Microsoft client for networks works not

Similar Questions

• Microsoft messenger for mac does not work.

  My msn for mac said these things for centuries, I tried to fix it for ages. It is said: 'sign in to Microsoft Messenger failed because the service is not responding. The service is not available or you may not be connected to the internet. "I certainly know my internet works because I can access everything. There is a way supposed to solve this problem, which is where you click on the sign with a different account link, then click on clear history, but I would not have to do something like that, because I want to keep my story, is it possible for me to keep my story and always solve this problem?

  Please visit the following link.
  http://www.officeformac.com/ProductForums/MacMessenger/890

  This can guide you in the right direction...

• Microsoft LifeCam VX-500 works not when connected to the Internet

  Original title: Microsoft LifeCam VX-500 problem

  Microsoft LifeCam VX-500 in office his work on offline, but when I connect to the internet, its does not work?

  Hello

  1 when was the last time it was working fine?

  2 did you last modified the software on the computer?

  I also suggest you go through the steps mentioned in the link and the Coachman.

  Troubleshoot failures to find the new LifeCam hardware

  http://support.Microsoft.com/kb/929087

  See also:

  Don't troubleshoot bad or no video or problems to start the LifeCam software

  http://support.Microsoft.com/kb/933310

  http://support.Microsoft.com/kb/969275

  I hope this helps.

• quick response of iOS for whatsapp works not when the alphanumeric password has been on iPhones

  Hello

  My question was, I was getting keyboard white with no key, just by doing a quick response to whatsapp messages, while the phone is locked and if the phone has been unlocked, it works fine.

  After a quick search, I found that in this case, on all iPhones (I was able to replicate on iPhone6s, 6 and 4S), regardless of the versions of iOS (as long as it takes in charge the quick response), while the phone has been set with digital access code Alpha and locked. If it's a digital password, quick response normally works with the good visible keyboard. From now on, I found that this happens only with Whatsapp Application. Can someone tell me what is an iOS problem or something which Whatsapp team need to check?

  (Also please check on your other app, instant messaging, if get you this error during the series with an alphanumeric password).

  Thank you

  Doudou.

  With the help of iPhone6S

  OS version: 9.3.4

  Since I have never heard of this issue with any other application and WhatsApp is not an Apple application, I suggest you address the problem with WhatsApp and see what they have to say.

• Multisim API toolkit for LabVIEW works not

  
  

  Sorry, I don't have the appropriate license, that's why it does not work...

  If someone is able to do (maybe a moderator): Please remove the post. I can't.

  Ussr123.

• Getting BB JDE Plugin for Eclipse work?

  Hello

  I was now almost two days on this and am nowhere near where I need to be - more no matter I can't do the BB JDE plug-in for Eclipse work not at all.

  Steps, I tried:

  1. download the latest version of Eclipse on the Eclipse site

  2 installed Eclipse

  3 downloaded the BlackBerry Java plug-in for Eclipse v1.1 (full installation program)

  4. install the plug-in

  This succeeded without error reported, and no errors in the log in the root directory but when starting Eclipse eclipses, I get without the slightest trace of what either Blackberry - Blackberry no draft, no menus, no different a simple installation of Eclipse.

  I repeated the above on a clean eclipse install but open Eclipse between steps 1 and 2, to see if Eclipse to initialize anything - same result, without success.

  Then I saw that plugin BB Setup includes in fact a full install of eclipse, so I erased my efforts earlier and just ran the installer of plugin.  This completed without error, but once again there is no trace what whether Blackberry in the eclipse resulting only install - no Blackberry project, no menus.  Another failure.

  Some recent posts offers to install the plugins and packs of component from within a clean Eclipse install via 'Help-> add new software (or equivalent depending on the version of Eclipse used)', but the often detached url of http://na.blackberry.com/eng/developers/javaappdev/javaeclipseplug.jsp just gives me a 404 error, as does a second suggested link on http://www.blackberry.com/go/eclipseUpdate

  Others recommend downloading archives separately, once again on the javaeclipseplug.jsp page, once again it is an option that is not available.

