Record narration scratch track... no icon registration?

Similar Questions

• synchronize slides with recorded narration

  I try to synchronize and save slide show with balls and slides synchronized with the recorded narration but recorded track replay in registration mode although it plays fine in playback mode.

  recorded track replay in registration mode although it plays fine in playback mode.

  Do you mean you can select: play slide show recorded, but it does not at all read or he plays bad?

  If so, disable the check from: play > clear the record... then save the slide show again.

  

• How to use an existing record as a model in a registration form to create new

  Hi all
  
  I have a chart with lines of configuration, currently accessible by a combination of report/form. It works very well to create, view and edit data.
  However users need often to create a new record that is 90% as an existing record.
  What they want is to go to an existing record and use it as a template to create a new record (by clicking a button ' create a copy of ")
  
  My attempt at a solution
  -When the button is pressed to send users to the normal form and pre-fill some elements with the 'model' record data, after which everything is the same as creating a record from scratch
  
  What I'm trying
  -as above, redirect the user to the page 'create' and sent the values of the desired via the URL syntax items. Failed because I have about 20 items and the settings button doesn't let me add 10 then more (besides it not beautiful to see)
  -Instead of sending via a URL, I tried only to send the model id and have a charge "before the process the header" the values of the element in the session state. Failed because the elements of the page are all (load form source each time) because they are the columns of database
  
  Constraints for the solution
  -No, I can't go first to insert a copy of the record and then display it in edit mode because the remaining 10% of the registration can not be copied because of table constraints. They have severe limitations, who needs the user to input.
  -(et non je ne peux pas insérer d'abord deles de données factices, qui est solution un pauvre homme)
  -I would like to reuse the current form to create/edit as it contains a lot of business rules and constraints. Dubbing then the page put me upward with a double load of maintenance in case of future changes in the management rules
  
  I would be grateful any good clues for resolve this condition
  
  Best regards
  
  Geert

  Why not having a standard configuration of report and form, except on the page of the form, you have a button called "create as copy". Add a submit after procedure, before the DML, that defines the element that contains the PK to null. The DML so consider this as a new registration and add the values in the table.

  See you soon

  Shunt

• Make the midi recording when the track is not selected

  Hi, asking for my friend and will try and find a solution when I get home, but...

  My friend (using logic 9.1.8) made some record with about 12 actors/singers alive. I suggested to him that he must save the midi for keyboard player (who is also the composer of all parts) as well as the audio just to give them some flexibility later. It is a great keyboard player and uses its own external keyboard. (i.e. not logic instrument). All the other singers/actors are all audio.

  So it is easy to implement but as such sessions can become a little hectic and although the midi for keyboard track is in record mode, the midi does not record unless the track is selected on the left. Sometimes, in the madness of him the entire midi track remains not selected and if the midi data does not get saved. Is it possible to routing in the environment where the midi will get recorded although the midi track is not selected? Don't forget, the midi track is always made armed.

  Thank you very much

  Looks like you entered only followed for the targeted track has allowed...

  This picture isn't in X 9 - but it's the same setting...

  Make sure that this is not the case-

  

• SE - X1condenser microphone get distortion while recording the vocal tracks

  I recently bought a microphone condenser SE - X 1, I used it to record vocal tracks on hearing of adobe 1.5 through an audio interface, m-audio fast track pro, my problem is that I get a lot of distortion, even when I reduce the input volume, can anyone suggest a solution. My os is windows vista 32 bt

  Hello
  1. Since when are you facing this problem?
  2. don't you make changes to your computer before the show?
  
  To update the drivers or uninstall and re-install complete drivers again. You can also check all of the settings within the program on both ends.
  You can also follow the given link:
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
  You can also check:
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

• Firefox not displaying browser doesn't not Apex Bug Tracker App icons

  HI -.

  I use canned Apex Bug Tracker App version 2.0.12 with updated Firefox ESR 31.7.0 on my Windows 7 PC and icons that are supposed to appear on the left side next to the links of 'Home', 'Products', 'Bugs', etc. in the App are not there, only a square with hexagonal numbers it appears to place the icons.

  It's really ugly and it makes users confused about if there is another set of button pressing.

  I also have IE8 (8.0.7601.17514) on my PC. It has the reverse problem where it shows the icons but interfere with the 'Home', 'Products', 'Bugs' etc. captions.

  Is it a browser that keeps Apex Bug Tracker app has been designed to support?

  Dan Nygren

  ,

  The solution is that Apex displays icons using a custom font, and Firefox was not downloading and using this custom font because Firefox is configured to use my fonts favorite instead of the police of the page.

