not recognize the drive flash 10.11.5

Similar Questions

• Win 7 Backup and Restore does not recognize the USB flash drives.

  Win 7 Backup and Restore does not recognize the USB flash drives for a backup image or a recovery disc.  Given that Windows 7 Starter Edition is used in many, if not most of the netbooks and netbooks have no optical drive, support for flash (thumb) drives would be very handy, especially for repair and recovery.

  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  You can't save backups to a flash drive, you need an external USB hard drive.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• I have a My Passport to the top by car and I get error messages on this to be ejected (although it was still connected). Now my computer does not recognize the drive. All solutions?

  I have a My Passport to the top by car and I get error messages on this to be ejected (although it was still connected). Now my computer does not recognize the drive. All solutions?

  Drive, interface in the crankcase of training controller, or the USB port or the cable may be faulty.

• Compaq presario cq57-339WM does not recognize the drive as a bootable disk recovery

  Compaq presario cq57-339WM does not recognize the drive as a boot drive recovery, I'm sorry people, I searched and I entered the job in New York as a matter of research. Operating system is 7 Home premium. Hard drive went bad, so I rplaced with new. I have had I have windows image backup, but the wizard could not find the hard drive. I ordered the HP poped the first of the two recovery disks, but the machine does not recognize the drive as a bootable disk recovery. I did factory retrieve records a large number of times on computers with different operating systems and have never seen this. TNA

  Randy Rich

  I found this on PC world. I downloaded everything I need, I hope. I tried not to build the disk again. I need some rest and sleep. Stay tuned for more develonents. Here is the link http://www.pcworld.com/article/2364269/how-to-reinstall-windows-like-a-pro.html?page=2

• CD/DVD does not recognize the drive.

  CD/DVD does not recognize the drive.  Error message-"Insert a disk." "" "Insert a disk in the drive (E or F, depending on whether one in use).  I bought a DVD/CD thought exteranl today that might work.  Same error message with the external dvd/cd.  Can hear the disc turning when it is inserted during a short period of time, maybe 20 seconds, then it stops.  Sometimes, the disc is ejected when the error message appears, sometimes not.  Same results even with blank CDs.

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• HP G60-235DX notebook pc does not recognize the drive d (cd - dvd drive)

  I'm reading a music cd in d drive.  My computer does not recognize the drive.  I can solve this problem?

  Press the Windows Logo key and the R key to open the run.

  Type;  regedit, and then click OK

  Navigate to:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  With the right button of the upper filters button, if necessary, and then click 'remove '. Click on the Yes"" button.

  Click the lower filters key, if present and click 'delete '. Click on the Yes"" button.

  Try again your CD.

• IS does not recognize the drive HARD internal

  I have three, all from a school lab, that have been linked with other positive points and printers.

  They are connected are not together anymore.

  All three have a floppy drive and a HARD drive. Will only boot from the HARD drive.

  At startup, the other two do not recognize their HARD drive and I use ea disk with the system in this regard.

  Since hard drives are not 'seen' I am unable to do anything with them: fix, set up as a boot drive, etc.

  They begin with the usual chimes and the Mac with the question mark, I slip the disk in and they complete commissioning.

  The internal drive spin up and the indicator light flashes.

  They do not show the drive HARD internal on the screen, but will show an external.

  I haven't started to swap parts between the good and the other two.

  Does anyone have an idea on how to activate an invisible HARD drive?

  You will need to use the boot floppy disks to start the machines to run the repair disk, partition and format the HARD drive if it is still functional. Only then can you install Mac OS on the HARD drive. That's all that I remember.

• Satellite Pro A10 does not recognize the drive WEIRD AD - 7540A model

  Hi all.

  I just bought a new model slimline DVD rewritable AD - 7540A, brand Sony NEC Optiarc. When it is plugged into the computer laptop and for the POST, it appears the 'IDE #1 error' message after the operating system starts, I am unable to open the drawer and no CD/DVD can be read.

  I checked this drive on another laptop from another brand, and it works fine, so the problem is not in the drive itself. Could someone help me?

  Thanks in advance.

  The problem is simple.
  Your phone does support not all readers of CD/DVD slimline because different or bad master/slave/c-salt settings.

  The IDE #1 error message indicates that the BIOS cannot recognize the device connected to the #1 IDE controller.

  In your case, the solution is simple; you need to buy a compatible CD/DVD player and supported

  Mayen a user manual would provide details on the management of records.
  If not, then contact the ASP in your country and ask some compatible devices!

