Record a voice on a DV camera or the computer?

Similar Questions

• Question about re - install the software that came with the computer

  I inadvertently deleted the controller Ethernet and Bus High Definition Audio my laptop while trying to remove the Real Player I downloaded. How can I get these? What do I need to use the recovery disk that came with the computer or y at - it another way? If I use the recovery disk will I lose data and other software on the computer?

  Thank you.

  Hello

  If you are lucky man you will be able to use the tool to clean Windows system restore.
  This tool allow you to roll back the State of the OS to the point of beginning.
  I think you can use it and try to roll back the OS to the point where you have removed these applications.

• a lot of problems to connect my camera to the computer

  Hello. I use a USB cable to connect my camera to my computer. When I plugged the camera, windows said that a new found.and of material after only a few seconds, said that your new hardware is installed and ready to use.but at this time the windows reset without any windows alarm.when start-up and I tried to go to my user account, the computer is locked, and after a few minutes I reset. When windows started again and I tried to go to my user account, he says your files and folder lost and create a temporary account for me. After that when I plug in usb cable to my camera to the computer, it does not work and windows could not recognize my camera. I reconnected as administrator and delete my account and create a new. but the files of my older account which was on drive C are not accessible and that they don't remove it from the computer.  I have already installed microsoft security essential and it is up to date. my windows is XP sp3. Idon't think that my computer to the virus. Please help me .thank you.

  Hello

  I suggest you run restore the system to an earlier date when the camera was working properly.
  Here is an article on the hoe for this: http://support.microsoft.com/kb/306084
  Do you see any other matter with he performance of the computer?

• can't activate windows xp with the product key that came with the computer

  I got a computer of 510N HP Pavilion from a friend who was absolutely riddled with viruses and malware of all kinds.  Every thing I did to clarify apparently nowhere got done or made it worse.  At the end of the day, the computer would only begin to restart, stop after the start of the HP logo screen, then start to boot, etc and more.  All I could do was to install the hard drive in another computer and format, from scratch.  Now, I'm trying to install the system to XP op for the disc that came with the computer.
  the problem: the code the product key on the case went wrong with the disc.  After searching for solutions, I found a code on the disk by searching the files it contains, tried and it worked!  Problem is when I try to turn it on, it says it's an "unauthorized product key."  I tried to enter that code on the box and who says he is "invalid".  The Cd look authentic; are for distribution with new pc HP and Compaq.  After a further inspection drives are XP Professional SP2, while if it is XP Home Edition.  What gives?  Activation does not anyway. It is any use that will not make me buy a new set of disks?

  Please let me know if more info or detail is necessary.

  PS - only a single piece of hardware has been changed - the cdrom initially provided with the computer was bad, so I went out to perform the installation.

  When you perform a restore to the factory on some HPs condition you have two choices: 1) a restoration which keeps your data and programs (in a repair installation); (2) a full destructive restore which brings back the machine to the State, it's when you first opened the box. In your case, you have already wiped the drive, so the question is moot. I would call the HP technical support. Normally when you use an OEM recovery media (HP, Dell, etc.) a product key is never required during the restore. If you have used the media to restore HP shipped with your system and are always asked for a key and one on the sticker machine is not accepted, then something is certainly. MS - MVP - Elephant Boy computers - don't panic!

• Games that came on the computer... of Spider solitaire, etc.

  ... System operating Vista games that came on the computer with the program windows... these games jump, can't pick up cards to move, drop the cards before reached location.  What can I do to fix this problem because it made play very difficult and boring.

  After thinking about the answer of Mr. Smithers, I found the solution.  I have a USB mouse... so instead of buying a new mouse, I unplugged the mouse, plugged return it in and instant... change the jump and do not pick up improved maps.  Then I shut down the computer, unplug the mouse, rebotted the computer, plugged the mouse back after all was upward and ready to run on the computer... SUCESS!

  Thank you for the help... everything works as good as when it was new.

