Recommendation of controller

Similar Questions

• ESXi 6.0 keeps randomly crashing

  Hello, my server ESXi is random crashing. At first I thought it was causeb by a faulty GPU that I went through, but after it Exchange

  still not crash the server. I took a peek @ the vmkernel newspaper and saw errors with the data store but the newspaper continued until suddenly a dumpfile was created "/ var/core/hostd-worker-zdump.001".

  Unfortunately I can't open this file with cat via ssh. Maybe someone can help me with this problem of server crash?

  Kind regards

  Herb

  This is the integrated usb controller 3. After some research, I bought a PCIe controller with a Texas Instruments chip on it. and I can fully recommend a controller chip TI, win8.1 no problem.

  So no more hang ups and things like that. Time to put this baby (server) on the network

• Controller SCSI Raid ESXi 5.5 recommendation

  I'm moving the ESXi 5.5 to another server by using the following:

  
  

  Server Dell R610 with 12G of ram and a Dell PowerVaul 220 s Raid 5 with 12, space 1, 5 - T HD sata

  The Raid Controller is a Intel SRCU42E Ultra320 SCSI PCI-Express X 8 with ext 2 x 68pin ports.

  
  

  I get the error ' call 'HostDatastoreSystem. " 'Of object' CreateVmfsDatastore 'ha-datastoresystem' on ESXi when you try to add storage. I even installed 5.1 but with the same results.

  
  

  Later, after much research and troubleshooting, as well as headaches, I discover that the SCSI Raid card was not compatible with ESXI 5.1, 5.5 only with 4.1 or 4.0

  I begin to scan the cards SCSI RAID but difficult to get one with the above specifications that could be compatible with ESXI 5.5

  
  

  Run out of tricks and do not have the ability to turn the Dell PowerVault 220 s

  May suggest a SCSI Raid PCI - e card with a port Ext. 68pin compatible 5.1 to 5.5? All of the recommendations, difficulty, work around?

  Thank you

  ESXi 5.5 system requirements

  When you install or upgrade to ESXi 5.5, ensure that the host meets these minimum hardware configurations supported by ESXi 5.5:

  1. Your equipment is compatible on the VMware Compatibility Guide. This includes:
  • Systems compatibility
  • Compatibility I/O (network adapters and HBAS)
  • Storage compatibility
  • Backup software compatibility
• You have a 64-bit processor. VMware ESXi 5.5 only installs and runs on 64-bit x 86 CPU servers. He argues also that LAHF and SAHF CPU instructions.
• You have a computer with at least two hearts 5.5 ESXi host.
• The NX/XD bit is set for the CPU in the BIOS.
• Your processor is supported. ESXi supports a wide range of x 64 of multicore. For a complete list of taken processors supported,
• You have 4 GB of RAM. This is the minimum required to install ESXi 5.5. Provide at least 8 GB of RAM to take full advantage of the features of ESXi and run virtual machines in typical production environments.
• Support for hardware virtualization (Intel VT - x or AMD RVI) is enabled on x 64 CPU (to support 64-bit virtual machines). For a complete list of operating systems that are supported with ESXi, hosts running virtual machines with 64-bit operating systems have these hardware requirements:
  • For AMD Opteron systems, processors must be Opteron Rev E or later.
  • For Intel Xeon systems, processors must include support for Intel Virtualization Technology (VT). Many servers which may include processors with VT support VT disabled by default, so you have to manually enable VT. If your CPU support VT, but you do not see this option in the BIOS, contact your provider to request a version of BIOS that allows to enable VT support.

    Note: to determine if your server has 64-bit VMware support, download The utility of Identification of CPU on the VMware site.

• You have one or more Gigabit or 10 GB Ethernet controllers. For a list of network adapter models supported, refer to the VMware Compatibility Guide.
• You with any combination of one or more storage controllers are:
  • Basic SCSI controllers. Adaptec Ultra-160 or Ultra-320, LSI Logic Fusion-MPT and most NCR/Symbios SCSI.
  • RAID controllers. Reference Dell PERC (Adaptec RAID and LSI MegaRAID) RAID HP Smart Array or IBM ServeRAID controllers (Adaptec).
• You have a SCSI drive or a local, off-grid, RAID LUN with unpartitioned for VMS space.
• For Serial ATA (SATA), a drive connected through taken SAS controllers supported or supported integrated SATA controllers. SATA drives are supposed to be remote, no premises. These discs are not used as a partition to scrape by default because they are too far away.

