Record from a microphone

Similar Questions

• I want to record from the microphone jack.

  I use windows XP on a HP Pavilion. I go to "All programs" and click on "Accessories" and then on "Entertainment", but the only option there is 'Windows Movie Maker'. How to scan discs a microphone? I need to download a new program? What is good and free, or at low cost?

  Open Movie Maker and go... Tools / chronology to tell...

  See the following article:

  Record a narration in Movie Maker 2
  and some of the microphne problems you might encounter.
  http://www.mightycoach.com/articles/mm2/narration-moviemaker2.html If Movie Maker is not enough... the following freeware may be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Audacity
  http://Audacity.sourceforge.NET/

  Recording with Audacity
  http://Audacity.sourceforge.net/manual-1.2/tutorial_basics_4.html Features of Audacity:
  http://Audacity.sourceforge.NET/about/features Audacity - Frequently asked Questions - FAQ
  http://Audacity.sourceforge.NET/Help/FAQ

• XPS 1530 M will not record from the microphone on the front panel

  I can't record using a condenser microphone connected to the mic in front of a Dell XPS 1530 M socket. This machine had Vista replaced with Win 7. The driver is: SigmaTel 15/02/2008 c. 6.10.0.5866

  Audacity using his editing program, save only the built-in microphones. Change the default setting to "Mic/Line In" ' in Control Panel > Sound > recording causes nothing to be saved. In Audacity preferences > devices > Line In / microphone is activated.

  On a forum thread, someone ' one supposed to allow Mike to front using what is shown in the screenshot (see my attachment). I don't see this Panel in one of SigmaTel tabs on my machine. In this same thread, it is also mentioned on a pop - up occurring when a microphone is plugged. This does not happen.

  Suggestions, please?

  Would have been on the XPS M1330 and M1530 models, you can use the driver IDT audio, R226903. It was reported to have helped with headset microphones in Skype. Might help with your problem with the microphone.

  Installation of ITO it remove all other drivers audio driver of Dell's record. (Go to c:\dell\drivers\ to expand all the folders and subfolders it.) Delete all the files that have a subfolder named "WDM").  Reboot the laptop and let Windows Installer sound driver audio native. Download the R226903 and extract it to the default location, but cancel the automatic installation. Go in for the audio controller device manager. Right-click on it and choose Update driver. Select to manually locate the driver and let Windows not seek. Find c:\Dell\drivers\R226903, and then click "next". Turn it back on.

• Help recording from stereo microphones in the Air

  I've been using this example of a model as it:

  http://cookbooks.Adobe.com/post_SimpleAudioRecorder___Microphone_Access_API_AIR_2_-16746.html

  While it does not save, it saves it in mono. Specifically, it combines the pickups in a channel and that puts on 2 channels, which could be a problem with the class WAVWriter that I use to save the file.

  Is it possible by air to record using the stereo microphones (left + right channels)? Maybe someone could direct me to a site/example usage of stereo microphones.

  Thank you

  Thanks for the info; Maybe just stereo is not exposed through the API of the AIR on the PlayBook.

• Equium L20-197: no not line-in jack - how to record from an external audio source

  Hello

  I am generally very happy with my Equium L20, but I now find some trouble which I assume are from cost reduction. For example, there are no micro shipped, so need to buy one for Voip purposes. And I would like to use this notebook to record from an external audio source, but now to discover that he has no line-in, and it seems that the microphone jack is mono only, even if it was possible to configure the audo map to use this to source line.

  I would be very grateful if anyone has any ideas for a solution workaround, possibly using a USB port.

  TIA
  Keith

  Hello

  What this USB external to the line adapter:
  http://speechtechnology.stores.Yahoo.NET/am--USB--adapter.html

  The adapter is especially useful for laptops or computers that do not have a Line In Jack or is not good sound cards

• "Recording with wavepad sound recorder with headset microphone does not.

  Record music on youtube with sound on a microphone

  I like rap I used to have windows xp, but my computer doesn't work and now I have a new one with vista. I use the same registration program that I used, but now it records only the sound into the microphone. My goal is to be able to record sound on the headphones with the words that I say into the microphone. I get my beats on youtube and I use sound recorder of wavepad.

