUS M4A89GTD PRO/USB3

  2 WD SATA 1 TB HARD DRIVE

  3. DVD SATA drive

  THX,

  Disable USB in the bios in general means that it is not available to do anything because it is completely off. IF you really want to use the USB of ESXi 4.1 transfer, then you'll want to supported hardware...

  FYI, VMware ESX/ESXi is NOT your typical OS... It's a bare metal hypervisor. As such it needs to interact at a much deeper level than to any other operating system, hence the need for the material to be on the HCL... I've gotten to the point where if the material isn't on the VMware HCL, or something that turned out to have zero emissions made by many people test it successfully, I wouldn't even consider using it.

  I kind of got lucky with my current of ESXi host, while all the time I have dedicated to research before making the purchase was fortunate to part of the equation. I made sure that the speed control (hardware RAID) was on the list HCL as well as processors and practically everything I could check. In addition, I had several highly technical conversations with engineers from Dell BEFORE I made the purchase. I then provided feedback on the success of the installation, so that they would know that it would work (even if it is not 100% supported in this configuration).

  IF you really want to build a white box to run ESX/ESXi, then get a motherboard server, use the CPUs (Xeon, nothing else) server, with a material (with BBWC) RAID controller, SAS, ECC memory hard drives, etc... Before starting to invest in all of this, however, check the big manufacturers (and their release sites) to see if they offer any servers that ARE on the VMware HCL at a better price... You can pick up a Dell R710 server with one or two drives inside for a good rate... At this point, turn your current box in SAN and place the virtual machine is... You can even try the method of operation ESXi 4.x from a (2-8 GB in size) USB flash drive, since you'll be able to leave enabled on the host USB...

  VMware VCP4

  Review the allocation of points for "useful" or "right" answers.

• USB modules of NOR?

  
  

  Hello riotmus

  I think I understand your situation. You want to know if it is possible to connect the two USB sensors to your cDAQ so in this way the use of a USB port from your PC, am I right?

  Unfortunately, NEITHER does not have a module of USBs and there are other methods like the use of the USB ports of the chassis (according to what frame you own), but it could be much more complicated.

  I can think that you can try is to use a USB HUB, the only thing, is that the bandwidth will be shared between the three components in this case, but according to the flow rate you use, this could be a good approach.

• purchase of a multimeter digital usb for labview

  Hey guys, im a total newb to this program, but im already addicted.  I did a multimeter on a voltage regulator interface and the kit from velleman k8055.  but I think that id like better accuracy.  are there affordable digital multimeters with two entrances, this interface with labview via USB?

  I thought it would be good to get some recommendations here.

  Take a look at...

  http://www.mccdaq.com/products/usb_products.asp

  They do not have a stand alone DMM but it may be something you can use way less than $1300 NOR wants to their DMM unit.  I'm under a lot of equipment with excellent results!  ... MCC is a subsidiary of OR, if this is useful.  :-)

• Save the data of the 6000 USB without Labview

  Hi all.

  I'm sure that this questions is buried somewhere, so I apologize if I'm repeating a question that has already been asked and addressed. If this is a redundant question, simply pointing me back post relavent will help.

  I have a 6000 USB. I configured and works very well in a test panel Max is possible to log data acquired at one any file without Labview signal Express, studio or lab windows/cvi measurment? In a similar note, being able to acquire and record data without another routine of programming such as .net or C++. Maybe there is a way to create a task and call it from an excel macro?

  I know that I dug my own grave by getting to the bottom of the similar USB DAQ. However, even with the USB-6000, there must be a way to connect the data being acquired without having to invest more in software development. Does not seek to do anything fancy like trigger or manipulation of data, I'm looking to record the voltages measured to drop and do post processing in Excel.

  Still, I'm sure that this (or at least a similar) question has been asked before. Any help would be appreciated.

  Thank you

  Ben

  I think that Signal Express, it is what you really want to use here.  It was designed for the acquisition of very high level, simple as.