  Note: you cannot connect a SATA CD-ROM device to a virtual machine on a host ESXi 5.5. To use the SATA CD-ROM device, you must use the IDE emulation mode.

• You use a supported storage system. ESXi 5.5 supports the installation and start-up of these storage systems:
  • SATA drives. SATA drives connected behind the SAS controllers supported or SATA controllers support built-in.
    • LSI1068E (LSISAS3442E)
    • LSI1068 (SAS 5)
    • IBM ServeRAID 8K SAS controller
    • Smart Array P400/256 controller
    • 5.0.1 Dell PERC controller
  • SATA drives. Support SATA edge include:
    • Intel ICH9
    • NVIDIA MCP55
    • ServerWorks HT1000

  Note: ESXi does not support using SATA internal disks local to the host server to create VMFS stores of data that is shared between multiple ESXi hosts.

• You have disks Serial Attached SCSI (SAS) supported for ESXi 5.5 installation and to store virtual machines in VMFS partitions.
• You have dedicated disk SAN Fibre Channel or iSCSI.
• You have USB devices supported for ESXi installation.
• You can install and start ESXi a FCoE LUN using VMware software FCoE adapters and network with FCoE adapters discharge capacity
. See the documentation for storage for more information about installing and initializing ESXi with vSphere FCoE software.

• I just upgraded to logic 10.2.4 and now it does not recognize my controller - Yamaha P-95. Yamaha has no new drivers yet. Any suggestions?

  I just upgraded to logic 10.2.4 (and 10.11.16) and El Capitan now logical does not recognize my controller - Yamaha P-95. Yamaha has no new drivers yet. RELOADED drivers available and tried different USB ports. The audio works fine. Any suggestions?

  you need to ask Yamaha if they have a work-around or they intend to release the pilots, have a beta driver or what is their recommendation.

  If the logic is compatible with the operating system then the problem is with the 3rd party controller, and the developer will have to answer it. Past that if you have a backup time machine an instance where worked together your controller, the software and the operating system you can restore to that point

  Use Time Machine to back up or restore your Mac - Apple Support

• NB510-109 - driver missing for Ethernet and network controller

  Hi again

  I replaced the HARD drive on my NB510-109 and installed W7 32-bit teacher. Windows unfortunately has no Driver for my network controller and Ethernet. The seller of Ethernet is 1969 (Atheros), but the driver I found does not work.

  The seller of network controller is 10EC (Realtek or Acer) but I can't find a driver.

  Is there a link where I can load the original driver CD/DVD?

  PS: I could not save the original data of my old HDD for HARD drive has not finished.

  Are you looking for driver LAN or WLan driver?
  I m asking because the network controller could mean the WLan or LAn card.

  However, the laptop supports the Atheros LAN card and you must install the Atheros LAN driver.
  The WLan card is made but Realtek. Its 802.11bgn RTL8188CE card Wlan.

  On the page of the Toshiba UE driver you can find two drivers Atheros LAN to Win 7 32 bit:
  v 2.0.9.9
  v 2.0.11.12

  I recommend you to check them both.

  Realtek WLan driver can be downloaded from Toshiba WLan Portal:
  http://APS.toshiba-tro.de/WLAN/?page=downloads

• Portege Z830 network controller driver needed

  I just bought a Z830 for testing and it looks like a sweet feature.
  I finished an own x 64 Win7 install and downloaded and installed each of the executables driver available.
  After all this, Win7 Device Manager shows an unknown network controller who suggests that I might be missing some drivers.

  I used the installers listed below; does anyone know if there could be any other drivers that are missing?

  USB3.0 Driver 2.1.25.0 11.27 MB
  Ricoh 2.15.17.02 6,73 MB card reader
  Atheros Bluetooth Driver Package Filter (for Atheros model only) 1.0.9 53,11 MB
  Bluetooth Stack for Windows by Toshiba 8.00.13T 78.16 MB
  Driver Intel 8.15.10.2509 86,49 MB
  Driver Intel LAN 16.5 27.03 MB
  Realtek Audio driver 6.0.1.6446 94,35 MB
  Synaptic Touch Pad Driver 15.2.11.1 38,43 MB
  Intel Management Engine Interface 7.01.20.1119 28.35 MB
  Bluetooth Monitor 4.07 5.31 MB
  Driver Intel Rapid Storage Technology 10.1.2.1004 11.86 MB
  Intel Chipset SW Installation Utility 9.2.0.1021 5.27 MB

  (http://www.mytoshiba.com.au/support/computers/satellite/z830/pt22la-001001/download?os=25)

  I tried to re - run the Intel LAN drivers and installed the drivers from Intel's Intel HM65 chipset. No joy of course... any ideas greatly appreciated.

