Problem with deleting old domain.

Similar Questions

• Problem with deletion of snapshots

  Hello

  I have a problem with deletion of snapshots for virtual machine running on ESXi 3.5. I had a problem with the lack of free space on the drive where VM is hosted. I managed to free up space and wanted to commit snapshots (delete) to free additional space. Unfortunately, at the time of the withdrawal of clichés that I ran out of space again on this store now I'm stuck with clichés present in the store but not visible in the Snapshot Manager.

  Any suggestions on how I can get rid of these pictures now? All I can think is move VM converter of this virtual machine to a new one.

  Thanks, Marcin

  The reason that you ran out of space is the way a "Delete All" is handled.

  I guess in your case a 'Delete All' may temporarily need up to approximately 115 GB of additional disk space. Troubleshooting VM snapshot problems perfectly describes the process. Take a look at the animation in the "process behind 'Remove all' snapshots '.

  So what you can do is:

  -Free up enough space, create another cliché, and then do a "Delete All".

  -Cold clone or V2V the VM in another data store

  -Recreate the vmsd file based on the instantaneous channel from the header vmdk files and delete the snapshots one by one starting with the first (oldest) snapshot. If you want to try this make sure you fully understand other snapshots that it will end in the corruption of data!

  Due to the size and the possible impacts on the storage I recommend doing this during peak hours and with the virtual machine shut down.

  If you have a different available datastore (~ 300GB), I would recommend cloning. This does not affect the original files in case something goes wrong. If the clone works, you can safely remove the "old" VM and files and migrates the virtual computer is back to datastore original.

  André

• Problems with my old email account

  OK, so when I was about 9 or 10 years old my aunt made me a Microsoft account to my xbox using e-mail, known as * address email is removed from the privacy * but his was a good few years I used that email so that when I connect I have to use my one email that I added to identify you , but I can't really do anything with my account because only with the email from yahoo because it is now removed because I have not used in more than 12 months, if anyone has any advice please and thank you.

  Hi Jesus,

  If your * address email is removed from the privacy * account is deleted, you must contact the support of yahoo for the re-opening of the account. You can also create a new account from Microsoft, then sign using your new Microsoft account and use your Microsoft account with your Xbox.
  http://support.Xbox.com/en-us/browse/my-account/Microsoft-account

  I hope this helps. Let us know if you have other problems with Windows in the future.

• Problem with Delete Subproperty

  I wanted to delete a global container of Station with stored results init.

  The expression I used is

  StationGlobals.StoredResults.DeleteSubProperty (Parameters.Step.Name, 0x400000)

  Parameter.Step.Name is my search string. and in the Option property tried to use 0 x 400000 substitute variable Notdeletable.

  Problem here is that it works for the execution of a few as there is no problem in removing the Subproperty for 4 or 5 times. After that it only removes subproperty.

  And the same problem, I did not see in OperatorMode. This problem only occurs in the sequence editor. I use TestStand Ver4.2.1.

  Is there no work around for this or any other option to forcefully remove the subproperty.

  Thanks in advance,

  Christian M

  Larsen and Toubro Limited

  Mysore. India.

  Hi Share_Good,

  He had some problems with the file you attached. I made a few changes that seems to make it work the way you want and simplify things. I added comments to help explain changes in the file. Please let me know if you have any questions about the changes. I was unable to reproduce the error you posted, but I think that these changes could solve the problem, because one of the issues that I fixed in question is not cloning the property you obtained using GetPropertyObject before setting another property that has as it's the suproperty (property can have one of their parents If you need to make a copy and store the copy not the original). Also, make sure your Locals.StepResult is a variable of object reference as I have in the file attached sequence rather than a container.

  I also created a version of the file, SequenceFilePostResultListEntry2.seq, that uses an array of containers to store the results instead of the subproperties, allowing the stage names to be anything, including having spaces and '.' characters.

