'reconfigure the drives.

Similar Questions

• Change the drive letter when connecting via USB?

  When I plugged my DroidX (via USB) to my box "XP home", I don't have my 2 USB powered external drive enclosures. Thusly, Motohelper installed and configured itself, but took possession of the letters 'F' and 'G' driver previously used by my two external in the process.

  I need to get those back from some apps are looking for files in these places and I would rather not start reconfiguring all my apps on my XP machine.

  I looked in disk management, but don't see not all references to F or G, a frontend for the Motorola drivers for this problem.

  Someone knows a way to recover my drive letters and to reconfigure the drive letters of Motorola to my taste? (System Restore is out...)

  How to change a drive letter

  To change an existing drive letter on a drive, on a partition, or a volume, follow these steps:

  1. Sign in as an administrator or as a member of the Administrators group.
  2. Click Start, click Control Panel, and then click performance and Maintenance.
  3. Click Administrative Tools, double-click computer management, and then click disk management in the left pane.
  4. Right click on the drive, the partition, the logical drive or volume that you want to assign a drive letter to and then click change drive letter and paths.
  5. Click change.
  6. Click assign the following drive letter if it is not already selected, click the drive letter that you want to use, and then click OK.
  7. Click Yes when you are prompted to confirm the drive letter change.

  The letter of the drive, partition, or volume that you specified is changed, and the new drive letter is displayed in the appropriate drive, partition, or volume in the disk management tool.

  How to remove a drive letter

  To remove an existing drive letter on a drive, on a partition, or a volume, follow these steps:

  1. Sign in as an administrator or as a member of the Administrators group.
  2. Click Start, click Control Panel, and then click performance and Maintenance.
  3. Click Administrative Tools, double-click computer management, and then click disk management in the left pane.
  4. Right click on the drive, the partition, the logical drive or volume that you want to assign a drive letter to and then click change drive letter and paths.
  5. Click Remove.
  6. Click Yes when you are prompted to confirm the deletion.

  The drive letter is removed the disk, the partition or volume that you specified.

• I use a USB key to solid state. On my Win7 PC, the drive is e: on my XP PC, the drive h: I need the drive must be the same.

  How I change one of them?

  I need them to be of the same kind when I run Outlook on two computers (the .pst file is on the USB key), the path to the Outlook folders must be the same or rules Outlook fails when you try to copy a message from the Inbox to another folder in Outlook e-mail.

  You probably have one of these drives to multi format card on your XP machine who caught a lot of drive letters.  If you don't mind not reconfigure your Outlook rules one last time, I suggest assignment drive letter Z (or something else, towards the end of the alphabet) to your external drive.

  With the drive connected to one of the computers, open disk management:

  • Right click on my computer > manage > disk management
  • Right-click on the drive letter in the upper pane corresponding to the external drive and select "change drive letter and paths".
  • Click the button change
  • Select the new letter drive and OK your way out

  Repeat on the other machine

• 'Foreign' status on the drive to reinstall?

  That means what it means when I reinstall a drive failed, and rather than entering a reconstruction, it shows the State as 'foreign' and the only thing I can do with the disc from OMA's blink eyes or of Nations United-blink the drive?

  KBeau

  You will need clear the foreign configuration, reconfigure the disk as a hot spare and the rebuild will begin.

  Clear foreign configuration: select the OpenManage controller, go to the "Information/setting", "Controller"tasks"tab select 'Configiration overseas Operations', click 'run '.  On the next page, click 'clear '.

  To reconfigure spare: switch to "Physical disk" display, on the 'available' for this reader task, select "assign Global hot spare."

  I have this drive is the same type (SAS vs SATA), with a capacity equal to or greater and there is no other VDs degraded on the controller, the reconstruction will start.

• Reconfigure the virtual disk using OpenManage of RAID 0, RAID-5

  I apologize for the spacing.  I'm having a little wrong with this forum edit my post.

  My small business has had a T610 run for a few years with the following configuration:

  T610 Server

  PERC 6 / i controller

  4 physical disk 1 TB

  Virtual disk 0 size 1 800 GB RAID - 5

  Size of the virtual disk 1 992 GB RAID - 5

  Virtual Disk 1 was running Exchange and everything else on VD 0.

  Last weekend, I had a breakdown of table flat due to the failure of a damaged drive on Windows SBS 2008, who couldn't recover. When I contacted support Pro and got a new drive, I was told not to recreate the same virtual drives and use one.

