Migration of the AP in WCS: "Failure - role of Veryfying Radio."

Hello

while trying to convert autonomous APs (AIR-AP1121G-E-K9) mode LWAPP WCS always says 'Fail - role of Veryfying Radio'. Anyone know why this happens? The analysis of migration summary shows all criteria that green. Thank you.

In the wcs logs folder: / wcs/webnms/logs/it must be a direction for migration and the migration of this ap logs.

Could you post?

Tags: Cisco Wireless

Similar Questions

  • Cannot migrate VM on iSCSI SAN. Failure at the helm of the 10%. Peut vmping to all addresses

    Hello everyone

    Impossible to migrate virtual machines on iSCSI SAN. Failure at the helm of the 10%. Peut vmping to all addresses

    I recently installed a new configuration of the VM and I feel the above. My configuration is:

    2 HP DL380 with 1CPU 16 GB of ram and 500 GB shared space on iSCSI SAN.

    Installation of the network as follows:

    each host has the 6 network ports that is load balanced and fault tolrated in 3 VMSwitches. VMSwitch0 goes to 2 ports to shared resources on a 4510th cisco. On this switch, I use VLAN tagging to different servers that perform different functions. It works fine.ie. VLAN 5 is for the management vlan 31 is for secure vlan servers 37 is forinternal Web servers.

    VMSwitch1 is a vmkwenelport for the connection of iSCSI SAN. It is set on vlan 200 on the switch, so does tagging vlan put it. We have separated our san network ourusual networks.

    vmswitch2 is used for backup purposes and is used in a similar manner as vmswitch0. the ports of trunkied and backup services is vlan tag to go to the correct servers.

    I am able to ping betwneen the VLANS allowed. I can also vmkping to all the ip addresses of the two hosts san.

    What I can't do is to migrate direct customers between the hosts. He is still unable to 10% with the following error:

    Migrate the computer virtual iws3xx - pop1.mns.tlg.private a general error has occurred: the VMotion failed because the ESX hosts were not able to connect to the network for VMotion.  Please check your physical network configuration and settings network VMotion.

    I looked in the newspaper of vmkkernel and I get the following text:

    9 Oct 15:05:38 esxn1-pop1 vmkernel: & lt; 7 & gt; fn_scroll_back not implemented & lt; 7 & gt; fn_scroll_back not implemented & lt; 7 & gt; fn_scroll_back not implemented & lt; 7 & gt; fn_scroll_back no implemented7:05:04:55.236 cpu2:6534) migrate: vm 6535:2094: info setting VMOTION: ts = 1255097135856641 Source, src = ip & lt; 172.31.207.21 & gt;

    9 Oct 15:05:38 esxn1-pop1 vmkernel: ip dest = & lt; 172.31.207.22 & gt; Dest wid = 6447 using SHARED swap

    9 Oct 15:05:38 esxn1-pop1 vmkernel: 7:05:04:55.236 cpu2:6534) Tcpip_Vmk: 1107: refining worldwide 6899 172.31.207.21, success

    (9 Oct 15:05:38 esxn1-pop1 vmkernel: 7:05:04:55.236 cpu2:6534) VMotion: 1807:1255097135856641 S: Set ip address ' 172.31.207.21 ' worldlet affinity to send the world ID 6899

    9 Oct 15:06:53 esxn1-pop1 vmkernel: 7:05:06:10.234 cpu3:6899) WARNING: MigrateNet: 668: 1255097135856641 S: Connect to & lt; 172.31.207.22 & gt; : 8000 failed: timeout

    9 Oct 15:06:53 esxn1-pop1 vmkernel: 7:05:06:10.234 cpu3:6899) WARNING: migrate: 295: 1255097135856641 S: Failed: host ESX The failed to connect on the network for VMotion (0xbad010d) @0 x 0

    9 Oct 15:06:53 esxn1-pop1 vmkernel: 7:05:06:10.245 cpu1:6538) WARNING: migrate: 3267: 1255097135856641 s: Migration, considered a failure by the VMX.  It is probably a timeout, but check the VMX log for the actual error.

    The journal of vmx says:

    16:07:38.856 Oct 09: vmx | http://Msg.checkpoint.migration.nodata the VMotion failed because the destination ESX host has not received all of the data of the source on the network for VMotion ESX host.  Please check your network VMotion settings and physical network configuration and ensure that they are correct.

