Help recording from stereo microphones in the Air

Similar Questions

• Impossible to record in stereo microphone/line-in on Satellite P870-31N

  Hello

  I have a P870-31N (PSPLFE) I have bought recently, running Windows 8.

  Yesterday I connected my line of digital pianos to the line-in/microphone jack, using a stereo cable.

  I was unable, however, to get a stereo recording.

  I used the exact same configuration with another laptop (a Sony Vaio) and was able to record in stereo without any problem.

  I looked through all the options of the control panel for the realtek sound card, downloaded and installed the latest drivers from the Toshiba site, all to nothing does not.

  The manual indicates the 3.5 mm mini-plug lets you connect a mini-jack 3 drivers for stereo microphone input.

  Can someone tell me how to make this work?

  Thank you

  Hello

  I suppose that taking microphone laptop s does not support the feature line.

  3.5 mm on this laptop microphone allows the connection of a 3 drivers for stereo microphone input mini-jack.

  So you can plug in an external microphone into this Jack, but don t think you could use this and record the audio stream

• Help - why print sequence is off the air?

  Hi all
  I have experimented with a copy of the help system a customer at the same time RH7 w/packer and the RH8 trial, generate output for the help of AIR format. After generating & the .air package and look a new help file .exe, I point out the following: click on the drop down next to the icon print and three options are listed (print this page, the sequence of Print, print all help). Whatever the selection below, print sequence is always unavailable (gray). This is the case when I generate with both versions. Did I miss something in the settings?
  Thank you
  Katie
  
  Katie Carver
  Senior technical editor
  Doc-to-You, LLC

  Thank you, Peter & Rick and sorry for posting and before disappearing! (Bill Murphey... begin to solve the problems and a higher-priority task inevitably lands in turn moments later.)

  Rick, your explanation was very helpful to ensure that I had missed something. I didn't, but for some reason, compiling the WebHelp to a different folder did the trick. (I had been doing the active boxes coming did nothing even if I was selecting the subjects that were in the middle of sequences to browse legitimate.)

  Now that I have compiled the WebHelp to another folder, browse sequences work. I ran the new AIR Conditioner (overwriting my existing .air file), and the printing sequence feature also works.

  Thanks again for the troubleshooting help and have a great day!

  Katie

• Record from a microphone

  What should I do to record a message on my computer, a microphone?

  What should I do to record a message on my computer, a microphone?

  ===========================================
  Have you tried Windows Movie Maker Narration or Sound Recorder?

  Start button / Accessories / Entertainment / Sound Recorder
  (In XP it records only 60 seconds every time... but you can make multiple files)

  Windows XP - using the sound recorder
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/app_soundrecorder.mspx?mfr=true

  Record a narration in Movie Maker 2
  and some of the problems microphne
  you might encounter.
  http://www.mightycoach.com/articles/mm2/narration-moviemaker2.html

  Also the free Audacity software might be useful to try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Audacity
  http://Audacity.sourceforge.NET/
  (on the SourceForge download... page left-click...) Audacity 1.2.6 Installer)

  Recording with Audacity
  http://Audacity.sourceforge.net/manual-1.2/tutorial_basics_4.html

  Audacity - Frequently asked Questions - FAQ
  http://Audacity.sourceforge.NET/Help/FAQ

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Need help to connect a microphone to the hearing

  Hello!

  I am having trouble doing something that seems very basic. I can't set up my microphone to record in the hearing. I am a total newbie to any form of sound recording and don't know anything about. I'm going to be as specific as possible to help someone help me.

  I recently bought a microphone condenser Neewer NW-700. I have it running in a mixer Behringer Xenyx 802 via XLR to 2.5 mm (with a 3.5 mm adapter). Mixer does not have a USB connection so I ran it on my computer (Macbook Pro running OS X El Capitan 10.11.3 at the end of 2011) through a Behringer U-Control UCA222 USB Audio Adapter RCA.

  I went into Preferences > hardware Audio selected USB Audio CODEC for my default entry and exit and did the same thing in the settings of the sound of my Mac.

