Recording on Satellite Pro P200

Similar Questions

• Satellite Pro P200-15W: after Bios Update 1.90 incredibly noisy fan

  Hi, I have a Toshiba Satellite Pro P200-15W, I recently made an update to BIOS version 1.9 and seems to have been a big mistake.
  After restarting the computer, I had a lot of software deconfig and the fan has become incredibly noisy.

  I have the problem with the Toshiba Vista registration software, I get this message: "registration of Vista has stopped working". I read other discussions, I don't want to just disable it in the start.ini file, I would actually solve the problem if there is a way.

  Is there a way to change the configuration of fans? I read a post from Toshiba on another model of laptop that has had the same problem of noisy fans after an update of the BIOS, they gave that a solution with a new version of the BIOS, is there a way to reverse the BIOS to the previous version? (recovery CD will be useful for this purpose)?

  See you soon

  Edgard

  Hello

  It seems that the picture of the fan was changed and renewed in the new version of BIOS, and so fans run fall.
  Why the table fan has been changed?

  Well, usually something like this is necessary to improve the reduction of the internal temperature while the CPU and GPU are running with maximum performance.
  This helps to prevent the equipment from damage!

  Usually, the recovery CD formats the whole HARD drive (partitions too) and installs only the image of Toshiba on the notebooks of HARD drive.
  The image contains the OS, drivers and additional software and has nothing to do with the BIOS update.
  But you can try to recover the laptop to see if you can solve the problems of software as "Vista record"!

  If you want to reverse the BIOS, you will need to contact the ASP in your country!

  Sorry, but all I can suggest.

  Best regards

• Problems after updating the BIOS on Satellite Pro P200

  I recently buy a Satellite Pro P200 running Windows Vista Business. Yesterday, I updated the BIOS to the version 1.50 supplied with the machine to 1.80 available on the Toshiba site. I double checked that I was using BIOS correct update for the Pro P200 Satellitel running Vista.

  After updating the BIOS, I have now two problems:

  1. whenever I start and join the office, I get an error message "record of Vista has stopped working". This problem has been identified as toshibavistaregistration.exe here: [link: http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=99805]

  2 Control Panel > system now shows the processor and the memory (RAM) as "not available". Execution of the diagnostic PC Toshoba tool and looking at basic information show also no information on the memory (RAM) Although the processor information here. There may be pieces others missing too under the eyes of list shorter than before the update of the BIOS.

  Basically, I want to get everything working again as it should, but cannot find any information on these issues.

  After further review, it appears that the update of the BIOS is not the cause of the problems.

  Immediately after updating the BIOS, I had a major system crash. It turns out that this is what has caused problems.

  After a system restore to a point before the update of the BIOS and the major system crash, now everything is working again with BIOS version 1.8 in place.

• Satellite Pro P200: Cannot install Server 2003 - parity memory error

  I have a Satellite Pro P200 and to the work required to install Windows 2003 server on it, but all I get is an error message:

  -Hardware malfunction

  Call your provider of support material

  NMI: Parity check / memory parity error

  -The system is shut down

  I checked the memory and everything seems OK. Vista runs very well on it, and all memory is recognized. I tried different flavors of Server 2003, although all I need is standard edition. Anyone who has met this problem, or someone has any suspicion as to how I can get it operational.

  So, how tested the RAM? With Memtest? Or Prime95?

  I read in many forums that people work servers (no laptop...) SERVERS) that correctly work 1 year with ECC memory, then windows 2003 server gives the same error message you have.

  I mean if Vista works flawlessly and you checked as you say the RAM while there could be a mismatch which must not be for lack of toshibas.
  Maybe you should try a linux ubuntu server edition, which works great on almost * ALL * systems, even on systems with faulty CPU/memory (Ok, ok, not 100%, but it works, I got this case :))

  So, maybe you can try to exchange the RAM, but if you're still the same error then ask microsoft or try another P200, if they are available.

  Sorry dude, but I Don t have a lot of ideas in your situation :/

  Welcome them

• Satellite Pro P200-150 - where to find drivers for Win 7

  I have a PC Satellite Pro P200-150 with Vista Business bought in 10/2007.
  I want to change the hard drive 250 GB, I want to take this opportunity to pass on Windows 7 Home Premium Version.
  I'll buy a load of DVD.

  My question is: How can I get the drivers, but especially utilities Toshiba?
  On sites that I've explored I find driver downloads but no public services.

  Thank you for your response.

  Hello

  Check the Satellite Pro P200 driver download area.
  You will find all the drivers Win 7.

  Note: the P200 is a little older series you must choose in the Archive of the Type of product to get the drivers

• 2nd hard drive in Satellite Pro P200

  Hello world

  I have a Satellite Pro P200.
  Anyone know where I can get an advance and a shopping cart to install a 2nd hard drive?