  I don't have a weird Setup or interesting, just Windows 7 32 bit with 4 GB of ram - I can't understand what he could possible be wrong!  Everything I tried, each path suggested at the forum and blog messages either do not work or use the old pages which I can't find the equivalent on the Blackberry site today.

  Any help would be greatly appreciated!  It's incredibly frustrating.

  Very strange.  What folder you installed Eclipse in?  I've seen problems if you install in a folder with spaces (e.g. "Program Files")

  Also, what JDK do you have.  You need JDK 6u10 minimum, but there are problems with the u21 and Eclipse so if you have a u21 he may not work.

• What are the 'elements' in a network connection settings (for example, 'client for microsoft networks') and which should I check?

  the termonology throws me, so keep it simple please. BUT I'm just checking my NETWORK CONNECTIONS and when I discover the properties of parameters / the window will appear which indicates the items that you can check or uncheck.

  'the clients for microsoft networks '.

  "file and printer sharing for microsoft networks".

  "QoS Packet Scheduler"

  "internet protocol (tcp/ipi).

  I can't seem to find the info on what they are and why I need one any of them checked, info by simple description is. I am just a computer and I mainly use a cable (ethernet?) a domestic device (modem?) that gives me access to the internet. So all the jargon on the networks and sharing are confusing. I unchecked 'file and printer sharing for microsoft networks' because it is based on the brief description I guess it's for some sort of office network (or other) computers? Finally, everything seems to work with that uncontrolled. I also disabled everything and I would not be able to connect to the internet, so I conclude at least some of them are essential for the connection to the internet anyway.

  A link would be well as long is it centered on my query mentioned and SINGLE [!]. Thank you.

  PS my interest is safety! I don't want to open doors that do not need to be open.

  question side: why I can't copy this? would it because I have disabled 'file and printer sharing... ". » ? I can copy the text elsewhere although [?].

  I've never paid much attention to the QoS, but as far as I KNOW, there isn't any kind of security risk.

  There is a lot of information and misinformation about the QoS on the Internet connections, and I'm not an expert on this subject.

  From what I understand, if you have a single computer connected to the Internet you won't probably no difference if this box is checked or not.

• Client for Microsoft networks

  Is it safe to uncheck (but without any intention to uninstall) Client for Microsoft Networks and printer and the file sharing for Microsoft Networks in the LAN properties? All services affected negatively, as his dismissal of the Services or disabled accordingly? Why do I need in the first place? I'm not on a network, my computer is autonomous. I'd appreciate advice.

  Yes, go ahead and uncheck the.  See https://www.grc.com/su-fixit.htm

• The administrator password for all computers on the network does not work for ONE of the computers on the network

  original title: the computers of network/administrator password

  The administrator password for all computers on the network does not work for ONE of the computers on the network. I need to log on as an administrator to install software, but the password does not work. It works on other computers, but not this one. How is this possible and how can it be solved?

  Hello
  Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. For more information about this policy, please refer to the below sticky

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

• client for Microsoft Network

  June 26, 2012

  FROM: jgbcorr

  Operating system: Vista Edition Home Premium Service Pack 2

  I tried to reinstall the Client of Microsoft Networks on the PC several times. I had deleted to reinstall because I couldn't connect to the Internet once I have gone through the long process to remove ITunes and its related programs and then reinstalled ITunes from scratch.

  Whenever the Client Setup will fail. I get the following network connections error message:

  "Could not add the requested feature. The error is: the remote procedure call failed. »

  The PC does not have a Windows Installer disk.

  Is there somehow download the Client for Microsoft networks (to another PC) and then copy and install it on the PC with the problem?

  Is there a way to repair the Windows installation to see if it can solve the problem?

  If possible, I prefer not to do a reinstall full Vista and SP 1 and 2. It takes time as well as to reinstall all the programs on the PC.

  Thanks for the ideas.

  jgbcorr

  Thank you.

  When I tried the fix you sent, I got CPP

  HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows NT\.