  The local tech and I have been quite underlined and used the Perc 6 / I BIOS to recreate the exact configuration. Then, we had to use Backup Exec 2010 to restore the data. Somehow, we have selected by mistake instead of RAID 5 RAID-0 on recreation of the two virtual disks.

  So now, I have the following configuration in OpenManage:

  Virtual disk 0 size 1 800 GB RAID - 0

  Size of the virtual disk 1 992 GB RAID - 0

  I called Dell and gave instructions in OpenManage on how to reconfigure a virtual disk by adding a physical drive and conversion to RAID-5. My problem is reconfigure is not an option in the dropdown menu, I am told, because I have two virtual disks that have stripes.

  I have the ability to drive to go to 1 single virtual disk, given only Exchange is on the second and I can move, then unmold Virtual Disk 1. So my plan is:

  Full backup tape.

  Move Exchange off the drive sitting in virtual disk 1 to disk on virtual disk 0.

  Remove the virtual disk 1.

  Add a 5th physical HD.

  I hope at this point OpenManage will then give me the option in the drop-down list to reconfigure Virtual Disk 0.

  The option to Reconfigure in OpenManage will appear after that he sees only 1 virtual disk?

  Hello

  KRoy66

  The option to Reconfigure in OpenManage will appear after that he sees only 1 virtual disk?

  Yes, the ability to reconfigure should be available as soon as you remove the second table off readers. Technicians are you talked with correct you cannot reconfigure a table in slices.

  I know that you went through the entire process of relocation and restoration of backup, but it is preferable that do you it again. Let me explain why your table has been configured in this way, and why you may need to reinstall again.

  There are limits on the partition. To create a partition more of 2 TB, it must be TPG. In order to boot the system from a partition GPT Board must be set to UEFI mode. The problem you will encounter when trying to create a large RAID 5 is that you will not be able to use more than 2 TB of it. You create a new table in slices to use the extra space.

  If the system card is already set to UEFI mode then you should be able to convert the GPT partition and expand to necessary to hold account space. If you have installed the operating system with the system of administration established on the MBR can change in UEFI and conversion of GPT likely to cause BONE to be unstable if you are able to boot on it at all.

  I think you need to save yourself a lot of hassle and do this upgraded correctly. I know it will be a lot more time to restart, but you should set the UEFI boot mode, remove the two RAID 0, create the new large RAID 5, reinstall the OS and then restore the backup.

  Do it right now probably will save you a lot of time.

  Thank you

• WiFi disabled in Windows Boot Camp 10, can not reinstall the driver

  Running an end of 2013 the MBP 15 "retina

  I got 10 Windows Boot Camp installed for more than a year without difficulty. But suddenly, my wifi doesn't work in Windows 10. He could see networks and said it was connected, but it has never been an internet connection.

  Assuming that it was the result of an update, I

  1 uninstalled all Windows regular updates that I can

  2. uninstalled the Broadcom driver

  3 downloaded the last Boot Camp Assistant WSS and installed

  But now I can't reinstall a driver for the Broadcom card! I tried to install WSS, but the network card remains in my device without a driver manager. So I tried to install the individual installation files in the folder of Broadcom. Still did not work. I even tried to extract all files Broadcom installation and manual installation of all the drivers. Windows 10 seems to recognize that the "ac" driver is the right, but always tells me that the driver installation failed without giving details.

  What else can I try?

  At your facility in W10 a W7/W8.1 update?

• Reinstall the driver for Nvidia GeForce GT 650 M

  How can I reinstall the driver for nvidia geforce gt 650 m on my MacBook Pro (retina, medio 2012)? And where can I find the driver?

  Yo, why yo need to install an additional driver?

  Mac OS is delivered with all necessary records for the components provided by Apple.

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• I want to transfer my files to my external hard drive free windows click on my mac, it recognizes the drive but I can't nothing or see the files. Any help is appreciated

  I need to transfer my files to my external hard drive free windows click on my mac.  I can see the drive but cannot do anything or transfer.  any help is appreciated.

  The drive does not appear in the Finder?  Do you get an icon for it on your desktop?

  You say that it recognizes the drive, how exactly, what is the point?

  What happens when you try to use it?

  How the drive is formatted?  Is it encrypted?

