Reconnection problem PSE 5.0

Similar Questions

• Reconnection problem drivers Ethenet IP

  Hello

  I was reading OR documents/messages about drivers Ethenet IP and I was wondering if the reconnection problem has been resolved? I use cRIO no PC.

  Here's the number that is assigned to the https://decibel.ni.com/content/docs/DOC-4065
  "Hello OR EtherNet IP users and administrators,

  I'm having a problem, which can be related to a bug in the Labview Ethernet IP driver.

  I have a PLC Controllogix running an electro/pneumatic/mechanical workstation which has also a LabView on a PC application, a data acquisition high speed and analysis. The symptom I do experience, it is that if I'm online with PLC and actively follow up and/or edit the PLC, then the station program is running, the communication between the PLC and the Labview PC via ethernet IP appears to hang. This requires a full cold boot of the PC to restore communications. Simply put on the Labview application re-does not establish the connection.

  If I'm not in line with the PLC, while the station is running, the communication is not blocking, or at least the frequency of occurrence is significantly reduced.

  I saw that there is a newer version of ethernet driver IP available, was this created to solve a specific problem? If so would upgrading to the new driver to fix my problem? Thank you! "

  Hi sticyfinger,

  This thread, I think that it is not final, it has been caused by bugs.

  Have you met these erroneous behaviors?

  I haven't seen such a question in the database well. I think you should go to 14.0 given that other patches.

• AnyConnects reconnection problem.

  Hello community, I need more minds to this topic, makes me crazy! and I can't understand our reasons.

  95% of the users using AnyConnect have this same problem... you open anyconnect you can connect without problems, but always after 60 sec or if VPN is a small impasse and it reconnects, after that no zero problem, the computer never lost network connectivity, this behavior occurs same cable.

  What can I change to avoid this behavior?

  Thank you!!

  Rolando A. Valenzuela

  [29/04/2016 10:17:43] Contacting ACME.
  [29/04/2016 10:17:44] Evaluation of posture: required for access
  [29/04/2016 10:17:45] Evaluation of posture: Verification of updates...
  [29/04/2016 10:17:45] Evaluation of posture: opening...
  [29/04/2016 10:17:48] Evaluation of posture: assets
  [29/04/2016 10:17:48] Evaluation of posture: opening...
  [29/04/2016 10:17:48] Please enter your username and password.
  [29/04/2016 10:18] User credentials entered.
  [29/04/2016 10:18:04] Establish the VPN session...
  [29/04/2016 10:18:04] Checking for updates to profile...
  [29/04/2016 10:18:04] Checking for updates...
  [29/04/2016 10:18:04] Checking for updates of customization...
  [29/04/2016 10:18:04] Execution of required updates...
  [29/04/2016 10:18:04] Establish the VPN session...
  [29/04/2016 10:18:04] Setting up VPN - initiate the connection...
  [29/04/2016 10:18:04] Setting up VPN - examining the system...
  [29/04/2016 10:18:04] Setting up VPN - activation card VPN...
  [29/04/2016 10:18:07] Setting up VPN - configuration system...
  [29/04/2016 10:18:07] Establish a VPN...
  [29/04/2016 10:18:07] Connected to ACME.
  [29/04/2016 10:19:10] Reconnection to ACME...
  [29/04/2016 10:19:10] Setting up VPN - examining the system...
  [29/04/2016 10:19:16] Setting up VPN - activation card VPN...
  [29/04/2016 10:19:16] Setting up VPN - configuration system...
  [29/04/2016 10:19:17] Establish a VPN...
  [29/04/2016 10:19:17] Connected to the ACME

  Hello Rolando,

  Take a look at this:

  http://www.Cisco.com/c/en/us/support/docs/security/AnyConnect-secure-mob...

  You can run the described behavior and the document provides possible solutions.

  Miguel

• GIF/save for Web problem (PSE 7)

  I tried searching for an answer to this problem, but nothing seems to fix everything that happens.

  Recently, I had to replace my laptop and from Windows XP to Windows 7.  I transferred the PSE 7 from the old system to the new system and have had no problems with it - until now.  I have an image in format Photoshop 52 - layer I want to save as an animated .gif, with each layer as a different image.  File > > Save As has the ability to save layers as frames, but if I check it, then click on 'Save', nothing happens.  Nothing at all.  On my old system, I would get a new dialogue with options like the quality, duration by frame, loop, etc., but that doesn't happen any more, and there is nothing to save (if I'm going to find the new .gif file, it's just not there). If I do not choose "Layers in images", dialogue .gif does so very well and it has no difficulty to save it as a static .gif file.  But it seems that she won't just save it in animated format.