  It seems that the uninstall deleted Itunes the other inputs of register, also.

  Example: I tried to run another application on the PC and received the following message

  "Could not initialize Windows sockets."

  I reinstalled the software and tried to run again. I got the same message, "Could not initialize Windows sockets."

  I read that I could buy and download the Vista startup repair, burn it to a disk and repair installation of Vista PC. This repair restores the registry to the original installation settings?

  If not, what other options can I short of a complete reinstallation of Vista and then most of the programs on the PC?

  Thank you

  JGBCORR

• I get an error, "Microsoft Hosted network is not available" when I try to connect wifi for my HTC desire V through the laptop.

  I use dell xps 15 laptop in which I use Wired internet.
  I want to use my computer laptop wi - fi as a hotspot to use internet on my HTC Desire V for this I'm using connectify software but when I start HotSpot Wi - FI Access Point Encrypted (WPA2) method of sharing is for me the hosted Microsoft network is not available.

  Original title: Microsoft Hosted network is not available

  I had the same problem and that's what I did on my PC Win7:

  (Forgive me if my English is not good)

  1. verification of my network hosted in my driver. I have run the administrator command prompt and type netsh wlan start hostednetwork

  If you get this message:

  The hosted network could not be started. The group or resource is not in the correct state to perform the requested operation.

  
  

  Then you have the same problem with me. It is the next step.

  2. check my driver. Type of command line: netsh wlan show pilot

  Then I saw that my support pilot hosted network. If your driver does not support hosted network, I suggest update you your driver or reinstall it.

  How FND out your driver and update: Start - Control Panel - system and safety - device (under System) Manager - ECS

  
  

  3. If your drivers support hosted network but still will not start, then the problem could be that you do not have Microsoft Virtual WiFi Miniport Adapter (the same problem happened to me). You can search and download. I tried and installed the new card.

  Now I have Microsoft Virtual WiFi Miniport Adapter under network cards, in Device Manager.

  4. I tried step 1 and it worked! So I can run my Connectify and this error message never showed even once.

  I hope this works for you also.

  Good luck

• When I use the Client for NFS provided by Windows 7, I'm unable to connect. The "mount \\ip address\share Z:" command fails with the error code "the path not found network".

  Identification of customer's Windows 7 NFS UID GID information

  I am trying to connect to the Windows 7 Client NFS on a server running on a computer (VxWorks) NFS.  I am able to properly connect Client NFS software by a 3rd party on the NFS server.  However, when I use the Client for NFS provided by Windows 7, I am unable to connect.  The \\ip address\share Z: mount"command fails with the error code"the path not found network ".  I can't do a ping of the computer running the NFS server.

  The NFS Client operating system: Windows 7 Ultimate, 64-bit

  Data captured by Wireshark

  MOUNT V1 EXPORT call 3rd party client
  Identification information Flavor: AUTH_UNIX (1)
  Length: 32
  Stamp: 0xc7065970

  Machine name: PC
  UID: 1000
  GID: 1000

  MOUNT V1 EXPORT appeal of the NFS client
  Identification information Flavor: AUTH_NULL (0)
  Length: 0

  It seems that the credentials of NFS Client are not correct.  How can I change the flavor of AUTH_UNIX and the UID and GID to 1000?

  Hello VDAEMP,

  As Eddie and Sudarshan has said, the Microsoft Answers community focuses on issues and problems related to the consumer environment. Please join the public IT pro TechNet forums below:
  TechNet - Windows Server
   
  Thank you

• Microsoft soultions for broken Anytime Upgrade do not work!

  I know that the solutions that Microsoft gives for a broken Windows Anytime Upgrade, because I've tried them all. None of them work! The fix me app never successfully, install the remove SP1 or beta commands do nothing, and still I can't update my system! I run Windows 7 Starter 32-bit on Intel Atom on a HP Mini 210-1040NR. Someone help me please! It checks the key, past 10 minutes from upgrade, and then says it failed! Nothing works!