  Difficulty click on Firefox in the menu top of the page:

  Tools-> Options-> Fonts and Colors (Advanced)-> Select checkbox "allow pages to use their own fonts.

• How to record on a track

  Well, I did a beat in FL Studio and imported to AA3. But every time I try and record my voice just clears the track and is not on the top of the track. SO basically its sings me without a heartbeat. How do I get it during the recording of MI, where I can hear the track then save it by hearing still.

  You will need to work in multitrack view, using a track to beat your previously saved and a new to record your voice on.

• tape recorder in Vista how to check registration is ongoing

  Need to know how to check the recording is underway displayed constantly "Stop Recording" and the result of game.
  Advanced software is available from Microsoft to view more results and status?
  Cannot call or open the previously saved file and add voices for recording.
  With the help of digital recorder with minicable headphone jack on voice and recorder connected to the microphone on computer decision-making.
  Green light appears on the ICDBX800 of Sony, but no other display is visible other advancing time.

  Hello

  What happens when you try to open the previously saved files?

  When you start recording in sound recorder, you can check the progress bar that is green and also see the time elapsed recording.

  

  There is no other software to check the status or the sound recorder.

  Kind regards
  Afzal Taher
  Microsoft technical support engineer.

• Newmy created records office show a lock icon

  I have improved my quickbooks and now if I create a new folder it places an icon of padlock above.  All my security settings seem to be normal (I checked other messages before posting my question).  I am went under the desk of windows Explorer and went to properties and chosen security.  The access column all seems normal.   Any other ideas?

  Thank you

  Phillip

  

  If your lock looks like this, it means that it is not shared.

  Right-click on the folder and see share with...

• I can not record narration box lights up so I can't add narration to my video of the EP 9

  I use PE 9 and I am trying to add narration of photos that I have inserted in my video.  I know that the microphone is connected to my desktop, as I hear my voice when I put on the headphones and speak into the microphone.  When I click the menu drop down and 'add an account' appears in the narrative, but none of the buttons inside the box light up.  Don't know how to try to fix this.

  You must select your microphone:

  Edit > Preferences > Audio hardware. Then, click on the button of the ASIO and select your microphone in the input tab.

  

  See you soon,.
  --
  Neale
  Insanity is hereditary, get you your children

• How to record simultaneously several separate tracks midi controllers?

  I have a big keyboard, a travel size keyboard and a battery of midi. How can I make these intstruments of different control software that record in different tracks? Is how easy it to do?

  1 / all the midi keyboard must use different channels

  2 / put self demix in save settings

  3 / create your tracks and make sure that you save all enable them (important)

  The value of each channel in the track inspector to match one of the keyboards.

  Press record.

  Live sound is displayed across all titles above... However registration will be on a track, but when you press stop - all parts of instruments will move to their midi channel assigned, thus providing a separate for each keyboard tracks.

• Crackle on audio/entry track record - no buffer, plug-ins or sound card. AAARGH!

  I have a slight Crackle on phonograms and supervision right of entry and via these forums and other troubleshooting failed diagnose the problem. Seems to be a product where caused by the audio signal, as occurs in response to an audio input (guitar and bass), not a constant or random noise. A faster attack of the audio signal produced more noticeable crackling.

  It happens to all sizes of the I/O buffers

  CPU load does not seem to be a problem - CPU monitor, both within the logic and across the system may display less than 10% (between all hearts) and it happens when dry recording in a project with a single track (audio) without plug-ins.

  Established between Apogee Duet and Scarlett Solo using different cables and which makes no difference.

  Does not occur during playback back already recorded audio - only new records and monitoring live (or recorded on a track and playback) entry

  Removed the unused midi drivers from (a thread somewhere suggested that for a similar problem).

  .. I am now mainly to a loss of the cause. Don't you no creaking when recording an audio file to QuickTime via the loudspeaker internal, next step, I can think of is to install Garageband (but reluctant to pay apple even £3.99 they want to download it to the app store!) and see if crackle present in audio recordings, in order to reduce it to a software problem (fingers crossed) all the material from the laptop. Or get a copy of logic 10.0 and see if the problem persists in this.

  Recently reinstalled logic 10.2.1 after repeated crashes (and abandonment of strength) when manually move the playhead... as well as other minor bugs 10.2.1 seems to have been shipped with, but this problem started a week or two after re - install, no problems so far here.

  As someone has any ideas other than a glance phone to Apple, which I fear would be very useful even when it doesn't seem to be a known issue.