  I'm having the same problem with "save for Web".  Or the option of the file menu or typing command will bring up dialogue to let me record this way.  He thinks maybe a second, but does nothing else and does not record the image.

  I tried to reset the layout, just in case the dialog box has been moved somewhere that I wasn't just to see and I tried to reset the preferences to save it for the Web, but none of these things worked.  No explanation as to why a .gif animation 'layers as images"is the only format that is not saving correctly?

  I also tried old connections animated that I created with XP, and they will not re - save as animation connections either opening.  I get her "do you want to save changes" dialogue, but clicking on 'Yes' does nothing and does not record updates.  I am at a total loss for why this feature no longer works.

  If you right click on the shortcut of items and choose Run as administrator,

  It does make a difference or not save for Web work?

  Registration of the Web dialogue box is the same dialog box that you would get when checking the layers as frames

  in the Save as dialog box.

  MTSTUNER

• installation problems - PSE 8 on windows 7

  I try to install PSE 8 on a toshiba satellite. Vista has been installed originally, but the laptop has been upgraded to windows 7.

  installation seems to go smoothly through the file copy process, with the bar to achieve nearly 100% - so, a 'dismantling' starting state.  No warning, no error message.  Once the restoration is complete, I get a message that the installation has been interrupted, and I have to restart it later.

  I tried the installation in xp sp2 mode and running as an administrator.  exact same results.

  any thoughts?

  Delete the cache.db that can be found in the location below and then try again to install:

  %ProgramFiles%\CommonFiles\Adobe\Adobe PCD\cache.db

  NOTE: Do this step may require you to re-enter the serial number for Adobe products already enabled on your machine.

  If this does not work, try the steps mentioned in the link which provided John.

  Kind regards

  Ankush

• Files already exist when reconnecting probably missing files

  I'm fighting to clean up hundreds of files in my database of the PSE Organizer.

  Whenever I launch reconnect it all the command (or any other command that requires a reconnection first), PSE locates a large group of likely the missing files. Dialogue to "Reconnect missing files" of the PSE shows me the former location of the files. I navigate to this place and find files always there. I then select the file and press on reconnect. Unfortunately, then I get an error that says: "the file already exists in the catalog. This clears the problem of file missing for the moment. However, when I run another missing file check, he'll still find these same files. I tried to plug back them several times but PSE continues to tell me that they must be reconnected but still know where the files are located.

  I have already run a database repair (no not found errors).

  I also ran an optimization of database without problem.

  Some system information:

  • Win7 Home Premium Service Pack 1
  • Dell XPS computer i7
  • 6 GB of RAM. > 350 GB of free space on hard drive
  • PSE 12... but also had the same problem on PES 11. I've updated hoping that the problem would be solved. It wasn't.

  Thanks for any help to eliminate this problem for me.

  -Bruce

  I solved my problem... even if I don't know what caused it or why Adobe program didn't fix for me.

  The "missing" entries that have been highlighted were all the duplicate entries. Adobe will not allow a duplicate in the same physical file entry. I deleted all of the offending entries and it cleared my problem. I hope this solution helps others.

  -Bruce

• Intermittent hard drive looking for the light. White screen.

  My Pavillion Office refused to start today with light orange hard drive "will not blink" in the quick flicker even way while trying to start.  Its flashing for a longer period with a consistent pace of about one and a half seconds per blink.

  I removed the hard drive from the system one enslaved in another Pavilion and it worked fine, I reinstalled the memory of the original machine and reconnected problem persisted.

  I would appreciate any recommendations on the resolution of this grace.

  Thanks for the reply, but I solved this problem. A memmory in the system module has been damaged possible overload of dllhost.exe. I I removed the module and the system now boots normally.

• Solved: LAN T500 connection constantly sinks

  Hello.

  I just bought a (used) T500 and installed Win7 (64 bit). It works great so far, except that it has some problems with our network at work. I already talked to our it guy, and he assured me, that my settings (IP address, Server DNS etc.) are all correct.

  The connection is not the real problem, this is the outfit of the connection. At irregular intervals (at the beginning, often after a few seconds or a few minutes later it lasts longer) the connection just drops. It is restored directly afterwards, as seen easily in the center of the network. But it takes some time, and this constant fall-restore-fall is a bit annoying, especially if you want to keep a permanent connection to a different workstation.

  WiFi instead of my parents and wide broadband (DSL) home work very well. I also tried to connect my laptop to various points of access to work, using different network cables, but no difference. In all cases, the laptop was powered by AC and the plan "a power optimal power source" chosen.

  Of course the latest drivers via Windows and the Lenovo system update are installed. There is no error message in Device Manager, or the ThinkVantage Productivity Center.

