Erase the drive Flash Kingston

Similar Questions

• not recognize the drive flash 10.11.5

  ALL OF A SUDDEN DOES NOT RECOGNIZE MY FLASH DRIVES.

  ANY SUGGESTIONS?

  Hot there in Borego Springs?

  Launch/Utilities/Terminal and copy and paste this command at the command prompt:

  diskutil list

  Press return.

  If it sees the drive, note the number of the disk (left column) that you want to mount.

  Then enter this command:

  Mount /dev/ (number of disk)

  Put the number without parentheses.

  Press return.

  To disassemble the use umount.

• Erase the drive to the computer store

  Hi guys,.

  I send you my iMac to fix a screen. I don't want the possibility of the it Department at my personal information. I decided that the best way is to make a Time Machine backup, and then put in shape or erase my HD.

  Can I be sure I have a Time Machine backup all my files backed up to 100%? For example, mail sent, received e-mails, Photos on Aperture and so on... There are a lot of hidden files, who knows where.

  I would like to reinstall my Mavericks when I get my iMac back and hope that everything will be there Time machine.

  Any tips or ideas?

  Thank you!

  I'm not a big fan of Time Machine, then I would say you clone the drive to an external drive.

  Clone of Yosemite, Mavericks, Lion/Mountain Lion, using utility restore disk Option

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until the menu screen appears. Otherwise, restart the computer and after the buzzer, press on and hold down the OPTION key until the Boot Manager screen. Select the Recovery HD and click on the arrow pointing down.

  1. Select utility disk in the main menu then press on continue

  button.

  2. Select the destination volume in the list on the left.

  3. click on the tab restore in the main window of THE.

  4. Select the destination volume in the left list and then drag

  for the input of Destination field.

  5. Select the volume of the source of the list on the left and drag it to

  the Source field.

  6. check understood you, and then click Restore.

  Destination means that the external backup drive. Source means that the boot disk internal.

  
  

  
  

• I'm having a problem with the color of the text on the drive flash on Chrome

  The color of the text seems to be only on main lines and the rest is white, only started a few weeks ago and only on Chrome.

  I reinstalled and it is restarted during this time, I disabled the acceleration hardware and erased all the cache and data navigation, but still I can not read anything.  I added a screenshot of adobe help page, the writing is supposed to be red.

  

  Please help makes me crazy!

  Thank you

  Could you try to revert to the version PPAPI of the plugin to see if that helps (reverse the steps in the FAQ below)?  What we have learned, that effects only the NPAPI and version PPAPI should display the fonts correctly.

  Activate the system Flash Player in Google Chrome | Windows | Mac

  We are working with Google to solve this problem as soon as possible.

  Thank you

  Chris

• How can I erase the drive hard so that I can sell my HP Pavillion/Windows XP/3 GB ram/512 MB hard drive?

  I need help wiping my hard drive, so I can sell my computer

  Hello

  You can use the process below to completely erase your hard drive, but you must have your game that recovery disks to reinstall the operating system if you want to sell it with XP installed.

  Download and install Killdisk on the link below - (this application will write zeros to the entire disk).

  http://software.lsoft.net/KillDiskSuiteFree-Setup.exe of

  Download and install ImgBurn on the link below.

  http://download.CNET.com/ImgBurn/3000-2646_4-10847481.html

  Access the application of disc kill you have installed in all programs, open the main folder, then select Bootable Disk creators, then the BACK Bootable CD Creator that will burn the ISO on a blank CD bootable.

  During the following process do not worry about all warnings as your recovery DVDs will reformat the HARD drive.

  Insert this CD into yout laptop. Close Notepad, and then start again to boot from the CD of Killdisk and follow the instructions on the screen to kill disk.

  A brief description of the process here is Killdisk.

  Use it to wipe the entire hard drive, Select (80 h) and press f10 (you will also need to type a confirmation and press enter) - ( This will make sure to include all of the partitions , and then start the process - this may take a few hours!).

  When the process is complete, remove the CD of Killdisk, insert your first HP recovery disc and restart the computer to start the installation.

  Kind regards

  DP - K

• Erase the drive before returning the laptop

  Hello

  I have a recovery partition on the hard drive of my new R61, and I need to erase my data of it. How can I do this without also clearing my restore partition?

  I need to do this because I'm back my laptop under warranty and that everything must be in perfect condition. So, if I lose my recovery parition they won't take my laptop.