  In MAX, you can configure the task to save a PDM file.  This enabled, you should be able to leave just Signal Express your task and then tell him to stop whenever you want and the data will be saved.

• How can I read/write from/to a USB in LabVIEW

  I read through a number of tutorials and help information, but I can't seem to find a way to do it.

  I created a driver for LabVIEW to recognize the USB and I can find it using the 'VISA Interactive Control', but which is as far as I can get.

  How can I simply write a small file on the USB key and read the same file back? I'm just trying to make the verification tests.

  (via LV2009)

  Thank you

  I don't understand why you're messing around with VISA. When a USB drive is connected to a pc, normal windows driver will be appear as an extra disk and you can write and read it with the regular file IO functions. He has held several positions on the detection of the indicator of new road.

• driver for USB - 6221 LabView 6.0 XP

  I'm trying to connect an old laptop with Windows XP and Labview 6.0.2 for USB-6221. I can't find the drivers on the site of NOR. Can someone point me at home or another source? Thank you.

  Support for the USB-6221 was added in the NOR-DAQmx 8.6.1, driver that only supports back to LabVIEW 7.1.  Unfortunately, there is not a version of NOR-DAQmx driver that supports the USB-6221 and LabVIEW 6.0.2.

• How do I turn on/off outputs multiples with a single button using USB-6501 & Labview 2010

  I've written a VI with 24 buttons, one for each output of the USB-6501, for turning on and off 24 relay.  Now, I want to add more buttons that activate and deactivate the outputs multiple.  We will call these Presets buttons and pressing the Preset button a few outings turn and some turn off.  Get it?  The VI I've included a screen shot is used to test a transmission controller and rather than to manually select one at a time relay I want a preset button that sets up instantly relays for the next stage of the event.

  The VI I wrote uses tasks created in NI MAX.

  I am a beginner of Labview, so please try to keep your easy to understand solutions if possible.

  Thank you

  Kevin

  BTW, I'm registered in Core 1 and 2 month next to Richardson, Texas.

  Here's an example - you will learn about the grapes, berries, events, etc., in the class, but this will give you a head start. Code is attached but I took a screenshot to give people an idea of how simple the schema becomes:

  

  As your learn about them, I suggest you also make the cluster a TypeDef and make management mistakes, but I've omitted the example to keep things as simple as I could.

  Good luck, LabVIEW learning, it is worth!

  ~ Simon

• Camera not found, error 1074360311 occurred at IMAQdx Open Camera.vi, USB cameras labview 2013 64 (bitts)

  I use USB cameras with labview 2013, and I can acquire images in the MAX and in the Acquisition of mink (express) settings, but when I run the VI, always appear the same error as shown in the Image below.

  -J' checked the correct versions of my software, IMAQ, IMAQdx, VDM 2013 IMAQ of e/s

  -J' I also make sure I had all the updated device drivers.

  -I'm using IMAQdx LKD schema and examples, getting the same error uu

  Help, please!

  Any suggestions would be very helpful.

  

  If it works in the pop up app Express VI and inside MAX (the two 32-bit applications), then I guess it will work in 32-bit LabVIEW. We wonder why it does not work in 64-bit LabVIEW, but these are the drivers of the device and other pieces of infrastructure/DirectShow Windows.

• NI USB - 6525 Labview lib

  Anyone know where I can get the labview for the NI USB-6525 device drivers. I searched but Idk if the machine is new and the driver do not yet exist. If someone has a link please let me know.

  You have installed DaqMX?

  http://www.NI.com/download/NI-DAQmx-14.1/4953/en/

  http://www.NI.com/dataacquisition/nidaqmx

• USB-6008 LabVIEW 2011

  Hello

  I can't find any solution so that my usb usb-6008 interface works on LabVIEW 2011, DAQmx Wizard is missing and I can't find any comparable VI!

  Someone at - it an idea?

  Simon

  Have you installed the DAQmx driver after installing LabVIEW?