Record of cholesterol given in the application of health

Similar Questions

• No limit on user input in the application of health

  Hello

  Just try to understand why Apple has decided not to restrict the values a user can enter manually in the application of health.

  A user can enter ridiculous values that exceed the display range of input fields, but still reflected in the graph and the journal.

  No warning or message is given to indicate the user to prevent them from entering these values. Just trying to figure why?

  We are not Apple, so don't expect a response. By all means, please send feedback Apple.

• How do MANUALLY enter you data into the application of health 10 IOS? There is no symbol and touch edit only gives you the option to delete existing data.

  I checked in the application of the health and read the Apple support page. They show the screen for 10 IOS on an iPhone, but their instructions don't work. There is not a Plus symbol to add data manually. It has only an editing tool that you can touch and only allows you to delete data.

  Hi, rmetzker!

  To manually enter the data points in the application of health, first go to the display of data on health as shown below.

  

  Then select category to which you want to enter data in (I'll use body measurements for example), then press on what data you enter (measurements > weight). In the upper right corner, it will be a plus + icon for you to manually enter your own data points.

  

  I hope this helps!

• How to put in place measures in the application of health?

  How to put in place measures in the application of health?

  What do you mean 'the configuration steps? If you want steps if poster on the health dashboard, tap on health at the bottom of the screen data. Tap fitness. Tap measures. The value "Show on dashboard" on.

  The health app is really more than one application storage and synchronization. You can't do things as targets for a particular metric. If you want to set a goal of step and follow it, use one of the many followed apps available that can extract data from health. Map My Fitness, My Fitness Pal, Jawbone UP and Fitbit (both can be used with the phone if you have an iPhone 5 or a later version). If you like to compete with others, the Club activities is fun.

• Even if I have cookies recording enable when I restart the application in that I have to enter all of the newspapers in detail yet. How do use cookies stored?

  Have the ability to save cookies and all the other stuff already activated, I connect to several sites (e.g. gmail).

  When for some reason I restart the application, the site prompts me to fill again in my log in details. The strange thing is that on my desktop PC, it seems to have exactly the same parameters however save in this case, or by using saved cookies actually works.

  Which is maybe a problem of Ubuntu? I do not know. But some profile settings are reset any time that I opened the application.

  Any ideas?

  Thank you

  Try to clear your Cookies for the sites concerned.
  
  Tools > Options-> life privacy - Cookies = the button show Cookies
  
  Enter the domain name in the top search bar and all Cookies for this URL will be displayed. Unless you can figure out which is Cookie to "remember me", you will need to delete them all.

  Hold the {Ctrl} key while you click each Cookie in the small window. When this list is all highlighted, click the Cookie delete button at the bottom left.
  
  When you are finished click Close.

  If this problem persists, you may need to delete the __cookies.sqlite__ file in your profile folder.
  
  http://support.Mozilla.com/en-us/KB/profiles#How_to_find_your_profile
  
  You might need to view your "hidden files and folders" through Options of folders in the control panel

• The application of health on my new 6s shows "no data" power, active energy and stand hours of rest.

  Health app shows "no data" power, active energy and stand hours of rest

  Hello, Mjalderman.

  Thank you for visiting the communities of Apple support.

  I understand that some application of health data is not followed.  Looks like you don't have a device such as an Apple Watch or similar tracker connected to your iPhone 6s.  You would need a type of source or fitness tracker to collect these data before it would show in these categories.

  Collect health and fitness

  Manage the health data from multiple sources on your iPod touch, iPhone, or Apple Watch

  I have included a few options of our Apple store to give you an idea of what is needed to keep these categories.  You are not limited to these options.

  Fitness Tracker

  See you soon

• Perform the actions that I record with my sync to Apple Watch to health app on the iPhone

  I've always wondered to this topic, so lets say go for a walk with only my watch and without my iPhone. Once I get home I synchronize my watch with my phone, all the steps I did without my phone will be on my dashboard health app or not? If it is anyway I can do synchronize?

  Thank you

  Mike

  Hello

  Yes, steps recorded by your watch will be shared to the health app automatically after your watch has reconnected to your iPhone.

  Health and fitness data from any other source you can add over time (for example, blood pressure monitor, scales, etc.), the iPhone and Apple Watch are grouped within the health on iPhone app. Combined data is reflected in the application of health dashboard, which also adjusts the results (for example, the number of steps) to avoid any double counting of data from different sources.

• Arm movement is recognized as steps in the application of the activity on the Apple Watch?