  Thank you

  Sam

  MacBook Pro (retina, early 2013)

  10.10.5 Yosemite

  INTEL CORE I7 TO 2.7 GHZ

  16 GB OF RAM

  Logic Pro X 10.2.1

  Apogee Duet/Scarlett Solo

  Fixed. Questions of the instrument.

• Trying to record several tracks at once with mixer (two microphones)

  I have an Alesis Multimix 4 and two microphones plugged into the mic 1 and the two mic inputs.  I am trying to record both at the same time, in two separate ways.  I put Device Class on ASIO in the section hardware Audio and delected ASIO4ALL v2 for the device.  My mixing table (I guess) appears as CODEC audio USB in the ASIO4ALL settings.  When I return to my multitrack setting, I gives me four options for the incoming audio signal:

  Audio Front Mic Input 1

  Audio Front Mic Input 2

  USB Audio CODEC 1

  Codec USB Audio 2

  No matter what combination I try, when I record, the two tracks pick up the two microphones.  My goal is to isolate the two, so I can apply different settings to both titles later, adjust the mix etc...   Audio only comes when I take the USB Audio option.  Thanks in advance.

  Brett

  I think you have the right driver selected, otherwise there Wouln't work not at all. The most obvious thing to ask you if (I'm sorry if this is too basic) is where you have the pan value orders? For each microphone to record on one channel, you will need to have a panned far left and the other right hard panned. If you let the two dead panned Center, that's exactly what you get - the two microphones on both channels.

• Redflagging spots of different time in a double track to record via the hearing

  I would really appreciate if you could help me. I have a record to double track. I'd be able to redflag point A in the left channel and point A' in the right channel? Hearing would be able to tell me precisely the difference in time between these two positions? Would I be able to put several redflags in the left channel and the corresponding number of redflags in the right channel? Hearing would be able to tell me each lag in each corresponding pair of redflags? "For example, the difference between A and A', B and B', C and C ' etc. If so, how should I proceed?

  I'm trying to use this feature to measure the large ear-voice of simultaneous interpreters. The left channel would contain the original, while the right channel contains the translated version. That's why I need to frequently different redflag in both channels.

  Thank you very much for you help anything that might offer.

  In the marker list (you can dock a pane next to the main editing window if you want to - which makes it easier to get to), highlight the two references you want to the Group (Ctrl-click selects more than one), and then in tools in the lower left corner, click the one-fifth of the six - this is the tool "merge selected." Timing results will be immediately displayed in the list, with the two markings showing now a unique range benchmark.

  For example, if you select 1 and 3 and combined marks, you would still have cue 2 left you could bundle it with 4. That would give you two marker ranges overlapping that, if you marked, you can refer to each side of the audio.

• Recording disabled after having accidentally automatic punch in and out

  Sorry if this is an obvious question, but I can't seem to find a way to get him...

  While he was recording an audio track, I clicked within the chronology of the creation of a white vertical line in the track where I clicked on a software instrument track. This triggered the auto punch and punch red car bar appeared (a feature that I have not yet used). I searched the community and learned activate you perforation auto off with control + Option + command + P... it turned off, but it also disabled the recording track.

  After turning off the auto punch, the track I was recording monitors still audio entering until what I hit the record button. But as soon as I click the button registration entrance monitoring turns off and no sound is recorded.

  You can also see this screenshot the cycle bar has yellowed a hollow. Why would that happen? (This auto punch after turning back, after accidentally allows it.) The track record on is "Ac guitar - R" - as you can see that track is selected, it seems to be enabled for the folder and 'I' is selected for an input control, but as I mentioned follow-up entry stops as soon as I click on the record button and nothing is recorded on the track...  But everything was going well until this thing of automatic punch.

  

  I use Logic Pro 10.2.0

  If someone with more experience can explain what happened so I can avoid it in the future, it would be a great help. Thanks in advance!

  One more thing... This cycle described yellow bars does not work like a range of cycle since that happened.

  This screencast shows what I mean: https://youtu.be/_udEsAazPeA

  I press play and playback starts from the position of the cursor instead of at the beginning of the range chosen cycle. (Ditto for trying to cycle-registration.)

  How can I turn on/off functionality of cycle to get cycling normally, with solid yellow bar?

  Also, I just leave the logic and reopened the project and tried to save a new game on a software instrument track and it will not save, even if the track is enabled for recording.

  So apparently I can't record something again in this project of song (audio or software), until I know how to fix what went wrong