• An error occurred when to partition the drive

  I have a MBP 2012 retina end 13 "El Capitan 10.11.6

  The hard drive in the machine is swapped with Transcend SSD of retinaTRIM is not enabled.

  I'm trying to install 10 Windows using Boot Camp, and I get this error.

  An error occurred when to partition the drive

  Your drive cannot be partitioned.

  I've tried-

  • reset the PRAM,
  • First aid running in the desktop utility and
  • running/sbin/fsck - AF in single user Mode.

  Nothing has worked.

  Any help is greatly appreciated.

  Maybe you have not enough contiguous free space to create the partition.

• How to eject the disc from the drive superdrive usb?

  How to eject the disc from the drive superdrive usb?

  -Drag / drop the icon for the CD in your trash

  -Restart the computer and after the buzzer, press in and hold the left mouse button until the disc ejects.

  -Press on the button of your keyboard.

  -Click the eject button in the menu bar.

  -Press on COMMAND-E.

  -Open the Terminal app in your Applications/Utilities folder. copy and paste the following text:

  / usr/bin/drutil eject of

• I want to connect my Macbook Air (IOS 10.9.5) with my amp stereo House (TEAC I-501DA), which has a USB connection. I followed the steps described in the manual TEAC to install the driver and my Mac says it is installed correctly, but it does not appear I

  I want to connect my Macbook Air (IOS X 10.9.5) with my amp stereo House (TEAC I-501DA), which has a USB connection. I followed the steps described in the manual TEAC to install the driver and my Mac says it is installed correctly, but it does not appear as an option in the preferences/system sounds.

  Version 1.1.2.2 El Capitan driver support, then why don't upgrade you your MacBook Air to El Capitan?

• my macbook pro (2010) hard drive stopped accepting a disc - eject just when put in the drive. There is no drive that is stored in the drive

  disc drive has stopped working on macbook pro 2010 - any ideas?

  Try SMC and NVRAM resets:

  https://support.Apple.com/en-us/HT201295

  https://support.Apple.com/en-us/HT204063

  If it is with all types of drives and media, the drive may have failed.  A genius bar for a FREE assessment appointment is a good option.

  Ciao.

• not recognize the drive flash 10.11.5

  ALL OF A SUDDEN DOES NOT RECOGNIZE MY FLASH DRIVES.

  ANY SUGGESTIONS?

  Hot there in Borego Springs?

  Launch/Utilities/Terminal and copy and paste this command at the command prompt:

  diskutil list

  Press return.

  If it sees the drive, note the number of the disk (left column) that you want to mount.

  Then enter this command:

  Mount /dev/ (number of disk)

  Put the number without parentheses.

  Press return.

  To disassemble the use umount.

• Can't erase hard drive MacBook Pro - "could not disassemble the drive.

  I lost my original install discs Mountain Lion. Spin a MacBook Pro (2011 model).

  I found some articles that show you how to remove & reinstall everything without use of the physical disks. It is to restart my MacBook, pressing command-R, will using this toerase my hard drive and disk utilities

  However, when I try to wipe my drive, this error message appears: "erase disc failed with the error: failed to unmount disk.»

  I have attached a picture of the error that is displayed.

  On the left side of the utility window of disc (see attachment), there where hard disks are displayed, it shows the drive of 500 GB Toshiba MK. Directly below is the option "Macintosh HD."

  This error ONLY appears when I try to erase the disc from Toshiba. But this allowed me to erase the hard drive Macintosh option. Why is this? My drive was nonetheless erased? Or I still have to do something else?

  Thanks in advance for any help on this matter.

  

  Please check this thread: Erase disc failed with the error: failed to unmount the drive. Mavericks running

• Erase the drive Flash Kingston

  When I go to the disc utilities and erase a kingston usb key, it shows the clear bar and then but does not erase.

  What Miss me?

  Hello BearArgyros7.

  Thank you for using communities Support from Apple. I understand that you are unable to format/erase your USB on your Mac mini. I am happy to give you advice with this.

  Some USB keys include the exclusive data security encryption. Check out site Web of Kington to see if yours is one of them:

  Readers of encryption of Kingston

  If yours is not of them, then try to format your USB key with a different format than what you tried. If successful then try to format at your choice of desire.

  Finally, try erase/format your drive to another computer. If the player fails to put it in another computer, then there is a chance that the drive has failed.

  Best regards.