  Happy new year to you all

  I am the happy owner of a Apple Watch OS2.1 running, but I think that the watch records the movement of the arm as the steps in the
  Fitness app?

  Today I was at my desk and moved no more than a few times get coffee (10 steps), the application of the activity
  the clock tells me that I moved 1 659 equal to 1.47 KM steps and I have
  a hard time to see this may be correct (work of my office at home, so basically
  went to my room to my office (max 50 markets)

  I calibrated the watch with 2 x 20 min outside walks with my phone with me and correct installation
  the data GPS on my phone, but the problem is the same, someone else has the same type of questions?

  Look forward to the thoughts of entry or comments, you may have.

  Hello

  Happy new year!

  In addition to the calibration of your watch, it is also important - for more accurate estimates of activity - to ensure that your personal information is correct. To verify that it was entered correctly and update over time:

  -On your iPhone, in the application of Eve, go to: My Watch (tab) > health > edit (top-right).

  However, it is possible that the numbers you quoted are correct. Even with a relatively sedentary lifestyle, regular movement around the House or at work can soon add up.

  To check the data behind the totals:

  -On your iPhone, in the application of health (not the application of the activity), go to: health Dats (tab) > Fitness > steps.

  -The graph shows your steps per day, week or month (use the tabs at the top to change that).

  -Press show all data to view data for each day.

  -Tap on a day to see each data point, along with the data source (for example, iPhone, Apple Watch).

  When you present data in the dashboard, where data for any particular measure were available from several sources at the same time, the only health of them, app chooses automatically in order to avoid double counting.

• Where are the application local tomcat connects to windows?

  When using debug with screens in OPM, I sometimes get errors such as the following error trying to look at the Document Summary Interview with HealthyEating example:
  
  An error occurred trying to process your request.
  
  This error has been recorded and is available in the application logs.
  
  Support and assistance, please contact [email protected].
  
  Where do we find the logs?
  
  Thank you.
  
  Published by: Paul Fowler on 3 may 2012 09:12

  If it is during the "generation and debugging" you can also access the console output via view-> "Embedded Web Server Output".

• can I manually add a workout to the application of the activity (e.g. swimming when I'm not wearing the watch)

  Can I manually add a workout (such as swimming when I don't wear the watch) to the application of the activity?

  Hello

  It is not possible to add workouts directly in the implementation of the activity.

  Health and fitness data Apple Watch, iPhone and any other source are rather grouped by health on your iPhone app. Combined data is reflected in the application of health dashboard, which adjusts the results to avoid any double counting of data from different sources.

  To add a workout:

  -On your iPhone, in the application of health (icon: red heart on a white background), go to: data on health (tab) > Fitness > training > tap Add a data Point > enter the result of your workout.

• Record significantly delays the start of the application registered

  Hi all the

  I have the demo version of Captivate 4 and I bought the real version. I can't support until I have save the product, but given its cost, I want to assure you that Captivate works the way I need it.

  I am trying to record the screen of an application of 1280 x 1024. Other products seem to have no problems, especially of Camtasia. When I use Captivate, it delays considerably the 10 original of the request-20times, is almost unusable. I don't know if it's my fault. I use lots of movement, the application updates automatically screen, and I need to capture these updates requiring no input or the user's mouse movements. I don't care if the file is very important.

  Any Suggestions?

  Doug

  Hi Doug

  If there is anything I've learned in life, it's nothing but honesty. So I'm going to be honest here.

  I eagerly using Captivate, but so full of movement, that's what you're after, Camtasia is unquestionably the superior product and you'll probably be much happier using it. Complete movement with Captivate has come a long way from where it once was, but Camtasia is King when it comes to full motion capture.

  Sometimes I enregistrer record with Camtasia, then mix it with Captivate by dropping what I recorded in a Captivate slide.

  Personally, my vote is to have both applications in my quiver. Then recognize the combinations strong each and each use as appropriate. I compare this to the saw, that I might have in my garage. All saws cut wood. But a saw runs circles around a table saw for accurate angle cuts. Similarly, nothing is comparable to a table saw to rip directly to the long sections.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• my Apple Watch does not record the data of my activity on my iPhone. The application of the activity is implemented on my watch and twinned with phone and not yet to record data.

  my Apple Watch does not record the data of my activity on my iPhone. The application of the activity is implemented on my watch and twinned with phone and not yet to record data.