  When I went to Audition for record, the wave was flat and I could not hear everything that comes out of the speakers. I went to the Audio devices page on my Audio Setup and lunch where I was able to adjust the volume of Audio Out but not Audio In.

  This is as far as I'm away. I've been Google searching for about a week now and nothing has worked. I'm not sure it's a computer problem, a hardware problem or a hearing problem -as I said, I don't know anything about this kind of stuff.

  I appreciate all the advice. Thank you!

  I just googled your microphone and ryclark is spot on.   The XLR Plug to 3.5 mm cable included with microphone is completely useless - there are several videos that appeared on my taling research on this subject.

  You need an XLR - f for XLR - M cable to connect on your mixer, turn on the Phantom, follow-up instructions that I proposed above.

  I also write a letter to Neewer asking a discount because they provide a cable can possibly use.

• Creating records from two Tables at the same time...

  I would be very grateful if someone could help with the following query.
  
  I have two Tables, Tbl1 and Tbl2. Tbl1 has the following columns: -.
  
  Tbl1_Unique_ID, Description
  
  Tbl1_Unique_ID is of type ' * number *' and ' * PK * ', Description is of type' * Varchar2 *'.
  
  Tbl2 has the following columns: -.
  
  Tbl2_Unique_ID, Description, Tbl1_Unique_ID
  
  Tbl2_Unique_ID is of type ' * number *' and is the ' * PK * ', Description is of type' * Varchar2 *' and Tbl1_Unique_ID is of type ' * number *', is a ' * foreign key *' and is the ' * primary key *' from Tbl1.
  
  While I can create a page to display and create folders in Tbl1, I'm not course coding required to view and create records Tbl1 and Tbl2 simultaneously, as well as regarding the two together at the same time.
  
  I know that it involves one ' * INSERT *' statement, but I have problems the correct SQL query.
  
  Can anyone provide any assistance will be appreciated.

  Have you tried to create a form master / detail page? Because it seems that is what you need...

• How to display the records from a query in the non-base data field

  Hello
  
  I have a problem:
  I have a query with a lot of tables and column 6 (select a, b, c, d, e, f x, y, z, t, s, g where the conditions) and I use 3 parameters.
  I create 3 settings: datai,: dataf and: partner and a button with a trigger when the button is pressed.
  Then a create a block manually with six field non-database a1, b1, c1, d1, e1, f1.
  Now, I want to display all the records in my query in a1, b1, c1, d1, e1, f1 where a1 = a, b1 = b, etc. and all the records (if I have 20 record, it will display 20 records in the non-base data field) when I press the button.
  
  How I did it:
  I create a cursor with the query, and then
  start the open cursor
  loop
  Fetch cursor in: a1,: b1,: c1: d1: e1,: f1;
  end loop;
  close the cursor;
  end;
  
  It displays a single record in a1, b1, c1 only, and it must display 100 records and date for all fields.
  
  Can someone help me with this problem?
  Thank you.
  
  Published by: 928437 on October 1, 2012 02:55

  Creating a view and the query in a database block are a great solution.

  To use the block non-base of data:
  You are missing the most important Next_Record; command.

   Begin
  
  Go_block('X'); -- block X is the non-database block
  
  Clear_Block(No_Validate);
  
  open cursor X1;
  
  loop
  
  If :System.Record_status != 'NEW' then
  
  Next_Record;
  
  End if;
  
  fetch X1 into :a1,:b1,:c1,:d1,:e1,:f1;
  
  Exit when X1%NOTFOUND;
  
  end loop;
  
  close X1;
  
  end;

• Microphone is not record audio (my voice) during the recording of videos!

  So, today I went to check on some of my video files to modify and at their reading, I heard no noise. I was confused by this because in the past, my microphone was fine and should record audio without a problem. But all of a sudden it stopped working at all, at least for the record there. When I'm in Skype calls, my microphone seems to work because I can be heard. But when I try and save, my microphone is not working. I record with Fraps and tried a lot of different options within the system itself. I tried "His file Win7" stereo and surround, and two of them did not work. I even went to Skype call testing service to see if my microphone still worked, and when it reproduces the audio I could hear myself using the microphone. Please help me because I don't know what the problem is!