  Donna

• What woulld be the easiest way to record and save everything that is stored on the computer.

  I am a newbie and the computer is an hp with vista windoows. My question, what woulld be the easiest way to record and save everything that is stored on the computer. Thanks in advance

  I am a newbie and the computer is an hp with vista windoows. My question, what woulld be the easiest way to record and save everything that is stored on the computer. Thanks in advance

  You can read this article on the backup that I wrote: 'Return to top your computer regularly and reliable' to http://www.computorcompanion.com/LPMArticle.asp?ID=314

• Windows Vista on HP recovery, my current vista said that it isn't legal (it's that came with the computer)

  I intend to recover windows vista on my HP Pavilion DV4 - 1400. For some reason any my current vista said that it isn't legal (it's that came with the computer) I have not changed the operating system. My key of vista down my computer is damaged. If I perform my vista recovery provided with the recovery drive, this will solve the problem? The recovery process will be asking for a cd key, because as I said above that on my laptop is damaged.

  Hello

  with HP, you press F11 on startup to start the recovery process

  and it shouldn't have an entry of your share product key

  for any other questions about the process of recovering HP contact HP because it's their recovery process not microsofts

  Contact HP

  http://welcome.HP.com/country/us/en/contact_us.html

  HP support forums

  http://h30434.www3.HP.com/

• Download images from the camera to the computer

  My content box does not appear when I attach the camera to the computer.  The instructions say use the file on the toolbar in the photos section, however, I don't have the toolbar at all here and don't know how to get it.  Any help?

  My content box does not appear when I attach the camera to the computer.  The instructions say use the file on the toolbar in the photos section, however, I don't have the toolbar at all here and don't know how to get it.  Any help?

  =======================================
  If you connect the camera and the power you can
  to go to... Start / computer... and see the camera listed as a
  Removable disk. If_yes_left click on the drive and you can be
  possibility to see the directory and copy your photos from there.

  And... you may have a problem with your AutoPlay settings:

  Windows Vista-
  How to change the auto run settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  Windows Vista-
  Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  Windows Vista-
  AutoPlay: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• I just got a new Windows 7 computer. How I completely restart the entire computer and lose all files, applications, etc., that never came with the computer first?

  * Original title: restart the computer

  I just got a new Windows 7 computer, and it has many applications in this shift makes the apps that I really need. How can I completely restart the computer world and lose all files, applications, etc., that came with the computer first

  If these are apps you added and want more, you can use the functionality of your computer factory restore. Unfortunately, this erases the disk and leave you with a double précis of his State when you turned on for the first time.  Then, you would have to do all the updates of Windows and then install all the programs you want.

  Otherwise, use programs uninstaller (from Control Panel) for each application that you do NOT want to uninstall.

• Remove MS Office Starter came with the computer

  I have a HP p6837C, AMD Athlon II X 4 running under Windows 7 64-bit.

  I want to totally remove the MS Office Starter came with the computer and install a previous MS Office Professional, I had bought.

  How safely get rid of which came with the computer

  Hello

  Download and install the free version of Revo Uninstaller from the link below.

  http://www.revouninstaller.com/download-freeware-version.php

  Run revo and use it to uninstall the software.  Make a right click on the program icon you want to remove and select uninstall.  During the process, that you may be asked to remove the registry entries, simply select all and then click on remove.  Do the same for any left over files and folders.  Once the uninstall is complete, reboot the PC.

  Kind regards

  DP - K

• inserted my memory card in my camera and the computer corrupted all the photo files and video.

  lack of downloaded photos
  I inserted my memory card in my camera and the computer corrupted all the video and photo files.  How can I recover them?

  No guarantee... but the following freeware may be
  able to recover the files to your memory card.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Recuva - file recovery
  http://www.filehippo.com/download_recuva Introduction of Recuva (tutorials)
  http://www.Piriform.com/docs/Recuva/introducing-Recuva

• How can I activate my cam to the computer?

  my cam to the computer does not work for a few days now... whenever I click on the cam you... theres a warning: you have to turn on your cam or check the

  Plug...