  Anyone? Please tell someone knows how this point?

  / Eric

  
  

• I've lost the ability to read or write on my DVD. The properties in my computer indicate that drive d: is full, but when I try to copy to the Cd, I get the message "load a blank disc in the drive of.» I tried to erase the drive D; the image, but to no ava

  Drive d image cannot be erased.

  Drive d image cannot be erased.

  ==================================
  The following article might be worth a visit, but
  I guess that you have a hardware problem
  with the DVD player.

  (314060) your CD or DVD drive is missing
  or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/314060/en-us John Inzer - MS - MVP - digital media experience

• How can I erase the drive hard when I can't read the screen of the monitor?

  I need to wipe the hard drive and reinstall windows xp but I can not "cmd" promp because I can't read the monitor

  What do you mean that you can not read the monitor? Is the black screen or it seems weird when you start the operating system? And why do you need command prompt to reinstall an operating system?

  You need not be inside an operating system to reinstall.

  1. Insert the installation disc and turn on your computer
  2 watch it down or up for orders of F access the BIOS (usually F2) or the Startup Manager (usually F12)
  3 power on the system again, then press the button once Startup Manager as a couple at the time wherever you turn on the computer.
  4. Select the CD/DVD drive as the boot device
  5. a screen will come in saying to press a key to boot from CD (so press a key) and the installation will begin.

  If you don't have a Boot Manager, then you must start in the BIOS or Setup and move the CD/DVD drive up to make the first boot device.

• Where is the drive flash is transferred to distribution files?

  With the imminent closing of the distribution of Flash player site, I recorded to distribute FlashPlayer and have yet to receive a link to the new download site.  Can someone point me to the appropriate channel to access the new site?

  Thank you very much

  Hello

  I followed with the team managing this change.  When did you apply for a license?  The email he should have received very shortly after the application.  Is it possible that the email is charged is stuck because of the spam filter?

  --

  Maria

• Envy 17 j120na: 10 Windows will not start because of the driver installation failed

  History:

  I have a computer laptop j120na Envy 17 that came with windows 8.1.

  I did the free upgride for windows 10 the 18th of this month with success, but because I was not able to decrease or increase the brightness of my computer, or put it to sleep, I realized that I still had to download/update drivers. First I updated the driver GeForce since my SWsetup folder but for the other, I searched online for her, then I saw the driver download progress bar but no progress has been made. I closed the dialog close and there you go, laptop does not start, I just saw a spark between the mouse pointer and the circular blue contraption. Sometimes he shows me a BSOD with lock core auto boost with irql higher acquisition.

  Question:

  Is this a problem with the driver installation? And if so, how do I return it?

  P.s: System Restore is not an option, I restore point.

  Hi there @Aj1baba,

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and assistance of HP and the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that you are receiving an error message that says "acquisition of lock core auto boost with irql high ' on your HP ENVY 17-j120na Notebook PC.

  The question could be deemed to occur by downloading the update. It is difficult to say at this stage. As to return to it, your best bet would have been the restoration of the system, but you mentioned only that a system restore does not work because you do not have restore points.

  Have you tried to go into Safe Mode?

  You have media or recovery disk?

  Have you tried to do a Reset BIOS?

  Have you tried perform a hard reset?

  You have beep codes or flashing LEDs?

  Please ensure that all Bluetooth device that you use with the laptop is disabled (including mobile phone).

  Please note: delete all USB/Bluetooth devices. Disconnect all devices of non-essential, as these can cause some problems.

  You can update all your drivers by going to the Web site the driver HP or by using the HP Support Assistant. If you enter Safe Mode, I suggest trying to erase the driver that you have downloaded your downloads (or the folder that you saved it in), so I suggest to make updates using updates of Windows or HP Support Assistant for now.

  Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of the resolution of the problems.

  Have a great day!

• Windows does not recognize the USB flash drive

  Hello
  My USB does not work when I plug. It seems that Windows recognizes the device because it is found in the Solution Explorer window, but if I want to create a folder or a file on the USB key I have the following message:
  "Cannot find this article.
  It is no longer in < %3="" null :="" optext=""> . Check the location of the components and try again. " < br=""> also the files that are copied to the USB flash drive are not visible in Explorer and it looks like the drive is empty.

  I want to emphasize that the same (Kingston) USB flash drive works perfectly under Windows XP operating system on another computer so it may not be a problem with the device. The same problem also appears when you use a different USB (another manufacturer).

