record of events

Similar Questions

• Since 10.11 I have not been able to download via the usb port of my Davis Vantage weather station. No solution of tech Davis on the issue even with the new recorder of events in the resort. Is there a problem with the usb?

  Since 10.11 I have not been able to download via the usb port of my Davis Vantage weather station. No solution of tech Davis on the issue even with the new recorder of events in the resort. Is there a problem with the usb?

  What Mac? (details)

• Windows Error Reporting service stopped recording of events in the event log, and now when it spawns werfault.exe, the process consumes the CPU until he is killed.

  Windows error reporting service ceased to record events in the event viewer. The last successful entry was 26/03/2010. Since then whenever the service generates Werfault.exe to handle the error, the process seems stuck in a loop of consumer processor, but do nothing. It uses 99% of CPU (80% preferred), is not e/s and number of handles, thread, & working set do not develop.

  Three Windows updates were installed in shortly after the last successful log entry (automatic update is enabled):

  KB915597 def 1.79.702.0 & def 1.79.495.0 both for Windows Defender

  KB980182 for IE 7

  I think that my system is clean, at least Spyware Doctor think it is. I also did some tests Ad-Aware. Windows Defender analyzes every day without error.

  Has anyone else encountered this problem?

  Hi Wannknow,

  It's good information - and thanks for the thanks! You really only need to run an adware or virus (malware) program at the same time. What I would recommend is that you choose an adware program - either "Windows Defender" or "spyware doctor" and disable the other. This can be your root problem, so at this point I turn back on 'report of problems and solutions' and see if you experience the same problem:

  Again, here are the instructions:

  1. open Control Panel. (Press Ctrl-ESC and type 'control' is faster access method).

  2. click on "System and Maintenance" and then click "problem reports and solution."

  3. click on change settings in the left panel of the problem reports and Solutions window.

  4. Select Advanced settings.  In the "for my programs, problem report is: ' select 'off '. Click on CLOSE the

  Hope this helps,

  Steve <> Microsoft partner

• Recording Live event on FMS

  I have the same problem of SGF and F4V format.

  I want to archive the event live at the same time and do I record live in F4V format on the onPublish event.

  It comes to main.asc codes:

  [code]

  fragments of live stream

  var = Stream.Publish liveStream ("f4f:" + streamName.name);

  liveStream.record ();

  liveStream.play (streamName,-1, -1);

  Create archives (f4v) for on demand

  var vodFile = Stream.Publish ("mp4:" + StreamName.name + ".f4v");

  vodFile.record ();

  vodFile.play (streamName,-1, -1);

  [code]

  So when I use the h264 in my event source when the FMS create f4v, F4V file 320 kb (f4v is not growing) and save only 5 seconds of my event anyone my event online is more than an hour.

  But when I'm not using h264 if source my F4V file is correct and record videos 1 hour of the live event.

  I don't know what is a problem

  I use 5 FMS extended edition and FFMPEG for webcam feed to the FMS

  This is my code FFMPEG:

  [code]

  ffmpeg f dshow video-i = "A4TECH USB2.0 PC Camera" - vcodec libx264 - b: v 32 k - acodec libmp3lame b: a 64 k - ar 44100 f flv rtmp://12.11.1.3/livepkgr/liveevent?adbe-live-event=liveevent

  [code]

  Please advise me to solve this problem.

  Thank you very much.

  Solve above problem with the FFMPEG edit syntax.

  [code]

  ffmpeg y f dshow s 640 * 480 video-i = "A4TECH PC Camera USB2.0": audio = "Microphone (Creative SB Audigy 2 ZS (WDM)" - c: v libx264 - b: v 120 k-pix_fmt yuv420p - vb 450 - a - map 0:0 - acodec libmp3lame b: a 64 k - ar 44100 f flv rtmp://12.11.1.3/livepkgr/Liveevent?adbe-live-event=Liveevent

  [code]

• Record events and queues

  Hello

  I'm building a user / view / acquisition program and to have dufficulties with all, register for the event stuff. I have attached a simple model to show what is happening:

  I want to order 2 while loops with external events to a user while loop. But when I press quit, most of the time, it will close the 3 loops but it sometimes leaves a performer? Also, I need to control the playback and stop, but sometimes it raises an event to one of the loops.