  So far, only two options come to mind:
  (a) it is a hardware error (e.g. loose contact) in the NIC (Intel 85267LM Gigabit), which means that I have to send the laptop for Lenovo. I still have the guarantee, but it might take some time until what I'll be back. But then, should not the connection broadband affected as well? At least the cables are connected to the same port.
  (b) it is a kind of software error. Maybe, I just forgot to check or uncheck a characteristic of Win7 (ours IT has not yet acquired so much experience with Win7). I already uninstalled "Access Connections" because I heard that in some cases (especially Wifi) it can collide with the standard windows programs. Once again with no results.

  So, if anyone here has a good idea (or need additional information) do not hesitate to say.

  Volker

  Hey Andy, sys3175.

  Thanks for your suggestions, but I just finally found the solution.

  In its obviousness, I dare hardly to admit it, but the perpetrator was founded the ethernet hub, I had to use due to the fact that our local network is always BNC and I have no card adapter for my laptop. For me there is to say that at the beginning I knew, too, but then ruled, because

  (a) my desktop pc worked fine with it, in a trial (although a test quite short at the beginning), and

  (b) I have connected my laptop to hub my colleague, who use it for more than a year (but with his pc) and still had the drop reconnection problem.

  So I assumed a problem with my laptop. But apparently

  (a) our desktop pc seems to be more tolerant on the quality of the connection as my laptop. Because when I have connected my pc and my laptop to my hub, and this time has worked with them all day, leaving the download of large amounts of data (> 1 GB), the pc indeed received "network cable unplugged" messages, but only two or three times, while the laptop has repeatedly its abandonment. And

  (b) hub my colleague seems to have the same problem as mine, because today I had the opportunity to connect my laptop to two other, different regional centers here at work and voila, stable connection.

  So the good news is, that, probably, everything is fine with my network card, the bad news, I have to get a new hub (not the easiest thing for the BNC and probably don't bother given the short remaining time here) or I have to live with the annoying dropouts.

  Sorry for the setting on the wrong path with the network card, but nevertheless thank you for your support.

• I have 6 autonomous Lightroom which was transfomed by a technician of Adobe support in LR - CC.

  I hope this is the right place to ask this kind of question, and my apologies if not.  I'm old, very good to use programs, but not a lot of good on the technical stuff.

  I have 6 autonomous Lightroom that has been transformed by a technician of Adobe support in LR - CC.  He spent two hours last night on Live Chat to solve a problem installing with PSE 14 in which technology had control of my system for about an hour +.

  While working to sort the problem PSE, I saw several relating to LRoomCC guests.  This interview with technician and repeatedly told him that I didn't have CC (I have the Live Chat transcript).  I have the standalone version of Lightroom6.  (This started me, 'OK, I noticed that the involved PSE14 the cloud installation somehow.  I the stand-alone versions of PSE and Lightroom6 and do not want to use versions of cloud still"Tech," has nothing to do with your computer or you won't pay anyhing for this... it's just that there some files than hleps to solve problems in some computers or scenario0s.

  There were then several constituencies (no) update LR - CC, but it seems that installed CC - "I would like to uninstall CC"; "let it first day"; "You won't be (losing independent LR6).  Well, I've lost (as well as my password manager application that was somehow cleared along the way).  OK, I used the CC, but that won't last long when it is noticed that I am not a Subscriber.

  It seems that Live Chat is currently unavailable, so any suggestions please as to what I could do now?  I just want LR6 autonomous return, preferably without having to reinstall in case I suffer similar problems as with the PSE 14 install.

  If it's relevant, I'm running 64-bit Win 7 Home Premium, SP1, full update the

  Intel (r) Core 17-2600 processor 3.40 GHz 3.80 GHz ©

  RAM: 8.00 GB

  SSD for programs; 2 internal hard drives (with lots of free space). BAK and storage of external hard drives.

  Thank you

  Phil.

  Hi, Jim,.

  With the help of the menu drop down it says "about Photoshop Lightroom CC.  The window that opens by clicking on that is directed LRCC.  The list also shows v.2015.3 Camera Raw 9.3.  At the opening, the program top left he said Lr Adobe Lightroom CC and in the develop module adjustment brushes include 'Dehaze '.  Also, the news I watch re data settings etc shows things that I've never seen elsewhere, for example 'Pattern' (I use LR since v2.0).

• element of Photoshop crashes when the text tool

  A week ago my Photoshop Elements began to break up when I select the text tool.