  Thank you!

  Hey, 101 a.

  , I just posted a fix I found for my USB flash/go to work again.  It was a very simple solution, too.

  I unplugged all USB devices first, then tried my USB jump drive again.  IT WORKED! I've narrowed the problem to the new printer that I use.  It's a Mono Dell Laser MFP 1125.  Whenever it is plugged into a USB port, my USB doesn't work.  All other devices work, but not the USB is the printer is connected

  I don't know what done to block the flash/USB key, but unplug printer allows the jump command to work again.  I will contact Dell on what did the printer driver to block the flash player.  Just an info on the fix I found.

• I lost memory to the usb flash drive space, help me please.

  I formatted 2 gb usb flash drive, and now he has 247 MB of available space.
  in computer SCIENCE, I chose flash drive (E), then right-click on it and choose FORMAT.

  Hello

  1. What is the number of brand and model of the flash player?

  I suggest you plug the flash drive on another computer running on Windows 7 and check if the problem persists.

  You can try to format the drive falash using MS DOS and cehck if that helps.

  (a) click on the start menu

  (b) prompt to type in the start search bar (run as administrator command prompt)

  (c) type "format [drive letter]:" at the command prompt, replace "[drive letter]" by the letter of the drive you want to format.

  (d) then press the Enter"" key. Note that the drive letter must be followed by a colon - for example: "format c:".

  (e) support on 'Y' If you are prompted to confirm if you want to erase everything on the hard drive. Confirm that you want to continue. MS-DOS will start to reformat your hard disk and all data

  on the disc is erased.

  If the problem occurs on another computer as well, then the issue may be with the flash drive corrupted, in this case, you can get in touch with the manufacturer for assistance.

• Vista backup cannot reuse the same flash drive

  How can I reuse my flash drive to another backup? Vista knows it has been used before, even if I deleted the old backup.
  thanx

  Hi Joy77,

  Is there anything else being stored on another flash drive backups? Otherwise, you might save a few headaches and just format your drive.

  Warning

  • Formatting a volume will destroy all data on the partition. Be sure to make backups of all the data to save before you begin.

  • You cannot format a disk or partition that is currently in use, including the partition that contains Windows.

  • Quick format is a formatting option that creates a new file table, but do not completely overwrite or erase the volume. A quick format is much faster than a normal format, which fully erases the existing data on the volume.

  1. Open Computer Management by clicking on the button start , clicking Control Panel, clicking system and Maintenance, click Administrative Tools and then double-click computer management.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. In the Navigation pane, under storage, click Disk Management.

  3. Right-click the volume you want to format and then click on format.

  4. To format the volume with the default settings in the dialog box format, click OK, and then click OK again.

     For more information about the formatting of a partition, see create and format a hard disk partition.

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can't erase hard drive MacBook Pro - "could not disassemble the drive.

  I lost my original install discs Mountain Lion. Spin a MacBook Pro (2011 model).

  I found some articles that show you how to remove & reinstall everything without use of the physical disks. It is to restart my MacBook, pressing command-R, will using this toerase my hard drive and disk utilities

  However, when I try to wipe my drive, this error message appears: "erase disc failed with the error: failed to unmount disk.»

  I have attached a picture of the error that is displayed.

  On the left side of the utility window of disc (see attachment), there where hard disks are displayed, it shows the drive of 500 GB Toshiba MK. Directly below is the option "Macintosh HD."

  This error ONLY appears when I try to erase the disc from Toshiba. But this allowed me to erase the hard drive Macintosh option. Why is this? My drive was nonetheless erased? Or I still have to do something else?

  Thanks in advance for any help on this matter.

  

  Please check this thread: Erase disc failed with the error: failed to unmount the drive. Mavericks running

• A220-1 satellite has 9 does not recognize the USB Flash drive 4 GB

  Hello

  I bought a new USB (attachment 4 GB) Flash drive.
  And I had a problem installing it.
  The same drive Flash was wel work with my friends laptop that has windows XP only.

  Someone of you can give me a solution for this problem.

  Concerning

  François kervevan

  Go to the nursery of the device and remove all USB Device Manager USB controllers and root hubs ports!
  Restart the laptop and after the new installation of USB port try to connect the USB 4 GB drive again.

  Good luck

  By the way; If you use Vista on your laptop, please update the last State and also install this patch:
  http://support.Microsoft.com/kb/941600/en-us

  Good bye