  I think it has to do with the queues, they expect something. This is derived from a structure of consumption of the user (it is a summary (dummy file)).

  Best regards

  Thijs

  

  Hey Taylor,

  Attached, are two examples. "mod 1" use 3 loops of event like your version.

  "mod 2" simplifies the recording of loop file (would work for you if this loop is that save data).

  There is an important caveat with the user and timeout events:

  "Any event user logged in to register for events function resets the timeout timer when tire."

  (Even if there is no way configured to use user event.) »

  For example:

  If there was a user event occurring every 100ms and you introduced a 500 ms delay - your timeout would never happen.

  This isn't a problem with this example, but it is good to know about your program grows.

  One way to limit the impact is to record only events that will be used for a particular loop.

  Another way is to use a separate timed loop to generate a time-out of user event.

  Steve

• Record regarding Wifi equipment and activities of the events?

  One of my friends has a lpatop which has wifi intermittend failure. It works fine then suddenly loses the connection to the hotspot, can not connect for 2 min and then reconnects on its own. Mainly, it happens under load but happen also when idle.

  Can I set up a logging action that will record all events related to the Wi - Fi card, so I don't know what is happening when the card disconnects?

  Hi Ruscik,

  You can use the Windows Network Diagnostics event logs to track events without wire.

  Using event logs Windows Network Diagnostics to solve network problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-Windows-Network-Diagnostics-event-logs-to-solve-network-problems

   

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

   

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Events shown in the range of navigation when you view the properties of the system for recording of JFR

  Which record the events shown in the range of navigation when you view the Properties tab system for a Java flight recorder? I'm guessing that they mark the time for JFR's writing of the events on the disk.

  I ask because, during the capture of a lot of information with the help of JFR, we see two effects that correlate with these events: (1) CPU usage ramps up a little bit between an event and the back then, level departure after each event, even if the application workload is constant; (2) the clock used to time stamp on all the events THAT JFR capture high-resolution seems to run more slowly in the period following immediately each of these events, perhaps for the period while JFR is written to disk. The slowdown of the clock appears as an increase in the rate of events shown in the range of navigation in other tabs - I also analyzed the events selected out of the original EN file to check their apparent rate.

  I see this on Java EE applications running on JBoss EAP 6.x on Java 7 on machines virtual small vSphere.

  The events shown in the navigotor range in any time must appear at the same time they are created. not when they are written to disk which can be a little later, depending on the settings.

  In the System Properties tab, you generally see a single spike per segment in your record. You should see the same thing if you go to the tabgroup events and enable only the Java Virtual Machine system property / Initial if Types discovered.

  As for the damages of its use and CPU timestamp, it sounds interesting.

  What exact version of Java 7 you use, there would be some bug fixes in later versions.

• keyboard events in the training record

  Hi all

  How is it possible to record the events of keyboard such as Ctrl + Z for undo and Shift + click to select multiple items in the training mode.

  Users must do this action countinue slides.

  that you enjoy.

  Hello

  If you save in training mode, then by default that Captivate should include on boxes in your slides. You can assign keyboard shortcuts to those click boxes by performing the following steps:

  1 double-click on one of your click boxes.

  2. in the section click on area of the dialog box click on the Select keys... button.

  3. Select join a shortcut

  4. to make a cancellation select Ctrl and then in the menu of the letter

  Note: To get to the learner to shift + click, select the UPDATE option

  5. click OK to close the shortcut dialog box.

  To simulate a cancellation, you must then create a branch to a slide where the initial action was performed. Here, you can use options of success we go to the previous slide or move to the slide and then specify the number of the slide.

  In regard to simulating it to select multiple items, yet once would perform you similar steps. Depends on how your project has been set up you must either define the action of success we continue or go to the next slide.

  The way I tend to work, I got each element I want to select on separate slides and add a click with the attached UPDATE keyboard shortcut box. When the learner clicks on the first click box I then move to the next slide and so on. Of course, this does not account for to the learner to choose items randomly. To accomplish this, you will need to set up a fairly complex branching.

  HTH

  Best - Mark

  Visit blog macrofireball

• I can't save the events to the calendar

  I have some problems with my 5 c with ios 9.3.5 iphones. The first is the calendar application. When I try to record an event, after you complete all the content and select Add, the event does not appear on my calendar. The second problem is with the backup. The phone never complete the backup process.

