a lot of problems to connect my camera to the computer

Similar Questions

• If I connect my camera to the computer wil it recharge the batteries of re-charable?

  I need the batteries in my camera charge re and can not find the charger, the re computer can load them?

  No, only cameras that comes with built in battery module are able to do. You can do that with out batteries from the shelf. In fact, when you have finished using your camera, you must always remove the battery to prevent them from being evacuated. Keeping batteries in cameras can also damage the camera.

• There is a program running in the background on my computer. It blocks my mouse and I can even hear a clatter, as when you connect a camera to your computer, or disconnect.

  I tried several times to get a solution to this problem.  There is a program running in the background on my computer.  It blocks my mouse and I can even hear a clatter, as when you connect a camera to your computer, or disconnect.  My computer has been analyzed by microsoft help and support was in my computer several times, and accomplished yet nothing worked.  Sometimes my mouse freezes every few seconds until it is maddening.

  original title: hopeless

  It seems that you have tried a number of bugs so far without success. Here are some suggestions of what I'm going to try:

  You mentioned a background current program, if it helps:

  Perform a clean boot to determine if background programs interfere with your game or program
   http://support.Microsoft.com/kb/331796

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
   http://support.Microsoft.com/kb/929135

  Don't forget to follow step 7: reset the computer to start as usual in the link above to return the computer to normal startup.

  I would also check the updates for your video card driver. Find the latest Windows Vista drivers for your specific computer model with the support site for your computer manufacturer. Be sure to get the right drivers for your specific version of Windows Vista, for example, 32-bit or 64-bit.

  If your mouse is a USB model, it can be useful to check the latest drivers for your motherboard (chipset) Vista to the support site for the manufacturer of the computer. Also, since you're here you can check for the other updated drivers for your system, i.e., audio, LAN (network), etc.

  Computer manufacturers
   http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  If you have the graphics card Intel integrated, you can check on the website below:

  Update utility graphics card Driver Intel
   http://www.Intel.com/p/en_US/support/detect/graphics

  If you have a dedicated graphics card, you will need to check with the card manufacturer, the two most often used are linked below:

  NVIDIA driver downloads
   http://www.nvidia.com/download/index.aspx?lang=en-us

  AMD (ATI) drivers & Software graphics card
   http://support.AMD.com/us/GPUDOWNLOAD/pages/index.aspx

  If you have not done so, see the support site of the manufacturer of the mouse for the Vista updated drivers, known issues with your specific models or known solutions.

  An element that may cause unpredictable problems that are extremely difficult to identify are (live RAM) memory errors, Windows Vista has a built-in for system RAM check utility:

  How will I know if my computer has a memory problem?
   http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-know-if-my-computer-has-a-memory-problem

  How to use the Windows Vista memory diagnostic tool
   http://www.bleepingcomputer.com/tutorials/using-Vista-Windows-Memory-Diagnostics-tool/

  To perform a more complete test is the use of Memtest86 but is more complex, includes the creation of a CD bootable for the test, it is not really something for difficult burn an .iso file downloaded to a blank disc (available in the free download link) and then boot from the CD.

  Memtest86
   http://www.Memtest86.com/

  I hope that something of the above can help lead you to a solution.

  Kind regards

• Unable to connect Sony DSC-W650 camera to the computer

  original title: Sony DSC-W650 camera woes

  Anyone had problems connecting camera Sony DSC-W650 to pc via the USB with Windows 7 OS?  Very frustrating.  Beautiful pictures, just can't get off the bloody camera em.  Chat with rep online, no help to Sony since.  Downloaded software (since the plug & play does not work) without help.  Tried multiple USB ports with the same results.  Device Manager indicates I need to troubleshoot the device (appears on device like DSC-W650 Manager so it must be to see something), but zero.  Currently re-download software (PlayMemories) but I'm not going to hold my breath.  Help!

  Hello

  Thanks for posting the query on Microsoft Community and we are pleased to help you.

  The description of this request, it seems that you are having problems connecting camera Sony DSC-W650, prosecute the USB ports on the computer.

  I would like to gather more information on this problem:

  (1) that you get any notification on the screen after connecting the camera to the computer?
  (2) do you receive an error message after you connect the device camera to the computer?
  (3) don't you make changes to the computer before this problem?

  Perhaps, the hardware and devices troubleshooter can only solve the problem.

  You can track upward with the following methods:

  Method 1:

  Please see the link to open and run the hardware and peripheral troubleshooting tool on the computer:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  If the troubleshooter doesn't help, maybe, update the drivers for the USB can solve this problem.

  You can follow the link to update the drivers for hardware that does not work correctly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Please let us know if the problem still persists.

• Im having problems to connect my helmet at the entrance in front of my laptop, and I can't use my microphone, which says that the "device" is not connected.

  Hi im having problems to connect my helmet at the entrance in front of my laptop, and I can't use my microphone, which says that the "device" is not connected. What should I do? Thank you

  Hello

   
  1. have you checked the problem by plugging the headset to another computer?
  2. it worked before?
  3. What are you talking about ""device"is not connected?
   