  Hope this helps,

  -Doug

• Problem with deletion and Redownloading iTunes and Quicktime. Error: unavailable network resources

  Original title: trouble with deletion and Redownloading iTunes and Quicktime

  I am trying to remove iTunes in my computer through my control panel, but its telling me that it cannot remove, because of unavailable network resources.  I accidentally deleted quicktime then this all started.  Before iTunes was working.  When I try to re-download the ITunes it says that you must delete old version first.  Please help me someone with a great idea?

  Hello

  Step 1: Check if you are able to uninstall iTunes in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.

  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.

  4. When prompted, click on restart to restart the computer.

  Step 2: Pass through 'Verify iTunes and related components are completely uninstalled' in the article below: http://support.apple.com/kb/HT1923

  Then try to reinstall iTunes .

• Problem with an old Dell desktop computer

  Hey guys :) first post here! Happy to be part of the community!

  My father has so some of these old Dell desktops at work that were purchased second-hand and some of them don't work at all. I was asked to provide assistance and we managed to get most of them and running outside.

  Long story short - when you plug the power cable into the PC, the fan runs for a very short time and the power light flashes green light after that the computer is ready to go.

  The problem with this particular computer is that when you plug the power on the computer the CPU fan starts to spin and power light blinks with a light orange and never stops. By pressing the power button has no effect. The power supply of the computer has been replaced, but the same problem persists (the power supply works normally on other computers). All the problematic capacitors have been replaced on the motherboard (which fixed this issue with other computers) but this has still not had any effect.

  The computer has been tested with its minimum parts bare, stripped of all readers of storage, RAM and anything else, but is still unable to boot to the BIOS or do anything.

  My question is - is this a known problem and what measures would be a good thing to determine the cause of the problem?

  Unfortunately, I do not know the exact model of the computer, but I have some pictures of what you can find here:

  

  

  

  

  

  Feel free to ask for additional information if required.

  Thank you in advance!

  CAP'

  It is an Optiplex GX280 SFF.  Regulatory model DHP

  http://www.Dell.com/support/home/us/en/19/product-support/product/OptiPlex-GX280/manuals

  Shipping date: November 30, 2004, country: Denmark

  The model is written around the ring on the power button.

  The behavior is a Committee with bad traffic and bad diet.

  

• Problem with deleted game

  Hello

  I have recently uninstalled a game from my PC through Control Panel control/uninstall. But my problem starts when I finished tne uninstall. In folder where was a game that I uninstalled another game that has been deleted with the uninstallation of the first game, because the system has deleted all the folders and subfolders. Now, when I run the instalation of a game I acidentally removed with the uninstalaltion of the first part it is said: the game is already instaled. You want to start the uninstall? When I click Yes, nothing happens... A system can not install a game because it was not properly uninstalled and it "thinks" it is installed on my machine and cannot uninstall because the game egsists not really starts. I run Windows 7.

  Help, please. Thank you.

  Hello docleen,

  Thanks for posting your question in the Microsoft Community.

  I understand that you have difficulties to install a game that you deleted accidentally. I would certainly help you to fix this problem.

  To better understand the issue and provides that you open troubleshooting steps, we start with two questions:

  1. what game are you talking about?

  2. who was the game that you actually deleted from your computer?

  Please do not respond with more information on the topic to provide you with the best solution.

  If you have other problems with Windows, please post in the Microsoft Community. We would be happy to help you.

• Oracle 10g - problem with "DELETE from TABLE WHERE ID in (1,2,3)" (use cfqueryparam)

  Hello, everyone.

  I have problems with executing a DELETE statement on an Oracle 10 g server.

  DELETE 
  FROM tableA
  WHERE ID in (1,2,3)
  

  If there is only a single ID for the IN clause, it works.  But if more than one ID is provided, I get an error message "SQL command" not correctly completed.  Here's the query as CF:

  DELETE 
  FROM TRAINING
  WHERE userID = <cfqueryparam cfsqltype="CF_SQL_VARCHAR" value="#trim(form.userID)#">
       AND TRAINING_ID in <cfqueryparam value="#form.trainingIDs#" cfsqltype="CF_SQL_INTEGER" list="yes">
  

  Someone at - it works with Oracle that can help me with this?  I'm a developer experienced in MS - SQL; Oracle is new to me.