  The last problem was with the screen. Constantly, I have to restart my phone because the screen looks like that the images do not match the screen. I can't unlock the screen and do nothing. I try to take a screenshot to it attached to this message, but the image seems normal.

  Please can someone tell me what I need to do?

  Since you've already tried resets, try a restore.

  Reset: hold the Home and Power buttons until you see the logo Apple (10-15 seconds).

  Restore your iDevice: https://support.apple.com/en-us/HT204184

  If your backup is in iTunes, make sure that it is encrypted.

  The latest issue can be a wandering selection in settings > general > accessibility > Zoom.

• Can you record videos in FaceTime

  I have a model MD511LL/A 32 GB iPad. I want to FaceTime with someone who can't attend an event, yet I would like to record this event. Is this possible?

  Not in the app, no. Old school, aim a camera at the screen or watch in some other video chat app that could allow recording.

• migration of events imovie to new Mac without using the Migration Wizard

  Hello

  I want to do the following:

  Migrate from iMovie events of an old MacBook Pro (10.6.8 Snow Leopard) created using iMovie ' 08

  TO

  (Yosemite 10.10.5) iMac with iMovie 10.1.1

  All events are stored on 3 external drives (Nothing on the internal drive of MBP). Disks have FireWire interfaces, I can't connect them directly to the iMac.

  The destination is another external drive, with Thunderbolt interface. I copied the serious events in 3 separate directories, but not tried opening them with iMovie. Wasn't sure if there was data stored elsewhere (in ~/Library for example) that might be needed; In addition, I didn't know if I could manually merge the 3 separate records events iMovie with the Finder, or need to do somehow with iMovie.

  I manually moved everything some time ago - I haven't used Wizard migration; I didn't have enough disk space attached to the iMac when I moved everything, so I carried on using iMovie on the old MBP.

  I googled and read several articles on the events to an external drive / to new Mac, but none of them totally covers my starting position and desired end result.

  Would appreciate any insight how to go on this issue, and how and where exactly iMovie keeps all the data you need.

  The articles are (among others):

  https://support.Apple.com/en-us/HT202853 "update of projects and events from previous versions of iMovie in iMovie (2014).

  http://help.Apple.com/iMovie/#mov3ac6d42c "copy or move a video in your library of events to an external hard drive.

  https://support.Apple.com/kb/PH2302 "iMovie 11: copy or move video from your library of events to an external hard drive.

  https://support.Apple.com/en-us/HT203049 "move your iMovie for Mac library (2014).

  If your iMovie ' 08 projects contain media from outside the record of events (for example, from iPhoto or iTunes) then we must first using iMovie ' 08 on your old computer to "consolidate" your support so that everything is copied in the events folder.  Details for the iMovie 11 version can be found at: http://help.apple.com/imovie/#mov3ac6c7c9

  I don't have the ' 08 version help files, but I think it will be the same - you can check with your old Mac.

  "Disks have FireWire interfaces, I can't connect them directly to the iMac.

  FireWire adapters Thunderbolt are available for about € 30, which would use these drives on your new Mac.

  In fact, you can copy the project files and events with the viewfinder of an old external drive to the root level of the new new external drive (which should be Apple - formatted), but it is probably best to do from in iMovie ' 08, as described in the help of Apple.   Do 'copy' and not 'move' - this way you always have a backup of the original on the old disks in case of problems.

  I would like to convert the project files and the events of each of the 3 discs one at a time, creating 3 libraries separate iMovie 10.1.1.  You can always rearrange these in iMovie 10 after you have everything updated and verified.  Some people have reported the update of blocking process at any given time, so update in small batches of events and projects is much better than trying to do everything at the same time.

  In fact I would try to first simply copy one (or a small group) project and its events associated with the new external with iMovie ' 08 HD then update to ensure that it will work - from iMovie ' 08 for iMovie 10.1.1 is a big jump.

  Good luck!

  Geoff.

• Table of clusters with graph - scale change event Y

  Hello everyone

  I have an array of Clusters with a graphic within each cluster. I need raise an event when the user, type a new value to the scale of the graphs Y and press "Enter" to apply the change. Any ideas how to trigger that?