  At soon buddy

• Y410P does not recognize the drive HARD and "Bad sector found" errors

  Hello, having problems with my son's laptop. He has recently updated to Win10 and after a day, the computer would not boot and did not recognize the existence of an operating system. I was able to create a bootable USB 8.1 and the operating system is now operational. However, there is no reconition of the HARD drive only SDS. The BIOS shows as available but who runs the Lenovo's Diagnostics tool (results below) translates into bad sector errors. Is there a way to recognize/recover the drive or do I need to replace? Thanks in advance. Cheers, Dave

  Flytact wrote:
  Thank you for the interpretation. Is there something specific that allows me to know that the ST1000LM024 of HARD drive is defective? I guess that I'lll need something to get a claim under warranty. Thanks again.

  The last part of your post (smart test) says that it is defective. To confirm this further you can try to physically remove the hard drive and connect it to another computer as an external drive or a secondary drive for further tests using the manufacturer's diagnostic program. BTW, Seagate is the manufacturer of the disk hard so that you can go to their site and download their program.

• Windows Vista does not recognize the drive c does not appear in 'my computer '.

  When I try to use the c drive, it turns only. 'My computer' does not show the c drive, but did before. How can I get Windows to recognize the drive again?

  Hello

  Try the microsoft 'fix - it' for your problem below

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  and read this information too

  http://support.Microsoft.com/kb/982116/en-us

• Computer does not recognize the driver for HL-DT-STDVDRRWGSA-H2OL ATA Device

  original title: HL-DT-STDVDRRWGSA-H2OL ATA Device

  its as it disappeared from my machine. the computer will recognize the pilot but but the drive does not appear when I go to computer file. If you insert a cd in the drive, it runs but can not read the cd/dvd.

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• Philips +/-RW DVD8631 will not recognize the drive

  Hello
  My computer specs are:
  Dell Dimension 8300. Multiprocessor PC ACPI. Intel Pentium 4 CPU 3.20 GHz 2 x Radeon X 300 series. ATA Storage Controller - 266F, Intel 82801FR SATA AHCI Controller, Intel 82801FB/FBM.

  My problem is that I filled my disk space and would like to burn files to CD - R or DVD-R for free space. I select the files I want to burn and ' move to ' the drive can burn data (Philips +/-RW DVD 8631). When I click on "Write these files to CD" it opens the Assistant when you type the name of the disk. I type the name and click "next". Then, I get a message that tells me that there is no disc in the drive. I used the software 'Identifier of DVD' which was recommended on the forums before, and it does not recognize the disc in the drive. I use DVD + R 8 x produced by "imation".

  If there is someone who can help, I'd be very happy. Thanks in advance to those that do.

  Thank you
  Ryujin

  Message edited by Ryujin9891 on 10/03/2008 19:35
  
  

• I have an old version of Illustrator (9) and I can't install it on my computer.  The computer does not recognize the drive.  Is there a way to get around this?

  I'm trying to install Illustrator 9 on my PC and the computer will not recognize the disc.  Is there a solution to this?

  You could look to see if there is a download link in the links of kglad in answer 1 # here https://forums.adobe.com/thread/1930162

• Windows does not recognize the USB flash drive

  Hello
  My USB does not work when I plug. It seems that Windows recognizes the device because it is found in the Solution Explorer window, but if I want to create a folder or a file on the USB key I have the following message:
  "Cannot find this article.
  It is no longer in < %3="" null :="" optext=""> . Check the location of the components and try again. " < br=""> also the files that are copied to the USB flash drive are not visible in Explorer and it looks like the drive is empty.

  I want to emphasize that the same (Kingston) USB flash drive works perfectly under Windows XP operating system on another computer so it may not be a problem with the device. The same problem also appears when you use a different USB (another manufacturer).

  Thank you!

  Hey, 101 a.

  , I just posted a fix I found for my USB flash/go to work again.  It was a very simple solution, too.

  I unplugged all USB devices first, then tried my USB jump drive again.  IT WORKED! I've narrowed the problem to the new printer that I use.  It's a Mono Dell Laser MFP 1125.  Whenever it is plugged into a USB port, my USB doesn't work.  All other devices work, but not the USB is the printer is connected

  I don't know what done to block the flash/USB key, but unplug printer allows the jump command to work again.  I will contact Dell on what did the printer driver to block the flash player.  Just an info on the fix I found.

• A220-1 satellite has 9 does not recognize the USB Flash drive 4 GB

  Hello

  I bought a new USB (attachment 4 GB) Flash drive.
  And I had a problem installing it.
  The same drive Flash was wel work with my friends laptop that has windows XP only.

  Someone of you can give me a solution for this problem.

  Concerning

  François kervevan

  Go to the nursery of the device and remove all USB Device Manager USB controllers and root hubs ports!
  Restart the laptop and after the new installation of USB port try to connect the USB 4 GB drive again.

  Good luck

  By the way; If you use Vista on your laptop, please update the last State and also install this patch:
  http://support.Microsoft.com/kb/941600/en-us

  Good bye