Records navigation

Similar Questions

• Save the message to Record navigation

  Dear all
  
  When we run the query on a master form. All records are executed. When we press arrow on main volume down to navigate to the next record, we get a prompt message "do you want to save the changes you made.
  
  How this prompt can be deleted.
  
  "DBMS Message Level" does not work here.
  
  
  I will always be grateful
  
  Concerning

  Read this thread on the affects from query and cross-validation when the triggers:
      Message you want to change the modifications you made? caused by a lov

  You have probably a trigger based on query runs on the master or the retail block that is setting a value - even on null - for an element in the block. You should NOT change the values of the base table in a post request. And even if you set non-table of base fields, while this does not affect the status CHANGED, it causes all the triggers validation in the block to be executed during the process of application on each record. And in one of them, you have a code that is development of a field in the database table, which causes the status = CHANGED.

  And then you get the message "do you want to save.

  Often, I put this at the top of my triggers when-validate-point and when-validate-record:

    If :System.Mode='QUERY'
    Or :System.Record_status = 'NEW' then
      Return;
    End if;
  

  The above causes the validation process stops for querying and retrieval of records in your block.

• I accidentally deleted the funcion of the history navigation. How can I restor it

  How do I restore my shipping history function

  Hello

  In Internet Explorer, there is no way, you can restore or recover deleted browsing history. By default, the navigation history is saved in a temporary folder and once you delete the record navigation history is also empty.

  Alternatively, you can also publish this issue in Internet Explorer IT Pro TechNet Forums: Internet Explorer 8, 9, 10: http://social.technet.microsoft.com/Forums/en-US/ieitprocurrentver/threads

  Thank you.

• Field image cannot refresh when you move between records in a jsf page

  In jdev 12.1.2

  I have a formlayout in a jsf page, there is an af:image that bind to a url of the image file, the source code is like this:

  ("#{bindings.") Headpicurl.inputValue}')

  < f: facet = '3' tab name >

  < af:panelFormLayout id = "pfl1" >

  < af:inputText value = "#{bindings." Id.inputValue}"label =" #{bindings. " ID.hints.label}.

  required = "#{bindings." ReadOnly ID.hints.Mandatory}' = 'true '.

  columns = "#{bindings." Id.hints.displayWidth}.

  maximumLength = "#{bindings." ID.hints.Precision}.

  shortDesc = "#{bindings." ID.hints.ToolTip}"id ="it1">

  < f: validator binding = "#{bindings." ID. Validator} "/ >"

  < / af:inputText >

  < af:image shortDesc = "#{bindings." Headpicurl.hints.ToolTip}"id ="it4.

  source = "#{bindings." Headpicurl.inputValue} "/>"

  < f: facet name = "footer" >

  < af:panelGroupLayout layout = "horizontal" id = "pgl1" >

  < af:button actionListener = "#{bindings." First.Execute text}"="First"

  Disabled = "#{!}" bindings. PartialSubmit First.enabled}"="true"id ="b1"/ >

  < af:button actionListener = "#{bindings." Previous.Execute text}"="previous ".

  Disabled = "#{!}" bindings. PartialSubmit Previous.enabled}"="true"id ="b2"/ >

  < af:button actionListener = "#{bindings." Next.Execute text}"="next ".

  Disabled = "#{!}" bindings. PartialSubmit Next.enabled}"="true"id ="b3"/ >

  < af:button actionListener = "#{bindings." Last.Execute text}"="Last ".

  Disabled = "#{!}" bindings. PartialSubmit Last.enabled}"="true"id ="b4"/ >

  < / af:panelGroupLayout >

  < / f: facet >

  < / af:panelFormLayout >

  < / f: facet >

  But when I browse the records on the page, other areas will be update correctly, except for the field of the image - the image field showing will not refresh.

  Can someone help?

  Thank you.

  so I the records of buttons and update Navigation to set null values from Headpicurl to a valid value, the value of the PartialTriggers property of this image tag.

  Then, the page will be updated correctly for all areas, including the field of view when do the record navigation.

  But after I have erased the property PartialTriggers of this image tag and reload the page, or even restart the jdev, it still works OK now!

  -Then setting this property PartialTriggers the real cause of the previous question of no image field refresh?