  Edit: Forgot to say that I tried to record with no microphone but the eternal mic and I have all his be picked up when recording, but when I tested it with Skype, I could hear audio.

  Re Edit: So I tried later and tested with my microphone and could not hear any audio, but when I used the computer's microphone, I could hear audio! So that leads me to believe that my mic is broken, but I can't be sure.

  Hello

  First I want to apologize for the delay in responding.

  Here, in this scenario, this could be a problem with the hardware or driver issues. I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the troubleshooter audio recording and check if the problem persists. See the following article to run the troubleshooter in Microsoft Help.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-recording-audio-Troubleshooter

  Method 2:

  Try to install the latest audio drivers, including drivers for the chipset and check if it works for you.

  See the following Microsoft Help article to update the drivers for hardware that does not work correctly.

  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  If the problem persists, then it would be best to contact the manufacturer of equipment computer for more help on this issue.

  Please reply with the status of the issue so that we can better help you.

• remove the last record from the plsql table

  TYPE r_LOOPElement IS RECORD (TermID   NUMBER 
                                        );
  
  TYPE t_LOOPType IS TABLE OF r_LOOPElement INDEX BY BINARY_INTEGER;
  i_CustomerLoop      t_LOOPType ;
  
  i_CustomerLoop(1).TermID=1;
  i_CustomerLoop(2).TermID=2;
  i_CustomerLoop(3).TermID=3;

  Under certain conditions, I need to remove the last record from i_CustomerLoop
  
  whichi s the best way to do it. because I sometimes get duplicates for TermID in this plsql table.

  Hello

  See [removing items from Collection (DELETE method) | http://download.oracle.com/docs/cd/B28359_01/appdev.111/b28370/collections.htm#CJAFGFIG]

  Kind regards

• Missing Audio device (Microphone) on the Satellite A500-026 (PSAR2A 026002)

  Hello list!

  I have a laptop A500-026 Toshiba for presentations (via overhead projector) and internet communications (Skype, etc.).

  At a recent presentation, I was using the internal speakers of the place (plug in the line-out jack on my A500), but to receive a feedback from my microphone, I had used successfully in my Skype (using the built-in webcam and microphone on the A500). I tried all the solutions to cut the microphone (by selecting RIGHT click the speaker icon - recording devices do not seem to cut the Microphone) and finally the pressure and the stress of the situation too rolled my given what I was actually doing.

  Now, I don't have ANY "recording devices" AKA Microphones on the system, and I spent the last 4 days trying to reinstall the built-in microphone. I reinstalled the RealTek drivers, but there is still none identified microphone.

  All help to restore the built-in microphone of A500 would be accepted with gratitude!

  Megan in Sydney

  Hello

  You should check if the microphone has not been disabled.

  Go to control panel of-> sound-> recording tab
  You need to right click and must enable both options called hidden devices and see the disabled devices.
  Now you should see 2 microphone inputs; a second and internal microphone should belong to the external microphone jack.

  If you want to use the internal microphone and then mark it as a default device.

  See you soon

• Error: Failed validation of the AIR. Invalid namespace

  Hello

  Just downloaded and installed the Webworks 2.2.0 for Tablet OS SDK (https://bdsc.webapps.blackberry.com/html5/download/sdk) and v3.1 to Adobe AIR SDK from Adobe.