  As far as I know your laptop can be improved with the second HARD disk if the SATA connector is available.
  When you remove the HARD drive to the second HDD can you see it or not?

  I have the Satellite P200D with place for second HARD drive, but there is no connector HDD SATA upgrade is not possible.

• Satellite Pro P200 - 17 c: Win XP won't load - installation of the SATA driver

  Hello

  I have a satellite pro p200 - 17 c I've had good years, allways worked without any problem.

  Last week when I booted the laptop, windows won't load and I find myself safe mode selection screen. No options whatsoever me to windows loading, I tried F8 and still nothing.

  I tried the restore cd that reimagee the drive but I get the same thing, I tried a new hard drive, once again the same.

  But if I try to load windows from an OEM to install that software does not because it is a sata drive and there is no floppy drive. I have an external floppy drive I use, but it is not known now.

  Any ideas or suggestions?

  Hello

  Go to BIOS and set it to default settings.

  In this case the SATA mode must be on AHCI. In this case the SATA drivers are required to install the Windows operating system. But as much as I know that Windows 7 already contains the SATA drivers if usually you don t had to add SATA drivers while OS installation the installation program.

  However, here is a nice HowTo document that helps you add SATA drivers for Win XP installation disc.

  + How to integrate a SATA AHCI driver into a Windows XP Setup CD.
  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

  + How to integrate the AHCI driver during the installation of Windows XP.
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

• SSD upgrade for Satellite Pro P200 (PSPB7A-01000J) - possible?

  Hello world

  I had a Satellite Pro P200 for 3 years and more. It came with Vista Business pre-installed, but I have successfully installed Windows 7 a few months ago.

  A few months ago, I replaced the C drive in my office with a Solid State Drive and now he sings - program start and loading of the system is much faster than before.

  Now I'm wondering if the SSD upgrade even could be done to my trusty P200 and if yes, what brand/model of SSD could be better. It should be 128 GB or 256 GB maybe.

  Anyone else been in this way? The results? Pitfalls?

  All responses appreciated.

  Thank you.

  Greg.

  Hello

  I think that it should be possible.
  You must use a SATA SSD drive since the laptop supports the SATA controller.
  To be honest, I never tried to upgrade the laptop with a SSD but SSD is not very different from the HARD drive and normally should not be a problem.
  In some cases, an update of the firmware of SSD may be necessary but usually these firmware updates should be available on the SSD drive manufacturer support page.

• Failure of the BIOS - Satellite Pro P200 - 16 c

  I installed Windows 7 64 bit on a laptop Satellite Pro P200 today. I then tried flashing the BIOS through windows with program Flash BIOS on Toshiba driver download page. I used the program flash for Vista because none is available for Windows 7. The program started and took a backup of my old version of BIOS and then Flash the BIOS. Then after a while an error occurred saying that this operating system was not supported.

  Alright. I restarted the computer and he was going to access the BIOS to see if the new version was done to install or not. But I can't access the BIOS now since the TI of suddenly password protected. I tried Google known standard Phoenix BIOS passwords, but they do not work. Now I've mistyped the password if often the computer won't let me even start without entering a correct password.

  How can I reset the BIOS? Should I open the laptop and remove the CMOS battery? Which will work?

  Help, please...

  Hello

  You used not compatible BIOS and it seems that module ROM BIOS was not flashed properly.
  Unfortunately, there is nothing to do but to contact the ASP of Toshiba in your country,
  Guys could remove the password and can reflash the BIOS using a traditional disk BIOS version and the crisis.

  > How can I reset the BIOS? Should I open the laptop and remove the CMOS battery? Which will work?
  No, remove the CMOS battery would not help because as far as I know that the CMOS battery is not removable on laptops just ASP can clear the BIOS password.

• Problems with multitasking on Satellite Pro P200

  I am the owner of a new Satellite Pro P200.
  I use this laptop to use software such as photoshop, indesign, etc.

  * Now I have problems with multitasking! *
  It is not possible to run 3 programs at the same time.
  That I have to restart my laptop again and again.

  Does anyone know what is the problem?
  Can someone help me with this problem?

  For two weeks I have P200D. I use it for work and use different applications at the same time. So far, everything is OK and I am very satisfied. Maybe you should try to optimize the operating system:
  -remove all software, you do not need
  -disable the startup of unnecessary software of automatic startup (MSCONFIG)
  -customize the appearance
  -information on the open performance and Control Panel tools and use tasks on the left side to improve the performance of computer s

  P200 is powerful enough and must be able to manage with a few applications running at the same time.

• Satellite Pro P200 won't start

  I have an old 1 week per Satellite Pro P200, it turns off when I was just in the start menu, so I was not doing something out of the norm (power cable is plugged). Since then it just won't turn.