    Can anyone help with this please

    No iSCSI traffic will work only if vmKernal and vmConsole are on the same vswitch. Maybe on the same vLAN according to how your VLAN.

  • The upgrade of WCS

    Hello, I'm looking to upgrade my 4.2.110.0 to 5.1.65 for the MSE support WCS.

    I backed up the database before you uninstall 4.2.110. I installed the 5.1.65 version of WCS. I have restored the database file that I backed up previously. However, it seems that the restore fails with a message indicating a version mismatch.

    So my question is, how do I upgrade and maintain my configuration of WCS and the database? Is it possible even with these versions, or will I have to configure everything from scratch?

    Concerning

    Chuck

    Hello

    Your upgrade path is wrong: 4.2.110.0 was released after 5.1.65.0, and therefore your restoration is a failure.

    Please consider passage of 4.2.110.0 to the new version, which will be any 5.2.x or later version, released after Sep 29, 2008.

    You have the list of the versions with the release notes here:

    http://www.Cisco.com/en/us/products/ps6305/prod_release_notes_list.html

    Avoid in any case 5.1.x for WCS.

    I recommend 6.0.132.0 or 5.2.148.0.

    In these cases, you can simply install 5.2.148.0 or 6.0.132.0 on your 4.2.110.0 and the database will be restored successfully.

    That should solve your problem.

  • all my icons that were normally at the bottom of the screen have migrated to the right side and are all bundled together how to place their return to the bott

    I recently bought a HP 15 laptop with 8.1. I use mainly desktop with latest Mozilla. All my icons that is usually found at the bottom of the screen have migrated to the right side of the screen and boots, to the top, I can't do your choice. I tried to customize without result. I am 75 but strive to keep abreast, but it baffled me.

    Sorry, it's a question of support of Windows, the Windows taskbar does not part of Firefox. I do not use Windows 8.1 myself, and I don't know if the process is the same as on my Windows XP - but maybe click and hold and drag this bar down might work like on Windows XP.

    If you do not understand what I said, or it does not work, here is a popular Windows 8 support forum that should be able to help you.
    http://www.eightforums.com/

  • Migration via the time machine (old imac) to new imac done numbers keynote pages and other programms disappear

    Migration via the time machine (old imac) new done imac numbers keynote pages and other programms disappear - what is my mistake?

    You should be able to re-download your apps purchased on the Mac App Store.

  • After the installation of 12.0, I get popups and migration from the lower left of my screen that will heal all the ads block settings.

    Whenever I visit a new Web site I can wait for one of my first 'clicks' to open a new window with something like a Quibids announcement or a site with audio asking me to take a survey vaguely regarding the site I'm. There is also an ad in the migration of the lower-left corner of my screen that no amount of effort will get rid of. It didn't happen until last week when I downloaded the latest version of Firefox. My OS is Windows 7 on a Toshiba laptop. I connect with a hotspot from Verizon at home only. I scan all emails before downloading from the server PC of the population. I ran most of Windows and a couple of free virus programs did a full scan nothing helps. This problem does not exist when I navigate with Windows Explorer.

    Sometimes a problem with Firefox can be a result of malware installed on your computer, you may not be aware of.

    You can try these free programs to search for malicious software that work with your existing anti-virus software:

    Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one.

    More information can be found in the article troubleshooting Firefox problems caused by malware .

    This solve your problems? Please report to us!

  • The Apple ID server failure

    I can't connect to the App Store or my phone on the backup device. Able to backup on iTunes but the phone can not restore from iTunes. Says that it cannot connect to server Apple ID Impossible to reset the phone. Help, please

    Hello krosa290,

    Thank you for using communities Support from Apple!

    I understand that you are having difficulty to connect to the App Store and backup your iPhone using iCloud. We know that situations like this can be frustrating, but there are a few troubleshooting steps that I would recommend working through this situation.

    To begin the process of diagnosis, I suggest reading over and working through the steps in the following article.

    On your iPhone, iPad or iPod touch

    If you cannot connect to the iTunes Store on your iPhone, iPad or iPod touch:

    1. Make sure that your date, time, and time zone are correct. Tap Settings > general > Date & time. Time zone can list another city in your time zone.
    2. Make sure your iOS software is up-to-date. Tap Settings > General > software update to check for updates. You can also connect your iOS device to iTunes and click on search the update on the summary page of your device.
    3. Check and verify that you are in range of a Wi - Fi router or base station. If you use the cell service, make sure the cell data are lit settings > cellular. If you are connected to cellular data, large items can not download. You may need to connect to the Wi - Fi to download applications, videos and podcasts.
    4. Make sure you have an active Internet connection. Check your device Manual for Internet connectivity.
    5. Check if other devices, such as laptops, are able to connect to the network of Wi - Fi and Internet access.
    6. Reset the wireless router by turning and then again.

    If there is still a problem, learn what to do if your device connects to a Wi-Fi network.

    The Apple ID server failure. Apple support communities

    See you soon!

  • Satellite L500-1DT - HDD the smart predict service failures

    Hello

    I have a Satellite L500-1DT and the last days he started to say "your HARD drive has the smart predict function failures"-is that what I did for her or is it a problem to manufacturers? I only got two months.

    Anyone know if I can fix it myself?
    I have just in Spain and I'm here for the next two months.

    I'm useless with technology...

    Any help would be good.

    Thank you!!

    Kate

    Please don't fix anything alone. New notebook has warranty valid so if something goes wrong the affected parts must be replaced and warranty will cover all costs.

    Visit THIS page and read what means SMART.
    In other words, your HARD disk goes wrong so please back up all your important data and contact the nearest Toshiba service provider and ask for help.

    I don't know where you live in Spain, but to find the nearest Toshiba authorized maintainer visit the Toshiba support page under
    http://EU.computers.Toshiba-Europe.com > support & downloads > find an ASP contact them as soon as possible.

    Good luck!

  • Random BSoD occurrences, can not read the message because no option to put an end to restart in the event of system failure.

    My girlfriend has a HP dv4-1465dx experiencing hardware problems, the laptop will be blue screen randomly and then restart 1-3 seconds later. When you restart the laptop reads, "No boot device - insert boot disk and press any key." If the laptop is turned off and turn it on again, it works fine, until the next BSoD. The first time that this error the hard drive was seized up, unable to enter a bank hard disk enclosure repair attempts that forced me to buy a new one.

    I tried the bios of an option to disable the restart in the event of system failure so I could read the error message, but it only gave me discover that HP has less useful bios in the world and that no such possibility existed; Yes I have updated the bios. Start/hardware error logs contained no data also, what so ever.

    The hard drive is fine, I ran it in my office for several days. a BSoD happens within his laptop several times a day.

    I don't know what to do at this point is that I have nothing to work outside of, I hope someone has a useful idea. The laptop is no longer under warranty, but this is ridiculous, how fast this thing is falling apart (literally... screws are only randomly drop the case).

    Yes I really don't think that this is the case. As mentioned above is not my laptop so I'll probably wait until he decides to restart not at all before eventually taking an iron to be welded to it. Thanks for all the information, assume that nothing can be done at this stage.

  • LDIF syntax error: what is the reason of this failure when you try to import the new user

    What is the reason of this failure when you try to import the new user, followed the book syntax

    C:\Users\Administrator\Documents>ldifde-i f Newusers.ldf
    Connecting to "practice01.testa01.com".
    Registration as current user using SSPI
    Import directory of the file "Newusers.ldf".
    Loading entries.
    There is a syntax error in the input file
    Failure on line 3.  The last token starts with 'C '.
    0 entries modified with success.
    An error has occurred in the program

    Hello

    The question you have posted is related to LDIFDE with Active Directory in a domain environment, and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the best support.

    http://TechNet.Microsoft.com/en-us/default.aspx

  • The patch maintains a failure in low load isKB928367

    The patch maintains a failure in low load isKB928367

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=15054

    How to find error code for updates failed

    First of all check the history of windows update to find the error code for the updates failed.

    Click Start > all programs > windows update > view update history

    Right -click the update failed, and then click display.

    `~`

    The current time and the date now in Baja California, Mexico

    07:00
    Sunday, June 2, 2013
    DST - 0700 UTC
     
    UTC/GMT is 14:00 Sunday, June 2, 2013
                
    Current weather conditions in San Felipe

    Claire81 ° F / 27 ° C

  • Driver WiFi updated 10.0.0.217 solves the problem of intermittent failure of person?

    Aspire V3 - 571G, Windows 8, Qualcomm Atheros AR5BWB222 network adapter

    I installed the new driver from the support site Acer (10.0.0.217) and am still WiFi intermittent outages every 15-20 minutes (appears as a limited connectivity).

    Someone at - it solved this problem on a V3 - 571 G, Windows 8, with the 10.0.0.217 driver?

    I will be definitely back it if I don't get this solved, because it is unusable as it is.

    Can anyone help?

    Thank you

    Hi, I just bought my V5-571PG yesterday, and I found exactly the same problem as you - wifi disconnects very often, almost every 7-10 minutes and reconnects automatically to 1-3 min. That really annoyed me.

    After that I downloaded and installed the latest driver from the Acer site, this failure intermittent wifi finally resolved.

    Go to the Acer Web site and find this driver, e.g. Aspire S3-391,S7-391,V3-731,V5-431,V5-531,V5-551, V5-571... for Win8

    As long as you can find the exactly the same file as below, it should work.

    Wireless LANAtheros(New) wireless LAN driver10.0.0.217.v3216.5 MB28/12/2012

    I downloaded and then run the "setup.exe" in the folder to uninstall the old drivers. After that the old version has been uninstalled, then run again to install the new drivers. Computer restarted after it has been installed.

    It's been at least 2 hours now, and my laptop still works well. Finally the wifi still has more random disconnection

    I hope it works for your V3 as well

  • How to solve the problem up the msg "floppy seek failure" at the start and have to press F1 to continue?

    I get the message: "diskette seek failure" on start-up and must by pressing F1 to continue.

    I took actions

    1. I replaced my dvd/cd drive since was noisy and not reading. (I thought I had a HW problem with the drive because it was a bit noisy etc - maybe not the problem because I always get the message)

    2.i press F2 and changed my BIOS so that my hard drive and CD/DVD are the only elements used in the start menu to the top and deleted the other ports using record to remove from the boot sequence.

    3. using the Device Manager I have disabled the floppy drive A and uninstalled the SW, but whenever I restart Windows it says that it detects new HW and re - install the floppy drive on A.  I don't have a floppy drive on my computer!   I don't think that I had a drive on my control panel before this problem.

    Talked to Dell but my warranty is void

    Help

    rhs_44

    Hi rhs_44,

    ·          What is the model number of the computer?

    ·          Do you remember any changes made on the computer before the show?

    Try the steps suggested by Dell and check if this may help: http://support.dell.com/support/topics/global.aspx/support/kcs/document?c=us&docid=52030&doclang=en&l=en&s=gen&cs

    In addition, you can post your request in the Dell forum for more press the same: http://www.dellcommunity.com/supportforums

  • The STATE of the POWER of DRIVER FAILURE by closing

    PILOT FAILURE of STATE, its says that is why my stop takes too long, it just happened after my upgrade to win 8.0 to 8.1.

    Help, thank you

    How can I fix driver power state failure in Windows 8?

    Status of power driver failure error in Blue Screen of Death (BSOD). This error mainly because of incompatible driver or inappropriate for any device that can have a computer system.

    Often, a simple restart is all that is necessary to solve the problem. If the problem persists even after the restart, the computer must be restarted in safe mode, and the problematic device driver must be uninstalled. Because Windows 8 does not allow users to press F8 or SHIFT + F8 at startup of the system to access the advanced by default start menu, administrators must activate menu of advanced boot legacy manually before to enter safe mode. Once Windows 8 computer is started in safe mode, the problematic driver can be uninstalled to solve the problem.

    After you have uninstalled the driver of the origin, its new compatible version must be installed.

    Note: The exact information of the problematic device driver can be found through the automatically generated minidump file by Windows 8 when the blue screen of death. In order to view the generated minidump file. Extension DMP, BlueScreenView application can be downloaded and run.

    How to activate the Advanced Boot Menu?

    To enable advanced legacy in Windows 8 boot menu, the instructions below must be met:

    1. Restart the computer Windows 8.
    2. Enter the BIOS setup and configure the system to boot from the CD/DVD drive.
    3. Save the settings updated the BIOS and restart the computer.
    4. Insert the bootable Microsoft Windows 8 installation DVD into the drive of optical media (CD/DVD Drive).
    5. When prompted to press any key to boot from CD or DVD, press any key to start the computer from the DVD media.
    6. In the Windows Setup box appears, click Next.
    7. On the next page, click on repair your computer.
    8. In choose an options screen, click on troubleshooting.
    9. On the troubleshooting screen, click Advanced options.
    10. On the screen advanced options, click command prompt.
    11. The open command line interface (CLI), type C:, and then press ENTER.
    12. On C: prompt, type BCDEDIT/SET {DEFAULT} BOOTMENUPOLICY LEGACY command and press ENTER to activate the advanced legacy boot menu.

    13. Once the command executed successfully, type the EXIT command to close the command line interface.
    14. Back in the page choose an options screen, click on continue to restart the computer Windows 8.
    15. Eject Windows 8 installation of the complete optical when media player DVD.
    • How to Fix driver Power State failure error?

      In order to correct the error of the State of drive failure in Windows 8, you must restart the computer in safe mode, and the pilot of the origin must be uninstalled. Step by step instructions below must be followed to get the job done:

    1. When the computer restarts, press the F8 key constantly to display the advanced boot Optionsscreen.
    2. On the Advanced Boot Options screen, select Safe Mode by pressing arrow and press Enterto start Windows 8 the computer safe mode.

    3. Once started in safe mode, log Windows 8 computer with the administrator account.
    4. Click Desktop tiles of the splash screen to go to the screen.
    5. Once on the screen, mouse to the bottom right of the window.
    6. Among the options, click settings.
    7. In the settings pane, click Control Panel.
    8. In the open everything in the Control Panel window, click Device Manager.
    9. On the Device Manager window, expand the category of the device that has some problems.
    10. Once developed, right click on the driver of the problematic device which should be uninstalled.
    11. On the shortcut menu that appears, click on uninstall to remove the selected driver.

    12. Box to confirm device uninstall, click OK to confirm uninstalling the problematic device driver.
    13. Wait until the selected driver is uninstalled, and then restart the computer Windows 8 normally.   Checkurtech

  • How to validate Windows 7 after the migration of the HDD to the SSD on a laptop?

    I upgraded my laptop with a Windows 7 OEM and windows has migrated to the new SSD.

    Now he tells me that my Windows is not genuine, even after that I tried to activate my windows again.

    It's the same machine and the same product key, just a different SSD.

    What should I do?

    Edit:

    Diagnostic report (1.9.0027.0):
    -----------------------------------------
    Validation of Windows data-->

    Validation code: 0x8004FE21
    Validation caching Code online: n/a, hr = 0xc004f012
    Windows product key: *-*-*-*-PVDR2
    Windows product key hash: U3gFvytkRKyyDaU2zHOKAPpt02w =
    Windows product ID: 55041-011-2754703-86388
    Windows product ID type: 6
    Windows license type: Volume MAK
    The Windows OS version: 6.1.7601.2.00010100.1.0.048
    ID: {D17ADED6-DDC8-40A5-8614-BD86AB6E2A88} (3)
    Admin: Yes
    TestCab: 0x0
    LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Product name: Windows 7 Professional
    Architecture: 0 x 00000009
    Build lab: 7601.win7sp1_gdr.150928 - 1507
    TTS error:
    Validation of diagnosis:
    Resolution state: n/a

    Given Vista WgaER-->
    ThreatID (s): n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002

    Windows XP Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    File: No.
    Version: N/a, hr = 0 x 80070002
    WgaTray.exe signed by: n/a, hr = 0 x 80070002
    WgaLogon.dll signed by: n/a, hr = 0 x 80070002

    OGA Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002
    OGAExec.exe signed by: n/a, hr = 0 x 80070002
    OGAAddin.dll signed by: n/a, hr = 0 x 80070002

    OGA data-->
    Office status: 109 n/a
    OGA Version: N/a, 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

    Data browser-->
    Proxy settings: N/A
    User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
    Default browser: C:\Program may Explorer\iexplore.exe
    Download signed ActiveX controls: fast
    Download unsigned ActiveX controls: disabled
    Run ActiveX controls and plug-ins: allowed
    Initialize and script ActiveX controls not marked as safe: disabled
    Allow the Internet Explorer Webbrowser control scripts: disabled
    Active scripting: allowed
    Recognized ActiveX controls safe for scripting: allowed