  When I tried to compile applications Webworks, I got following error:

  [C:\Program Research In Motion\BlackBerry WebWorks SDK for TabletOS\bbwp] bbwp... \test.zip
  [INFO] Parsing of the command line options
  [INFO] Bbwp.properties analysis
  [INFO] Validation of archive WebWorks
  [INFO] The analysis of config.xml
  [INFO] The application of filling source
  [INFO] Compiling applications WebWorks
  [INFO] Packaging of the record bar
  Error: Validation of the AIR is not
  \Temp\bar-app5208961890444725744.XML: error 102: space name invalid http://ns.adobe.com/air/application/2.7

  I have never such a problem before when using the Webworks SDK 1.x and AdobeAIRSDK 2.5

  I tried to change the namespace AdobeAIRSDK in C:\Program Research In Motion\BlackBerry WebWorks SDK for TabletOS\bbwp\AirAppTemplates\src\WebWorksAppTemplate-app.xml, but I kept getting errors:

  Error: Failed validation of AIR... error 102: space name invalid http://ns.adobe.com/air/application/3.1

  Error: Failed validation of AIR... error 102: space name invalid http://ns.adobe.com/air/application/3.0

  Error: Failed validation of AIR... error 102: space name invalid http://ns.adobe.com/air/application/2.9

  Error: Failed validation of AIR... error 102: space name invalid http://ns.adobe.com/air/application/2.8

  Error: Failed validation of AIR... error 102: space name invalid http://ns.adobe.com/air/application/2.6

  Error: Validation of AIR... failure error 305: initial window content SWF version 11 exceeds namespace version http://ns.adobe.com/air/application/2.5

  I Googled, it resembles a known problem in Adobe but I got are the fix for Adobe Flex development.

  How can I fix for SDK Webworks?

  Thank you

  This is usually caused by people simply crush their old AIR SDK installation instead of using a brand new installation of it and using our Installer. When you installed the SDK latest were you pointing to a pure install 3.1?

• Remove prepared record aid set out in the OPS.

  Dear friends,
  
  I have an obligation to remove a record from a table using the connection parameter, how do I do this using
  prepared, statement
  
  I have this below code but its not working at the moment. Can someone help me to do so.
  
  public void DeleteAttachment (String DeleteheaderId)
  {
  
  
  Conn Connection is getOADBTransaction () .getJdbcConnection ();.
  
  Try
  {
  
  
  System.out.println ("-to the INTERIOR of the TEST WHO-");
  
  String query = "DELETE FROM SDM_ATTACHMENTS WHERE PARENT_ID =: 1";
  
  PreparedStatement stmt = conn.prepareStatement (Query);
  stmt.setString(1,DeleteheaderId);
  stmt.executeUpdate ();
  
  
  }
  
  catch (System.Exception Exception)
  
  {
  
  throw new OAException ("Error in the application of staffing" + exception, OAException.ERROR);
  }
  }
  
  
  Thanks in advance,
  Keerthi.k

  Hello

  use the code below

  public void DeleteAttachment (String DeleteheaderId)
  {

  ResultSet rs = null;
  OADBTransaction trxn = (OADBTransaction) getTransaction ();

  Try
  {

  System.out.println ("-to the INTERIOR of the TEST WHO-");

  String query = "DELETE FROM SDM_ATTACHMENTS WHERE PARENT_ID =: 1";

  PreparedStatement stmt = trxn.createPreparedStatement (Query, 1);

  stmt.setString(1,DeleteheaderId);
  RS = stmt.executeQuery ();

  }

  catch (System.Exception Exception)

  {

  throw new OAException ("Error in the application of staffing" + exception, OAException.ERROR);
  }
  }

  Thank you
  Pratap

• Thank you for contact I can not access my ipad air disable I try to reboot same issue pleas help me I have a lot of data in the air from my ipad

  Thank you for contact I can not access my ipad air disable I try to reboot same issue pleas help me I have a lot of data in the air from my ipad

  Here you will find a way how to activate your iPad If you have forgotten the password for your iPhone, iPad, or iPod touch or your device is disabled - Apple supports

• Help with the query to select only one record from the result set in double

  Hello

  Please help with the query. Version of Oracle database we use is 10g R2.

