record directly to computer

Similar Questions

• Is it possible to record directly into iMovie

  I have a Macbook 15 "and there iMovie in it. I have a Logitech 1080 video camera. Is it possible to record directly on the Macbook?

  No, only from the camera into your Macbook.  Details at: http://help.apple.com/imovie/mac/10.1/#/movc665d799a

  You can however make a recording of your Logitech using Quicktime Player or photo booth, and then import the file from iMovie.

  Geoff.

• HP ENVY Phoenix 810 - 370st DT: how to record music on computer 8.1 CDs

  How to record music on computer 8.1 cd, I want to do it without itunes.  my computer is a HP ENVT Phoenix

  Hello

  I use Roxio Creator 2012 .

  You want to just "rip" a CD of music on the hard disk?

• What happens if the master boot record to your computer is damaged?

  What happens if the master boot record to your computer is damaged?

  A. boot sequence would be lost

  B. the operating system would fail to start

  C. a series of long and short beeps will be heard when starting the

  D. the post OFFICE would not launch

  Hello

  True, and in many cases, it can be repaired:

  Try these from a Vista startup disk command prompt - type at the command prompt and press
  ENTER after each.

  Bootrec /fixmbr

  Bootrec /fixboot

  Bootrec /scanos

  Bootrec /rebuildbcd

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and
  starting in Windows Vista problems
  http://support.Microsoft.com/kb/927392

  See this article here - to repair/rebuild using the Bootrec.exe tool Boot configuration data
  http://www.Vistax64.com/tutorials/163304-dual-boot-using-free-partitioning-software.html

  Sometimes using EasyBCD works when other methods are not.

  Recover the Vista or Windows 7 bootloader from the DVD
  http://NeoSmart.NET/wiki/display/EBCD/recovering+the+Vista+bootloader+from+the+DVD

  Recovering the Vista Bootloader with EasyBCD
  http://NeoSmart.NET/wiki/display/EBCD/recovering+the+Vista+bootloader+with+EasyBCD

  Repair the Windows Vista boot loader
  http://NeoSmart.NET/wiki/display/EBCD/repairing+the+Windows+Vista+bootloader

  If that works then run StartUp Repair twice the Vista boot disk, run once then
  Restart and then run again.

  I hope this helps.

• Connection issues - connection of a tape recorder to the computer (Windows 7)

  I was connecting a recorder to the computer (Windows 7) in order to play music on cassettes, a cable connecting the recorder output to the audio jack on the back of the computer.

  It has always worked perfectly, but I suddenly lost the sound. Going to "Control Panel - Sound" shows "line in" Panel "not connected". Certainly, it is plugged! I tried disconnecting and reconnecting the cable, restarting the computer, connect an another cassette recorder and I have now run out of ideas. Everything I try, in 'line' service continues to insist that it is "unplugged". (The function "StΘrΘo in" still works perfectly).

  When you plug the plug at the end of the head of the tape recorder, I receive a message saying "you have just plugged a device in the audio Jack" so presumably the decision itself is not defective.

  Any ideas?

  Former title: connection problems

  I was connecting a recorder to the computer (Windows 7) in order to play music on cassettes, a cable connecting the recorder output to the audio jack on the back of the computer.

  It has always worked perfectly, but I suddenly lost the sound. Going to "Control Panel - Sound" shows "line in" Panel "not connected". Certainly, it is plugged! I tried disconnecting and reconnecting the cable, restarting the computer, connect an another cassette recorder and I have now run out of ideas. Everything I try, in 'line' service continues to insist that it is "unplugged". (The function "StΘrΘo in" still works perfectly).

  When you plug the plug at the end of the head of the tape recorder, I receive a message saying "you have just plugged a device in the audio Jack" so presumably the decision itself is not defective.

  Any ideas?

  The problem has been resolved. I called our local computer store and they took the remote control of my computer and decided that, in the window manager Audio Realtek, the 'speaker setup' DD was somehow got moved from "Stereo" 5.1 speakers"fix that solves the problem but I'm perplexed that a configuration setting incorrect speaker should block the function 'In Line' leaving all other sound effects works perfectly; However, he seems to have done the trick. If this is not the first instance of parameters change in Windows 7 on their own accord.

  RF

• My acrobat 8 is recorded for a computer that has been hacked and is fried, but I can't reg to this computer and now I cannot use it for 30 days on this computer

  My acrobat 8 is recorded for a computer that has been hacked and is fried, but I can't reg to this computer and now I cannot use it for 30 days on this computer

  Serial number and activation support (no-Cloud) https://forums.adobe.com/thread/2041990 to adjust the number of activations

• How can I disable the software recorded on a computer I own is no longer, the computer no longer exists?

  How I can disable the software recorded on a computer I own is no longer, the computer no longer exists?

  Contact Adobe, contact the customer service

• Set the amplitude of mike when recording directly in hearing CC?

  I can't figure out how to set the amplitude of mike when recording directly in hearing CC.

  
  

  When I load hearing I have click on the waveform and create a file.

  
  

  I can then click on the Red record button and start recording, but the amplitude is very small.

  
  

  I know I can fix it in post editing but how to adjust the amplitude record raw?