   
   
  I suggest you to connect to another computer and check.
  Also check if the device is compatible with Windows 7.
  Reference:
  Windows 7 Compatibility Center
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/
  If it's compatible, perform the methods below
  If it is not compatible, see the following articles:
   
   
   
   
  What is program compatibility?
  http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility
  
  Make older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
   
   
   
  Method 1: Run the audio Troubleshooter and see if it helps.
  Open the audio playback troubleshooting utility
  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter
   
   
   
  Method 2:
  Run the Fixit described in the article and perform the steps:
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
  See also:
   
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems
   
   
   
   
  I hope this helps.

• Download images from the camera to the computer

  My content box does not appear when I attach the camera to the computer.  The instructions say use the file on the toolbar in the photos section, however, I don't have the toolbar at all here and don't know how to get it.  Any help?

  My content box does not appear when I attach the camera to the computer.  The instructions say use the file on the toolbar in the photos section, however, I don't have the toolbar at all here and don't know how to get it.  Any help?

  =======================================
  If you connect the camera and the power you can
  to go to... Start / computer... and see the camera listed as a
  Removable disk. If_yes_left click on the drive and you can be
  possibility to see the directory and copy your photos from there.

  And... you may have a problem with your AutoPlay settings:

  Windows Vista-
  How to change the auto run settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  Windows Vista-
  Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  Windows Vista-
  AutoPlay: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Transfer photos from the camera to the computer, but the camera is not detected on the computer

  Original title: want to help with the camera to the computer?
  I want to d/l my pictures from the camera to the computer but the computer does not recognize camera?

  Hello

  1. don't you make changes on the computer before the show?
  2. what happens when you connect the device to the computer?
  3. you receive an error message?
  4. What is the brand and model of the camera?
  5. How do you connect the camera to the computer?
  6. What is the status of the camera in Device Manager when you connect?
  7. have you installed the drivers for the camera on the computer?

  Check if the camera is detected in Device Manager.
  http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager

  Method 1:
  Run the fix it and check.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  
  Method 2:
  You can try the steps from the link to transfer images from the camera to the computer.
  How can I get pictures from my camera to my computer?
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-get-pictures-from-my-camera-to-my-computer
  Method 3:
  Try the link troubleshooting steps:
  Troubleshoot camera connection:
  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-camera-connection-problems

  Method 4:
  If you have any problem with USB connection then try the steps from the link:
  Tips for solving problems of USB devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Note: Apply as well to Windows 7.

  Reference links:
  Change the settings for importing pictures and videos
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-importing-pictures-and-videos

  Working with digital images
  http://Windows.Microsoft.com/en-us/Windows7/working-with-digital-pictures

• looking for msn program to upload photos directly from my camera to the computer with Windows XP installed - advice?

  Have the Microsoft Office Picture Manager and love it, but don't see anywhere where it lets down or publish the photos of the actual device - advice or answers pls. Have used Picasa in the past but I only borrow this computer and find that they take too much space, see, they changed their formatting and makes it very difficult to take pictures off camera.

  Thanks for any help.

  H.E. Ingraham

  E-mail address is removed from the privacy *.

  I connect your device to the computer and then enter in my computer and see if you can see the camera, and then try to copy and paste the images of the camera in my images.

• WMP 11 says connect burner and restart the computer

  WMP 11 has just started this problem when I click on the tab burn I it tells me to connect burner and restart the computer

  Hello

  1. do you get an error message when you try to download files?
  2. you have any third-party burning software installed on your computer?
  3. do you have Internet Explorer 8 is installed on your computer?

  Follow the steps mentioned below and check if it solves the problem with Media Player:

  Method 1: Run automated troubleshooting who diagnose and fix problems with your CD or DVD drive when trying to read or burn media automatically.

  See Your CD or DVD drive cannot read or write media

  Method 2: If the problem is new, run system restore to restore the computer to a point before the problem started.

  Refer to this article for help:
  http://support.Microsoft.com/kb/306084

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• can't activate windows xp with the product key that came with the computer

  I got a computer of 510N HP Pavilion from a friend who was absolutely riddled with viruses and malware of all kinds.  Every thing I did to clarify apparently nowhere got done or made it worse.  At the end of the day, the computer would only begin to restart, stop after the start of the HP logo screen, then start to boot, etc and more.  All I could do was to install the hard drive in another computer and format, from scratch.  Now, I'm trying to install the system to XP op for the disc that came with the computer.
  the problem: the code the product key on the case went wrong with the disc.  After searching for solutions, I found a code on the disk by searching the files it contains, tried and it worked!  Problem is when I try to turn it on, it says it's an "unauthorized product key."  I tried to enter that code on the box and who says he is "invalid".  The Cd look authentic; are for distribution with new pc HP and Compaq.  After a further inspection drives are XP Professional SP2, while if it is XP Home Edition.  What gives?  Activation does not anyway. It is any use that will not make me buy a new set of disks?