  Hello coinstar.

  1 do you mean that you are not capable of recording using the microphone that is built with the helmet?

  2. have you checked if the microphone with the headphones work well?

  Make sure you setup recording properly on your computer. Run the configuration of recording when you connect the headset. Here is a tutorial that I found on the Wavepad website that shows how to set the microphone:

  http://www.NCH.com.au/KB/10010.html

  Important note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  Also connect the headphones with microphone and check if it works normally.

  Here is an article that will give you information on troubleshooting registration issues in Windows Vista:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-audio-recording-problems

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Record from VCR on the Qosmio F10 - 101 - no video

  I read a lot of topics but I need some information additional regardin my problem

  I myself Qosmio F10-101

  I tried to record from my VCR on computer, I connect the VCR output to monitor using the came with a computer cable laptop but audio is here and no video... no yes no picture, I used windvd creater which came with the laptop, but no picture, I also tried the s-video input and no image appear also as the program windvd unable to give the icons of all the devices connected to the laptop

  What should I do?

  Hello

  I know, you can not save to your VCR using the monitor and S-video, you can use the port fireware "located right next to the PCMCIA port on the left side of the laptop" with windvd.

  Thank you

• G510 recording from cassette player

  Hi people - looking for clues of what I need to record from an old tape of the bridge to the laptop. Using 3.5 mm male to male plugged in the combo Harbour, but sound does not appear in the recording software. The turntable to cassette has a unique 3.5 mm output auxiliary port. Do I need to use a USB audio adapter? In my view, there was similar problems with that, but couldn't determine a clear answer on a boardsearch. Thank you!

  solved by using a USB 3.5 mm connector. Perfect!

• my CD player repeat myself no CD not loaded but there is and it won't record from windows Media... Help

  my CD player repeat myself no CD not loaded but there is and it won't record from windows Media... Help

  Hello

  1. What is the exact error message associated with no CD loaded?

  2. do you mean to say Windows Media center?

  Perform the steps from the link below and see if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or any other programs (Fixit)

  Important:  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/

  Hope this information helps.

• During the Windows installation, I received the following message: Boot Record from CDROM tree research... OK press a key to boot from CD... Error loading operating system

  What is the cause of this error message

  during the installation of the operating system on a single computer, I met the following error message
  "The research tree Boot Record from CDROM... Ok
  Press any key to boot from CD... Error loading operating system"
  What are the causes of this error?

  Hi DavidMuya,

  To stop this message from appearing, follow these steps:

  (a) remove any CD from the drive before you turn on or restart the computer.

  (b) enter the BIOS and change the boot hard drive sequence instead. You will need to change if you plan to boot from a CD in the future.

  Note: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• life cam3000, I sound even when the volume is turned off and I want to record from the input card.

  Hi and thanks for your support.

  The lifecam 3000 is ideal for photography, but I can't find a way to change the settings for audio,

  and also, I have only the settins wmv for video.

  I search the Web for a program that can do both, but with no good result.

  I HAVE TRY TO DΘSACTIVER THE MICROPHONE, but the cam is not work whitout it.

  Even if the volume of the microphone to * 0 * I hear coming from the microphone of the camera...

  I want to playing me video drum but earing the microphone cam make a sound broooooov.

  With all that CV and a counter to delay the start and stop sewing,.

  a program and a complete cam and one of the best on the market for the price.

  I must say that I am running with vista 32B.

  Sincerely, Stensonn.

  If equipment has replaced the onboard audio hardware, the BIOS should then be edited, disable

  the integrated audio controller. If or other configurations exist, then we can use both, for to do, with only old

  installed audio hardware, Vista, mgr open the device, scroll down to sound, expand the tree, look for the hardware, R.click

  in this regard, select "Uninstall", output device mgr, pc shutdown... Install the new card, start the pc, enter the BIOS, disable the old, start

  Vista. Install new, install any drivers/software, vista installs auto... Once through, restart pc 2 X or so, once through, at startup.

  enter in BIOS, select old material, exit, install vista it automatically. The only problem, both are installed, but can only be

  run at a given time. It is / was average XP, probably the same vista. You can go to run, type: DXDIAG to run the

  Tests of direct X...