  I am not considering event 'mouse enter' because I have other events related to that already.

  Thank you

  Dan07

  Given that the graph is in a table, you must dynamically record the event of change of scale. Typical static records are not allowed for the elements of the array, and it is not a good reason why they cannot be admitted, that's why I created an idea for allow static event registration of items in the array. I hope you go to the exchange of ideas and vote for this idea.

  

• Static vs dynamic events - dynamic events are empty

  During the implementation of my project, I used static events to manage the interface. The Structures of the event separated while loops in the same vi.

  I changed the architecture to make code modular and I use dynamic events. Dynamic events are captured in separate subVIs event Structures. I spend the references to the controls in the subVIs that have Structures of the event and I record the events of the references.

  Static events had no problem.

  With the dynamic events, I see that some events are not consumed. Instead, I see the event inspector window a few times an event is 'empty '. This means that the button should be pressed again.

  I am attaching two examples of projects that have exactly the same functionality.

  The testDemo2 uses dynamic events.

  The testDemo4 uses static events.

  How much detail I miss the dynamic architecture events leading to lose some events?

  This UI code is crizazy. It is difficult to really say what is happening, but you have a Unregister for events VI after the structure of your event to during each single loop and then re-register at the beginning of each loop. Empty all dynamic events currently in the queue and then re-registered again.

  You must only register events, only once and cancel the registration at the end of the application.

  What you do isn't really very modular. Even if you add a new event/control, you still he wire through the Subvi references and register, so you're not really save any time. There is nothing wrong with having a static event for your UI record. What you want probably is an architecture of messages in queue manager, where your static user interface events create messages that are sent to a loop of consumer to manage.

• [LV2013] Command events (mouse leaning against modified value)?

  Hello

  I met a problem with my UI behave in real time.

  The mechanism of distribution of events records several events

  related to the different user interface controls.

  Two of them are defined as:

  Control string: modified value

  Tree control: mouse down

  The problem is that the chain control is used to display

  and change the values in the tree. Click on an item, its name is

  displayed in the control of the channel, change the channel control, the

  new value appears in the tree control.

  The question is when I change a string inside the string control and

  Click another item in the Tree control, is the first event fired

  the mouse resting on the tree control event. Then only the

  Value change event is triggered.

  What happens is that the case is under the direction of the string value

  control gets overwritten with the new value of the clicked element.

  Then it is saved within the value of the previous item.

  Is there a way to give some sort of priority on certain events

  rather than others?

  David Koch

  
  

• event structure vs case structure

  I am developing LabVIEW: tool of control and vision. Front Panel has a lot of buttons, each button will execute a single or a group of the screws.

  I found that:

  1. event structure is good for digital change. i.e. the user change a corordinate and motors are moved.

  2. the structure cases is suitbale where such that use click "run MTF", a case structure is executed to calculate MTF.

  I tried to use the structured event to pick up button click but it isn't reliable workign, such as the user clicks too quickly and LabVIEW does not record events or LabVIEW records the event even twice

  However, I have a number of clicks functional structures. My block diagram will be uncontrollable.

  Any idea/tip/trick be greatly appreciate!

  -best

  If you understand how LabVIEW works and understand the principle of data flow, what I'm going to say the will of sense.

  The idea of a Structure of the event, it's that he's sitting there, don't take no time CPU until an event (usually a change in a Front Panel control) takes place.  Then he does everything you ask in its event arguments.  The trick is to do almost nothing in the structure of the event, but to say another loop, running in parallel, to do something.

  The key here idea is you have two loops, running in parallel, independently, at their own pace.  One, the event loop, waiting for an 'event '.  When it happens it it "sends a message" to another loop (or loops) that make treatment (which may take some time) as defined by the event loop.  The point is that it is very fast to send him the message (which is usually done via a queue), so the event loop is able to respond much more quickly that the user can push buttons on a façade.

  However, when the hands of loop event off the Message 'go do this task' another loop, the task may take longer.  If the tasks are put in a queue and then they get finished, the next task is running.  The key thing here is that the two loops, the loop «Ask» (events) and the loop ' Do ', run indepedently and at their own speed, nor dependent on the other.

  Bob Schor