  Thank you

  ^_^

  So much worse... a colleague just told me I should always use parentheses around the values in the IN clause.

• Problems with the old game; Total Annihlation. Display a horizontal bars, turns into a rainbow of colors. Help, please. I love this game.

  I have display problems with a game that I just downloaded. The game is Annihlation Total; the game does not appear correctly. He works for a few seconds, all the graphics turn Rainbow and I can't seem to stop. Tried to run in compatibility mode; did not work. I hope there is a solution because this is one of my favorite games...

  Hi razorbladeapple,
  
  (a) what operating system do you have? And also to indicate the version?
   
  There is currently no information on the compatibility of the game with Windows 7.
  You can also try to check compatibility here: http://www.microsoft.com/windows/compatibility/windows-7/en-us/Default.aspx
   
  (b) is the display horizontal bar change only whem you play the game?
   
  (c) you have installed the updated display drivers?
   
  Some devices have drivers you need to install yourself. If you download a driver that is not self-installable, follow these steps:
   
  You must be logged on as administrator to perform these steps.
   
  For more information, see: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly
   
  Update drivers: recommended links
  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links
   
  Contact GT Interactive and check what they have to say about the compatibility of the game with Windows 7 because they are the best people to offer support.
  
  Aziz Nadeem - Microsoft Support

• problem with deleting safely removable media

  whenever I'm trying to remove my USB drive I get this error:

  This 'nom_peripherique' device cannot be stopped because its use in.

  Close programs use this unit maybe and try again later.

  so I go to Task Manager and close all programs I can think can possible cause the error

  and tried again, still the same result

  so I tried to close all programs, the list say except windows those needs to stay connected (were about 20 left) and tried again

  always the same stupid mistake.

  Microsoft can't make it so that it shows what programs are using the camera? or even better give an option to close the programs for you?

  Best regards

  Vermilion

  Hello

  ·        This happens every time every time you plug-in the device to the system?

  ·        Since when are you facing this problem?

  It may be that your USB flash drive is still using some of the system files or it could be that there is little file that is transferred to your system. Restart the computer and check if the problem is solve. It may be that some of the files on your USB device are corrupted or infected with the Virus. I suggest you analyze your USB devices with security software and checking, just to make sure that there are no corrupt or infected files.

   

  Step 1:

  Try to remove the USB device in safe mode and check. Follow the steps mentioned below.

  a. restart the system and keep tapping F8 until you reach the start menu.

  b. Select safe mode from the list and press ENTER.

  c. check to see if you are able to open the application without any problem.

  For more information, see the article mentioned below.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  Step 2:

  Format the USB.

  Note: I suggest you to save important data which is present in the USB key given that formatting the USB device will erase all the content that is present in the USB.

  a. connect the USB device.

  b. Click Start menu and click computer.

  c. right-click on the drive letter (indicating the USB device) and click on Format.

  For more information, see the article mentioned below.

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have a problem with deleting a password of a program in IBM lotus 123.

  Original title: IBM Lotus 1-2-3

  I'm under Lotus 123 97 on Windows 7.

  I'm having a promlem remove a PASSWORD in a program.

  I, ve been on SECURITY, then on RESERVATION, but from there I met problems.

  Any suggestions?

  Hello Norm,

  Welcome to the Microsoft community where you will get the best solutions for Windows related problems.

  I understand you have questions, remove the password of IBM Lotus program. The question you have posted is related to IBM Lotus and would be better suited to IBM Lotus support.

  I suggest you to check with the support of IBM Lotus for more information.

  http://www-01.IBM.com/software/Lotus/products/123/

  I hope this helps you get the password removed. If you have problems with Windows in the future, please post in the Microsoft Community.