• Failed to load existing records from the database on SD card during initialization of the application

  When the Simulator is launched upward, not able to load existing records from the database in the Inbox, so no records appear in the Inbox even though they exist in the database. It seems to be a problem with the SD card in the Simulator - the file system for the SD card is not correctly initialized when the application starts first to the top. During initialization of the application tries to access the SD card by using the following code.

  Boolean

  sdCardPresent = false;

  Enumeration e = FileSystemRegistry.listRoots ();

  If

  (e! = null) { }

  While (e.hasMoreElements ()) {}

  root = (String) e.nextElement ();

  If

  (root.equalsIgnoreCase("SDCard/")) {

  sdCardPresent =

  true;

  }

  }

  }

  sdCardPresent is always set to false and was not able to access existing records from the database. Once the application is initialized and try to create the database, the database is created successfully on the SD card.  The code is the same as above when creating the database and was able to do sdCardPresent = true.

  Is there anyway to register or add the SD card during initialization of the application or any property as System.setProperty overide the path of the default directory value?

  I use BlackBerry 9550 Simulator. I checked the "file system using PC for files from the SD card" and I use "C:\bb\SDCard" for the file system of thr.

  Also tested on the BlackBerry and found the same thing, if the device is hard reset, then it not reading the SD card as well.

  Mark the thread as solved then.

• Is it possible to start a record from the source code?

  Hello world!

  I currently use JProfiler in combination with JUnit tests to collect metrics of resource consumption of features in our product.

  A runner for JUnit home starts and stops the recording of JProfiler and analyse recorded data. Then he compares the values to the pre-set limits, and fail the test if they are exceeded.

  Now, I want to change this option to use the flight recorder instead. I found an interesting article explaining how to parse files of .jfr here: using the flight recorder analyzers | Marcus Hirt
  

  Unfortunately I can not understand how to start and stop a robbery at the record from a JUnit runner, in addition to the use of the jcmd tool.

  Can someone help me?

  Thank you very much

  Tobias

  Hi Tobias,.

  It's pretty trivial in JDK 8 - just use the operations on com.sun.management:type = DiagnosticCommand MBean imitating the way you would use jcmd. Relying on the MBean JMC and corresponding APIs directly is not supported.

  That said, if you wish to register MBeans associated JMC, the following may be useful:

  Import java.lang.management.ManagementFactory;

  Import javax.management.MBeanServer;

  Import javax.management.MalformedObjectNameException;

  Import javax.management.ObjectName;

  public class {RegisterMe}

  private public static final String REGISTER_MBEANS_OPERATION = "registerMBeans"; NON-NLS-$1

  private public static final String CLASS_NAME = "com.sun.management.MissionControl"; NON-NLS-$1

  private public static final String MBEAN_NAME = "com.sun.management:type = MissionControl; NON-NLS-$1

  private public static final ObjectName OBJECT_NAME = createObjectName();

  private public static ObjectName {} createObjectName()

  try {

  return new ObjectName (MBEAN_NAME);

  } catch (MalformedObjectNameException e) {}

  throw new Error ("shouldn't be possible: could not take a new name of object" + MBEAN_NAME); NON-NLS-$1

  }

  }

  public public static void main (String [] args) bird Exception {}

  Ms MBeanServer is ManagementFactory. getPlatformMBeanServer ();

  ms.createMBean (CLASS_NAME, OBJECT_NAME);

  Ms. Invoke (OBJECT_NAME, REGISTER_MBEANS_OPERATION, new Object [0], new String [0]);

  System. .println ("Press enter to exit"); NON-NLS-$1

  System. in. read();

  }

  }

  Kind regards

  Marcus

• Export of more than 65000 record from oracle's 10 g to Excel

  I try to export more than 65000 record from oracle 10g to Excel, formulas using the report execution as a form of the oracle spreadsheet, but if note the limeted and increase when I found error.