  I have a vision that is duplicated IDS, but they are used across the different functions. See below examples of data. Please help me with a query to select only one record (based on ID regardless of the area) from the bottom of the result set of duplicate records. For what is the point of view is there unique records, given the combination of the fields ID, Org, DF, dry, Sub-Sec

  ID	Org	DF	Sec	Sub-Sec

  
  (163)CQCPDMCPDMHD(163)PCENGENGENG(163)CQASICASICIS8888TSTACTACTAC(163)TSHEHESW6789CQINFOINFOFOS6789PCSECSYSSECSYSINFO16789TSSECSYSSECSYSINFO29009PCBMSBMSBMS1

  My result set must eliminate the duplicate identifiers regardless of whoever we choose of the result set. (I mean without distinction Org, DF, s, Sub-s). My expected result set should be.

  ID	DSB

  
  DF
  SEC
  Sub-Sec
  (163)CQCPDMCPDMHD8888TSTACTACTAC6789CQINFOINFOFOS9009PCBMSBMSBMS1

  
  

  Thank you

  Orton
  

  Hello

  This sounds like a job for ROW_NUMBER:

  WITH got_r_num AS

  (

  SELECT id, DSB, df, s, sub_sec org

  ROW_NUMBER () OVER (PARTITION BY ID.

  ORDER BY org

  ) AS r_num

  OF view_x

  )

  SELECT id, DSB, df, sub_sec s,

  OF got_r_num

  WHERE r_num = 1

  ;

  He is a Top - N query example, where you choose the elements of N (N = 1 in this case) from the top of an ordered list.

  I hope that answers your question.
  If not, post a small example of data (CREATE TABLE and INSERT, only relevant columns instructions) to your sample data and the results desired from these data.  (I know that you said that you were a view selection.  Just for this thread, pretending it is a picture and post simple CREATE TABLE and INSERT statements to simulate your point of view).
  Point where the above query is to produce erroneous results, and explain, using specific examples, how you get the right results from data provided in these places.  (I didn't quite understand the explanation above.  I don't know why you want to

  ID ORG DF DRY SUB_SEC

  --      ---     --      ---     -------

  1234 CQ DPRK DPRK HD

  and is not

  1234 IS CQ ASIC, ASIC

  or

  TS 1234 IT IT SW

  or

  1234 CQ ASIC ASIC HD

  )
  If you change the query at all, post your modified version.
  Always say what version of Oracle you are using (for example, 11.2.0.2.0).

  See the FAQ forum: https://forums.oracle.com/message/9362002

• help in registration of the records from two tables

  HI: I have two tables joined the first field. The field is the primary key in the first table. Need help listing records from both tables with each a line/record results.
  

  create table EVENTS (
  event_key varchar2(64) primary key,
  event_description varchar2(64),
  create_time int
  );
  
  
  create table EVENT_UPDATES (
  event_key varchar2(64) NOT NULL ,
  update_description varchar2(64),
  update_time int
  );
  
  
  insert into EVENTS values('Event1', 'This is event1', 1);
  insert into EVENT_UPDATES values('Event1', 'Ticket created', 3);
  insert into EVENT_UPDATES values('Event1', 'Event cleared', 10);
  insert into EVENTS values('Event2', 'This is event2', 4);
  insert into EVENT_UPDATES values('Event2', 'Ticket created', 6);
  insert into EVENT_UPDATES values('Event2', 'Event cleared', 8);

  I want to print each record in the table of EVENTS such as a line and the corresponding records in EVENT_UPDATES as a line like this record
  

  Event1   1     This is event1
              3     Ticket created
              10   Event cleared
  Event2   4     This is event2
              6     Ticket created
              8     Event cleared

  TIA
  Ravi

  select  case weight
            when 1 then event_key
          end key,
          time_val,
          description
    from  (
            select  event_key,
                    create_time time_val,
                    event_description description,
                    1 weight
              from  events
           union all
            select  event_key,
                    update_time,
                    update_description,
                    2 weight
              from  event_updates
          )
    order by event_key,
             weight
  /
  
  KEY          TIME_VAL DESCRIPTION
  ---------- ---------- -------------------------
  Event1              1 This is event1
                      3 Ticket created
                     10 Event cleared
  Event2              4 This is event2
                      6 Ticket created
                      8 Event cleared
  
  6 rows selected.
  
  SQL> 
  

  SY.