• I've just updated my billing information on a new map of credit due to a problem with my old and Adobe immediately charged me for €1

  So after that I had a problem with my credit card and could not be charged, I've just updated my billing on a new credit card information.
  Just as I saved the new billing information, my banking application tells me that I am charged €1 by Adobe.
  Is - to check if the credit card details are valid?

  Because on my overview of the Adobe account, I always get the advice to update my information, also the €10,70 for my photography plan has not been charged.

  
  Any suggestions?

  I already solved it myself, my banking application displays validation bookings, that of other apps.
  If it's just a validation.

• Problem with deleting emails

  My mailbox is getting overloaded with email and I'm unable to remove number of emails...

  Appears when I try to delete some of my old emails, the system does not respond and deos not delete files.  I tried everything to remove some of these emails without success... I also tried to delete the mu, but it does not work...

  Any suggestions?

  Assuming you are using Outlook Express...

  Spend most of your messages out of the Inbox, if you can and move the messages you want to record off deleted items, and sent items. Locate the OE message store and then close OE.

  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

  With OE closed, find the Deleted Items.dbx and Sent Items.dbx files and delete them. New files will be created automatically when you open OE.

  Compact all folders as described below.

  To avoid this in the future:

  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095

  After you're done, followed by compacting your folders manually while working * off * and do it often.

  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the processors and causes a multitude of problems such as time-outs and account setting changes. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• problem with deleting snapshot

  Hi all

  I had a preview of the virtual machine on a server esxi 4.1, build 320137

  When I later (1 day) removed the snapshot (action to "remove all" in the snapshots in vSphere client Manager), I got an error saying:

  Delete all snapshots

  < myvmname >

  Cannot access the file

  < not specified

  file name > because it is

  locked

  root

  At this point is no longer the snapshot, according to the vSphere client as well as the command line:

  / vmfs/volumes/4cb6cf27-7 d 884680-68bf-00221965eca8 # vim - cmd vmsvc/snapshot.get 176
  Download Snapshot:

  (176 is the vmid of my machine)

  but in fact, the snapshot is always present, with delta 3 (one for each disc) of about 1 GB (it's a busy machine, with 1 disk 16 GB o.s.

  and 2 200 GB, nearly full drives)

  the question is: what can I do to merge the delta vmdk into their respective discs?

  Or what I can do to create 3 new discs containing all the data, for example using vmkfstools

  (then I'll replace it with these new old records in the vm configuration)

  Operations can also be done in turning off the State without any problem (night...)

  Thanks in advance,

  Andrea

  printing to see it regularly here :-)

  First, take a look at the contents of the virtual machine or watch the vmx to check file that VMDK is being used.

  one you have you need to consolidate the VMDK for this virtual machine must be downwards as in the contrary case, it locks files.

  and then you start vmkfstools-i/vmfs/volumes/datastorename/vmname/vmdk-from-vmx-file new.vmdk

  You will need to run it for all discs, you have on this virtual machine.

  This will consolidate the VMDK, but this alters the 'old'. You must then modify the virtual machine settings and remove the old drives and add custom discs using the new vmdk, you created.

  Once the virtual machine is running, you can clean the old files...

  Good luck

• Problems with deleted emails do not delete

  I have an iPhone 6, when I delete the mails from gmail and/or icloud times, the emails appear back in my Inbox. I sometimes have to remove emails for 2-3 times to finally remove. This started happening after the download of the update IOS 9... I had and iPhone 6 more and it would go with the upgrade of the thought. Then I thought it might be something with my carrier, Verizon, but a co-worker has ATT and is seen the same problem. I took it to the apple store with no solutions... Please see this on the next update...

  Try resetting your e-mail account. First close your Mail application completely from the window of the selector app by double clicking the Home button and drag the email preview pane up until it disappears from the display. Then go to settings > Mail, Contacts, calendar > find your e-mail provider and click on the account. On the next page, delete the account. Then perform a forced reboot. Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears. Then go to settings > mail... and to add the account.