Recommendations on domain DR

Similar Questions

• iSCSI: migrate a volume NTFS of MS initiator initiator sw ESX

  Hello

  We have a host esx 3.5 with a virtual machine running MS Small Business Server 2003.

  Inside the virtual machine, it was MS iscsi initiator sw connection via a vNIC dedicated to a LUN iscsi 1 TB (on a target Openfiler 2.2), formatted NTFS (i)

  On this LUN there are some MS sql Server 2005 databases that we use for the e-mail archiving with a dedicated application (GFI MailArchiver) and some WSUS related files.

  Because our sbs 2003 is a domain controller and multihoming is not recommended on domain controllers (we will have problems), get rid of the vNIC that inside the virtual machine, is dedicated to iscsi, without disrupting the system.

  Our idea is to make visible the vm ESX iscsi sw NTFS formatted LUN.

  Can help RDM (in physical or virtual compatibility mode?) or is it better to recreate the package (big, 1 TB) NTFS volume like a vmdk to a new volume VMFS on iscsi?

  Could you please suggest how can we accomplish this with a minimum off time (possibly step by step)?

  Any help is greatly appreciated

  Thanks in advance

  Guido

  Hello

  Last question: when I change the virtual machine to use a raw disk card, should I specify physical or virtual compatibility mode?

  Either work. Use the virtual if you want to be able to use the snapshot and VCB to backup the RDM. Most people use generally physical. You can switch between virtual and physical as well without affecting some data features.

  Will it work (maintaining the NTFS content) with the two parameters?

  Yes.

  Best regards
  Edward L. Haletky
  VMware communities user moderator, VMware vExpert 2009
  ====
  Author of the book ' VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.
  Blue gears and SearchVMware Pro items - top of page links of security virtualization - Security Virtualization Round Table Podcast

• Fixed ip address but no domain name

  You can configure a server that is not intended to host a Web site, but only a few features such as sharing files, ftp, calendar, etc., with only a fixed IP address? If Yes, what is the simplest step by step through OS x.app for el Capitan?

  The short answer is: Yes you can! However, do not use the local point in your full domain name as it is reserved for the Hello. I would also advice against the use of the private area of dot, but rather to get and use a registered domain space. The reasoning behind it: you may change your mind later, normally sooner rather than later!

  Now for the nitty gritty: there are several excellent resources available on the net and in the App Store.

  I will quote a couple for you:

  http://krypted.com/guides/El-Capitan-Server/ by Charles Edge , who is also the author of a few very good books

  I highly recommend the three books by Reid Bondonis available on the App Store for El Capitan. They are worth every penny.

  Then there's the series of video tutorials by Todd Olthoff at http://www.toddolthoff.com/technology/ECS10.11.html

  In addition, directly from Apple, you can and should https://help.apple.com/serverapp/mac/5.1/#/apd6015d9573 for a lot of information.

  Finally, last but not least there are a multitude of resources available to Apple - Support - manuals

  HTH

  Leo

• Problem with deleting old domain.

  I use a Windows Server 2008 R2, the following errors that appear in the Active Directory Domain Services role.

  Question:
  The emulator operations master primary domain controller in this forest is not configured to synchronize correctly valid time of a time source.

  Impact:
  If the master of emulator main domain controller in this forest is not configured to synchronize correctly time to a time source is valid, it can use its internal clock for the time synchronization. If the master of emulator main domain controller in this forest fails or is otherwise no longer available (and if you have not set up a time server reliable (GTIMESERV) in the domain root forest), other member computers and DCs in the forest will not be able to synchronize their time.

  Resolution:
  Set the PDC emulator master in this forest to synchronize time with a reliable external time source. If you have not set up a reliable time server ((GTIMESERV) GTIMESERV) in the forest root domain, set the PDC emulator master in this forest to synchronize time with a hardware clock that is installed on the network (the recommended approach). You can also set the PDC emulator master in this forest to synchronize time with an external time server by running the command w32tm/config /computer:WS2008R2-DC.relianceinfotech.net /manualpeerlist:time.windows.com /syncfromflags:manual / Update. If you have set up a time server reliable (fiable (GTIMESERV) GTIMESERV) in the forest root domain, set the master of emulator main domain controller in this forest to synchronize the time from the domain hierarchy forest by w32tm/config /update /computer:WS2008R2-DC.relianceinfotech.net running domhier root.

  and another question

  Question:
  The relianceinfotech.net field is that a single domain controller works.