  Post edited by: Egg01

  Hello

  You need the driver LAN or Wlan driver.
  I ve no idea which driver you have already installed but mentioned drivers is necessary.
  I recommend that you check the unknown device by using this statement of troubleshooting:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=78

  This will tell you the name of the controller, and I think that should be enough to get the right driver.

  The comments appreciated.

• P850 satellite with Win 8.1 - Hercules rmx dj controller does not

  Since installing windows 8.1 on my P850, I could not use my rmx Hercules dj controller.

  Team support for the State of Hercules is usb 3.0 eXtensible Host Controller entry is recommended to go to the link and follow the instructions to update the drivers concerned, since it is a the power management issue of the upgrade.

  They have not solved my problem so they said to talk to my pc manufacturer.

  Can any body help or has had this problem.

  + The message was edited: link has been removed.

  Hello

  USB 3.0 eXtensible Host Controller is developed and designed by Intel.
  The point is that Intel has provided specific drivers for Windows 7.
  Why? Because the Windows 8 and Windows 8.1 already use native skins USB 3.0 driver

  + Source: +.
  http://www.Intel.com/support/chipsets/USB3/sb/CS-033977.htm

  So if a Hercules support means, it s a problem of compatibility between the Dj and the USB controller, they should provide a fix for this, because Intel doesn't provide updates of special driver for USB 3.0 eXtensible Host Controller

  By the way: this is a community of users

• Re: Satellite P200-PsPB3C-BB808C cannot locate * multimedia controller *.

  I just upgraded laptop Toshiba on Win 7 neighbors following a bad fall of Vista.
  It's a Satellite P200-BB808C.
  When I started there are two missing drivers, mass storage controller, and a multimedia controller. I did a clean install, starting with formatting the drive.
  Windows 7 loaded a - OK and all Toshiba drivers have been installed in a recommended sequence. I was able to locate the driver for the storage controller mass but still couldn't find anything for the multimedia controller.
  I've been alternating between the site of Canada and the United States with no luck.
  I have also spent a lot of time googling variations of the same question, trying to find some information on this driver. It seems that a lot of people have the same problem.
  So far, the system works fine without glitches or hang-ups.
  Any suggestion would be appreciated.
  Thank you.

  Hello

  To be honest, I don't know about driver multimedia controller you need.
  can post you the code of the provider and I can find the driver? To find:

  1. go into Device Manager, click on multimedia controller and then go into property and then go into the details. You will see a code like for example PCI/VEN_8086 & DEV_27D8 & SUBSYS...

  or http://aps2.toshiba-tro.de/kb0/HTD0302U00000R01.htm

• A Toshiba Satellite L300-01:00 - Sata 2 or 3 HARD disk controller?

  Hello

  I notebokk Toshiba Satellite L300-01:00

  My HD is broken and I would like to replace this HD SSD.
  This phone supports 2 SATA or SATA 3.

  Thanks in advance for your support.

  If you are the owner of the Satellite L300-01:00 should not be a big problem to get details and information about devices built in the notebook.

  I recommend you to install one of the two material great diagnostic tools which are:
  Everest Home Edition
  Sandra Sisoft.
  These two tools were recommended by the members of different communities and I love it too.

  These tools provide a lot of information on the material and I guess you get also information about the properties of HARD disk controller.

• Satellite L30 - 10Y: Win XP - yellow? near bus in Device Manager controller

  Hello

  a problem with the satellite L30 - 10Y PSL33.
  In management of XP - other devices - system management bus controller device - it is to present a question mark with a small exclamation point.

  Maybe reinstall a chipset drivers, but I have not found a right driver in toshiba's site.

  You have an idea on this message and if is it all reinstall drive, what type and the parent link for download?
  Thanks in advance.

  Manuele

  Hello

  Hmm I don't very well if this entry could be linked to a m Chipset driver.
  But you can find the chipset driver yourself.
  Install a tool of diagnosis of equipment as Everest Home Edition and control hardware components. Then, you would be able to download driver chipset chipset manufacturer page.

  But in your case I recommend you delete this first device manager entry.
  Mark this bus controller and press to remove or uninstall.
  Restart the unit.

  Usually the Win XP should recognize and reinstall the device again

• Satellite A210-1AS - need Ethernet Controller driver for XP?

  Need driver for Ethernet Controller for XP.
  They are not on the Toshiba site and I need the driver to connect, someone help?

  Hello

  If I m not mistaken this laptop Equium A210-1AS belongs to the PSAFJE series.

  According to me it was equipped of the * Realtek(10/100M) 10/100MBit LAN chip *.

  So if you need an XP driver for this chip LAN then I recommend you research the Realtek is website owner.

  Best regards

• Satellite A100 - compatibility SSD drive and recommendations?

  Hello.
  I want to replace the original HARD drive in my Satellite A100-811 with an SSD.
  What are the parameters for search? I can just about any 2.5 "SATA II SSD on the market?
  Intel X 25 - M Mainstream SATA SSD 160 GB G2 is compatible?
  Are there recommendations for Toshiba?

  Thank you!

  Hello

  A100 controller SATA HDD support.
  Generally, it should be possible to use the laptop as part of a SATA SSD drive.
  But I also read that not all laptops can properly manage the SSD drive.
  In some cases the SSD update the firmware of the player might help.
  So I can't say with certainty that the new SSD will work properly and that the BIOS would properly recognize the SSD.
  I think you'll need to test the SSD drive
  You could order it on Amazon and could test, in the worst case you could send again
  I did it too with some RAM modules that didn t work in my notebook.

  Please post some details if these updates succeeded or not, it would be interesting to know if you can use it in your A100 because I would use a SSD drive too

• Toshiba Media Controller does not work on Win7 and Satellite P850-12Z

  Hello

  I have a problem with the Media Controller program, do not work at all, I have a Sony Bravia with wifi, try to share music and video and always says "remote library did not allow the connection.

  How can I fix it, also say that when you try to read a file from the context menu 'Play' attempts to connect to the server but never connects.

  + To stream your media, you need the following software and hardware: +.

  A private wired or wireless network.
  Your PC must be connected through a router to broadband.
  Your devices must be on the same subnet as your computer.
  The network location must be set to the home network.
  Either another computer on your network or a device called a digital media converter (DMR) must be present. DMR are devices connected to your wired or wireless that you can control using your computer.

  + Opening Media Controller to allow activation / deactivation (not recommended): +.

  1. click on the start menu.
  2. Enter the 'controller' in the search field.
  3. click on "Media Controller" in the search results.
  4 TOSHIBA Media Controller will open allowing you to set sharing options.
  5 follow the prompts on the screen to set up file sharing.
  6. for more information on the configuration of the devices on your network, see the online help for Microsoft® Windows® 7 Operating System:
  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-Windows-Media-Center-Extender

  * More than info: *.
  http://APS2.toshiba-tro.de/KB0/FAQ2503AX0000R01.htm

• Impossible to install Toshiba Media controller on the Qosmio X 500

  Hello, I downloaded TMC 64 bit from the Web from Toshiba website. When I run Setup I get the message 'Media controller cannot be installed on this computer.
  I run W7 64 bit.

  Thanks for help.

  Hello

  Did you install VAP (value added package)?
  Please check that it is recommended to reinstall this tool.

  Check it!

• Satellite M60 - controller keyboard may be defective

  Hey all, first of all I apologize for my bad English.

  I have a Satellite M60-149, and since 2 days no longer start.
  It stops to load in the Bios Phoenix with 'Please wait' screen the fast flashing of the status bar.

  So I think that the problem is the bios error. But if I hold down Fn + ESC when I turn on, the Bios boot, then windows also.
  In windows, the mouse is OK, but keybord does not work.

  I assume that the problem is as a broken hold down the key. So I physically removed the keyboard and I try with a keyboard external usb.
  Nothing doesn't change, "Please wait" still on the screen of the bios or windows start pressing Fn + Esc to power.

  In my view, keyboard controller is damaged. But I wan't to pay 300 euros for the new motherboard.
  Anyone have other tests/solutions?

  Hi Gianluca_1,

  I m not a technician for computer laptop, but even the keyboard is removed and you get the same problem it seems that the keyboard itself isn't affected but he s strange that it starts when you press FN + ESC

  I think that in this case you need an answer to an authorized service because they can give you an official statement so I recommend contacting the guys and ask for help.

  An alternative, try to load the default settings in the BIOS and try a BIOS update.