  Gently, I found solution for this error without use package in the database and the directory in the server

  Thank you very much for the cooperation.

  I got a solution to my problem I using webutil and who is as follows:

  DECLARE

  A CURSOR IS

  SELECT column_1, column_2, column_3

  Of

  your table;

  path varchar2 (200);

  IN_FILE CLIENT_TEXT_IO. TYPE_DE_FICHIER;

  BEGIN

  -----------------------------------------------------------------------

  Path: = webutil_file.file_save_dialog (", file_name-online 'Summary': sysdate |'.) CSV ', File_Filter => ' CSV (*.csv) files. (* .csv |') ;

  IF file_name IS NULL

  THEN

  TAKE A BREAK;

  ON THE OTHER

  IN_FILE: = CLIENT_TEXT_IO. FOPEN (PATH: '.) CSV', 'a');

  CLIENT_TEXT_IO. Put_line (IN_FILE, 'title_1; title_2; title_3');

  I'M IN A LOOP

  : HAND. COUNT: = A % ROWCOUNT; -counter

  CLIENT_TEXT_IO. Put_line (IN_FILE, I.column_1 | ';' |) I.column_1 | ';' | I.column_1);

  Synchronize;

  END LOOP;

  CLIENT_TEXT_IO. FCLOSE (IN_FILE);

  IF Form_Success THEN

  END IF;

  END IF;

  END;

  Thanks again

  concerning

  ELIE SAID

• Delete records from sys.aud$ stored procedure

  We have a stored procedure that attempts to move the records from the table of sys.aud$ to a history table (in order to keep sys.aud$ to a more reasonable size, I guess - full disclosure, I have not written this proc). Base flow is:
  Select count (*) in the number of lines of sys.aud$
  If {(rowcount > 1000)
  copy all rows in sys.aud$ in the history table
  remove from sys.aud$
  }
  
  I says this proc used to work perfectly in a troubled past (I'm new on the client) but now has not worked for a while. When we try to compile the proc, we get the error
  "table or view does not exist", and the line is the "deletion of sys.aud$. The line "select count (*) from sys.aud$ ' seems to cause no problems, but the proc does not compile as is. If I comment out the line "remove from sys.aud$", however, the proc compiles very well.
  
  Confusingly, if I log in as the same account that owns this proc, I can run both the count (*) select from sys.aud$ AND remove clauses sys.aud$ with no complaint at all (by modifying slightly to work with 1 single record at a time, of course), but I can't seem the same to compile in a stored proc.
  
  I guess that it is related permissions? Can someone point me to the permissions of the owner needs to be able to remove from sys.aud$ in a stored procedure? Or is there something else that needs to be done here? Pointers much appreciated.
  
  Thank you.

  956928 wrote:
  We have a stored procedure that attempts to move the records from the table of sys.aud$ to a history table (in order to keep sys.aud$ to a more reasonable size, I guess - full disclosure, I have not written this proc). Base flow is:
  Select count (*) in the number of lines of sys.aud$
  If (rowcount 1000 >) {}
  copy all rows in sys.aud$ in the history table
  remove from sys.aud$
  }

  I says this proc used to work perfectly in a troubled past (I'm new on the client) but now has not worked for a while. When we try to compile the proc, we get the error
  "table or view does not exist", and the line is the "deletion of sys.aud$. The line "select count (*) from sys.aud$ ' seems to cause no problems, but the proc does not compile as is. If I comment out the line "remove from sys.aud$", however, the proc compiles very well.

  Confusingly, if I log in as the same account that owns this proc, I can run both the count (*) select from sys.aud$ AND remove clauses sys.aud$ with no complaint at all (by modifying slightly to work with 1 single record at a time, of course), but I can't seem the same to compile in a stored proc.

  I guess that it is related permissions? Can someone point me to the permissions of the owner needs to be able to remove from sys.aud$ in a stored procedure? Or is there something else that needs to be done here? Pointers much appreciated.

  Thank you.

  acquired through ROLE privileges are NOT applicable within the named PL/SQL procedures.

  GRANT DELETE ON SYS. AUD$ ;