  Impact:
  In case of failure on the domain only of the domain controller, users will be able to connect to the access or domain resources.

  Resolution:
  Add one or more additional domain controllers to the domain to manage authentication and authorization requests where there is a failure on the domain controller available unique in the field.

  the problem is that I don't have a relianceinfotech.net this area is the last and the area in which work now is relianceti.net. I just want to know how to solve that and remove these warnings of projection.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Errors, addition of Win7 workstations to the domain

  Greetings!

  I just started one already existing, although that paralyzed, installation of Windows Small Business 2011. Active Directory seems to be set up correctly, and I have no problems connecting to shared folders or devices by using the credentials of domain.

  However, when I started to unroll the field to the client workstations, I get the following error:

  

  I changed the map IPv4 settings to use the DNS on the PDC with the installation of Active Directory, but still no luck. I suspect the problem may lie in the search box on the DNS forward and as such have copied the text of output of dcdiag.exe/test: DNS:

  Directory Server diagnosis

  Perform the initial configuration:

  Trying to find the server at home...

  Home Server = BAF BAF in SR-1

  * Identified AD forest.
  Made the initial collection of information.

  Make the required initial tests

    
  Test server: Default-First-Site-Name\BAF-BAF-IN-SR-1

  Commencement of the trial: connectivity

  The host 883eda9b-b3d2-44e2-b2cd-c2df4c0241a6._msdcs. BAFF.local able

  not be resolved to the IP address. Check the DNS, DHCP, server

  name, etc.

  Received the error checking of LDAP and RPC connectivity. Please check your

  the firewall settings.

  ......................... BAF-BAF-IN-SR-1 failed test connectivity

  Primary testing

    
  Test server: Default-First-Site-Name\BAF-BAF-IN-SR-1

    
  Commencement of the trial: DNS

          

  DNS tests are running and not hung. Please wait a few minutes...

  ......................... BAF-BAF-IN-SR-1 failed test DNS

    
  Running partition tests: ForestDnsZones

    
  Running partition tests: DomainDnsZones

    
  Running partition tests: schema

    
  Running partition tests: Configuration

    
  Running partition tests: BAFF

    
  Running tests from the company: BAFF.local

  Commencement of the trial: DNS

  The test results for domain controllers:

             
  DC:-BAF-BAF-IN-SR - 1.local

  Domain: BAFF.local

             

                   
  TEST: Basic (Basc)
  Error: No LDAP connectivity
  WARNING: adapter

  Intel (r) [00000007] 2-82566DM Gigabit Network Connection has

  invalid DNS server: 192.168.1.175 (BAF-BAF-IN-SR-1)

  Error: all DNS servers are invalid

  No host record (A or AAAA) not found for this domain controller

  WARNING: no DNS RPC connectivity (error or Server non Microsoft DNS is running)
          
  Summary of the test results for DNS servers used by the domain above

  controllers:

          

  DNS server: 192.168.1.175 (BAF-BAF-IN-SR-1)

  1 break on this DNS server test

  Name resolution does not work. _ldap._tcp. BAFF.local. failed on the DNS 192.168.1.175
                
  Summary of the results of the DNS test:

          
  AUTH, Basc, Forw, Del, Dyn, RReg, ext.
  _________________________________________________________________
  Domain: BAFF.local

  BAF-BAF-IN-SR-1 PASS FAIL n/a n/a n/a n/a n/a
          
  ......................... BAFF.local failure test DNS

  Any help that can be provided would be appreciated. Admiteddly, this is my first DNS configuration completely on my own, so the error could be very obvious at this point.

  Thank you very much!

  Hi James,

  Thank you for your detailed answer, I appreciate your efforts.

  However, the question you posted would be better suited in the TechNet Forums; We recommend that you post your query in the TechNet Forums, since we support detected for the same thing:

  TechNet: http://social.technet.microsoft.com/Forums/en-US/smallbusinessserver/threads

  Thank you for your understanding.

• solve this problem, you must prove the ownership of the domain by creating a DNS record. Use the settings below.

  I neeed that domain name for the necessary and I expect after 5: 00
  Please solve my problem now

  Your domains > arshfne.com > parameters of the field
  Hello
   
  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro
   
  Hope this information helps.

• I have given rights of domain users to log on locally, but still cannot connect (Server 2008)

  Hello. I ' using server2008r2 on virtualbox. I'm going through the 70-640 exam.