    Analysis of file data-->
    [File mismatch: C:\Windows\system32\en-US\sppc.dll.mui[6.1.7600.16385], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\en-US\sppcext.dll.mui[6.1.7600.16385], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\en-US\slc.dll.mui[6.1.7600.16385], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\en-US\slcext.dll.mui[6.1.7600.16385], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\en-US\sppuinotify.dll.mui[6.1.7600.16385], Hr = 0 x 80092003
    [File mismatch: C:\Windows\system32\en-US\slui.exe.mui[6.1.7600.16385], Hr = 0 x 80092003
    [File mismatch: C:\Windows\system32\en-US\sppcomapi.dll.mui[6.1.7600.16385], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\en-US\sppcommdlg.dll.mui[6.1.7600.16385], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\en-US\sppsvc.exe.mui[6.1.7600.16385], Hr = 0 x 80092003
    [File mismatch: C:\Windows\system32\en-US\user32.dll.mui[6.1.7601.17514], Hr = 0x800b0100

    Other data-->
    Office details: {D17ADED6-DDC8-40A5-8614-BD86AB6E2A88}1.9.0027.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-BATH55041-011-2754703-863886S-1-5-21-2632269440-3034877388-763067593LENOVOLenovo IdeaPad Y580LENOVO5DCN36WW (V2.03)20120503000000.000000 + 0001 090409South Africa Standard Time(GMT+02:00)1AE4D3307018400FE3LENOVOOC-01 109

    Content Spsys.log: 0 x 80070002

    License data-->
    The software licensing service version: 6.1.7601.17514

    Name: Windows 7 Professional edition
    Description: operating system Windows - Windows (r) 7, channel VOLUME_MAK
    Activation ID: 9abf5984-9c16-46f2-ad1e-7fe15931a8dd
    ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
    Extended PID: 55041-00172-011-275470-03-7177-7601.0000-2582012
    Installation ID: 000401724701945290880302308912032665376104509226579985
    Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
    The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
    Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
    Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
    Partial product key: PVDR2
    License status: licensed
    Remaining Windows rearm count: 3
    Time to trust: 2015/12/17 16:04:12

    Windows Activation Technologies-->
    HrOffline: 0x8004FE21
    HrOnline: n/a
    Beyond: 0x000000000000EF60
    Event timestamp: 12:17:2015 15:26
    ActiveX: Registered, Version: 7.1.7600.16395
    The admin service: recorded, Version: 7.1.7600.16395
    Output beyond bitmask:
    Altered the file: %systemroot%\system32\sppc.dll|sppc.dll.mui
    Altered the file: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
    Altered the file: %systemroot%\system32\slc.dll|slc.dll.mui
    Altered the file: %systemroot%\system32\slcext.dll|slcext.dll.mui
    Altered the file: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
    Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM
    Altered the file: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
    Altered the file: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
    Altered the file: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui

    --> HWID data
    Current HWID of Hash: MgAAAAIAAQABAAIAAAABAAAAAwABAAEAln18JLIDdxYu8ky89I1Eo9DWVvus90a5lmM =

    Activation 1.0 data OEM-->
    N/A

    Activation 2.0 data OEM-->
    BIOS valid for OA 2.0: Yes
    Windows marker version: 0 x 20001
    OEMID and OEMTableID consistent: Yes
    BIOS information:
    ACPI Table name OEMID value OEMTableID value
    APIC LENOVO OC-01
    FACP LENOVO OC-01
    HPET LENOVO OC-01
    BOOT LENOVO OC-01
    MCFG LENOVO OC-01
    UEFI LENOVO OC-01
    ASF! LENOVO-CB-01
    SLIC LENOVO OC-01
    SSDT LENOVO OC-01
    ASPT LENOVO OC-01
    FPDT LENOVO OC-01
    SSDT LENOVO OC-01
    SSDT LENOVO OC-01
    SSDT LENOVO OC-01

    According to your report, you use a Volume License customer who is only available for Volume License customers who deploy Windows 7 in bulk. Where did you got this license?

    If you got through the employer, try to contact the volume license activation center to reactivate:

    Try the number listed here appropriate phone: phone numbers Microsoft Activation centers worldwide:
    http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx

Maybe you are looking for