  I finally found the reason. I did not check for Windows Update in so long! When I did, it downloaded and installed MS!. It works perfectly now. In fact, I'm writing this previously Windows 7 starter edition, but which is now final.

• Client vSphere 5.0 works on network, but not via the SSH tunnel

  Hoping someone can help you.

  Seems that others have this problem as well.

  Can connect to the network, but not through an SSH tunnel.

  On the network, I am invited to accept/ignore a SSL certificate.  This does not happen when trying to connect remotely (via an SSH tunnel).

  During troubleshooting, I port passed almost all the ports TCP, starting w / ports 80, 443 and 902.

  Through the SSH tunnel, via a browser, I can successfully access https://127.0.0.1 (VMware server), but the client software will not complete the connection, w / error message: «...» "The client could not send a request to the server."

  Any help would be appreciated.

  Thank you.

  Managed to understand this myself, having invested in a way more time I should have.

  This announcement in the hope that it will help others.

  In your SSH client, port forward with the help of one local loop, IP OTHER THAN 127.0.0.1 (such as 127.0.0.2 for example).

  Port 127.0.0.2:443 before--> IP:443 target

  127.0.0.2:902--> target IP:902

  127.0.0.2:903--> target IP:903

• I have window 7 ultimate I brought it good .working for three months never received a complaint that is not genuine.after three months, Microsoft said that it cannot not active because it is not authentic

  When there I have original box with the product key on the label. the cicle he says Microsoft, window7, authentic. evidence of license... Activate your software for 30 days. Now, after three mountains I receive an error my window is not active. Block by microsoft. I've used it since June, in September, Microsoft said that it is not authentic. Something is not.

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 50
  Code of Validation caching online: 0xc004c4a2
  Windows product key: *-*-62639-DW92Y-RG8TY
  The Windows Product Key hash: VZAa2A2bW4umv6ZMW/yamj0TuVE =
  Windows product ID: 00371-222-2007363-86021
  Windows product ID type: 5
  Windows license type: retail
  The Windows OS version: 6.1.7601.2.00010100.1.0.048
  ID: {7B1629EE-2945-4AF8-81C5-DF3D9F47DBE6} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.120503 - 2030
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 100 authentic
  Microsoft Office Enterprise 2007 - 100 authentic
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {7B1629EE-2945-4AF8-81C5-DF3D9F47DBE6}1.9.0027.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-RG8TY00371-222-2007363-860215S-1-5-21-1608885583-3177030707-3711602930Dell Inc.. Inspiron N4050 Dell Inc.. A06 20111114000000.000000 + 000AE413707018400FE08090409W. Africa Central Standard Time(GMT+01:00)03100100Microsoft Office Enterprise 200712pIL0Z2lfQn4O5OXzOdI6pqp4oiA =89388-707-6733995-6526714 6B9F48E4C912D86

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Professional edition
  Description: operating system Windows - Windows (r) 7, retail channel
  Activation ID: 770bc271-8dc1-467d-b574-73cbacbeccd1
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00371-00172-222-200736-00-2057-7601.0000-2842012
  Installation ID: 019110508845850661092422062595567281983503556172700000
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: RG8TY
  License status: Notification
  Reason for the notification: 0xC004F200 (non-genuine).
  Remaining Windows rearm count: 4
  Trust time: 10/11/2012 00:07:45

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0xC004C4A2
  Beyond: 0 x 0000000000000000
  Event timestamp: 10:10:2012 09:48
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current Hash HWID: MgAAAAEAAgABAAEAAAACAAAAAwABAAEA6GEmC9pEgiYorVpb7I4s4uTc3q + S/G7VLnM =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes, but no SLIC table
  Windows marker version: N/A
  OEMID and OEMTableID consistent: n/a
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC DELL WN09
  FACP DELL WN09
  HPET DELL WN09
  MCFG DELL WN09
  SSDT TrmRef PtidDevc
  SSDT TrmRef PtidDevc
  SSDT TrmRef PtidDevc
  OSFR DELL M08

  Can you help me check it? I have the same problems too