  Hello

  Thanks for posting in the Microsoft Community forum.

  According to the description above, it seems that the webcam does not work on the computer.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. What is the brand and model of the computer?

  2. What is the full error message do you get?

  3 have there been recent changes to the computer before the show?

  I suggest to check the following links and make sure all options are properly set.

  Method 1: With the help of a webcam: http://windows.microsoft.com/en-US/windows7/using-webcam

  http://Windows.Microsoft.com/en-us/Windows7/seeing-is-believing-use-a-webcam-to-bring-your-Instant-Messaging-to-life

  Method 2: You can also run the hardware troubleshooter and check what the problem is and fix it accordingly.

  Follow the link below a convenience store opened.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  For all windows related issues please feel free to contact us or let us know and we will be happy to help you.

• Unable to connect Sony DSC-W650 camera to the computer

  original title: Sony DSC-W650 camera woes

  Anyone had problems connecting camera Sony DSC-W650 to pc via the USB with Windows 7 OS?  Very frustrating.  Beautiful pictures, just can't get off the bloody camera em.  Chat with rep online, no help to Sony since.  Downloaded software (since the plug & play does not work) without help.  Tried multiple USB ports with the same results.  Device Manager indicates I need to troubleshoot the device (appears on device like DSC-W650 Manager so it must be to see something), but zero.  Currently re-download software (PlayMemories) but I'm not going to hold my breath.  Help!

  Hello

  Thanks for posting the query on Microsoft Community and we are pleased to help you.

  The description of this request, it seems that you are having problems connecting camera Sony DSC-W650, prosecute the USB ports on the computer.

  I would like to gather more information on this problem:

  (1) that you get any notification on the screen after connecting the camera to the computer?
  (2) do you receive an error message after you connect the device camera to the computer?
  (3) don't you make changes to the computer before this problem?

  Perhaps, the hardware and devices troubleshooter can only solve the problem.

  You can track upward with the following methods:

  Method 1:

  Please see the link to open and run the hardware and peripheral troubleshooting tool on the computer:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  If the troubleshooter doesn't help, maybe, update the drivers for the USB can solve this problem.

  You can follow the link to update the drivers for hardware that does not work correctly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Please let us know if the problem still persists.

• How to turn on the camera on the computer hp compaq laptop

  How to turn on the camera on the computer hp compaq laptop

  Hi Antonijazg,

  
  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:
  http://support.Microsoft.com/common/international.aspx

• Transfer photos from the camera to the computer, but the camera is not detected on the computer

  Original title: want to help with the camera to the computer?
  I want to d/l my pictures from the camera to the computer but the computer does not recognize camera?

  Hello

  1. don't you make changes on the computer before the show?
  2. what happens when you connect the device to the computer?
  3. you receive an error message?
  4. What is the brand and model of the camera?
  5. How do you connect the camera to the computer?
  6. What is the status of the camera in Device Manager when you connect?
  7. have you installed the drivers for the camera on the computer?

  Check if the camera is detected in Device Manager.
  http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager

  Method 1:
  Run the fix it and check.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  
  Method 2:
  You can try the steps from the link to transfer images from the camera to the computer.
  How can I get pictures from my camera to my computer?
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-get-pictures-from-my-camera-to-my-computer
  Method 3:
  Try the link troubleshooting steps:
  Troubleshoot camera connection:
  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-camera-connection-problems

  Method 4:
  If you have any problem with USB connection then try the steps from the link:
  Tips for solving problems of USB devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Note: Apply as well to Windows 7.

  Reference links:
  Change the settings for importing pictures and videos
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-importing-pictures-and-videos

  Working with digital images
  http://Windows.Microsoft.com/en-us/Windows7/working-with-digital-pictures