  HI - try the following steps:

  On your iPhone close application of activity and also, if it runs in the background, the health app (you can close open apps, including the app shows):

  -Double-click the Home button, and then drag upward on each of the app previews to close.

  It can help to restart your iPhone and your watch. Turn on both devices off the power together first, and then restart your iPhone before restarting your watch:

  -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;

  -To switch on: press and hold the side button until you see the Apple logo.

  If this does not resolve the problem, try next disconnect and rematching of your watch:

  -L'app shows on your iPhone shows backups automatically, including a new when the unpairing via the application.

  -Choose to restore the watch (backup restore) when provided the opportunity during the whole.

  -Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).

  - Pairing your Apple Watch and Support Apple - iPhone

  - Set up your Apple Watch - Apple Support

• Error message: the application has failed to start because its side-by-side configuration is incorrect and can not enter in the email and save records

  I get a message that says that the application has failed to start because its side-by-side configuration is incorrect. Check the log of events applications for more details.   I used this link to email for 2 years and NOW I can't in my email and all my saved folders.

  Hi KathyHendges,

  1. What mail client do you use?

  Step 1:

  You can try clicking with the right button on the link and select run as administrator and check.

  Step 2:

  This error code can occur due to corrupted Microsoft Visual c++ installation.

  To resolve this problem, you can install the latest version of visual C++ according to the version of Windows installed on your computer (32-bit or 64-bit) and check:

  Download and install Microsoft visual C++ from the below mentioned link:

  Package redistributable Microsoft Visual C++ 2010 (x 86)

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=a7b7a05e-6de6-4D3A-A423-37bf0912db84&displaylang=en

  Package redistributable Microsoft Visual C++ 2010 (x 64)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd512d9e-43c8-4655-81bf-9350143d5867

  For more information, you can consult the following link:

  http://blogs.msdn.com/b/developingfordynamicsgp/archive/2010/08/20/side-by-side-configuration-is-incorrect-error-message-given-launching-Dynamics-GP.aspx

  Hope this information is useful.

• Failed to load existing records from the database on SD card during initialization of the application

  When the Simulator is launched upward, not able to load existing records from the database in the Inbox, so no records appear in the Inbox even though they exist in the database. It seems to be a problem with the SD card in the Simulator - the file system for the SD card is not correctly initialized when the application starts first to the top. During initialization of the application tries to access the SD card by using the following code.

  Boolean

  sdCardPresent = false;

  Enumeration e = FileSystemRegistry.listRoots ();

  If

  (e! = null) { }

  While (e.hasMoreElements ()) {}

  root = (String) e.nextElement ();

  If

  (root.equalsIgnoreCase("SDCard/")) {

  sdCardPresent =

  true;

  }

  }

  }

  sdCardPresent is always set to false and was not able to access existing records from the database. Once the application is initialized and try to create the database, the database is created successfully on the SD card.  The code is the same as above when creating the database and was able to do sdCardPresent = true.

  Is there anyway to register or add the SD card during initialization of the application or any property as System.setProperty overide the path of the default directory value?

  I use BlackBerry 9550 Simulator. I checked the "file system using PC for files from the SD card" and I use "C:\bb\SDCard" for the file system of thr.

  Also tested on the BlackBerry and found the same thing, if the device is hard reset, then it not reading the SD card as well.

  Mark the thread as solved then.

• recording programmed with BPA on the client sample application

  I'm trying to register my device (example of customer installed app) and I'm trying to register and unregister...

  Unfortunately, when I submit my credentials and try to register with BPA, I got:

  java.lang.Exception: registration rejected by BPA

  I have had this on the application log:

  Rc = 200 HTTP response

  Recording programmed with BPA

  Push the status API callback: failure

  Command 'register' failed with the error: java.lang.Exception: recording with BPA has been rejected by the server

  It happens more often...

  What do I have to wait until the BPA accepts my registration? How long is it?

  I don't get what want to be...

  in my BB Debug Portal my device shown as being ACTIVE but in PPG UNSUBSCIRBE

  I use this BPA URL: http://pushapi.eval.blackberry.com

  should we build a Manager to solved this problem if want to build push own app, which is an easy to use?

  Well, the problem is already solved...

  I try to record using HttpConnection BPA and it still works and I got the answer correctly...

  In the sample application customer it use the API to push record and especially it did not work (do not register correctly)...

  may I suggest to those who are faced with the problem of sam me... you can try the simplified BIS press http://supportforums.blackberry.com/t5/BlackBerry-Push-Development/Simplified-BIS-Push-client-sample...

  It works very well on me!