  Please let me know if more info or detail is necessary.

  PS - only a single piece of hardware has been changed - the cdrom initially provided with the computer was bad, so I went out to perform the installation.

  When you perform a restore to the factory on some HPs condition you have two choices: 1) a restoration which keeps your data and programs (in a repair installation); (2) a full destructive restore which brings back the machine to the State, it's when you first opened the box. In your case, you have already wiped the drive, so the question is moot. I would call the HP technical support. Normally when you use an OEM recovery media (HP, Dell, etc.) a product key is never required during the restore. If you have used the media to restore HP shipped with your system and are always asked for a key and one on the sticker machine is not accepted, then something is certainly. MS - MVP - Elephant Boy computers - don't panic!

• Loss of internet connection after sleep and the computer will not be closed.

  I have a laptop GateWay w / Vista 32 bit OS.  Recently connected to the new internet connection and can connect without a problem.  However, after waking from sleep, the connection is lost, the icon indicates still active connection, can no longer open connection or the computer will restart.  It just hangs and I have to make a hard stop and start again.  If I remive the connection Wireless via safe mode things is back to normal.  However, the cycle repeats when the connection is restored and the computer enters mode "Eve".

  Hi bobert1953,

  This problem can occur when the power management profile turns off your network adapter.

  Method 1: To disable power management feature ent of network cards

  a. click on start

  b. right click on computer

  c. click on manage the

  d. click on Device Manager in the left pane of the window

  e. expand your network card.

  f. now you will see your network adapter or adapters if you have more than one. Right-click on the network component, and then click Properties.

  g. go to the power management tab.

  h. ensure that all check boxes are unchecked (check boxallow the computer to turn off this device to save power is off).

  i. When you have disabled the boxes, click ok and restart your system. Put the computer in mode 'sleep' and check if you still have any questions.

  Method 2: You're also talking about the steps mentioned in the article below, which deals with a similar question

  After you wake up, a Windows Vista-based computer or a Windows 7 sleep mode or Hibernate computer, the network icon and the speaker in the notification area icon do not show the correct state

  http://support.Microsoft.com/kb/937477

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Games that came on the computer... of Spider solitaire, etc.

  ... System operating Vista games that came on the computer with the program windows... these games jump, can't pick up cards to move, drop the cards before reached location.  What can I do to fix this problem because it made play very difficult and boring.

  After thinking about the answer of Mr. Smithers, I found the solution.  I have a USB mouse... so instead of buying a new mouse, I unplugged the mouse, plugged return it in and instant... change the jump and do not pick up improved maps.  Then I shut down the computer, unplug the mouse, rebotted the computer, plugged the mouse back after all was upward and ready to run on the computer... SUCESS!

  Thank you for the help... everything works as good as when it was new.

  Donna

• Windows Vista on HP recovery, my current vista said that it isn't legal (it's that came with the computer)

  I intend to recover windows vista on my HP Pavilion DV4 - 1400. For some reason any my current vista said that it isn't legal (it's that came with the computer) I have not changed the operating system. My key of vista down my computer is damaged. If I perform my vista recovery provided with the recovery drive, this will solve the problem? The recovery process will be asking for a cd key, because as I said above that on my laptop is damaged.

  Hello

  with HP, you press F11 on startup to start the recovery process

  and it shouldn't have an entry of your share product key

  for any other questions about the process of recovering HP contact HP because it's their recovery process not microsofts

  Contact HP

  http://welcome.HP.com/country/us/en/contact_us.html

  HP support forums

  http://h30434.www3.HP.com/

• How can I activate my cam to the computer?

  my cam to the computer does not work for a few days now... whenever I click on the cam you... theres a warning: you have to turn on your cam or check the

  Plug...

  Hello

  Thanks for posting in the Microsoft Community forum.

  According to the description above, it seems that the webcam does not work on the computer.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. What is the brand and model of the computer?

  2. What is the full error message do you get?

  3 have there been recent changes to the computer before the show?

  I suggest to check the following links and make sure all options are properly set.

  Method 1: With the help of a webcam: http://windows.microsoft.com/en-US/windows7/using-webcam

  http://Windows.Microsoft.com/en-us/Windows7/seeing-is-believing-use-a-webcam-to-bring-your-Instant-Messaging-to-life

  Method 2: You can also run the hardware troubleshooter and check what the problem is and fix it accordingly.

  Follow the link below a convenience store opened.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  For all windows related issues please feel free to contact us or let us know and we will be happy to help you.

• Question about re - install the software that came with the computer

  I inadvertently deleted the controller Ethernet and Bus High Definition Audio my laptop while trying to remove the Real Player I downloaded. How can I get these? What do I need to use the recovery disk that came with the computer or y at - it another way? If I use the recovery disk will I lose data and other software on the computer?

  Thank you.

  Hello

  If you are lucky man you will be able to use the tool to clean Windows system restore.
  This tool allow you to roll back the State of the OS to the point of beginning.
  I think you can use it and try to roll back the OS to the point where you have removed these applications.