  I went through the steps described in this article http://technet.microsoft.com/en-us/library/ee957044 (WS.10) .aspx to add domain users rights to login locally. I ran gpupdate/force and me rebooted the machine, but I can not yet connect locally. I get "you cannot connect because the logon method, you use is not allowed on this computer.

  Any ideas?

  I changed the default domain policy Instead of the default domain controllers policy. ::) Works now.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:

  Windows Server 2008 IT Pro Networking Forum: http://social.technet.microsoft.com/Forums/en-US/windowsserver2008r2general/threads

  Kind regards.

• Give permission to the domain users to replace the file in the folder created by domain admin

  We have a domain controller in our network. also we have the domain users and domain administrator. We create a batch file that copies a file to the folder by using a script to the server policy when users open a session input/output. However if the admin area access system cant use overwrite file in the folder. We want to give permission to the domain users to replace the file in the folder created by the domain administrator.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en/category/w7itpro, w8itpro, windowsvistaitpro, windowsxpitpro, windowsintune

  Hope the information is useful.

• Edit GPO does not work in the domain Server 2008

  Failed to open the Group Policy object, you can have right does not fit the domain Server 2008

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• AppLocker-do parameters taken into account on the xp on domain machines

  I work with Applocker on Windows Server 2008 R2 and I wanted to know if

  the parameters defined for the domain user. If a user on the domain is using a Windows Xp machine, the application will be
  rule also work for them or it works only for the Machines of Windows 7?

  Hi JaceMyrie,

  Thanks for posting in the Microsoft Community.

  However, the question you posted would be better suited in the TechNet Forums; We recommend that you post your question in the TechNet Forums to get help:

  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

  If you have any other questions or you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• Application to search the users access to several folders in domain

  Hello support.

  Can we could find it, who are the users have access to multiple records in a domain network, where the root folder is shared and there several subfolders inside.
  How do to know which user has which access on all files in a folder shared from the root.

  Hi John,

  The question you posted would be better suited in the TechNet Forums.

  I would recommend posting your query in the link below:

  http://TechNet.Microsoft.com/en-us/Windows/bb264763.aspx

• Windows XP Shared printer - can't connect from another domain

  We have a shared printer on a Windows XP Pro WS, which is in a new area (we are currently migrating to a new domain... long story). This printer is shared with access to all Documents Print/manage the printers/manage. However, the machines in the old domain cannot connect to this printer. Back, he throws a «...» Access denied error. Normally I would expect the client machine to connect to the shared printer to the seizure of another name of user and password, but this does not happen.

  • It runs Windows XP SP3
  • Firewall is DISABLED
  Hello
  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads
  It will be useful.

• Im trying to add a windowx xp pro pc to windows 2008 r2 domain controller. He said: network path not found. Help, please

  Im trying to add a windows xp pro pc to Windows AD 2008R2 controllers.

  All the settings like DNS etc are correct on the target computer, but when I give the domain admin credentials to add the computer to the domain, it says "the following error occurred while attempting to join the domain a.b.c.d. The network path was not found.
  Please notify

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• event ID 576 displays the user name or domain name: only displays privileges: is this normal

  I was checking my audits of security one came across one with event ID 576

  I noticed there was no 'user name' or 'Domain name' is this normal

  Date: 21/05/2012 Source Security

  Time at 12:01 category: privilege use

  Event ID of success A 576

  Authority/network for the user network service

  Computer by DEFAULT-HOME-EN

  Description

  Special privileges assigned to the new logon

  User name:

  Domain:

  Login ID: (0x0, 0X3E4)

  Privileges: SetAuditPrivilege

  SeAssignPrimaryTokenPrivilege

  SeChangeNotifyPrivilege

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  ITPro Windows XP Forum

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

• domain not available when connecting, using the domain removed pc

  I was good on a pc running XP Pro, sp2. Having a login screen that won't give me the option of resetting passwords (after entering a guess) and told me that the domain is not available. It doesn't have an administrator listed in the drop down menu to the user. I tried to use a reset disk at startup, which said that it defined my Admin password. However, I keep getting 'no domain' error when I try to use it. I typed in 'Administrator' to connect and used the given password, but always get the same answer «no available domain» I don't have access to the domain (pc comes from a medical office, which has since closed).

  Hi AdgChandler,
   
  Here is a link that might be useful for:
  Cached domain logon information
   
  I would recommend you to contact the owner of the computer to get the password reset.
   
  Note: Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. For more information about this policy, please refer to the post-it note:
  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd