Upgrade memory [2410-504]

Similar Questions

• HDD upgrade options for Satellite 2410-504

  Hello

  I am looking to upgrade the HARD drive on my 2410-504 but have found no information on what limitations there are on a HARD drive more large size.

  The thread by Sherlock for the upgrade of 2410-404 suggests a load up to 60 GB capacity, but the user for the 504 manual says it was only produced in 20 and 30 GB packages.

  Anyone know what is the largest capacity HARD drive that can be placed in a 504 and who will always be recognized by BIOS, etc?

  Thanks in advance

  Pete

  Post edited by: pete.o

  Hello Pete

  This information can give you the right Service partner of Toshiba (responsible for the hardware upgrade) or an independent hardware vendor.
  I can imagine that 60 GB HARD drive should not be problem, but with more than that can cause HARD drive is not recognized correctly.

  Call them and ask. Ask doesn? t cost a lot.

• Satellite 2410-504 does not start after you remove RAM module

  Hello

  I need assistance or advice.

  I have a portable Satellite 2410-504 and I was looking for to increase the memory, I am a Novice with computers, I decided to remove the Module that is already in place (to see if I was capable of employment)

  After removing and then returning the Module, then I went to turn on the laptop and Yes you guessed it, NOTHING!
  The power lights are on and the light comes on but the screen is blank and there are no hard disk activity.

  Now, trying to get back on my actions, I have been unable to completely remove the battery but I'm sure that he slipped on the connectors.
  Could I have caused permanent damage or are my actions retreivable.

  Thanks in advance,

  Mike-c

  Hello

  Did you check if the RAM has been inserted correctly?
  Select this check box.
  But of course, the RAM could be damage due to wrong treatment nothing is impossible
  My computer laptop didn t start because one of the RAM died suddenly.

  What you could do is to remove the battery and unplug the AC adapter.
  Then you have to wait a little (one hour) and need to connect the two parts again.
  Then try turning on the laptop computer.

• Support of Satellite 2410 - 504 USB start?

  I have a very old Toshiba Satellite 2410-504, who came out and bought in 2001/02.

  Am curious to know if anyone knows it is possible to start USB in the present?
  I have the USB stick, but cannot boot from it.

  Perhaps, it only supports USB 2.0 etc.
  Am not sure.

  It's very old laptop model

  From my experience this old notebook series couldn't boot from a USB flash memory.
  Some of the series supported the start player USB FFD (it s a reader who took in charge of the diskette.) Maybe you remember ;-))

  However, I'm quite sure that the BIOS does not support the boot from USB flash memory stick

• What is the best way to get wireless on the Satellite 2410-504?

  Hi guys,.

  I hope someone can help... I have a Satellite 2410-504 which is almost 4 years old pretty good spec for the moment. I thought it had wireless built in... There on / off switch and seeing, but I can't find it in the Device Manager... by removing undercover for the wireless, it is empty... I bought a Belkin cable NTL cable router... what would be the best option to make it wireless or is it already... someone could advise.

  Scott

  [Edited by: admin January 22 06 21:38]

  Hello

  As far as I know that the wireless card is optional on this unit. This means that you can upgrade your laptop computer with the Mini-PCI Wireless card that you can put in the slot wireless.

  You can use these maps:
  Wireless LAN Mini PCI Card (2, 4 GHz, 802. 11a / b) PA3273U-1MPC
  Wireless LAN Mini PCI Card (2, 4 GHz, 802 11 b) PA3212U-1MPC

  Good bye

• Upgrade memory on an all in a single LX830

  I may upgrade the 4 GB provided to meet the requirements of the program. Additional memory needs to be installed in pairs? The existing 4 GB occupies a dwelling, can I mount 8 GB in another location or it will be incompatible?

  Well, mainly upgrade memory depends on the support of the chipset/CPU.

  Not quite sure what computer Toshiba LX830 do you have exactly but as far as I know the L830 all in one units would support up to 16 GB of RAM.

  A property used by a 4 GB RAM module and housing is free.
  This is why it must be able to use another additional module of 8 GB RAM.

  But of course, another module of 8 GB RAM should be compatible with the current 4 GB of RAM.
  Otherwise, you will get some compatibility issues

• Upgrade memory on NB300-108

  Looking to upgrade the RAM to 2 GB on my NB300-108

  Have you looked at the website of Toshiba and the cost, but there seems to be a plethora of alternative sites with upgrades memory compatible when I put in the part number.

  Would like to receive experiences in the forum about alternatives etc.

  Thank you

  Hello

  The laptop supports DDR2 800 MHz SO-DIMM or PC2-5300 (DDR2 667 Mhz) modules.
  These modules are provided by different companies.
  There are good quality modules and less quality modules

  Of course, you can choose and buy the cheapest, but in this case, you use the risk of compatibility problems.

  I made good experiences with RAM from Kingston. These are of good quality and not too expensive modules

• Upgrading memory on the NB550D - 11 d - 4 GB of RAM are possible

  To anyone who thinks of a memory upgrade on the NB550D:

  The NB550D supports up to 4 GB of memory, not only 2 GB as mentioned by Toshiba in their specifications.
  Upgrade memory to 2 GB is _only limited_ by the pre installed Windows 7 Starter OS, and not by the netbook itself.

  I use Linux Mint 11 Katya, 64-bit and my system works perfectly well with a 4 GB ram module. If you want to use the full support for 4 GB ram, get rid of the Win 7 Starter operating system.

  Specifications for more memory ram volume are DDR3 1333 MHz PC3-10600 SO-Dimm. I chose a 4 GB of Corsair module, because of the guarantee of 30 years of offers from Corsair.

  It took me a while to find this out hope, that this will be a help to all those who are just as secure as I was how to upgrade memory NB550D. Good luck. (o).

  Thanks for the comments

  Also it of important to mention than the 32-bit systems (not serious if its Linux or Windows) would recognize only 3.2 GB since it is a limitation of 32-bit
  So to use all of the 4 GB RAM 64-bit system is required.

• Question about upgrading memory Satellite M55-S1001

  can you please recommend what to do? I want to make my satellite m55-s1001 run faster please let me know, what do you recommend: 512 MB or 1 GB of memory? I'm not familiar with updates so please help!

  Hello

  First of all, if you want to go for fastest laptop, you should start with simple things.
  Try to defragment the disk, turn off the background process is not necessary, etc.
  Upgrade memory will the powerful laptop and of course a lot more quickly.

  To my knowledge the Satellite M55 should support the bars of memory 2 x 1024MB, and I also recommend the use of 1024MB instead of 512 MB module.

• I have iMac 5 k mid 2015 upgrading memory

  How to upgrade memory on iMac 5 k mid 2015 10.11.3 el capitan bones of 27 inches

  Installation video are visible by clicking on

  http://eShop.MacSales.com/installvideos/iMac-27-inch-5K-late-2015-memory/

• Satellite L50 - A - 1 5 PSKK6E does not start after upgrading memory

  Upgrade memory L50 - A - 1 5 pskk6e

  I have a memory ddr3 4 gb 1rx8 pc3 - 12800 S-11-12-b2 hynix and I tried to add another memory
  memory DDR3 4 gb 1rx8 hynix pc3 - 12800 S-11-11-b2, but it does not boot up the laptop.

  I tried to mount only the new but it won't start.

  Some ideas?

  I think that it s you already know that this Satellite L50 - has - 1 5 would support max 16 GB of RAM (2 x 8 GB)

  But why, box for computer laptop doesn t is very simple: the new modules are not compatible.

  I found modules recommended by Toshiba.
  These are:
  8GB DDR3L - 1600 PA5104U-1M8G
  4 GB DDR3L - 1600 PA5104U-1M4G

  Both are made of Kingston and the specifications are:

  Memory speed: 1600 Mhz PC3-12800
  Capacity: 8 GB (1x8GB module)
  Pins: 204 SODIMM
  Type of RAM: DDR3 SODIMM
  Verifying the integrity of data: non ECC
  Specifications:
  Latency (CL) CASES: 11
  Voltage: 1.35v

• Satellite 2410-504-driver Windows 2000 network missing

  Where can I ask for Toshiba create a network of Windows 2000 for my PC driver laptop Toshiba 2410-504? As you can see, Toshiba 2410-504 has drivers for the two 2000 & XP. If I install XP then I get everything works perfectly. If I install 2000 then I get everything works perfectly but the network card. Somehow the Intel PRO network adapter is not detected...

  You are right. LAN driver is not available for download, and I presume that driver LAN should not be installed separately. I found the info that this Satellite is supported for W2000 SP3. This means that this book must be installed with the W2000 SP3 to have all the features.

  Which SP is preinstalled on your laptop?

• Which series is the Satellite 2410-504

  I'm trying to Flash the Bios on this laptop, but don't know which series or model it is.

  It says S2410-504 under him.

  Hello

  The S2410-504 means Satellite 2410-504 and this laptop seems to belong to the series of PS241E.

  The European Toshiba page should provide some drivers and also the BIOS for this series.

  I found it in the * Archive Satellite Archive Satellite 24xx Satellite 2410-504 PS241E *.

  Check it out man

  Good bye

• Upgrade memory for Satellite 2800 400

  I am trying to upgrade my ram to 128 on the laptop. After following the instructions for the instillation, that I turned the laptop on to find that it was slower than before and that the new ram had not registered as 128, and always thought it was 64 in someone can help me solve this ir is there anything I can do?

  Hi Ben

  Maybe you used the memory modules bad.
  As far as I know that you can upgrade memory for max 192 MB
  The 64 MB has been installed in an internal memory and cannot be deleted.

  I found these compatible modules:
  PA3003U - 1 M 03 32 MB
  PS3004U - 1 M 06 64 MB
  PS3005U - 1 M 12 128 MB

• Upgrade memory for Equium L20-264

  Hello

  I have an Equium L20-264, which is "dying" and advised to upgrade memory. Specs below.

  Equium L20 - 264 part number: key features PSL2ZE-00500CAV - Numtxpackets® Celerona® M processor 360
  -Windows® XP Home Edition
  -60 GB hard drive
  -256 MB DDR2 RAM
  -15 "TFT color display
  -Drive DVD Super Multi (Double Layer)

  Issues related to the:

  1. How can I remove the existing memory? Is there a guide of the user on this operation?

  2 How many slots have?

  3. What is the max memory per slot?

  4. can I buy Toshiba memory directly?

  It is rather urgent and would like a quick answer.

  Thanks in advance
  Rag99

  Hi mate.

  As far as I know your laptop supports two memory locations.
  They must be placed at the bottom of the unit.
  If you n t know how to change this then I recommend consulted the user manual!
  The manual can be downloaded from the Toshiba European page.
  I think that the laptop can be upgraded to 2 GB of RAM. So, you can use 1 GB of RAM in one slot.

  PS: you must use the RAM DDR2 PC2-4200 memory - 200pin modules