  
  

  Well, I looked at the manual. If I try to use a microphone with this mobo, I'd be very inclined to mount the system audio front panel, as it seems to have an understanding of slightly different mic that work peut better (although I think that you must run the configuration utility to configure). The details of this are on page 30 of the manual. For starters, it seems that he might in fact be two mic channels, which probably means that they took little seriously, a little more than usual.

  I still think that the preamp is better, but I won't get it a chance to consider the issue until tomorrow.

• I tried to reload Nf6 Photoshop I get a response of "that s/n has no record of this computer" can you help me get it reloaded?

  I had computer problems and my computer was formatted and I lost everything, pictures, programs, videos, reports, etc., I tried to reload Nf6 Photoshop... I get a response of "that s/n has no record of this computer"... or something like that... can you help me to get reloaded?

  Your serial number appears on your account page?

  Find your http://helpx.adobe.com/x-productkb/global/find-serial-number.html serial No.

  NOTE: this is a public forum, so don't post NOT your serial number here!

  > or something like that

  Displaying the text of an error message will help the people to help you

• Module of recording direct to a Web site

  Hello

  I am facing a big problem during the construction of my site...

  I want to allow my users to Web site to record sounds directly on my site.

  It is as a function of Youtube that allows us to record directly from our webcam, but for me, it's only sound...

  All ideas

  Thank you

  You don't need a FMS (Flash Media Server) or other like Red5, because you simply record audio.

  To record video, you need a media server.

  You are welcome!

• Satellite A200-1YO - how to record directly from the computer?

  I have the Satellite A200 - 1YO Realtek ALC268 with Vista operating system.

  There is no option to directly record what is done on the computer. The audio input is only through micro. I have Creative Xtreme Audio Notebook added on too but you do want to save via its entry due to the reduction in the sound quality.
  I had previous portable Toshiba and the offered options "What U Hear" realtek

  I googled this search, and there seems to be a problem with Realtek. Is there a solution?

  Hello

  Maybe your sound card does not provide this functionality
  It is not impossible

  I have an another series Satellite phone and use the No. 23 freeware tool to record the audio stream.

  I record everything

  Maybe it could also be an option for you.

• A Canon GL2 can record directly to a mac via firewire

  Could you get it someone please let me know if it is possible to use a Canon GL2 and direct recording on the hard disk of a computer by firewire?

  Thank you

  With the right software, Yes.

• How do I plug my guitar to record directly...

  How do I plug my guitar to directly record a live guitar on Logic Pro X and a new iMac end of 2015?  (There is no (old school) in the port.)

  You will need to purchase an Audio Interface that has a... appropriate input port and is fully compatible with the version of Mac OS X you are using.

  Personally, I recommend the Motu... as their drivers and hardware products are high-end...

  http://www.motu.com/products/motuaudio/MicroBook

  However, there are other choices...

  Just keep in mind a lot of the lower end, audio interfaces cheap you will find there tend to have low or unstable drivers and are not often updated for months after the updates... resulting in headaches and frustration...

  "Don't buy a Ferrari of $200 K, put $50 on her tires and wonder why he behaves like a Kia..."

• Test the microphone works, but I can't save with recorder to the computer.

  I tested the microphone under voice identification. He says he works. When I opened the computer of the recorder of the window and click on 'start recording' nothing records. Also in my music software Sonar, the microphone no longer records. I went to 'troubleshooting' and the final message said: "the volume on the unit is low." Not fixed. How to increase volume for a microphone? I understand how to increase or decrease the volume of the speakers via the speaker ikon down in the corner, but you can never asked me to change the microphone volume. How do you do that? (If that's the problem!) Thank you. Operating system is Vista.

  Hello

  I suggest you to follow these steps and check if that helps.

  Method 1:

  Try these steps and check:

  a. Click Start, open Control Panel.

  b. click sounds, click the recording tab.

  c. click microphone, and then click Properties.

  d. under the controller information, check if the correct sound card is selected.

  e. click on the advance tab, under exclusive mode uncheck both boxes.

  f. click on apply, then ok.

  Check if it helps.

  Method 2:

  Try to update the latest drivers for the sound card and then check that if it helps, here is the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  It will be useful.

• How to record a sound record on my computer?

  I am trying to create a movie on Windows Movie Maker using a song that I recorded on my iPod. Movie Maker allows me to add music, but it forces me to seek in a folder that is already on my office marked 'music '. What I'm trying to understand is how to get music from my iPod to the folder on my computer. If necessary, I can re - register the song using my computer, if you tell me how to do this. I have a laptop Windows 7 and a 3G iPod Touch.

  I am trying to create a movie on Windows Movie Maker using a song that I recorded on my iPod. Movie Maker allows me to add music, but it forces me to seek in a folder that is already on my office marked 'music '. What I'm trying to understand is how to get music from my iPod to the folder on my computer. If necessary, I can re - register the song using my computer, if you tell me how to do this. I have a laptop Windows 7 and a 3G iPod Touch.

  =================================================
  If you want to download a copy of your registration, the following article
  maybe worth a visit:

  iOS: import personal pictures and videos of iOS devices to your computer
  http://support.Apple.com/kb/ht4083

  If you want to re - record the song on your computer the following
  the article may be useful:

  Windows 7 - audio record with sound recorder
  http://Windows.Microsoft.com/en-us/Windows7/record-audio-with-sound-recorder