  Well, you also updated your nulls to the actual URL so maybe posing (in combination with the caching of the browser)?

  General approach to prevent caching of web resources is the addition of random string to the url of the resource (as suggested by Cvele) or you can write custom servlet which will serve as a proxy and add http headers (non-cache, non-store, must-revalidate expires,...) to prevent caching.

  Anyway, now I have to get rid of the question above. However, a new problem emerges:

  When I update and validation records the attributes of the database. the fields in the jsf page will not display the newly modified database records even if I refreshed the browser or press F5.

  Only after that I open the jsf page in a new browser window, database changes will appear.

  -Is caused by the caching of the browser? and how to fix it?

  How you exactly "update and validation" records (in the same application or a different app/session)?

  If you do this session or different application then you must run query VO again.

  Dario

• Windows 7, Windows Media Center and the library of music/photos/videos folders

  I like the 'Libraries' feature in Windows 7.

  You know the one - one which includes "Public Images" and "My pictures" and what I want in a single 'Photos' folder in Explorer.

  However, it looks like Windows Media Center is tired directly according to the definitions in the library of my user id.

  If I remove 'My pictures' library of Windows Media Center, or even from my XBox 350 Media Center Extender in the living room.  It removes a library of images for my UserID on the PC.

  It's embarrassing. Because, in general, I want only the media center to search for media in public folders. But when records navigation using windows Explorer that I want to see too well 'My' and 'Public' files aggregated in libraries as usual.

  To sum up: how to configure Media Center to analyze only the public folders without changing the definitions of on my PC library to contain only public folders?

  If this can be done - can I at least do so the Extender sees only public folders and not mine, once it is configured? (I figured out how to do this, but it's a pain - add a new user name to the computer - configure the Extender by using that user - and then the extender will see not all documents under MY personal login at least.)

  Any suggestions?

  Hello

  I am sorry to say that there are no options to make the changes you need. Scans of Media Center places appears, at this point, is by design.

  Kind regards.

• Get the value of the primary key next or previous

  Hi guys,.
  
  I use this interactive report with a Get Next or previous primary key value process.
  This works very well if you do not filter anything, because it will take you to the next ID.
  
  BUT, I can do this job, so I only get the ID of the selected (using filters) lines?
  
  It is obvious that you would like to, in the hollow of the page, the results of the international registration instead of all records.
  
  Kind regards
  
  Bottom

  Hi Philippe,.
  I also went through the trouble of IR + disorders navigation of form and was very disappointed with the standard record Navigation. So, in the hope of finding a solution I trawled by google :) search results Fortunately, I found a blog of Simon Hunt, where he shares his solution with us (Blog of the SHUNT: http://simonhunt.blogspot.com/2009/12/next-and-prev-from-interactive-report-2.html).
  However, it was not enough for me, as I have many IRs with columns that have their display derived from a LOV values. His solution is great, a lot of pure sql to analyze :) Then, I took his code and adapted/customized to my needs. The steps are explained in a blog I did, where the code was included. http://tpetrus.blogspot.com/2012/03/record-navigation-in-Oracle-apex.html
  I've also set up a small example application here: http://apex.oracle.com/pls/apex/f?p=54687:30.

• Import list loses the record in the navigation menu

  Hello experts,

  I'm experimenting with more specific and APEX 5.0 component exports with export and import of lists.

  DEV, I have a list that is my navigation menu (user interface attributes > desktop > navigation menu > list of navigation menu).

  I add an entry to this list and make an export of this specific list pane only.

  In the TEST, I import this list into the same request with the same application ID and the ID workspace. The list of imports correctly and everything seems fine.

  Except that now my list is no longer my list of navigation menu. I need to change the attributes of user interface and reallocate this list as my navigation menu manually.

  Is this intentional behavior or my computer run into a problem here?

  For me, it's not intentional behaviour.

  I want to be able to update my list and there is record in the navigation menu without having to completely install my application.

  Any input/advice on that?

  Kind regards

  Bart

  Hi Bart,.

  This is a bug known, and followed with the bug # 22090477.

  Concerning

  Patrick

• Events shown in the range of navigation when you view the properties of the system for recording of JFR

  Which record the events shown in the range of navigation when you view the Properties tab system for a Java flight recorder? I'm guessing that they mark the time for JFR's writing of the events on the disk.