  With the connected power cable I have an electric blue, power battery and light (although attempts to restart about 2 the battery light was red, but now blue). The drive light flashes for about 3 seconds each time I try to start and I can hear something happening inside the machine, but after only 3 seconds... nothing, completely dead.

  I tried to remove the battery, wait 20 minutes or more and none of it worked. Anyone have any ideas?

  Seems to be definitely a hardware problem... very bad :(
  Why you visit your dealer for new laptop and ask for Exchange.
  Maybe the dealer will exchange the laptop with a new.

  If this isn't the case, then you must contact the service provider authorized in your country for assistance.
  If you have purchased an extra service on the spot then the technician you will visit at home and will try to solve this problem.

  Good luck

• Satellite Pro P200 with WXP - two components without driver

  I installed XP Pro on my Satellite Pro P200 15W and I installed all the drivers on the driver download page, but I have still two components without driver: these devices, I don't know what types of devices are, because it seems that this medication works very well. The features are:

  Memory (Controladora de Memoria PCI) PCI controller
  Unknown device (unknown device)

  I aso installed upgrading Bios WIN5.00, but both devices still does not.

  Any idea?

  Thank you everyone

  The * PCI controller memory * Intel Turbo Memory is called a chip Flash cache logic Intel (Robson device).
  It s a new technology designed to support the new features of Vista.

  There is not driver for it for Windows XP because XP doesn t supports the function of cache, it is supported by Vista.

  The other unknown device could be everything; You may need to verify that the devices do not work. LAN, WLan, etc...

• Satellite Pro P200-15W: update according to BIOS 1.9 fans walk all the time

  I have a Satellite Pro P200-15W. After recently running the BIOS update to version 1.9, the fans started running all the time and are extremely loud. Also, he did weird things for Firefox, Thunderbird and NAV.

  I would like to "Uninstall" the update of the BIOS if possible. I found [this link: http://askiris.toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=1080 89xml & sliceId = & dialogid = 24408215 & stateId = 0% 200% 202 4406262] who treats the restore running CD.

  If I run this CD, which will certainly restore the BIOS to the previous version?

  Is there a less destructive way (ie: that does not erase the hard drive)?

  Thank you

  Ben

  Post edited by: cannboys

  Hello

  It seems that the picture of the fan was changed and renewed in the new version of BIOS, and so fans run fall.
  Why the table fan has been changed?

  Well, usually something like this is necessary to improve the reduction of the internal temperature while the CPU and GPU are running with maximum performance.
  This helps to prevent the equipment from damage!

  > would like to "Uninstall" the update of the BIOS if possible. I found this link that explains the running restore CD. If I run this CD, which will certainly restore the BIOS to the previous version?
  > Is there a less destructive way (ie: that does not erase the hard drive)?

  Usually, the recovery CD formats the whole HARD drive (partitions too) and installs only the image of Toshiba on the notebooks of HARD drive. The image contains the OS, drivers and additional software and has nothing to do with the BIOS update.
  But you can try to recover the laptop to see if you can solve the problems of software!

  If you want to reverse the BIOS, you will need to contact the ASP in your country!

  Sorry, but all I can suggest.

  Best regards

• Re: I need to change the CD/DVD drive in my Satellite Pro P200

  Hello

  I need to change the unit of DVD - RW in my Satellite Pro P200, but I 'don't know remove the old unit.

  Someone help me?

  Thank you.

  (Sorry for my English: S).

  Hello

  I advise you to visit this side:

  http://www.irisvista.com/tech/

  Note, if you don't find your model, you can see for others, who may be similar. 1 last thing, remove the battery and use gloves for protection (due to static), be careful with the holders of hidden

  Good luck!

• No software DVD player with my new Satellite Pro P200

  Just bought a new Satellite Pro P200 and, to my surprise and dismay, it has software player DVD No. inside? I downloaded the DVD drive on the official download here, but Vista abandoned the facility saying that I can not install the application. Have you tried to configure it as a Admin, but the same message is given running.

  Suggestions as to how I can get the software to run movies DVD on the new laptop computer would be most appreciated.

  The laptop is model is PSPB7E, it has Vista Business installed and has a HD-DVD drive installed.

  Would apprecate a response early to what I already plan to return this item, demanding a full refund since it seems that it does NOT use a software which SHOULD run (IE. Compatible versions of some software XP will simply not installed because Vista blocks!).

  Kamshot - discouraged by the new culture of 'Vista '!

  Hi Kam

  As far as I know every Toshiba laptop comes with pre-installed software allows you to watch DVD movies. It is a part of the standard installation and the application is called WinDVD.

  According to the specifications of the laptop, your laptop has no HD DVD player, just DVD-Super Multi (+ r DL). Because of this there is no HD DVD player.

  > Would apprecate a early response to what I already plan to return this item and requesting a full refund because it > seems that it does NOT use a software which SHOULD run

  No comments for this