  Files that I've created in the past which contain text layers now open with a message "a problem reading layer 'text' [all the text was on the record] because of a program error." The existing pixel data will be there will substitute. Continue? »

  When I press 'Continue' and either select the text to try to change, or try and add text, it blocks the program which stops immediately, creating an accident report. I copied the accident report, but it's super long, so I don't know if it makes sense to paste it here.

  The same thing happens when I create new files and you want to add a text layer - it hangs and stops when I select the text tool. She makes my Photoshop Elements basically useless.

  I don't understand why this is happening - I did not download new fonts or anything like that and I don't do anything different than usual when you work on files. I run Photoshop elements 11 on Mac OS X 10.10.1

  Suggestions appreciated!

  Sometimes problems PSE to make it out no reason apparent and which are not fixed by the reset tool. In this case, it might be that the preferences file is corrupted.

  To restore this file in PES 11 and later versions: Edit > preferences > general and click on "Preferences of Reset on the next launch.

• Elements Organizer 11 reconnect file problem

  Learning of the 11 elements Organizer.  This problem is driving me crazy, however.  My live photos on C: > drive... This is where the catalogue also lives.  I have a second hard drive (D: >) installed on my computer and an external USB connection.  When I try to do things with a photo in the catalog (for example, rename), organizer starts trying to 'reconnect' the file on D: >.  This is not where they are.  I tried adding files and delete catalogs and my moving around image.

  Of course, I would appreciate any advice.

  LOW

  Hi wyatt7474,

  Please go through the below links, I hope this helps you.

  Photoshop elements (PSE) knowledge base.

  Reconnection of missing most of 11 courses Photoshop elements files: 01-import and organize Photos

  ~: Pierre Rousseau

• Hard, my time capsule airport is connected to my network. I also use it as my Wi - Fi. The time capsule disconnects from the network periodically and does not restore I have to restart to reconnect. What problem I have

  Hard, my time capsule airport is connected to my network. I also use it as my Wi - Fi and the backup. He constantly falls the internet connection and I have to restart the so he can reconnect. What problem I have?

  What brand and model of your Internet modem you have the Capsule Time (TC) by Ethernet? What exact model of the TC do you have? ... and who is your ISP?

• Reconnection to Bluetooth on Satellite C855-1WQ speakers problem

  Hello

  I had a few Cambridge Audio Minx speaker for Christmas. They connect using Bluetooth for my IPhone and my computer.

  However, I can't stay connected to my computer.
  When they connect first of all his plays perfectly fine.
  When I try to unplug the speakers, or turn them off, or by using the interface Bluetooth, sound is read, as expected, through my laptop speakers.

  The problem is when I try to reconnect the speakers by turning on.
  The module Bluetooth said there is a connection, but no sound speakers.
  Looking at the reading devices of the computer seems to be grateful that the speakers are connected, but there is still no sound.

  I can't get her back through the speakers by deleting the Bluetooth Stack for Windows device and forming a new connection each time.

  Is there an easier way?

  Thanks in advance.

  > Module Bluetooth said there is a connection, but no sound out of speakers.

  For me, it looks like the output of the playback of sounds has not been transformed to external speakers.
  Go to control panel of-> sound-> the Read tab, and then choose the external speakers as the default device.

• Having a problem of reconnection of the Disney movies to iTunes

  So, I received an email this afternoon who said apple was my movies Disney Anywhere disconnect my iTunes account because of the protection of personal information, and they do this every 2 years. They gave a link that took me to Disney anywhere to reconnect, but it has been impossible to repair. Everyone has a problem with that? I followed the instructions on the support page, but the page Web of Disney apparently didn't read instructions from Apple. None.

  I have tried for the last twenty minutes and I get one of the 2 errors. The first (and most common) are a white page. The second is that sometimes I get a popup that says click on 'continue' to open iTunes. When I click on continue, it opens a new tab and takes me to the Apple store to download iTunes. I tried with iTunes open and closed.

  Any ideas on how to fix? I'm really a bit confused that they were disconnected first, but now I can't get it reconnected, I get upset

  Thanks for any help!

  yekcal

  Same problem here. Why Apple makes it easy to take your money, but difficult to get anything done?

• My disconnecting the mouse and you reconnect to randomly but before I did not have this problem at all

  my mouse disconnect and reconnect at random

  but before, he can work as usual
  I think that it is the effect of a virus but I have scan my system and I have deleted some of them
  While this read my mouse continue to do
  I can't install the windows new cause I already do cause the effect of some viruses won't when I erase them

  Hi MOUWFFAK,

  ·         What is the brand and model of the mouse?

  ·         You get the error message?

  ·         What security software you use to remove the virus?

  Follow these methods.

  Method 1: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398 (applies to Microsoft Mouse only)

  Method 4: Update the latest drivers and software for the mouse.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658