  I ask because, during the capture of a lot of information with the help of JFR, we see two effects that correlate with these events: (1) CPU usage ramps up a little bit between an event and the back then, level departure after each event, even if the application workload is constant; (2) the clock used to time stamp on all the events THAT JFR capture high-resolution seems to run more slowly in the period following immediately each of these events, perhaps for the period while JFR is written to disk. The slowdown of the clock appears as an increase in the rate of events shown in the range of navigation in other tabs - I also analyzed the events selected out of the original EN file to check their apparent rate.

  I see this on Java EE applications running on JBoss EAP 6.x on Java 7 on machines virtual small vSphere.

  The events shown in the navigotor range in any time must appear at the same time they are created. not when they are written to disk which can be a little later, depending on the settings.

  In the System Properties tab, you generally see a single spike per segment in your record. You should see the same thing if you go to the tabgroup events and enable only the Java Virtual Machine system property / Initial if Types discovered.

  As for the damages of its use and CPU timestamp, it sounds interesting.

  What exact version of Java 7 you use, there would be some bug fixes in later versions.

• Presentation of the form of the ADF - navigation by jumping the next record.

  I have a hard time trying to implement a feature using ADF. Please see my below use case and advise.
  Use case:
  To view the questions and capture responses (yes/no).
  
  I use a formatting for data (questions to show) collections and adding the Yes buttons, not to enter the answers. The part I'm having trouble is: based on the answer to a particular question, there may be questions void to the question of the mother who may or may not be displayed according to a business logic. All questions and sub-questions are in the same table. The subquestions should not be displayed, should I remove them from the collection of data, so that when I click on the button 'Next' to go to the next question of parent. How to hide or show not the few recordings following, in a collection of data with navigation controls and put in shape.
  Thank you.

  Your previous post has a possible answer. If you update an attribute on the records of the Sub, then when the user clicks the next button you can browse the lines and the value of the current row to the next question with the correct value of the attribute.

  You have an attribute - 'IsDisplayed. Answer to question 2 and press Next.

  (1) if the condition is met - set the IsDisplayed to 'False' flag on the issues 3 & 4.
  (2) crosses the lines until you find the record following IsDisplayed flag = "Y". In this case, it would record 5.
  (3) select this row as the current row in the collection.
  (4) at this stage, the form should display the current line (form 5)

• Navigation text record in Action?

  I try to save an Action in artificial intelligence, that when you change the text, will (1) at the end of the current line ([End]), (2) goes to the beginning of the current line while selecting the text ([Shift] + [Home]), (3) if applied to a sample, (4) drops by three lines ([down], [down], [down]), etc. When I record this in an action, only the command apply Swatch appears in Action. It's just how-it-is or y at - it a way to record the text navigation in action?

  
  Thank you.

  Action consists of steps that require human intervention and the applications and features not requiring human intervention. The elements you mentioned: (1) (2) (4) requires human intervention. If this cannot be automated in an action. Therefore, when you create the action, it will prompt you for your interaction with automation.

• How can I record the sessions of navigation and reopen it in Firefox 4?

  I don't have tools and options with all this that cutesy c * like FF used to have. FF4 has two bars of different option under Firefox Orange drop-down list menu, and another drop options to the bottom of the menu box options. So how the hell do I record a browsing session? So how do I open it again? Can I put this thing to reopen the last browsing tabs session as normal browsers do? And I can get this stuff without crushing the thing cursed every 5 minutes? Thank you-keimanzero

  For FF:
  ... Why I have to jump through obstacles to get the FF reload my previous session? Why change something that already works? "it works,
  
  SECOND OF ALL, if I close FF and then click on a link somewhere in a Microsoft Word, then FF will open it! and guess what? Restore previous session will be grayed out.
  ESPECIALLY, when you see "26 of 58 people found this answer helpful" that means that you...

  Here it says "Add image." I would have taken a dump, take a picture of it and put everything here... FF does not deserve my dump!

  Edited by a moderator because of the language. See the rules and lines guidelines .

• navigation block multi-record question

  Hello
  
  I have a block multi-record with 4 fields in each record. Each field has a LOV attached to it. When I select a value from the LOV to the 1st field, the 'control' should go to the next field (ie., the slider should move to the 2nd field).
  
  How can I do this?
  
  Thank you
  Chiru

  No need for any trigger, set the automatic 'Skip' property for the LoV to 'yes '.

• tab navigation between multiple Records

  Hey guys...
  
  How can I navigate between point 1, sheet 1, point 2, case 1... then back to article 1, record 2... then, in section 2, save 2 etc. ?
  
  Then, after the last record, in article 2, point 3?
  
  Does make sense? It is easy to navigate between elements and blocks w/o multiple records by using the KEY-NEXT-ITEM and the GO_ITEM, BLOCK etc, but I have problems to tab backward between records in the block element.
  
  Published by: Mark fouad on November 6, 2008 09:22

  Place the following code in the KEY-NEXT-trigger POINT on the response field:

  IF :SYSTEM.TRIGGER_RECORD<3 THEN
    NEXT_RECORD;
    GO_ITEM('QUESTION');
  ELSE
    -- wherever you want to go to
  END IF;
  

  Place the following code in the KEY-PREV-trigger POINT on the response field:

  IF :SYSTEM.TRIGGER_RECORD=1 THEN
    -- wherever you want to go to
  ELSE
    PREVIOUS_RECORD;
    GO_ITEM('ANSWER');
  END IF;
  

  I hope this helps.

• Add records to "Favorite links" in the Windows Explorer Navigation.

  I can't drag or insert or add all the folders under favorite links in Explorer window.  When I open the Explorer window (by pressing the windows key and the E key), the Explorer window opens.  The favorite links area is (empty) in blue, and the words, favorite links, are grey.  When I try to drag a folder to the favorite links area, it is not drag, and a red circle with a line through it appears.  Help, please.

  I can't drag or insert or add all the folders under favorite links in Explorer window.  When I open the Explorer window (by pressing the windows key and the E key), the Explorer window opens.  The favorite links area is (empty) in blue, and the words, favorite links, are grey.  When I try to drag a folder to the favorite links area, it is not drag, and a red circle with a line through it appears.  Help, please.

  Hello

  Open Windows Explorer and navigate to the C:\Users\yourname\Links folder. Right-click in the folder, and select new/shortcut. Create a shortcut to a local folder.

  Close Windows Explorer and open it again to see if this shortcut will appear in the Favorites.

  If this does not work, go to the folder/organize and search options. Click the Display tab and make sure that Show Hidden files, folders, and drives is selected.

  Make sure that Hide extensions of known file types and Hide protected operating system files are not selected. Click apply/OK.

  Close and reopen agin Windows Explorer, place you in the links folder and see if there is a file named Desktop.ini into this folder.

  Let us know.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• on my laptop running windows 7 more information disappeared from the window - topics (file, publishing, display, etc.), address bar and navigation buttons - everything I can see tabs - how do the lack of points to display

  Missing on my laptop running windows 7, all the info displayed at the top of the home page. All headings, i. e. file, change the view etc. disappeared. There is no address bar. There is no "home button", the button refresh, etc.. My wife was using the machine when it happened, so I don't know what she was doing. How to restore these features?

  most of the information has disappeared from the window - topics (file, publishing, display, etc.), address bar and navigation buttons

  When all the toolbars are missing, you are probably in full screen view, press F11 to toggle mode full-screen, or you can move the cursor to the top of the screen.

  The real problems you describe all set thanks to an extension and customization, see 01:10 steps later...

  You can make Firefox 5.0 looks not like Firefox 3.6.19, see numbered 1 to 10 points in the next topic difficulty Firefox 4.0 UI toolbar, problems (Make Firefox 5.0, or 4.0.1 resemble 3.6). If you make changes, you must be aware of what has changed and what it takes to use changed or missing features.

  • http://dmcritchie.MVPs.org/Firefox/Firefox-problems.htm#fx4interface

  It is much more beyond these first 10 steps in the list, if you want to make Firefox more functional.

  Toolbars and their contents have been rearranged and buttons have been merged dual-use, the net result is that I could see about 25% of what I had before and recorded about 10% of the area of the toolbar with great loss of functionality to hide things that might already be hidden and to create confusing buttons that already have keyboard shortcuts and don't need to be seen. The only good thing that has been ' Ctrl + / ' has been added to hide/show the modules bar that has not replaced the status bar.